A Highly Stable Luminescent Eu-MOF Exhibiting Efficient Response to Nitrofuran Antibiotics through the Inner Filter Effect and Photoinduced Electron Transfer

Metal-organic framework-based nanomaterials as opto-electrochemical sensors for the detection of antibiotics and hormones: A review

Increasing trace levels of antibiotics and hormones in the environment and food samples are concerning and pose a threat. Opto-electrochemical sensors have received attention due to their low cost, portability, sensitivity, analytical performance, and ease of deployment in the field as compared to conventional expensive technologies that are time-consuming and require experienced professionals. Metal-organic frameworks (MOFs) with variable porosity, active functional sites, and fluorescence capacity are attractive materials for developing opto-electrochemical sensors. Herein, the insights into the capabilities of electrochemical and luminescent MOF sensors for detection and monitoring of antibiotics and hormones from various samples are critically reviewed. The detailed sensing mechanisms and detection limits of MOF sensors are addressed. The challenges, recent advances, and future directions for the development of stable, high-performance MOFs as commercially viable next-generation opto-electrochemical sensor materials for the detection and monitoring of diverse analytes are discussed.

Shape memory luminescent cellulose/chitosan hydrogel for high sensitive detection of formaldehyde

Hybrid hydrogels containing biomacromolecules have been widely used in sensors, fluorescent probes, and other fields due to their high biocompatibility and nontoxicity. In this paper, tough hydrogels with interconnected macro-pores have been fabricated by freeze-induced chemical cross-linking of microfibrillated cellulose (MFC) and organic modified chitosan (CS). In this hydrogel materials, three-dimensional networks were formed by abundant hydrogen bonds and chemical cross-linking. Luminescent lanthanide complexes were covalently bonded to the hydrogel networks through coordination of Eu³⁺ ions with 2, 3-pyridine dicarboxylic acid modified chitosan. The luminescence of hydrogel materials was further improved by the replacement of coordination water with 2-thiophenyltrifluoroacetone (TTA). The prepared hydrogels showed excellent shape memory properties both under water and in air. The stress of the hybrid hydrogel at 80 % strain can reach 159 kPa, which is much higher than that of the traditional microfibrillated cellulose-based hydrogels. The obtained luminescent hybrid hydrogels exhibited an excellent fluorescence detection effect on formaldehyde. The detection limit for formaldehyde is 45.7 ppb, which is much lower than the WHO standard (80 ppb for indoor air). The novel, facile preparing procedure may extend the potential applications of hybrid lanthanide luminescent hydrogel as fluorescence probes for pollution monitoring, especially for formaldehyde and other organic aldehydes.

Cane Molasses Derived N-Doped Graphene Quantum Dots: Dynamic Quenching Synergistically Photoinduced Electron Transfer for the Instant Detection of Nitrofuran Antibiotics

The development of a highly selective, simple, and rapid detection method for nitrofuran antibiotics (NFs) is of great significance for food safety, environmental protection, and human health. To meet these needs, in this work, cyan-color highly fluorescent N-doped graphene quantum dots (N-GQDs) were synthesized using cane molasses as the carbon source and ethylenediamine as the nitrogen source. The synthesized N-GQDs have an average particle size of 6 nm, a high fluorescence intensity with 9 times that of undoped GQDs, and a high quantum yield (24.4%) which is more than 6 times that of GQDs (3.9%). A fluorescence sensor based on N-GQDs for the detection of NFs was established. The sensor shows advantages of fast detection, high selectivity, and sensitivity. The limit of detection for furazolidone (FRZ) was 0.29 μM, the limit of quantification (LOQ) was 0.97 μM, and the detection range was 5-130 μM. The fluorescence quenching mechanism of the sensor was explored by fluorescence spectroscopy, UV-vis absorption spectroscopy, Stern-Volmer quenching constant, Zeta potential, UV-vis diffuse reflectance spectroscopy, and cyclic voltammetry. A fluorescence quenching mechanism of dynamic quenching synergized with photoinduced electron transfer was revealed. The developed sensor was also successfully applied for detecting FRZ in various real samples, and the results were satisfactory.

Rapid determination of illegally added Sudan I in cake by triphenylamine functionalized polyhedral oligomeric silsesquioxane fluorescence sensor

Triphenylamine functionalized polyhedral oligomeric silsesquioxane (POSS@TPA) was prepared using the Friedel-Crafts reaction with tris(4-bromophenyl)amine (TPA) as the functional monomer and polyhedral oligomeric silsesquioxane (POSS) as the framework. The as-prepared POSS@TPA has a stable structure and accomplished pore performance, allowing for the selective adsorption of Sudan I and result in the fluorescence quenches of POSS@TPA. Thus, the POSS@TPA could be used as sensors to fluorescence detect 0.12-7.4 mg/L Sudan I, with a detection limit of 0.091 mg/L. Moreover, the POSS@TPA have good reuseability can be reused more than 5 cycles after washing. Noteworthily, the response time of POSS@TPA for determination was as short as 1 min. Furthermore, the sensor was effectively used to determine Sudan I in cakes with excellent recoveries (86.4-108.8 %) and relative standard deviations (2.5-4.9 %). The results matched those of high-performance liquid chromatography (HPLC). Our work shows great potential in terms of the rapid detection of food safety.

Fluorescent Sensing of Ciprofloxacin and Chloramphenicol in Milk Samples via Inner Filter Effect and Photoinduced Electron Transfer Based on Nanosized Rod-Shaped Eu-MOF

Rapid, facile, and accurate detection of antibiotic residues is vital for practical applications. Herein, we designed a sensitive, visual, and rapid analytical method for sensitive detection of ciprofloxacin and chloramphenicol based on a nanosized rod-shaped Europium metal organic framework (Eu-MOF). The fluorescent Eu-MOF was firstly synthesized by a simple synthetic route at room temperature, which displays a red emission. The mechanisms of detecting ciprofloxacin and chloramphenicol were confirmed to be the inner filter effect (IFE) and photoinduced electron transfer (PET). Under the optimized experimental conditions, the detection limits of the developed method for ciprofloxacin and chloramphenicol detection were 0.0136 and 3.16 μM, respectively. Moreover, the sensor was effectively applied for quantitative determination of ciprofloxacin and chloramphenicol milk samples with satisfactory recoveries of 94.5-102% and 97-110%, respectively. This work developed a new method for rapid detection of ciprofloxacin and chloramphenicol residues. In addition, the established method has potential practical application value for on-site safety regulation on antibiotic residues in animal-derived food.

Temperature- and solvent-induced reversible single-crystal-to-single-crystal transformations of TbIII-based MOFs with excellent stabilities and fluorescence sensing properties toward drug molecules

Recently, single-crystal-to-single-crystal conversion has been a hot topic in the field of metal-organic framework (MOF) materials, which could improve the stability and properties due to the structural change. A new...

Dual-Functional Metal-Organic Framework for Luminescent Detection of Carcinoid Biomarkers and High Proton Conduction

It remains a challenge to exploit dual-functional metal-organic frameworks (MOFs) for applications, including luminescence detection and proton conduction. With the deliberate selection of the bifunctional organic ligand 5-sulfoisophthalic acid monosodium salt (NaH₂bts), and the phosphonic acid ligand N,N'-piperazine (bismethylenephosphonic acid; H₄L), a robust three-dimensional (3D) noninterpenetrating dual-functional MOF, [Tb(H₂L)(H₂bts)(H₂O)]·H₂O (1), has been synthesized hydrothermally. On the basis of the excellent thermal and chemical as well as superior luminescence stabilities in water and solutions with different pHs, 1 can serve as the simple, rapid, and highly selective and sensitive luminescence detection of the carcinoid biomarkers 5-hydroxytryptamine (HT) and its metabolite 5-hydroxyindole-3-acetic acid (HIAA) with detection limits of nanomolar magnitude in water and in simulated blood plasma and urine systems. Due to the change in the signals that could be readily differentiated by the naked eye under a UV lamp, a portable test paper has been developed. The probable quenching mechanisms are discussed in detail. In addition, a great number of hydrogen-bonding networks are formed among the uncoordinated carboxylic oxygen atoms, sulfonate oxygen atoms, protonated nitrogen atoms, and water molecules, which provide potential proton-hopping sites for proton conduction, leading to a maximum proton conductivity of 2.3 × 10^-4 S cm^-1 at 368 K and 95% relative humidity. The above results suggest that rationally designed dual-functional MOFs can open an avenue for the development of occupational diagnostic tools and alternative energy technology.

Nanomolar determination of nitrofurans in water via excited-state inter-ligand proton transfer

Qualification and quantification of trace organic contaminants necessitates development of highly efficient sensing system, where excited-state inter-ligand proton transfer (ESILPT) provides a feasible pathway to construct efficient chemo-sensors. Herein, a strategically synthesized lanthanide complex, Eu(DBM)₃(MeOH)₃ (briefly as Eu-DBM-MeOH; DBM = dibenzoylmethane), features two-step ESILPT processes, along with modification on molecular structure and energy band. As a result, Eu-DBM-MeOH exhibits excellent photophysical properties with characteristic luminescence of Eu³⁺ ion. Benefiting from these merits, the Eu-DBM-MeOH complex acts as ultra-sensitive chemo-sensor toward nanomolar-level nitrofuran antibiotics (nitrofurazone and nitrofurantoin) in water, by disrupting ESILPT processes. Combining the advantages on photophysical property and luminescent sensitivity, ESILPT-active compounds are expected to widen and deepen the research on complex-based luminophores, being potentially useful in trace detection and biological imaging.

Tetraphenylethene Functionalized Polyhedral Oligomeric Silsesquioxane Fluorescent Probe for Rapid and Selective Trifluralin Sensing in Vegetables and Fruits

A novel fluorescent probe was designed and synthesized from tetraphenylethene (TPE) and polyhedral oligomeric silsesquioxanes (POSS) via Heck-palladium catalyzed cross-coupling reaction. The as-synthesized TPE functionalized probe performed good solvent stability and selectively preconcentration capability towards target analyte due to its stable structure and the adsorption property. The morphology as well as the physical and chemical properties of the POSS@TPE were carefully characterized. The POSS@TPE was employed to develop an effective fluorescent probe for trifluralin, with a response range of 0.1-80 mg/kg and a detection limit of 0.102 mg/kg. The mixed mechanisms of inner-filter effect (IFE) and photoinduced electron transfer (PET) explain the selectivity of POSS@TPE. Rapid detection for trifluralin in tomato and celery has been achieved with recoveries between 99.4-120.7% (RSD≤3.4%), and the results were verified compared with GC-MS method.

Efficient Gas and VOC Separation and Pesticide Detection in a Highly Stable Interpenetrated Indium-Organic Framework

The new indium-based organic framework {(Me₂NH₂)[In(BDPO)]·DMF·2H₂O}_n (1) was successfully constructed by using the oxalamide group modified ligand N,N'-bis(isophthalic acid)oxalamide (H₄BDPO). This framework presents a 2-fold interpenetrating structural characteristic, and the unique polar pore environment leads to a high capture ability for CO₂, C₂H_n and CH₃OH and good separation ability for CO₂ and C₂H_n over CH₄ as well as for CH₃OH over C₂H₅OH, which was further verified by an ideal adsorbed solution theory (IAST) calculation. Theoretical simulations pointed out the possible adsorption sites of different adsorbed gases in 1. In addition, the excellent chemical stability and strong luminescence of 1 give it an effective selective detection ability for 2,6-dichloro-4-nitroaniline (DCN) in water with a low detection limit of 3.85 ppm, and the detection mechanism is discussed in detail.

A Water-Stable Tb-MOF As a Rapid, Accurate, and Highly Sensitive Ratiometric Luminescent Sensor for the Discriminative Sensing of Antibiotics and D2O in H2O

The design and development of self-calibrating ratiometric luminescent sensors for the fast, accurate, and sensitive discrimination and determination of pollutants in wastewater is highly desirable for public and environmental health. Herein, a 3D porous Tb(III)-based metal-organic framework (MOF), {[Tb(HL)(H₂O)₂]·x(solv)}_n (1), was facilely synthesized using a urea-functionalized tetracarboxylate ligand, 5,5'-(((1,4-phenylenebis(azanediyl))bis(carbonyl))bis(azanediyl))diisophthalic acid (H₄L). The activated framework showed a good water stability in both aqueous solutions at a wide pH range of 2-14 and simulated antibiotic wastewaters. Interestingly, this Tb-MOF exhibited dual luminescence owing to the partial energy transfer from the antenna H₄L to Tb³⁺. More importantly, activated 1 (1a) that was dispersed in water showed a fast, accurate, and highly sensitive discrimination ability toward antibiotics with a good recyclability, discriminating three different classes of antibiotics from each other via the quenching or enhancement of the luminescence and tuning the emission intensity ratio between the H₄L ligand and the Tb³⁺ center for the first time. Simultaneously, 1a is a ratiometric luminescent sensor for the rapid, accurate, and quantitative discrimination of D₂O from H₂O. Furthermore, this complex was successfully used for the effective determination of antibiotics and D₂O in real water samples. This work indicates that 1a represents the first ever MOF material for the discriminative sensing of antibiotics and D₂O in H₂O and promotes the practical application of Ln-MOF-based ratiometric luminescent sensors in monitoring water quality and avoiding any major leak situation.

Highly Fluorescent Cadmium Based Metal-Organic Frameworks for Rapid Detection of Antibiotic Residues, Fe3+ and Cr2O72- Ions

Here, two novel 3D Cd(II)-MOFs, [Cd₃·L·(BTB)₂·2DMF] and [(Cd₃O₂)·L·BTC] (denoted as CUST-532 and CUST-533, L = 9,10-bis(N-benzimidazolyl)-anthracene, BTB = 1,3,5-tris(4-carboxyphenyl) benzene, BTC = 1,3,5-benzenetricarboxylic acid, CUST = Changchun University of Science and Technology), were synthesized by solvothermal conditions. Both CUST-532 and CUST-533 are 3D (3,8)-c topological nets with the same point symbol of {4³}₂{4⁶·6¹⁸·8⁴}. PXRD and TGA analyses prove that CUST-532 and CUST-533 have good structural stability and thermal stability. On the basis of the high fluorescence characteristics, the results of fluorescence sensing experiments show that CUST-532 and CUST-533 can be used as multifunctional chemical sensors to achieve rapid fluorescence quenching response to antibiotic residues, Fe³⁺ and Cr₂O₇^2- ions at a much lower concentration. Furthermore, the possible mechanisms of fluorescence quenching in the sensing process were systematically studied by PXRD, UV-vis, fluorescence decay lifetime, and density functional theory.

Spectrofluorimetric determination of Cr(VI) and Cr(III) by quenching effect of Cr(III) based on the Cu-CDs with peroxidase-mimicking activity

The study presents a spectrofluorimetric method for the determination of Cr(III) based on 2,3-diaminophenazine (DAP) as fluorescent nano sensor. With the peroxidase-mimicking activity of copper-doped carbon dots (Cu-CDs), colorless o-phenylenediamine (OPD) was oxidized to fluorescent DAP in the presence of H₂O₂ via generation of hydroxyl radicals. The Cr(III) was found to decrease the fluorescent intensity of the Cu-CDs-mediated OPD oxidation system. Cr(VI) species were reduced to Cr(III) by employing 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonate) (ABTS) as the reductant, and a novel spectrofluorimetric method for the highly sensitive detection of speciation Cr(VI) and Cr(III) was developed. The Cu-CDs nanozyme was prepared from ethylenediaminetetraacetic acid copper disodium salt (Na₂[Cu (EDTA)]) by one-step pyrolysis method. Under optimal conditions, the fluorescence intensity of DAP is linearly proportional to the Cr(III) ion concentration in the range of 5 × 10^-6 to 1.5 × 10^-4 mol L^-1 and the detection limit is 1.2 × 10^-7 mol L^-1. The method has a good anti-interference performance against some metal ions, such as, Hg²⁺, Co²⁺, Cu²⁺, Mg²⁺, Ba²⁺, K⁺, Mn²⁺, Ni²⁺, Al³⁺, and Fe³⁺. The proposed method was successfully applied in the determination of Cr(VI) and Cr(III) in water samples.

Uncovering the actual inner-filter effect between highly efficient carbon dots and nitroaromatics

High performance sensors can be produced by adequately designing the chemical structure and uncovering the actual detection mechanism. In this study, a fluorescent probe was synthesized for various nitroaromatic molecules, including stereochemically varied nitrophenols and nitroaniline. A systematic investigation of the influence of various analytes on the luminescence behavior of the as-synthesized carbon dot (CDs) revealed the inner-filter effect to be the major detection mechanism. The extinction coefficient and spectral overlap were found to be the critical parameters for high sensitivity and good selectivity rather than the functional groups of the CDs and analytes.

State of the art methods and challenges of luminescent metal–organic frameworks for antibiotic detection

This review focuses on recent developments in the design and synthesis of luminescence MOFs for monitoring antibiotics.