Recent advances in aluminum compounds for catalysis

Aluminum in Frustrated Lewis Pair Chemistry

This review article describes the development of the use of aluminum compounds in the chemistry of frustrated Lewis pairs (FLPs) over the last 14 years. It also discusses the synthesis, reactivity and catalytic applications of intermolecular, intramolecular and so-called hidden FLPs with phosphorus, nitrogen and carbon Lewis bases. The intrinsically higher acidity of aluminum compounds compared to their boron analogs opens up different reaction pathways. The results are presented in a more or less chronological order. It is shown that Al FLPs react with a variety of polar and non-polar substrates and form both stable adducts and reversibly activate bonds. Consequently, some catalytic applications of the title compounds were presented such as dimerization of alkynes, hydrogenation of tert-butyl ethylene and imines, C-F bond activation, reduction of CO2, dehydrogenation of amine borane and transfer of ammonia. In addition, various Al FLPs were used as initiators in polymerization reactions.

Synthesis and catalytic application of a donor-free bismuthenium cation

Herein, we report the synthesis and catalytic application of a new N,N'-dineopentyl-1,2-phenylenediamine-based bismuthenium cation (3). 3 has been synthesized via the treatment of chlorobismuthane LBiCl [L = 1,2-C6H4{N(CH2tBu)}2] (2) with AgSbF6, and was further used as a robust catalyst for the cyanosilylation of ketones under mild reaction conditions. Experimental studies and DFT calculations were performed to understand the mechanistic pathway.

Expanding the Scope of Aluminum Chemistry with Noninnocent Ligands

ConspectusAluminum is the most abundant metal in the earth's crust at 8%, and it is also widely available domestically in many countries worldwide, which ensures a stable supply chain. To further the applications of aluminum (Al), such as in catalysis and electronic and energy storage materials, there has been significant interest in the synthesis and characterization of new Al coordination compounds that can support electron transfer (ET) and proton transfer (PT) chemistry. This has been achieved using redox and chemically noninnocent ligands (NILs) combined with the highly stable M(III) oxidation state of Al and in some cases the heavier group 13 ions, Ga and In.When ligands participate in redox chemistry or facilitate the breaking or making of new bonds, they are often termed redox or chemically noninnocent, respectively. Al(III) in particular supports rich ligand-based redox chemistry because it is so redox inert and will support the ligand across many charge and protonation states without entering into the reaction chemistry. To a lesser extent, we have reported on the heavier group 13 elements Ga and In, and this chemistry will also be included in this Account, where available.This Account is arranged into two technical sections, which are (1) Structures of Al-NIL complexes and (2) Reactivity of Al-NIL complexes. Highlights of the research work include reversible redox chemistry that has been enabled by ligand design to shut down radical coupling pathways and to prevent loss of H2 from unsaturated ligand sites. These reversible redox properties have in turn enabled the characterization of Class III electron delocalization through Al when two NIL are bound to the Al(III) in different charge states. Characterization of the metalloaromatic character of square planar Al and Ga complexes has been achieved, and characterization of the delocalized electronic structures has provided a model within which to understand and predict the ET and PT chemistry of the NIL group 13 compounds. The capacity of Al-NIL complexes to perform ET and PT has been employed in reactions that use ET or PT reactivity only or in reactions where coupled ET/PT affords hydride transfer chemistry. As an example, ligand-based PT reactions initiate metal-ligand cooperative bond activation pathways for catalysis: this includes acceptorless dehydrogenation of formic acid and anilines and transfer hydrogenation chemistry. In a complementary approach, ligand based ET/PT chemistry has been used in the study of dihydropyridinate (DHP-) chemistry where it was shown that N-coordination of group 13 ions lowers kinetic barriers to DHP- formation. Taken together, the discussion presented herein illustrates that the NIL chemistry of Al(III), and also of Ga(III) and In(III) holds promise for further developments in catalysis and energy storage.

Catalytic hydroboration of aldehydes and ketones with an electron-rich acyclic metallasilylene

The application of main group metal complexes in catalytic reactions is of increasing interest. Here we show that the electron-rich, acyclic metallasilylene L'(Cl)GaSiL C (L' = HC[C(Me)NDipp]2, Dipp = 2,6-iPr2C6H3; L = PhC(NtBu)2) acts as a precatalyst in the hydroboration of aldehydes with HBPin. Mechanistic studies with iso-valeraldehyde show that silylene C first reacts with the aldehyde with [2 + 1] cycloaddition in an oxidative addition to the oxasilirane 1, followed by formation of the alkoxysilylene LSiOCH[Ga(Cl)L']CH2CHMe2 (2), whose formation formally results from a reductive elimination reaction at the Si center. Alkoxysilylene 2 represents the active hydroboration catalyst and shows the highest catalytic activity with n-hexanal (reaction time: 40 min, yield: >99%, TOF = 150 h-1) at room temperature with a catalytic load of only 1 mol%. Furthermore, the hydroboration reaction catalysed by alkoxysilylene 2 is a living reaction with good chemoselectivity. Quantum chemical calculations not only provide mechanistic insights into the formation of alkoxysilylene 2 but also show that two completely different hydroboration mechanisms are possible.

Diversity of transformation of heteroallenes on acenaphthene-1,2-diimine aluminum oxide

The reactions of oxide [(dpp-bian)Al(μ2-O)2Al(dpp-bian)] (1) (dpp-bian = 1,2-bis[(2,6-diisopropylphenyl)imino]acenaphthene) with phenyl- or cyclohexylisocyanates result in the formation of carbonimidate derivatives [(dpp-bian)Al(μ-O)(μ-RNCO2)Al(dpp-bian)] (R = Ph, 2; Cy, 3). Addition of N,N'-dicyclohexylcarbodiimide to compound 1 leads to the formation of ureate complex [(dpp-bian)Al(μ-O)(μ-(CyN)2CO)Al(dpp-bian)] (4). The reactions of the oxide 1 with pinacolborane and catecholborane afford oxo-bridged hydride [{(dpp-bian)Al(H)}(μ-O){Al(OBpin)(dpp-bian)}] (5) and compound [{(dpp-bian)Al(OBCat)}2(μ-O)] (7), respectively. Insertion of cyclohexylisocyanate into the Al-H bond of compound 5 gives CO insertion product [{(dpp-bian)Al(OC(H)NCy)}(μ-O){Al(OBpin)(dpp-bian)}] (6). New compounds have been characterized by ESR and IR spectroscopy; their molecular structures have been established by single-crystal X-ray analysis. The oxide 1 serves as a catalyst for the hydroboration of heteroallenes (isocyanates, carbodiimides) with pinacolborane.

Novel bidentate N-coordinated alkylaluminum complexes: synthesis, characterization, and efficient catalysis for hydrophosphonylation

Five new alkylaluminum complexes with different pyridinyl-substituted imines or cyclohexyl-substituted imines were synthesized and characterized successfully. The aluminum complex [FlCHNCH(CH3)Py]AlMe2(Py = 2-pyridyl) (1) was obtained by reacting 9-[2-pyridyl-CH(CH3)-NCH]Fl (Fl = fluorenyl) (L1) and equimolar AlMe3. The reactions of 9-(2-pyridyl-NCH)Fl (L2) and 9-[2-N(CH3)2-cyclohexyl-NCH]Fl (L3) with equimolar AlMe3 or AlEt3 afforded other alkylaluminum complexes [FlCHNPy]AlMe2(Py = 2-pyridyl) (2), [FlCHNPy]AlEt2 (Py = 2-pyridyl) (3), [FlCHNCyN(CH3)2]AlMe2 (Cy = 2-cyclohexyl) (4) and [FlCHNCyN(CH3)2]AlEt2 (Cy = 2-cyclohexyl) (5). All these complexes (1-5) were characterized using NMR spectroscopy, elemental analysis, and X-ray crystal structure analysis. The catalytic properties of these new alkylaluminum complexes for the hydrophosphonylation of aldimines were examined. Complex 5 showed the best catalytic performance under mild reaction conditions with a low catalyst loading (1 mol%), and 20 different substituents of aldimines were isolated with more than 90% yields.

Quo Vadis CO2 Activation: Catalytic Reduction of CO2 to Methanol Using Aluminum and Gallium/Carbon-based Ambiphiles

We report on so-called "hidden FLPs" (FLP: frustrated Lewis pair) consisting of a phosphorus ylide featuring a group 13 fragment in the ortho position of a phenyl ring scaffold to form five-membered ring structures. Although the formation of the Lewis acid/base adducts was observed in the solid state, most of the title compounds readily react with carbon dioxide to provide stable insertion products. Strikingly, 0.3-3.0 mol% of the reported aluminum and gallium/carbon-based ambiphiles catalyze the reduction of CO2 to methanol with satisfactory high selectivity and yields using pinacol borane as stoichiometric reduction equivalent. Comprehensive computational studies provided valuable mechanistic insights and shed more light on activity differences.

Flexible NHC-aryloxido aluminum complex and its zwitterionic imidazolium aluminate precursor in ring-opening polymerization of ε-caprolactone

Anionic donor-functionalized NHC (N-heterocyclic carbene) complexes of Al are rare. We report one such case here, an NHC-aryloxido AlMe2 complex [Al(L)Me2] (2), following a stepwise synthesis from the proligand [HO-4,6-tBu2-C6H2-2-CH2{CH(NCHCHNAr)}]Br [LH2Br; Ar = 2,6-iPr2-C6H3 (Dipp)] and AlMe3via the zwitterionic intermediate [Al(LH)Me2Br] (1). The ligand's flexibility in 2 is evident from the conformational fluxionality revealed by VT-1H NMR spectroscopic analysis. The ∠O-Al-C (ca. 100.5°) bite angle is also wider than the ∠O-Ti-C (ca. 80.6°) as seen in our recently reported Ti complex [Ti(L)(NMe2)2Br]. DFT analysis showed that the CNHC-Al bond is significantly ionic, as is the CNHC-Ti bond. Both 1 and 2 are active in the ring-opening polymerization (ROP) of ε-caprolactone (CL). 2, similar to [Ti(L)(NMe2)2Br], exhibits bifunctional MLC-type monomer activation, but only at an elevated temperature. However, the 2/BnOH combination is catalytically active at room temperature, likely through a zwitterionic [Al(LH)Me2(OBn)]. The 1/BnOH combination follows a similar mechanism but surprisingly at a faster rate.

Gallium(III)- and Indium(III)-Containing Ionic Liquids as Highly Active Catalysts in Organic Synthesis

The chemical industry still requires development of environmentally friendly processes. Acid-catalysed chemical processes may cause environmental problems. Urgent need to replace conventional acids has forced the search for sustainable alternatives. Metal-containing ionic liquids have drawn considerable attention from scientists for many years. These compounds may exhibit very high Lewis acidity, which is usually dependent on the composition of the ionic liquid with the particular content of metal salt. Therefore, metal-containing ionic liquids have found a lot of applications and are successfully employed as catalysts, co-catalysts or reaction media in various fields of chemistry, especially in organic chemistry. Gallium(III)- and indium(III)-containing ionic liquids help to transfer the remarkable activity of metal salts into even more active and easier-to-handle forms of ionic liquids. This review highlights the wide range of possible applications and the high potential of metal-containing ionic liquids with special focus on Ga(III) and In(III), which may help to outline the framework for further development of the presented research topic and synthesis of new representatives of this group of compounds.