Synthesis of polyurethanes through the oxidative decarboxylation of oxamic acids: a new gateway toward self-blown foams

Polyurethane (PU) thermoplastics and thermosets were prepared through the step-growth polymerization of in situ generated polyisocyanates through the decarboxylation of polyoxamic acids, in the presence of phenyliodine diacetate (PIDA), and polyols. The CO2 produced during the reaction allowed the access to self-blown polyurethane foams through an endogenous chemical blowing. The acetic acid released from ligand exchange at the iodine center was also shown to accelerate the polymerization reaction, avoiding the recourse to an additional catalyst. Changing simple parameters during the production process allowed us to access flexible PU foams with a wide range of properties.

Biocatalyzed Synthesis of Flavor Esters and Polyesters: A Design of Experiments (DoE) Approach

In the present work, different hydrolases were adsorbed onto polypropylene beads to investigate their activity both in short-esters and polyesters synthesis. The software MODDE^® Pro 13 (Sartorius) was used to develop a full-factorial design of experiments (DoE) to analyse the thermostability and selectivity of the immobilized enzyme towards alcohols and acids with different chain lengths in short-esters synthesis reactions. The temperature optima of Candida antarctica lipase B (CaLB), Humicola insolens cutinase (HiC), and Thermobifida cellulosilytica cutinase 1 (Thc_Cut1) were 85 °C, 70 °C, and 50 °C. CaLB and HiC preferred long-chain alcohols and acids as substrate in contrast to Thc_Cut1, which was more active on short-chain monomers. Polymerization of different esters as building blocks was carried out to confirm the applicability of the obtained model on larger macromolecules. The selectivity of both CaLB and HiC was investigated and best results were obtained for dimethyl sebacate (DMSe), leading to polyesters with a M_w of 18 kDa and 6 kDa. For the polymerization of dimethyl adipate (DMA) with BDO and ODO, higher molecular masses were obtained when using CaLB onto polypropylene beads (CaLB_PP) as compared with CaLB immobilized on macroporous acrylic resin beads (i.e., Novozym 435). Namely, for BDO the M_n were 7500 and 4300 Da and for ODO 8100 and 5000 Da for CaLB_PP and for the commercial enzymes, respectively. Thc_Cut1 led to polymers with lower molecular masses, with M_n < 1 kDa. This enzyme showed a temperature optimum of 50 °C with 63% of DMA and BDO when compared to 54% and 27%, at 70 °C and at 85 °C, respectively.

From the Synthesis of Biobased Cyclic Carbonate to Polyhydroxyurethanes: A Promising Route towards Renewable Non-Isocyanate Polyurethanes

With a global production of around 18 million tons (6th among all polymers) and a wide range of applications, such as rigid and soft foams, elastomers, coatings, and adhesives, polyurethanes (PUs) are a major polymer family. Nevertheless, they present important environmental and health issues. Recently, new and safer PUs, called non-isocyanate polyurethanes (NIPUs), have become a promising alternative to replace conventional PUs. Sustainable routes towards NIPUs are discussed herein from the perspective of green chemistry. The main focus is on the reaction between biobased carbonates and amines, which offers an interesting pathway to renewable polyhydroxyurethanes (PHUs). An overview of different routes for the synthesis of PHUs draws attention to the green synthesis of cyclic carbonate (CC) compounds and the aminolysis reaction. Current state-of-the-art of different biobased building blocks for the synthesis of PHUs focuses on CC compounds. Three classes of compounds are defined according to the feedstock: 1) vegetable fats and oils, 2) starch and sugar resources, and 3) wood derivatives. Finally, biobased PHU properties are discussed.

Hydrophobe-free miniemulsion polymerization: towards high solid content of fatty acid-based poly(urethane-urea) latexes

High solid content of aqueous fatty acid-based PU latexes.

Thiol–ene “click” reactions and recent applications in polymer and materials synthesis: a first update

This contribution serves as an update to a previous review (Polym. Chem.2010,1, 17–36) and highlights recent applications of thiol–ene ‘click’ chemistry as an efficient tool for both polymer/materials synthesis as well as modification.

Renewable polyesters derived from 10-undecenoic acid and vanillic acid with versatile properties

A series of renewable polyesters were synthesized derived from 10-undecenoic acid and vanillic acid. An outstanding feature is that the incorporation of vanillic acid segments into the polyester backbone results in improved mechanical properties.