B(C6F5)3-Catalyzed Reduction of Ketones and Imines Using Silicon-Stereogenic Silanes: Stereoinduction by Single-Point Binding

Asymmetric catalysis with FLPs

Chiral catalysts play a crucial role in the realm of asymmetric catalysis. Since their breakthrough discovery in 2006, chiral frustrated Lewis pairs (FLPs) have risen as a novel catalyst category for a broad range of metal-free asymmetric reactions. This review provides an overview of the remarkable progress made in this field over the past 15 years. The design and synthesis of chiral FLPs and their applications in hydrogenation, hydrosilylation, transfer hydrogenation, and various other reactions are summarized and highlighted.

Concerted Hydrosilylation Catalysis by Silica-Immobilized Cyclic Carbonates and Surface Silanols

Developing a method for creating a novel catalysis of organic molecules is essential because of the growing interest in organocatalysis. In this study, we found that cyclic carbonates immobilized on a nonporous or mesoporous silica support showed catalytic activity for hydrosilylation, which was not observed for the free cyclic carbonates, silica supports, or their physical mixture. Analysis of the effects of linker lengths and pore sizes on the catalytic activity and carbonate C=O stretching frequency revealed that the proximity of carbonates and surface silanols was crucial for synergistic hydrosilylation catalysis. A carbonate and silanol concertedly activated the silane and aldehyde for efficient hydride transfer. Density functional theory calculations on a model reaction system demonstrated that both the carbonate and silanol contributed to the stabilization of the transition state of hydride transfer, which resulted in a reasonable barrier height of 16.8 kcal mol-1. Furthermore, SiO2/carbonate(C4) enabled the hydrosilylation of an aldehyde with an amino group without catalyst poisoning, owing to the weak acidity of surface silanols, in sharp contrast to previously developed acid catalysts. This study demonstrates that immobilization on a solid support can convert inactive organic molecules into active and heterogeneous organocatalysts.

Mechanism Insights into the Iridium(III)- and B(C6F5)3-Catalyzed Reduction of CO2 to the Formaldehyde Level with Tertiary Silanes

The catalytic system [Ir(CF3CO2)(κ2-NSiMe)2] [1; NSiMe = (4-methylpyridin-2-yloxy)dimethylsilyl]/B(C6F5)3 promotes the selective reduction of CO2 with tertiary silanes to the corresponding bis(silyl)acetal. Stoichiometric and catalytic studies evidenced that species [Ir(CF3COO-B(C6F5)3)(κ2-NSiMe)2] (3), [Ir(κ2-NSiMe)2][HB(C6F5)3] (4), and [Ir(HCOO-B(C6F5)3)(κ2-NSiMe)2] (5) are intermediates of the catalytic process. The structure of 3 has been determined by X-ray diffraction methods. Theoretical calculations show that the rate-limiting step for the 1/B(C6F5)3-catalyzed hydrosilylation of CO2 to bis(silyl)acetal is a boron-promoted Si-H bond cleavage via an iridium silylacetal borane adduct.

Molybdenum(VI) Bis(imido) Complexes: From Frustrated Lewis Pairs to Weakly Coordinating Cations

Molybdenum(VI) bis(imido) complexes [Mo(NtBu)2 (LR )2 ] (R=H 1 a; R=CF3 1 b) combined with B(C6 F5 )3 (1 a/B(C6 F5 )3 , 1 b/B(C6 F5 )3 ) exhibit a frustrated Lewis pair (FLP) character that can heterolytically split H-H, Si-H and O-H bonds. Cleavage of H2 and Et3 SiH affords ion pairs [Mo(NtBu)(NHtBu)(LR )2 ][HB(C6 F5 )3 ] (R=H 2 a; R=CF3 2 b) composed of a Mo(VI) amido imido cation and a hydridoborate anion, while reaction with H2 O leads to [Mo(NtBu)(NHtBu)(LR )2 ][(HO)B(C6 F5 )3 ] (R=H 3 a; R=CF3 3 b). Ion pairs 2 a and 2 b are catalysts for the hydrosilylation of aldehydes with triethylsilane, with 2 b being more active than 2 a. Mechanistic elucidation revealed insertion of the aldehyde into the B-H bond of [HB(C6 F5 )3 ]- . We were able to isolate and fully characterize, including by single-crystal X-ray diffraction analysis, the inserted products Mo(NtBu)(NHtBu)(LR )2 ][{PhCH2 O}B(C6 F5 )3 ] (R=H 4 a; R=CF3 4 b). Catalysis occurs at [HB(C6 F5 )3 ]- while [Mo(NtBu)(NHtBu)(LR )2 ]+ (R=H or CF3 ) act as the cationic counterions. However, the striking difference in reactivity gives ample evidence that molybdenum cations behave as weakly coordinating cations (WCC).

N-Silylamines in catalysis: synthesis and reactivity

A summary of the catalytic synthesis and reactivity of N-silylated amines is presented. Dehydrocoupling of amines with silanes, hydrosilylation of imines and dealkenylative coupling of amines with vinylsilanes are three ways to achieve their catalytic syntheses. The resultant N-silylamines serve as substrates in a variety of reactions, including C-N and C-C bond forming reactions, and are preferred in transformations because of the facile Si-N hydrolytic cleavage to reveal free amine products upon reaction completion. This review highlights the distinct electronic properties of N-silyl amines, N-silyl imines and N-silyl enamines that result in complementary reactivity to that of parent non-silyl variants.

Ga+-catalyzed hydrosilylation? About the surprising system Ga+/HSiR3/olefin, proof of oxidation with subvalent Ga+ and silylium catalysis with perfluoroalkoxyaluminate anions

Already 1 mol% of subvalent [Ga(PhF)2]+[pf]- ([pf]- = [Al(ORF)4]-, RF = C(CF3)3) initiates the hydrosilylation of olefinic double bonds under mild conditions. Reactions with HSiMe3 and HSiEt3 as substrates efficiently yield anti-Markovnikov and anti-addition products, while bulkier substrates such as HSiiPr3 are less reactive. Investigating the underlying mechanism by gas chromatography and STEM analysis, we unexpectedly found that H2 and metallic Ga0 formed. Without the addition of olefins, the formation of R3Si-F-Al(ORF)3 (R = alkyl), a typical degradation product of the [pf]- anion in the presence of a small silylium ion, was observed. Electrochemical analysis revealed a surprisingly high oxidation potential of univalent [Ga(PhF)2]+[pf]- in weakly coordinating, but polar ortho-difluorobenzene of E 1/2(Ga+/Ga0; oDFB) = +0.26-0.37 V vs. Fc+/Fc (depending on the scan rate). Apparently, subvalent Ga+, mainly known as a reductant, initially oxidizes the silane and generates a highly electrophilic, silane-supported, silylium ion representing the actual catalyst. Consequently, the [Ga(PhF)2]+[pf]-/HSiEt3 system also hydrodefluorinates C(sp3)-F bonds in 1-fluoroadamantane, 1-fluorobutane and PhCF3 at room temperature. In addition, both catalytic reactions may be initiated using only 0.2 mol% of [Ph3C]+[pf]- as a silylium ion-generating initiator. These results indicate that silylium ion catalysis is possible with the straightforward accessible weakly coordinating [pf]- anion. Apparently, the kinetics of hydrosilylation and hydrodefluorination are faster than that of anion degradation under ambient conditions. These findings open up new windows for main group catalysis.

Competition for Hydride between Silicon and Boron: Synthesis and Characterization of a Hydroborane-Stabilized Silylium Ion

Potent main‐group Lewis acids are capable of activating element‐hydrogen bonds. To probe the rivalry for hydride between silylium‐ and borenium‐ion centers, a neutral precursor with the hydrosilane and hydroborane units in close proximity on a naphthalene‐1,8‐diyl platform was designed. Abstraction of one hydride leads to a hydroborane‐stabilized silylium ion rather than a hydrosilane‐coordinated borenium ion paired with [B(C₆F₅)₄]⁻ or [HCB₁₁Cl₁₁]⁻ as counteranions. Characterization by multinuclear NMR spectroscopy and X‐ray diffraction supported by DFT calculations reveals a cationic, unsymmetrical open three‐center, two‐electron (3c2e) Si−H−B linkage.

Partnering a Three-Coordinate Gallium Cation with a Hydroborate Counter-Ion for the Catalytic Hydrosilylation of CO2

A novel β-diketiminate stabilized gallium hydride, (^Dipp L)Ga(Ad)H (where (^Dipp L)={HC(MeCDippN)₂ }, Dipp=2,6-diisopropylphenyl and Ad=1-adamantyl), has been synthesized and shown to undergo insertion of carbon dioxide into the Ga-H bond under mild conditions. In this case, treatment of the resulting κ¹ -formate complex with triethylsilane does not lead to regeneration of the hydride precursor. However, when combined with B(C₆ F₅ )₃ , (^Dipp L)Ga(Ad)H catalyses the reductive hydrosilylation of CO₂ . Under stoichiometric conditions, the addition of one equivalent of B(C₆ F₅ )₃ to (^Dipp L)Ga(Ad)H leads to the formation of a 3-coordinate cationic gallane complex, partnered with a hydroborate anion, [(^Dipp L)Ga(Ad)][HB(C₆ F₅ )₃ ]. This complex rapidly hydrometallates carbon dioxide and catalyses the selective reduction of CO₂ to the formaldehyde oxidation level at 60 °C in the presence of Et₃ SiH (yielding H₂ C(OSiEt₃ )₂ ). When catalysis is undertaken in the presence of excess B(C₆ F₅ )₃ , appreciable enhancement of activity is observed, with a corresponding reduction in selectivity: the product distribution includes H₂ C(OSiEt₃ )₂ , CH₄ and O(SiEt₃ )₂ . While this system represents proof-of-concept in CO₂ hydrosilylation by a gallium hydride system, the TOF values obtained are relatively modest (max. 10 h^-1 ). This is attributed to the strength of binding of the formatoborate anion to the gallium centre in the catalytic intermediate (^Dipp L)Ga(Ad){OC(H)OB(C₆ F₅ )₃ }, and the correspondingly slow rate of the turnover-limiting hydrosilylation step. In turn, this strength of binding can be related to the relatively high Lewis acidity measured for the [(^Dipp L)Ga(Ad)]⁺ cation (AN=69.8).

Mild reductive rearrangement of oximes and oxime ethers to secondary amines with hydrosilanes catalyzed by B(C6F5)3

Oximes, its ether derivatives and the corresponding hydroxylamines rearrange to secondary amines when reacted with PhSiH₃ and B(C₆F₅)₃ as catalyst. Computations suggest a reduction–rearrangement to be slightly favored over a Beckmann-type sequence.

Defunctionalisation catalysed by boron Lewis acids

Selective defunctionalisation of organic molecules to valuable intermediates is a fundamentally important transformation in organic synthesis. Despite the advances made in efficient and selective defunctionalisation using transition-metal catalysis, the cost, toxicity, and non-renewable properties limit its application in industrial manufacturing processes. In this regard, boron Lewis acid catalysis has emerged as a powerful tool for the cleavage of carbon-heteroatom bonds. The ground-breaking finding is that the strong boron Lewis acid B(C6F5)3 can activate Si-H bonds through η1 coordination, and this Lewis adduct is a key intermediate that enables various reduction processes. This system can be tuned by variation of the electronic and structural properties of the borane catalyst, and together with different hydride sources high chemoselectivity can be achieved. This Perspective provides a comprehensive summary of various defunctionalisation reactions such as deoxygenation, decarbonylation, desulfurisation, deamination, and dehalogenation, all of which catalysed by boron Lewis acids.

Catalytic Synthesis of Oligosiloxanes Mediated by an Air Stable Catalyst, (C6F5)3B(OH2)

The utility of (C₆F₅)₃B(OH₂) as catalyst for the simple and environmentally benign synthesis of oligosiloxanes directly from hydrosilanes, is reported. This protocol offers several advantages compared to other methods of synthesizing siloxanes, such as mild reaction conditions, low catalyst loading, and a short reaction time with high yields and purity. The considerable H₂O-tolerance of (C₆F₅)₃B(OH₂) promoted a catalytic route to disiloxanes which showed >99% conversion of three tertiary silanes, Et₃SiH, PhMe₂SiH, and Ph₃SiH. Preliminary data on the synthesis of unsymmetrical disiloxanes (Si-O-Si') suggests that by modifying the reaction conditions and/or using a 1:1 combination of silane to silanol the cross-product can be favored. Intramolecular reactions of disilyl compounds with catalytic (C₆F₅)₃B(OH₂) led to the formation of novel bridged siloxanes, containing a Si-O-Si linkage within a cyclic structure, as the major product. Moreover, the reaction conditions enabled recovery and recycling of the catalyst. The catalyst was re-used 5 times and demonstrated excellent conversion for each substrate at 1.0 mol% catalyst loading. This seemingly simple reaction has a rather complicated mechanism. With the hydrosilane (R₃SiH) as the sole starting material, the fate of the reaction largely depends on the creation of silanol (R₃SiOH) from R₃SiH as these two undergo dehydrocoupling to yield a disiloxane product. Generation of the silanol is based on a modified Piers-Rubinsztajn reaction. Once the silanol has been produced, the mechanism involves a series of competitive reactions with multiple catalytically relevant species involving water, silane, and silanol interacting with the Lewis acid and the favored reaction cycle depends on the concentration of various species in solution.

Hydrosilylation of Carbonyls Catalyzed by Hydridoborenium Borate Salts: Lewis Acid Activation and Anion Mediated Pathways

The electronically unsaturated three-coordinated hydridoborenium cations [LBH]⁺[HB(C₆F₅)₃]^- (1) and [LBH]⁺[B(C₆F₅)₄]^- (2), supported by a bis(phosphinimino)amide ligand, were found to be excellent catalysts for hydrosilylation of a range of aliphatic and aromatic aldehydes and ketones under mild reaction conditions (L = [{(2,4,6-Me₃C₆H₂N)P(Ph₂)}₂N]). The key steps of the catalytic cycle for hydrosilylation of PhCHO were monitored via in situ multinuclear NMR measurements for catalysts 1 and 2. The combined effect of carbonyl activation via the Lewis acidic hydridoborenium cation and the hydridic nature of the borate counteranion in 1 makes it a more efficient catalyst in comparison to that of carbonyl activation via the predominant Lewis acid activation pathway operating with catalyst 2. The catalytic cycle of 1 showed hydride transfer from the borate moiety [HB(C₆F₅)₃]^- to PhCHO in the first step, forming [PhCH₂-O-B(C₆F₅)₃]^-, which subsequently underwent σ-bond metathesis with Et₃SiH to form the product, PhCH₂-O-SiEt₃. Quantum chemical calculations also support the borate anion mediated mechanism with 1. In contrast, the reaction catalyzed by 2 proceeds predominantly via the Lewis acid activation of the carbonyl group involving [LB(H)←OC(H)Ph]⁺[B(C₆F₅)₄]^- as the transition state and [LBOCH₂Ph]⁺[B(C₆F₅)₄]^- as the intermediate.

Intramolecular Activation of C-O Bond by an o-Boryl Group in o-(Alkoxysilyl)(diarylboryl)benzenes

Halogen-lithium exchange reaction of o-(silyl)bromobenzene 5 with tert-BuLi afforded o-(silyl)lithiobenzene 6, which was reacted with (alkoxy)diarylboranes 7 to form borate intermediates 8. Treatment of 8 with chlorotrimethylsilane formed o-(alkoxysilyl)(diarylboryl)benzenes 4. The C-O bond in 4 was activated by intramolecular interaction between the oxygen atom and the boron atom. 4a readily reacted with MeOH and EtOH to afford the corresponding alkoxysilanes 10 and 11, respectively. Treatment of 10 with 1,4-diazabicyclo[2.2.2]octane (DABCO) afforded the silyloxyborate complex 13.

Organoaluminum cations for carbonyl activation

In search of stable, yet reactive aluminum Lewis acids, we have isolated an organoaluminum cation, [(Me2NC6H4)2Al(C4H8O)2]+, coordinated with two labile tetrahydrofuran ligands. Its catalytic performance in aldehyde dimerization reveals turn-over frequencies reaching up to 6000 h-1, exceeding that of the reported main group catalysts. The cation is further demonstrated to catalyze hydroelementation of ketones. Mechanistic investigations reveal that aldehyde dimerization and ketone hydrosilylation occur through carbonyl activation.

Steric Demand and Rate-determining Step for Photoenolization of Di-ortho-substituted Acetophenone Derivatives

Laser flash photolysis of ketone 1 in argon-saturated methanol yields triplet biradical 1BR (τ = 63 ns) that intersystem crosses to form photoenols Z-1P (λ_max = 350 nm, τ ~ 10 μs) and E-1P (λ_max = 350 nm, τ > 6 ms). The activation barrier for Z-1P re-forming ketone 1 through a 1,5-H shift was determined as 7.7 ± 0.3 kcal mol^-1 . In contrast, for ketone 2, which has a less sterically hindered carbonyl moiety, laser flash photolysis in argon-saturated methanol revealed the formation of biradical 2BR (λ_max = 330 nm, τ ~ 303 ns) that intersystem crosses to form photoenol E-2P (λ_max = 350 nm, τ > 42 μs), but photoenol Z-2P was not detected. However, in more viscous basic H-bond acceptor (BHA) solvent, such as hexamethylphosphoramide, triplet 2BR intersystem crosses to form both Z-2P (λ_max = 370 nm, τ ~ 1.5 μs) and E-2P. Thus, laser flash photolysis of ketone 2 in methanol reveals that intersystem crossing from 2BR to form Z-2P is slower than the 1,5-H shift of Z-2P, whereas in viscous BHA solvents, the 1,5-H shift becomes slower than the intersystem crossing from 2BR to Z-2P. Density functional theory and coupled cluster calculations were performed to support the reaction mechanisms for photoenolization of ketones 1 and 2.

New Control Over Silicone Synthesis using SiH Chemistry: The Piers-Rubinsztajn Reaction

There is a strong imperative to synthesize polymers with highly controlled structures and narrow property ranges. Silicone polymers do not lend themselves to this paradigm because acids or bases lead to siloxane equilibration and loss of structure. By contrast, elegant levels of control are possible when using the Piers-Rubinsztajn reaction and analogues, in which the hydrophobic, strong Lewis acid B(C₆ F₅ )₃ activates SiH groups, permitting the synthesis of precise siloxanes under mild conditions in high yield; siloxane decomposition processes are slow under these conditions. A broad range of oxygen nucleophiles including alkoxysilanes, silanols, phenols, and aryl alkyl ethers participate in the reaction to create elastomers, foams and green composites, for example, derived from lignin. In addition, the process permits the synthesis of monofunctional dendrons that can be assembled into larger entities including highly branched silicones and dendrimers either using the Piers-Rubinsztajn process alone, or in combination with hydrosilylation or other orthogonal reactions.

Density Functional Theory Mechanistic Study of Boron-Catalyzed N-Alkylation of Amines with Formic Acid: Formic Acid Activation by Silylation Reaction

New methodology for the alkylation of amines is an intriguing issue in both academia and industry. Recently, several groups reported the metal-free B(C₆ F₅ )₃ -catalyzed N-alkylation of amines, but the mechanistic details of these important reactions are unclear. Herein, a computational study was performed to elucidate the mechanism of the N-alkylation of amines with formic acid catalyzed by the Lewis acid B(C₆ F₅ )₃ in the presence of hydrosilane. We found that the reaction started with the activation of formic acid through a novel model. Then, the high electrophilicity of the C center of the formic acid unit and the nucleophilic character of the amine resulted in a C-N coupling reaction. Finally, two sequential silyl-group and H^- transfer steps occurred to generate the final product. Upon comparing the reaction barrier and the hydrogenation of indole, our mechanism is more favorable than that proposed by the group of Yu and Fu.

Computed thermodynamic stabilities of silylium Lewis base adducts

We report a computational study of the transfer of silylium from phosphine to heteroatom containing Lewis bases including ethers, phosphines, and amines.

An intramolecular ortho-assisted activation of the silicon–hydrogen bond in arylsilanes: an experimental and theoretical study

An intramolecular activation of the Si–H bond in arylsilanes by selected ortho-assisting functional groups based on boron, carbon and phosphorus was investigated experimentally and by means of theoretical calculations.

Non-Metal-Catalyzed Heterodehydrocoupling of Phosphines and Hydrosilanes: Mechanistic Studies of B(C6F5)3-Mediated Formation of P-Si Bonds

Non-metal-catalyzed heterodehydrocoupling of primary and secondary phosphines (R¹R²PH, R² = H or R¹) with hydrosilanes (R³R⁴R⁵SiH, R⁴, R⁵ = H or R³) to produce synthetically useful silylphosphines (R¹R²P-SiR³R⁴R⁵) has been achieved using B(C₆F₅)₃ as the catalyst (10 mol %, 100 °C). Kinetic studies demonstrated that the reaction is first-order in hydrosilane and B(C₆F₅)₃ but zero-order in phosphine. Control experiments, DFT calculations, and DOSY NMR studies suggest that a R¹R²HP·B(C₆F₅)₃ adduct is initially formed and undergoes partial dissociation to form an "encounter complex". The latter mediates frustrated Lewis pair type Si-H bond activation of the silane substrates. We also found that B(C₆F₅)₃ catalyzes the homodehydrocoupling of primary phosphines to form cyclic phosphine rings and the first example of a non-metal-catalyzed hydrosilylation of P-P bonds to produce silylphosphines (R¹R²P-SiR³R⁴R⁵). Moreover, the introduction of PhCN to the reactions involving secondary phosphines with hydrosilanes allowed the heterodehydrocoupling reaction to proceed efficiently under much milder conditions (1.0 mol % B(C₆F₅)₃ at 25 °C). Mechanistic studies, as well as DFT calculations, revealed that PhCN plays a key mechanistic role in facilitating the dehydrocoupling reactions rather than simply functioning as H₂-acceptor.

The Asymmetric Piers Hydrosilylation

An axially chiral, cyclic borane decorated with just one C6F5 group at the boron atom promotes the highly enantioselective hydrosilylation of acetophenone derivatives without assistance of an additional Lewis base (up to 99% ee). The reaction is an unprecedented asymmetric variant of Piers' B(C6F5)3-catalyzed carbonyl hydrosilylation. The steric congestion imparted by the 3,3'-disubstituted binaphthyl backbone of the borane catalyst as well as the use of reactive trihydrosilanes as reducing agents are keys to success.

Eco-friendly hydrogenation of aromatic aldehyde compounds by tandem dehydrogenation of dimethylamine-borane in the presence of a reduced graphene oxide furnished platinum nanocatalyst

An easy and effective synthetic method has been developed for the reduction of aldehyde compounds in the presence of monodisperse Pt(0)/TPA@rGO NPs as the catalyst.

A unified survey of Si-H and H-H bond activation catalysed by electron-deficient boranes

The bond activation chemistry of B(C6F5)3 and related electron-deficient boranes is currently experiencing a renaissance due to the fascinating development of frustrated Lewis pairs (FLPs). B(C6F5)3's ability to catalytically activate Si-H bonds through η(1) coordination opened the door to several unique reduction processes. The ground-breaking finding that the same family of fully or partially fluorinated boron Lewis acids allows for the related H-H bond activation, either alone or as a component of an FLP, brought considerable momentum into the area of transition-metal-free hydrogenation and, likewise, hydrosilylation. This review comprehensively summarises synthetic methods involving borane-catalysed Si-H and H-H bond activation. Systems corresponding to an FLP-type situation are not covered. Aside from the broad manifold of C=X bond reductions and C=X/C-X defunctionalisations, dehydrogenative (oxidative) Si-H couplings are also included.

Modular Approach to Reductive C(sp2)-H and C(sp3)-H Silylation of Carboxylic Acid Derivatives through Single-Pot, Sequential Transition Metal Catalysis

We report a modular approach to catalytic reductive Csp2-H and Csp3-H silylation of carboxylic acid derivatives encompassing esters, ketones, and aldehydes. Choice of either an Ir(I)/Rh(I) or Rh(I)/Rh(I) sequence leads to either exhaustive reductive ester or reductive ketone/aldehyde silylation, respectively. Notably, a catalyst-controlled direct formation of doubly reduced silyl ethers is presented, specifically via Ir-catalyzed exhaustive hydrosilylation. The resulting silyl ethers undergo Csp2-H and benzylic Csp3-H silylation in a single vessel.