Platinum-Based Heterogeneously Catalyzed Hydrosilylation

Predicting 195 Pt NMR Chemical Shifts in Water-Soluble Inorganic/Organometallic Complexes with a Fast and Simple Protocol Combining Semiempirical Modeling and Machine Learning

Water-soluble Pt complexes are the key components in medicinal chemistry and catalysis. The well-known cisplatin family of anticancer drugs and industrial hydrosylilation catalysts are two leading examples. On the molecular level, the activity mechanisms of such complexes mostly involve changes in the Pt coordination sphere. Using ¹⁹⁵ Pt NMR spectroscopy for operando monitoring would be a valuable tool for uncovering the activity mechanisms; however, reliable approaches for the rapid correlation of Pt complex structure with ¹⁹⁵ Pt chemical shifts are very challenging and not available for everyday research practice. While NMR shielding is a response property, molecular 3D structure determines NMR spectra, as widely known, which allows us to build up 3D structure to ¹⁹⁵ Pt chemical shift correlations. Accordingly, we present a new workflow for the determination of lowest-energy configurational/conformational isomers based on the GFN2-xTB semiempirical method and prediction of corresponding chemical shifts with a Machine Learning (ML) model tuned for Pt complexes. The workflow was designed for the prediction of ¹⁹⁵ Pt chemical shifts of water-soluble Pt(II) and Pt(IV) anionic, neutral, and cationic complexes with halide, NO₂ ^- , (di)amino, and (di)carboxylate ligands with chemical shift values ranging from -6293 to 7090 ppm. The model offered an accuracy (normalized root-mean-square deviation/RMSD) of 1.08 %/145.02 ppm on the held-out test set.

Tying Covalent Organic Frameworks through Alkene Metathesis and Supported Platinum as Efficient Catalysts for Hydrosilylation

Recently there has been a great interest in covalent organic frameworks due to their fascinating properties. Current approaches to improve their hydrolytic stability mainly rely on the transformation of the dynamic bonds into strong and irreversible bonds, but these approaches also reduce the versatility of the frameworks. Herein, we would like to demonstrate a solution to this dilemma by forming hierarchical bonds through olefin metathesis to produce highly stable COFs. Our approach allows unprecedented opportunities for post-modification of the inner space through the dynamic imine bonds while maintaining the integrity of the framework. Specifically, we demonstrate an amorphous-to-crystalline transformation. In addition, the porosity can be enhanced by up to 70% after full removal of the amine subunits. Overall, our work provides a new direction for the generation of highly stable while still versatile COFs. Meanwhile, platinum(II) complexes can be supported on BHU-2 (Pt@BHU-2) or BHU-2-Oxidate(Pt@BHU-2-Oxidate) as efficient catalysts for hydrosilylation.

Evidence for the “cocktail” nature of platinum-catalyzed alkyne and alkene hydrosilylation reactions

Evidence of the involvement of a “cocktail”-type catalytic system in the alkyne and alkene hydrosilylation reaction in the presence of platinum on a carbon support is reported.

Radiation curable polysiloxane: synthesis to applications

Among the different types of specialty polymers, polysiloxane finds its position in the pyramid's apex in terms of its performance attributes. Its unique structural features result in it having superior performance benefits over wide operational conditions. Hence, polysiloxanes are used in various industries. Like other polymers, to effectively use polysiloxanes, curing is a non-negotiable fact. Therefore, polysiloxanes are cured using different chemistries such as addition, condensation, and peroxy-mediated methods, etc. However, recently, it has been noted that there is a strong impetus towards developing radiation-curable polysiloxanes. A faster turnover time, higher yield, and marginal involvement in the release of any toxic by-products has resulted in the widespread acceptance of radiation curing techniques. This review article provides insight into the various facets of polysiloxane chemistry, the synthesis of radiation curable polysiloxane, and the curing methodology of polysiloxane using radiation sources such as ultraviolet, electron beam, and gamma radiation. We further provide an account of the various applications of such radiation-curable polysiloxanes.

Cyclic metal(oid) clusters control platinum-catalysed hydrosilylation reactions: from soluble to zeolite and MOF catalysts

The Pt-catalysed addition of silanes to functional groups such as alkenes, alkynes, carbonyls and alcohols, i.e. the hydrosilylation reaction, is a fundamental transformation in industrial and academic chemistry, often claimed as the most important application of Pt catalysts in solution. However, the exact nature of the Pt active species and its mechanism of action is not well understood yet, particularly regarding regioselectivity. Here, experimental and computational studies together with an ad hoc graphical method show that the hydroaddition of alkynes proceeds through Pt-Si-H clusters of 3-5 atoms (metal(oid) association) in parts per million amounts (ppm), which decrease the energy of the transition state and direct the regioselectivity of the reaction. Based on these findings, new extremely-active (ppm) microporous solid catalysts for the hydrosilylation of alkynes, alkenes and alcohols have been developed, paving the way for more environmentally-benign industrial applications.

Platinum on 2-aminoethanethiol functionalized MIL-101 as a catalyst for alkene hydrosilylation

Hydrosilylation is one of the largest-scale applications for homogeneous catalysis and is widely used to enable the commercial manufacture of silicon products. In this paper, a bifunctional heterogeneous catalyst, Pt^δ+/AET-MIL-101 (AET = 2-aminoethanethiol) with a partially positively charged Pt^δ+ electronic structure is reported, which was successfully prepared using post-synthesis modification with AET and a platinum precursor. The catalysts were characterized using X-ray diffraction (XRD), nitrogen (N₂) adsorption–desorption, transmission electron microscopy (TEM), scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) techniques which showed that the synergy of AET-MIL-101 provides a good dispersion of Pt^δ+ in the channels, which can efficiently catalyze the hydrosilylation reaction with almost complete conversion and produce a unique adduct. In addition, the synthetic heterogeneous catalyst Pt^δ+/AET-MIL-101 achieves reasonable use of Pt in terms of number cycles and atomic utilization efficiency, indicating the potential to achieve a green hydrosilylation industry.

Pt^δ+ was uniformly dispersed in AET-MIL-101 as a highly efficient catalyst for a catalytic hydrosilylation reaction.

Heterogeneous hydrosilylation reaction catalysed by platinum complexes immobilized on bipyridine-periodic mesoporous organosilicas

A platinum complex immobilized on a bipyridine-periodic mesoporous organosilica (BPy-PMO) effectively catalysed the hydrosilylation reaction and showed good reusability without the loss of the product yield.

Spatially-Resolved Multiple Metallopolymer Surfaces by Photolithography

A tetrazole-based photoligation protocol for the spatially-resolved encoding of various defined metallopolymers onto solid surfaces is introduced. By using this approach, fabrication of bi- and trifunctional metallopolymer surfaces with different metal combinations were achieved. Specifically, α-ω-functional copolymers containing bipyridine as well as triphenylphosphine ligands were synthesized through reversible addition-fragmentation chain transfer (RAFT) polymerization, and subsequently metal loaded to afford metallopolymers of the widely-used metals gold, palladium, and platinum. Spatially-resolved surface attachment was achieved by means of a nitrile imine-mediated tetrazole-ene cycloaddition (NITEC) based photoligation protocol, exploiting tethered tetrazoles and metallopolymers equipped with a maleimide chain terminus. Metallopolymer coated surfaces with three different metals were prepared and characterized by time-of-flight secondary ion mass spectrometry (ToF-SIMS) and spatially-resolved X-ray photoelectron spectroscopy (XPS) mapping, supporting the preserved chemical composition of the surface-bound metallopolymers. The established photochemical technology platform for arbitrary spatially-resolved metallopolymer surface designs enables the patterning of multiple metallopolymers onto solid substrates. This allows for the assembly of designer metallopolymer substrates.

Graphene-enhanced platinum-catalysed hydrosilylation of amides and chalcones: a sustainable strategy allocated with in situ heterogenization and multitask application of H2PtCl6

This work developed a new sustainable strategy with comprehensive utilization of recovered catalyst, which the organosilicon/graphene-supported platinum catalyst prepared from reduction of amides could be further used in the 1,4-hydrosilylation of chalcones.

bis-Nitrile and bis-Dialkylcyanamide Platinum(II) Complexes as Efficient Catalysts for Hydrosilylation Cross-Linking of Siloxane Polymers

cis- and trans-Isomers of the platinum(II) nitrile complexes [PtCl2(NCR)2] (R = NMe2, N(C₅H10), Ph, CH2Ph) were examined as catalysts for hydrosilylation cross-linking of vinyl-terminated polydimethylsiloxane and trimethylsilyl-terminated poly(dimethylsiloxane-co-ethylhydrosiloxane) producing high quality silicone rubbers. Among the tested platinum species the cis-complexes are much more active catalysts than their trans-congeners and for all studied platinum complexes cis-[PtCl2(NCCH2Ph)2] exhibits the best catalytic activity (room temperature, c = 1.0 × 10(-4) mol/L, τpot-life 60 min, τcuring 6 h). Although cis-[PtCl₂(NCCH2Ph)2] is less active than the widely used Karstedt's catalyst, its application for the cross-linking can be performed not only at room temperature (c = 1.0 × 10(-4) mol/L), but also, more efficiently, at 80 °C (c = 1.0 × 10(-4)-1.0 × 10(-5) mol/L) and it prevents adherence of the formed silicone rubbers to equipment. The usage of the cis- and trans-[PtCl2(NCR)2] complexes as the hydrosilylation catalysts do not require any inhibitors and, moreover, the complexes and their mixtures with vinyl- and trimethylsilyl terminated polysiloxanes are shelf-stable in air. Tested catalysts do not form colloid platinum particles after the cross-linking.