Design and Optimization of the Single-Stage Continuous Mixed Suspension-Mixed Product Removal Crystallization of 2-Chloro-N-(4-methylphenyl)propenamide

A continuously operated single-stage mixed suspension-mixed product removal (MSMPR) crystallizer was developed for the continuous cooling crystallization of 2-chloro-N-(4-methylphenyl)propanamide (CNMP) in toluene from 25 to 0 °C. The conversion of the previous batch to a continuous process was key to developing a methodology linking the synthesis and purification unit operations of CNMP and gave further insight in the development of continuous process trains for active pharmaceutical ingredient materials. By monitoring how parameters such as cooling and agitation rates influence particle size and the yield, two batch start-up strategies were compared. The second part of the study focused on developing and optimizing the continuous cooling crystallization of CNMP in the MSMPR crystallizer in relation to the yield by determining the effects of varying the residence time and the agitation rates. During the MSMPR operation, the plot of the focused beam reflectance measurement total counts versus time oscillates and reaches an unusual state of control. Despite the oscillations, the dissolved concentration was constant. The yield and production rate from the system were constant after two residence times, as supported by FTIR data. The overall productivity was higher at shorter residence times (τ), and a productivity of 69.51 g/h for τ = 20 min was achieved for the isolation of CNMP.

Generation of Tosyl Azide in Continuous Flow Using an Azide Resin, and Telescoping with Diazo Transfer and Rhodium Acetate-Catalyzed O-H Insertion

Generation of tosyl azide 12 in acetonitrile in flow under water-free conditions using an azide resin and its use in diazo transfer to a series of aryl acetates are described. Successful telescoping with a rhodium acetate-catalyzed O-H insertion has been achieved, thereby transforming the aryl acetate 8 to α-hydroxy ester 10, a key intermediate in the synthesis of clopidogrel 11, without requiring isolation or handling of either tosyl azide 12 or α-aryl-α-diazoacetate 9, or indeed having significant amounts of either present at any point. Significantly, the solution of α-diazo ester 9 was sufficiently clean to progress directly to the rhodium acetate-catalyzed step without any detrimental impact on the efficiency of the O-H insertion. In addition, the rhodium acetate-catalyzed O-H insertion process is cleaner in flow than under traditional batch conditions. Use of the azide resin offers clear safety advantages and, in addition, this approach complements earlier protocols for the generation of tosyl azide 12 in flow; this protocol is especially useful with less acidic substrates.

Exploiting Continuous Processing for Challenging Diazo Transfer and Telescoped Copper-Catalyzed Asymmetric Transformations

Generation and use of triflyl azide in flow enables efficient synthesis of a range of α-diazocarbonyl compounds, including α-diazoketones, α-diazoamides, and an α-diazosulfonyl ester, via both Regitz-type diazo transfer and deacylative/debenzoylative diazo-transfer processes with excellent yields and offers versatility in the solvent employed, in addition to addressing the hazards associated with handling of this highly reactive sulfonyl azide. Telescoping the generation of triflyl azide and diazo-transfer process with highly enantioselective copper-mediated intramolecular aromatic addition and C–H insertion processes demonstrates that the reaction stream containing the α-diazocarbonyl compound can be obtained in sufficient purity to pass directly over the immobilized copper bis(oxazoline) catalyst without detrimentally impacting the catalyst enantioselectivity.

Flow Biocatalysis: A Challenging Alternative for the Synthesis of APIs and Natural Compounds

Biocatalysts represent an efficient, highly selective and greener alternative to metal catalysts in both industry and academia. In the last two decades, the interest in biocatalytic transformations has increased due to an urgent need for more sustainable industrial processes that comply with the principles of green chemistry. Thanks to the recent advances in biotechnologies, protein engineering and the Nobel prize awarded concept of direct enzymatic evolution, the synthetic enzymatic toolbox has expanded significantly. In particular, the implementation of biocatalysts in continuous flow systems has attracted much attention, especially from industry. The advantages of flow chemistry enable biosynthesis to overcome well-known limitations of “classic” enzymatic catalysis, such as time-consuming work-ups and enzyme inhibition, as well as difficult scale-up and process intensifications. Moreover, continuous flow biocatalysis provides access to practical, economical and more sustainable synthetic pathways, an important aspect for the future of pharmaceutical companies if they want to compete in the market while complying with European Medicines Agency (EMA), Food and Drug Administration (FDA) and green chemistry requirements. This review focuses on the most recent advances in the use of flow biocatalysis for the synthesis of active pharmaceutical ingredients (APIs), pharmaceuticals and natural products, and the advantages and limitations are discussed.

Thermal Stability and Explosive Hazard Assessment of Diazo Compounds and Diazo Transfer Reagents

Despite their wide use in academia as metal-carbene precursors, diazo compounds are often avoided in industry owing to concerns over their instability, exothermic decomposition, and potential explosive behavior. The stability of sulfonyl azides and other diazo transfer reagents is relatively well understood, but there is little reliable data available for diazo compounds. This work first collates available sensitivity and thermal analysis data for diazo transfer reagents and diazo compounds to act as an accessible reference resource. Thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), and accelerating rate calorimetry (ARC) data for the model donor/acceptor diazo compound ethyl (phenyl)diazoacetate are presented. We also present a rigorous DSC dataset with 43 other diazo compounds, enabling direct comparison to other energetic materials to provide a clear reference work to the academic and industrial chemistry communities. Interestingly, there is a wide range of onset temperatures (T onset) for this series of compounds, which varied between 75 and 160 °C. The thermal stability variation depends on the electronic effect of substituents and the amount of charge delocalization. A statistical model is demonstrated to predict the thermal stability of differently substituted phenyl diazoacetates. A maximum recommended process temperature (T D24) to avoid decomposition is estimated for selected diazo compounds. The average enthalpy of decomposition (ΔH D) for diazo compounds without other energetic functional groups is -102 kJ mol-1. Several diazo transfer reagents are analyzed using the same DSC protocol and found to have higher thermal stability, which is in general agreement with the reported values. For sulfonyl azide reagents, an average ΔH D of -201 kJ mol-1 is observed. High-quality thermal data from ARC experiments shows the initiation of decomposition for ethyl (phenyl)diazoacetate to be 60 °C, compared to that of 100 °C for the common diazo transfer reagent p-acetamidobenzenesulfonyl azide (p-ABSA). The Yoshida correlation is applied to DSC data for each diazo compound to provide an indication of both their impact sensitivity (IS) and explosivity. As a neat substance, none of the diazo compounds tested are predicted to be explosive, but many (particularly donor/acceptor diazo compounds) are predicted to be impact-sensitive. It is therefore recommended that manipulation, agitation, and other processing of neat diazo compounds are conducted with due care to avoid impacts, particularly in large quantities. The full dataset is presented to inform chemists of the nature and magnitude of hazards when using diazo compounds and diazo transfer reagents. Given the demonstrated potential for rapid heat generation and gas evolution, adequate temperature control and cautious addition of reagents that begin a reaction are strongly recommended when conducting reactions with diazo compounds.

Diazo-Transfer Reagent 2-Azido-4,6-dimethoxy-1,3,5-triazine Displays Highly Exothermic Decomposition Comparable to Tosyl Azide

2-Azido-4,6-dimethoxy-1,3,5-triazine (ADT) was reported recently as a new "intrinsically safe" diazo-transfer reagent. This assessment was based on differential scanning calorimetry data indicating that ADT exhibits endothermic decomposition. We present DSC data on ADT that show exothermic decomposition with an initiation temperature ( T_init) of 159 °C and an enthalpy of decomposition (Δ H_D) of -1135 J g^-1 (-207 kJ mol^-1). We conclude that ADT is potentially explosive and must be treated with caution, being of comparable exothermic magnitude to tosyl azide (TsN₃). A maximum recommended process temperature for ADT is 55 °C.

A 'sulfonyl-azide-free' (SAFE) aqueous-phase diazo transfer reaction for parallel and diversity-oriented synthesis

Diazo transfer reactions are notoriously associated with the use of potentially explosive sulfonyl azides. The first 'sulfonyl-azide-free' (SAFE) protocol for producing diazo compounds from their active-methylene precursors via the Regitz diazo transfer reaction was developed and has displayed a remarkable substrate scope. It can be applied to generating arrays of diazo compounds for further evolution via combinatorial chemistry and a range of scaffold-generating transformations.

Structure of 2-chloro-N-(p-tol-yl)propanamide

Two independent samples of the title compound, alternatively 2-chloro-N-(4-methylphenyl)prop-an-amide, C10H12ClNO, 1, were studied using Cu Kα, 1a, and Mo Kα, 1b, radiation as part of a continuous crystallization study. The mol-ecule crystallizes with disorder in the Cl/terminal methyl positions [occupancies for the major disorder component of 0.783 (2) in 1a and and 0.768 (2) in 1b] and exhibits N-C bond lengths of 1.3448 (19), 1.344 (2) Å, C=O bond lengths of 1.2233 (18) and 1.2245 (19) Å and an acetamide moiety C-N-C-C torsion angle of 179.00 (13), 178.97 (14) ° for 1a and 1b, respectively. In the crystal, chains along the a axis are formed via N-H⋯O hydrogen bonds between acetamide groups, as well as C-H⋯O inter-actions. These chains arrange themselves into parallel running stacks which display weak C-Cl⋯O=C halogen bonding as well as weak C-H⋯π inter-actions.