Preconcentration and Determination of Mercury(II) at a Chemically Modified Electrode Containing 3-(2-Thioimidazolyl)propyl Silica Gel

A mercury-sensitive chemically modified graphite paste electrode was constructed by incorporating modified silica gel into a conventional graphite paste electrode. The functional group attached to the (3-chloropropyl) silica gel surface was 2-mercaptoimidazole, giving a new product denoted by 3-(2-thioimidazolyl)propyl silica gel, which is able to complex mercury ions. Mercury was chemically adsorbed on the modified graphite paste electrode containing 3-(2-thioimidazolyl)propyl silica (TIPSG GPE) by immersion in a Hg(II) solution, and the resultant surface was characterized by cyclic and differential pulse anodic stripping voltammetry. One cathodic peak at 0.1 V and other anodic peak at 0.34 V were observed on scanning the potential from -0.1 to 0.8 V (0.01 M KNO3; v = 2.0 mV s(-1) vs. Ag/AgCl). The anodic peak at 0.34 V show an excellent sensitivity for Hg(II) ions in the presence of several foreign ions. A calibration graph covering the concentration range from 0.02 to 2 mg L(-1) was obtained. The detection limit was estimated to be 5 microg L(-1). The precision for six determinations of 0.05 and 0.26 mg L(-1) Hg(II) was 3.0 and 2.5% (relative standard deviation), respectively. The method can be used to determine the concentration of mercury(II) in natural waters contaminated by this metal.

Preparation of a Clay-modified Carbon Paste Electrode Based on 2-Thiazoline-2-thiol-hexadecylammonium Sorption for Sensitive Determination of Mercury

A montmorillonite from Wyoming-USA was used to prepare an organo-clay complex, named 2-thiazoline-2-thiol-hexadecyltrimethylammonium-clay (TZT-HDTA-clay), for the purpose of the selective adsorption of the heavy metals ions and possible use as a chemically modified carbon paste electrode (CMCPE). Adsorption isotherms of Hg2+, Pb2+, Cd2+, Cu2+, and Zn2+ from aqueous solutions as a function of the pH were studied at 298 K. Conditions for quantitative retention and elution were established for each metal by batch and column methods. The organo-clay complex was very selective to Hg(II) in aqueous solution in which other metals and ions were also present. The accumulation voltammetry of Hg(II) was studied at a carbon paste electrode chemically modified with this material. The mercury response was evaluated with respect to the pH, electrode composition, preconcentration time, mercury concentration, "cleaning" solution, possible interferences and other variables. A carbon paste electrode modified by TZT-HDTA-clay showed two peaks: one cathodic peak at about 0.0 V and an anodic peak at 0.25 V, scanning the potential from -0.2 to 0.8 V (0.05 M KNO3 vs. Ag/AgCl). The anodic peak at 0.25 V presents excellent selectivity for Hg(II) ions in the presence of foreign ions. The detection limit was estimated as 0.1 microg L(-1). The precision of determination was satisfactory for the respective concentration level.

Sensitive and reproducible quantification of Cu2+ by stripping with a carbon paste electrode modified with humic acid

The preparation of a humic acid modified carbon paste electrode (HA-MCPE) as well as the behavior of its surface as complexing agent toward Cu2+ cations are described. Electrochemical studies of the reduction of the complexed cations and of the anodic stripping oxidation of the resulting copper are outlined. The anodic stripping current was correlated to the Cu2+ concentrations. A well-defined method for the preparation of reproducible electrodes is described. The effects on the current response obtained by cyclic voltammetry of the humic acid ratio, the pH, the accumulation time, and the speed scan rate were studied. Calibration graphs were linear over the range 3 x 10(-8)-10(-5) mol L(-1) Cu2+ and the relative standard deviation (R.S.D.) was 1.2% (n=5) for [Cu2+] = 1.6 x 10(-5) mol L(-1). 5 min accumulation time for [Cu2+] > 10(-7) mol L(-1) and 10 min for [Cu2+] < 10(-7) mol L(-1) were sufficient to permit sensitive and reproducible measurements. The electrode was successfully used to measure Cu2+ in real samples and the results were compared to those obtained by the standard method with differential pulse anodic stripping voltammetry.

Preconcentration and voltammetry of mercury on a functionalized sol-gel thin film modified glassy carbon electrode

A functionalized sol-gel thin film modified glassy carbon electrode has been prepared for the determination of mercury. The tetrasulfide in the sol-gel matrix has a high affinity for mercury species. The chemically integrated functional groups in the sol-gel precursor ensure a high chemical and mechanical stability of the modified electrodes, and therefore a stable and reproducible analytical performance. By medium exchange anodic stripping voltammetry, this modified electrode allows reliable, low cost and interference-free determination of mercury.