Differential pulse polarographic determination of omeprazole in pharmaceutical preparations

TLC–Densitometry for Determination of Omeprazole in Simple and Combined Pharmaceutical Preparations

TLC combined with densitometry was used and chromatographic conditions developed to separate omeprazole and diclofenac sodium from their potential impurities. The development of the TLC–densitometry method is based on the elaboration of new chromatographic conditions allowing for the simultaneous determination of omeprazole and diclofenac sodium in a pharmaceutical preparation. Identification and quantification of omeprazole in simple and combined (with diclofenac) pharmaceutical preparations was performed on silica gel 60F₂₅₄ using one mobile phase: chloroform–methanol–ammonia (36:4:0.60, v/v). Diclofenac sodium was determined in the presence of omeprazole after 2D separation on silica gel using two mobile phases of the first phase of chloroform–methanol–ammonia (36:4:0.60, v/v) and the second mobile phase cyclohexane–chloroform–methanol–glacial acetic acid (6:3:0.5:0.5 v/v). The developed method is simple, economical, specific, precise, accurate, sensitive, and robust, with a good range of linearity for the quantification of omeprazole and diclofenac sodium. TLC in combination with densitometry can be used as an effective analytical tool for quality control and quantitative determination of omeprazole in simple and combined pharmaceutical preparations containing diclofenac sodium. TLC in combination with densitometry can be recommended for the analysis of omeprazole and diclofenac sodium in the absence of HPLC or spectrophotometer in the laboratory or to confirm results obtained with other analytical techniques.

Analytical methodologies for the determination of omeprazole: An overview

Omeprazole, a gastric acid pump inhibitor, dose-dependently controls gastric acid secretion; the drug has greater antisecretory activity than histamine H(2)-receptor antagonists. Omeprazole has been determined in formulations and biological fluids by a variety of methods such as spectrophotometry, high-performance liquid chromatography with ultraviolet detection and liquid chromatography coupled with tandem mass spectrometry. The overview includes the most relevant analytical methodologies used in its determination since the origin still today.

Determination of omeprazole in rat plasma by high-performance liquid chromatography without solvent extraction

A HPLC method without solvent extraction and using ultraviolet detection at 302 nm for the determination of omeprazole in rat plasma has been validated. Plasma samples after pretreatment with acetonitrile to effect deproteinization were dried under N(2) at 40 degrees C and reconstituted with mobile phase. The standard calibration curve for omeprazole was linear (r(2)=0.9999) over the concentration range of 0.02-3 microgml(-1). The intra- and inter-day assay variability range was 4.8-9.2% and 5.2-10.3% individually. This method has been successfully applied to a pharmacokinetic study of omeprazole in rats.

Square-wave adsorptive cathodic stripping voltammetry of pantoprazole

Adsorption and reduction of pantoprazole were investigated by cyclic and square-wave voltammetry on a hanging mercury drop electrode in Britton-Robinson buffers at pH 2.0-11.0. The reduction process gave rise to a single peak within the entire pH range. Study of the variation of the reduction signal with solution variables such as pH and concentration of pantoprazole and instrumental variables such as accumulation time and potential, frequency, pulse height and pulse amplitude, has resulted in optimization of the reduction signal for analytical purposes. The voltammetric procedure was applied successfully to give a rapid and precise assay of pantoprazole in a tablet dosage form.

First-order UV-derivative spectrophotometry in the analysis of omeprazole and pantoprazole sodium salt and corresponding impurities

The first-order UV-derivative spectrophotometry, applying zero-crossing method was developed for the determination of omeprazole (OM), omeprazole sulphone (OMS), pantoprazole sodium salt (PANa), and N-methylpantoprazole (NPA) in methanol-ammonia 4.0% v/v, where the sufficient spectra resolutions of drug and corresponding impurity were obtained, using the amplitudes 1D(304), 1D(307), 1D(291.5) and 1D(296.5), respectively. Method showed good linearity in the ranges (microg ml(-1)): 1.61-17.2 for OM; 2.15-21.50 for OMS; 2.13-21.30 for PANa and 2.0-20.0 for NPA, accuracy and precision (repeatability and reproducibility). The experimentally determined values of LOD (microg ml(-1)) were 1.126; 0.76; 0.691 and 0.716 for OM, OMS, PANa and NPA, respectively. The obtained values of 2.91% w/w for OMS and 3.58% w/w for NPA in the presence of their parent drug, by applying the method of standard additions, point out the usage of the proposed method in stability studies. Zero-crossing method in the first-order derivative spectrophotometry showed the impurity-drug intermolecular interactions, due to the possible intermolecular hydrogen bonds, confirmed by divergences of experimentally obtained amplitudes for impurities OMS and NPA in comparison to expected values according to regression equations of calibration graphs.

Anodic voltammetric assay of lansoprazole and omeprazole on a carbon paste electrode

The electrochemical oxidations of lansoprazole and omeprazole have been studied at a carbon paste electrode by cyclic and differential-pulse voltammetry in Britton-Robinson buffer solutions (0.04 M; pH 6.0-10.0). The drug produced a single oxidation step. By differential-pulse voltammetry, a linear response was obtained in B-R buffer pH 6.0 in a concentration range from 2.0 x 10(-7) to 5.0 x 10(-5) M for lansoprazole or omeprazole. The detection limits were 1.0 x 10(-8) and 2.5 x 10(-8) M for lansoprazole and omeprazole, respectively. The method was successfully applied for the analysis of omeprazole and lansoprazole in capsules. The results were comparable to those obtained by spectrophotometry.

Spectrophotometric determination of omeprazole, lansoprazole and pantoprazole in pharmaceutical formulations

The compensation method and other chemometric methods (derivative, orthogonal function and difference spectrophotometry) have been applied to the direct determination of omeprazole, lansoprazole and pantoprazole in their pharmaceutical preparations. The methods have been validated; the limits of detection were found to be 3.3x10(-2), 3.0x10(-2) and 3.5x10(-2) microgram ml(-1) for the three drugs, respectively. The repeatabililty of the methods were found to be 0.3-0.5%. The linearity ranges were found to be 0.5-3.5 microgram ml(-1). The proposed methods have been applied to the determination of the three drugs in their grastro-resistant formulations. The difference spectrophotometric (DeltaA) method is unaffected by the presence of acid induced degradation products; hence can be used as a stability indicating assay.

Omeprazole determination using HPLC with coulometric detection

A sensitive high performance liquid chromatography (HPLC) method for the determination of omeprazole and three related benzimidazoles is reported. Coulometric detection was carried out at +800 mV using a porous carbon electrode. The linear range is 0.01-10 microg/ml. The method has a high degree of precision; the relative standard deviation of omeprazole at a concentration of 1.06 microg/ml was 0.7% (n=4). The cyclic voltammogram of omeprazole is consistent with the hydrodynamic voltammogram exhibiting a single major irreversible oxidative wave with a peak potential at +1105 mV. The response factors for the four compounds are similar indicating that the oxidative process does not involve the sulfur moiety exclusively. The data are most consistent with oxidation primarily of the benzimidazole groups. The method was applied successfully to the determination of omeprazole in a paste formulation.

Comparison of derivative spectrophotometric and liquid chromatographic methods for the determination of omeprazole in aqueous solutions during stability studies

A first derivative spectrophotometric method was developed for the determination of omeprazole in aqueous solutions during stability studies. The derivative procedure was based on the linear relationship between the omeprazole concentration and the first derivative amplitude at 313 nm. The first derivative spectra was developed between 200 and 400 nm (deltalambda = 8). This method was validated and compared with the official high-performance liquid chromatography (HPLC) method of the USP. It showed good linearity in the range of concentrations studied (10-30 microg ml(-1)), precision (repeatability and inter-day reproducibility), recovery and specificity in stability studies. It also seemed to be 2.59 times more sensitive than the HPLC method. These results allowed to consider this procedure as useful for the rapid analysis of omeprazole in stability studies since there was no interference with its decomposition products.

Determination of omeprazole in pharmaceuticals by derivative spectroscopy

A new derivative UV spectroscopic method was developed for the analysis of omeprazole in borate buffer (pH 10.0; 0.1 M). Second derivative spectra were generated between 200-400 nm at N = 9, delta gamma = 31.5. The linearity range for values obtained from second derivative spectra was 0.2-40.0 micrograms ml-1. The developed method was applied to five different commercial preparations of hard gelatin capsules containing enteric coated granules. The relative standard deviations were found to be 2.24% (brand A), 1.87% (brand B), 2.80% (brand C), 4.55% (brand D) and 1.09% (brand E). The data were compared with ones obtained from the polarographic method given in the literature and no difference was found statistically.

Study of 7,7',8,8'-tetracyanoquinodimethane charge transfer complexes with some lone-pair-donating drugs

The interaction between 7,7',8,8'-tetracyanoquinodimethane (TCNQ) and oxamniquine (I), azithromycin (II), omeprazole (III), pantoprazole (IV), and benzydamine hydrochloride (V) was investigated. The reaction conditions were optimized to obtain typical charge transfer complexes (CTC). The nature of the formed complexes was proved by thorough study of the thermodynamic parameters namely delta G (free energy), delta H (enthalpy), and delta S (entropy). The association constant KcAD and the molar absorptivity xi lambda AD of the formed complexes were determined using the Benesi-Hildbrand equation. The effect of temperature on these constants gave evidence of CTC formation. The reaction of TCNQ with I-V was found to be in 1:1; as being determined by the Foster method. Spectrophotometric measurements of the formed CTC were used for the quantitative determination of the studied drugs in both pure or pharmaceutical formulation. The mean percentage recoveries were 99.17 +/- 0.34, 99.75 +/- 0.12, 100.52 +/- 0.41, 98.75 +/- 0.63, and 99.23 +/- 62 for I, II, III, IV, and V, respectively. There was no significant difference observed when the method was statistically compared with the official and reference methods used to determine these drugs.

Experimental design in the development of voltammetric method for the assay of omeprazole

A multivariate strategy was used to optimize an adsorptive stripping voltammetric method for the determination of the antiulcer drug omeprazole. A 3/4 matrix was used for the variable screening while a central composite design was chosen in the subsequent step to evaluate the response surfaces. Simultaneous optimization of the response peak height (hp) and peak half width w1/2), the latter being a peak shape measure, was achieved. The factors accumulation time, pulse amplitude, scan rate and stirring rate were all found to be statistically significant for the response hp, while for the response w1/2 only the stirring rate was found to be significant. The optimized method shows a good linearity between peak height and analyte concentration in the concentration range from 8.33 x 10(-9) M to 1.42 x 10(-7) M with a LOD of 6.5 x 10(-9) M. The mean recovery of omeprazole in capsules was 101.9% with a SD of 2.04 (RSD = 200).