Bioelectrocatalysis of Plant Peroxidases Immobilized on Graphite in Aqueous and Mixed Solvent Media

Detección electroquímica de peróxido de hidrógeno usando peroxidasa de pasto Guinea (Panicum maximum) inmovilizada sobre electrodos serigrafiados de puntos cuánticos

Los biosensores electroquímicos son herramientas analíticas de rápida y confiable respuesta que han adquirido especial interés en los últimos años gracias a la posibilidad de integrar biomoléculas con electrodos hechos a base de materiales nanométricos. En este trabajo se desarrolló un biosensor electroquímico para detección de peróxido de hidrógeno (H2O2) usando peroxidasa de pasto Guinea (PPG) inmovilizada sobre electrodos serigrafiados de puntos cuánticos (ESPC). La PPG fue aislada y parcialmente purificada a partir de hojas de pasto Guinea con una actividad específica de 602 U mg-1. Posteriormente, la PPG fue inmovilizada sobre la superficie del ESPC mediante adsorción física y el estudio del comportamiento electroquímico fue llevado a cabo mediante voltamperometría cíclica y cronoamperometría. La PPG reveló una pareja bien definida de señales redox a 17 mV/-141 mV correspondientes al proceso redox del grupo hemo (Fe2+/Fe3+) de las peroxidasas. La reducción bioelectrocatalítica del peróxido de hidrógeno se observó a un potencial redox de -645 mV vs Ag. Este proceso fue controlado por difusión de las especies en la superficie del electrodo en un rango de velocidad de barrido lineal de 50-500 mV/s. La cronoamperometría permitió la construcción de curvas de calibración entre la corriente de reducción y la concentración del H2O2 para la determinación de parámetros analíticos como sensibilidad, rango lineal y nivel mínimo de detección. El desarrollo de este biosensor amperométrico se convierte en un paso preliminar para la construcción de un dispositivo portátil y de respuesta rápida para el análisis de H2O2 en muestras de interés ambiental y biomédico.

Potential of a sensitive uric acid biosensor fabricated using hydroxyapatite nanowire/reduced graphene oxide/gold nanoparticle

In this study, a ternary nanocomposite consisting of gold nanoparticles (AuNPs), hydroxyapatite (HAP) nanowires, and reduced graphene oxide (rGO) is synthesized by a simple one-step hydrothermal method, which is used to modify glassy carbon electrode (GCE) for detecting uric acid. The nanocomposite is characterized through various methods such as scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. Electrochemical measurements of the modified GCE are performed in a conventional three-electrode system. Experimental results show that the obtained HAP nanowire and rGO are mixed homogeneously, and the AuNPs are deposited into this matrix. The GCE modified by the nanocomposites have superior electrocatalytic activities for uric acid. The peak current intensities of UAO (uricase)/HAP-rGO/AuNPs sensing system linearly increase as the uric acid concentration increases substantially in a range of 1.95 × 10^-5 to 6.0 × 10^-3  M (R² = .9943), with a detection limit of 3.9 × 10^-6  M (S/N = 3) and analytical sensitivity of 13.86 mA/M. The biosensor performs well in determining uric acid concentration in human urine samples.

Peroxidase-catalyzed oligomerization of ferulic acid esters

Valuable information about possible types of linkages, reaction mechanisms, and sequences for oxidative coupling of phenolic compounds in planta is available from in vitro model systems. Ferulate oligomers were generated in a system using ethyl ferulate, peroxidase, and hydrogen peroxide under various conditions. A molar ferulate/H2O2 ratio of 1:1, an ethanol level of 30% in an aqueous sodium phosphate buffer (pH 6.0), and a reaction time of 10 min were considered to be ideal to produce maximal proportions of ferulate trimers and tetramers from ethyl ferulate as starting material. The dominant trimer and tetramer were each isolated from the reaction mixture and identified as 8-O-4/8-5(cyclic)-dehydrotriferulic acid triethyl ester and 8-5(cyclic)/4-O-5/8-5(cyclic)-dehydrotetraferulic acid tetraethyl ester. The structure of the 8-O-4/8-5(cyclic)-dehydrotriferulic acid triethyl ester revealed that a third ferulate unit is bound to a preformed 8-O-4-diferulate dimer, a surprising reaction sequence considering the dominance of 8-5-coupled dimers among dehydrodiferulates in H2O2/peroxidase-based model reactions. As 4-O-5-coupling is not favored in the dimerization process of ferulates, the main tetramer isolated in this study is probably formed by 4-O-5-coupling of two preformed 8-5(cyclic)-diferulates, a logical step in analogy with reactions occurring in lignin biosynthesis.

A Multilayer MEMS Platform for Single-Cell Electric Impedance Spectroscopy and Electrochemical Analysis

The fabrication and characterization of a microchamber electrode array for electrical and electrochemical studies of individual biological cells are presented. The geometry was tailored specifically for measurements from sensory hair cells isolated from the cochlea of the mammalian inner ear. Conventional microelectromechanical system (MEMS) fabrication techniques were combined with a heat-sealing technique and polydimethylsiloxane micromolding to achieve a multilayered microfluidic system that facilitates cell manipulation and selection. The system allowed for electrical stimulation of individual living cells and interrogation of excitable cell membrane dielectric properties as a function of space and time. A three-electrode impedimetric system was incorporated to provide the additional ability to record the time-dependent concentrations of specific biochemicals in microdomain volumes near identified regions of the cell membrane. The design and fabrication of a robust fluidic and electrical interface are also described. The interface provided the flexibility and simplicity of a "cartridge-based" approach in connecting to the MEMS devices. Cytometric measurement capabilities were characterized by using electric impedance spectroscopy (1 kHz-10 MHz) of isolated outer hair cells. Chemical sensing capability within the microchannel recording chamber was characterized by using cyclic voltammetry with varying concentrations of potassium ferricyanide (K(3)Fe(CN)(6)). Chronoamperometric recordings of electrically stimulated PC12 cells highlight the ability of the platform to resolve exocytosis events from individual cells.

Electroenzymatic reactions with oxygen on laccase-modified electrodes in anhydrous (pure) organic solvent

The electroenzymatic reactions of Trametes hirsuta laccase in the pure organic solvent dimethyl sulfoxide (DMSO) have been investigated within the framework for potential use as a catalytic reaction scheme for oxygen reduction. The bioelectrochemical characteristics of laccase were investigated in two different ways: (i) by studying the electroreduction of oxygen in anhydrous DMSO via a direct electron transfer mechanism without proton donors and (ii) by doing the same experiments in the presence of laccase substrates, which display in pure organic solvents both the properties of electron donors as well as the properties of weak acids. The results obtained with laccase in anhydrous DMSO were compared with those obtained previously in aqueous buffer. It was shown that in the absence of proton donors under oxygenated conditions, formation of superoxide anion radicals is prevented at bare glassy carbon and graphite electrodes with adsorbed laccase. The influence of the time for drying the laccase solution at the electrode surface on the electroreduction of oxygen was studied. Investigating the electroenzymatic oxidation reaction of catechol and hydroquinone in DMSO reveals the formation of various intermediates of the substrates with different electrochemical activity under oxygenated conditions. The influence of the content of aqueous buffer in the organic solvent on the electrochemical behaviour of hydroquinone/1,4-benzoquinone couple was also studied.

Bioluminescence of monolayers of firefly luciferase immobilized on graphite

We report on the immobilization of the firefly protein luciferase on the hydrophobic surface of graphite. Observation by liquid-phase atomic force microscopy of islands with a height consistent with the size of a single molecule confirmed that the protein was contained within a monomolecular layer. The enzyme activity was assayed by single-photon counting of the bioluminescence, which is the catalytic product of luciferase. Attachment to the surface modified the efficiency of the enzyme, but the introduction of the substrates luciferin and ATP resulted in the reactivation of the enzyme. The functionalized graphite surface was employed as a cathode in a bioelectrochemical cell. This demonstrated that the electric field caused a substantial loss of enzyme catalytic activity.

Palm tree peroxidase-based biosensor with unique characteristics for hydrogen peroxide monitoring

Three amperometric enzyme electrodes have been constructed by adsorbing anionic royal palm tree peroxidase (RPTP), anionic sweet potato peroxidase (SPP), or cationic horseradish peroxidase (HRP-C) on spectroscopic graphite electrodes. The resulting H(2)O(2)-sensitive biosensors were characterized both in a flow injection system and in batch mode to evaluate their main bioelectrochemical parameters, such as pH dependency, I(max), K(M)(app), detection limit, linear range, operational and storage stability. The obtained results showed a distinctly different behavior for the plant peroxidase electrodes, demonstrating uniquely superior characteristics of the RPTP-based sensors. The broader linear range observed for the RPTP-based biosensor is explained by a high stability of this enzyme in presence of H(2)O(2). The higher storage and operational stability of RPTP-based biosensor as well as its capability to measure hydrogen peroxide under acidic conditions connect with an extremely high thermal and pH-stability of RPTP.