The Analysis of Chlorinated Phenol Solutions by Capillary Electrophoresis Coupled with Direct and Indirect Amperometric Detection Using a Boron-Doped Diamond Microelectrode

Determination of Three Main Chlorogenic Acids in Water Extracts of Coffee Leaves by Liquid Chromatography Coupled to an Electrochemical Detector

Coffee is a beverage widely consumed in the world. The coffee species most commercialized worldwide are Arabica (Coffea arabica) and Robusta (Coffea canephora). Roasted coffee beans are the most used, but coffee leaves are also consumed as infusion in several countries for traditional medicinal purposes. They contain several interesting phenolic antioxidant compounds mainly belonging to chlorogenic acids (CGAs). In the present work, a liquid chromatography-electrochemical detection (LC-EC) method was developed for the determination of three main chlorogenic acid isomers, namely 3-, 4-, and 5-caffeoylquinic acids (CQA), in coffee leaves aqueous extracts. Samples from eight coffee species, namely; Coffea arabica, Coffea canephora, Coffea liberica, Coffea humilis, Coffea mannii, Coffea charrieriana, Coffea anthonyi, and Coffea liberica var. liberica, were grown and collected in tropical greenhouses. Linearity of the calibration graphs was observed in the range from the limit of quantification to 1.0 × 10-5 M, with R² equal to 99.9% in all cases. High sensitivity was achieved with a limit of detection of 1.0 × 10-8 M for 3-CQA and 5-CQA (i.e., 3.5 µg/L) and 2.0 × 10-8 M for 4-CQA (i.e., 7.1 µg/L). The chromatographic profile of the samples harvested for each Coffea species was studied comparatively. Obtained raw data were pretreated for baseline variations and shifts in retention times between the chromatographic profiles. Principal Component Analysis (PCA) was applied to the pretreated data. According to the results, three clusters of Coffea species were found. In the water sample extracts, 5-CQA appeared to be the major isomer, and some species contained a very low amount of CQAs. Fluctuations were observed depending on the Coffea species and harvesting period. Significant differences between January and July were noticed regarding CQAs content. The species with the best CQAs/caffeine ratio was identified. The LC-EC data were validated by liquid chromatography-high resolution mass spectrometry (LC-HRMS).

Determination of Phenol and Chlorophenols at Single-Wall Carbon Nanotubes/Poly(3,4-ethylenedioxythiophene) Modified Glassy Carbon Electrode Using Flow Injection Amperometry

Phenol and chlorophenols were investigated using single-wall carbon nanotubes (SWCNT) and poly(3,4-ethylenedioxythiophene) (PEDOT) composite modified glassy carbon electrode (SWCNT/PEDOT/GCE) as a detector in flow injection system. Optimization of experimental variables such as the detection potential, flow rate, and pH of the carrier solution (0.1 M sodium acetate) for the determination of phenol (P), 4-chlorophenol (CP), 2,4-dichlorophenol (DCP), 2,4,6-trichlorophenol (TCP), and pentachlorophenol (PCP) were performed. Under these conditions, analytical parameters were calculated from the calibration curve of measured amperometric responses as a function of concentrations of phenol and chlorophenols. The designed electrode exhibited very good analytical performance. The designed electrode was tested with 20 repetitive injections of each analyte and showed good operational stability. The analytical performance of the SWCNT/PEDOT/GCE electrode under flow through conditions was tested and was found to be impressive. The electrode showed a wider dynamic range for the detection of phenol and chlorophenols with low limits of detection compared with other enzymatic and nonenzymatic sensors. These results suggest that the method is quite useful for the analysis and monitoring of phenols and chlorophenols.

Understanding changes in uptake and release of serotonin from gastrointestinal tissue using a novel electroanalytical approach

Serotonin (5-HT) is well known to be a key neurotransmitter within the gastrointestinal (GI) tract, where it is responsible for influencing motility. Obtaining dynamic information about the neurotransmission process (specifically the release and reuptake of 5-HT) requires the development of new approaches to measure the extracellular 5-HT concentration profile. In this work constant-potential amperometry has been utilised at +650 mV vs. Ag|AgCl to measure in vitro the overflow of 5-HT. Steady-state levels of 5-HT have been observed, due to continuous mechanical stimulation of the tissue from the experimental protocol. Measurements are conducted at varying tissue-electrode distances in the range of 5 to 1100 microm. The difference in the current from the bulk media and that from each tissue-electrode distance is obtained, and the natural log of this current is plotted versus the tissue-electrode distance. The linear fit to the log of the current is derived, and its intercept, I(0), with the vertical axis and its slope are calculated. The reciprocal of the slope, indicated as slope(-1), is used as a marker of reuptake. The ratio between intercept, I(0), and the reciprocal of the slope, I(0)/slope(-1), is a measure of the flux at the tissue surface and it can be used as a marker for the 5-HT release rate. Current measurements for ileum and colon tissue indicated a significantly higher reuptake rate in the colon, showed by a lower slope(-1). In addition, the ratio, I(0)/slope(-1), indicated that the colon has a higher 5-HT flux compared to the ileum. Following the application of the serotonin selective reuptake inhibitor (SSRI), fluoxetine, both tissues showed a higher value of slope(-1), as the reuptake process is blocked preventing clearance of 5-HT. No differences were observed in the ratio, I(0)/slope(-1), in the ileum, but a decrease was observed in the colon. These results indicate that ileum and colon are characterised by different reuptake and release processes. The new approach we propose provides pivotal information on the variations in the signalling mechanism, where steady state levels are observed and can be a vital tool to study differences between normal and diseased tissue and also the efficacy of pharmacological agents.

Continuous amperometric detection of co-released serotonin and melatonin from the mucosa in the ileum

Serotonin (5-HT) and melatonin (MEL) are well known neurotransmitters and paracrine signalling molecules. Both compounds are present in enterochromaffin (EC) cells in the mucosa of the gastrointestinal tract and are thought to play a role in controlling gut motility. To date there are no real-time analytical methods for the detection of these two molecules and it is not clear if MEL is actually released from the EC cells. In this paper, I used boron-doped diamond (BDD) microelectrodes to record 5-HT and MEL overflow from EC cells in the mucosa of rabbit ileum. The BDD microelectrode was extremely stable and sensitive for measurements of both compounds when assessed using differential pulse voltammetry (DPV) and flow injection analysis (FIA) using amperometric detection. MEL release was detected in the mucosa, where it is most likely from the EC cells. Mechanical stimulation of individual villi increased 5-HT but not MEL overflow. Application of the serotonin transporter (SERT) inhibitor, fluoxetine, elevated the 5-HT but not the MEL signal. Differences in the amounts of the two gastrointestinal compounds released and the mechanism of which they are released will provide insights to the physiology of the EC cell and disease states.

Analysis of inorganic and small organic ions by CE with amperometric detection

Capillary electrophoresis has become a widely useful analytical technology. Amperometric detection is extensively employed in capillary electrophoresis for its many inherent virtues, such as rapid response, remarkable sensitivity, and low cost of both detectors and instrumentations. Analysis of inorganic and small organic ions by capillary electrophoresis is an important research field. This review focuses on the recent developments of capillary electrophoresis coupled with amperometric detection for analysis of inorganic and small organic ions. Advancements in electrophoresis separation modes, amperometric detection modes, working electrodes, and applications of inorganic ions, amino acids, phenols, and amines are discussed.

Capillary electrophoresis and microchip capillary electrophoresis with electrochemical and electrochemiluminescence detection

Recent advances and key strategies in capillary electrophoresis and microchip CE with electrochemical detection (ECD) and electrochemiluminescence (ECL) detection are reviewed. This article consists of four main parts: CE-ECD; microchip CE-ECD; CE-ECL; and microchip CE-ECL. It is expected that ECD and ECL will become powerful tools for CE microchip systems and will lead to the creation of truly disposable devices. The focus is on papers published in the last two years (from 2005 to 2006).

Chlorinated Phenol Analysis Using Off-Line Solid-Phase Extraction and Capillary Electrophoresis Coupled with Amperometric Detection and a Boron-Doped Diamond Microelectrode

The analysis of chlorinated phenols (2-chlorophenol, 3-chlorophenol, 4-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, pentachlorophenol) in river water was accomplished using off-line solid-phase extraction (SPE) and capillary electrophoresis coupled with electrochemical detection. A key to the sensitive, reproducible, and stable detection of these pollutants was the use of a boron-doped diamond microelectrode in the amperometric detection mode. An off-line SPE procedure was utilized to extract and preconcentrate the pollutants prior to separation and detection, with ENVI-Chrom P, a highly cross-linked styrene-divinylbenzene copolymer, being employed as the sorbent. Pollutant recoveries in the 95-100% range with relative standard deviations of 1-4% were achieved. The diamond microelectrode provided a low and stable background current with low peak-to-peak noise. The oxidative detection of the pollutants was accomplished at +1.05 V vs Ag/AgCl without the need for electrode pretreatment. The method was evaluated in terms of the linear dynamic range, sensitivity, limit of quantitation, response precision, and response stability. A reproducible electrode response was observed during multiple injections of the chlorinated phenol solutions with a relative standard deviation of < or =5.4%. Good electrode response stability was observed over many days of continuous use with no significant electrode deactivation or fouling. The separation efficiencies for all six pollutants were greater than 170,000 plates/m. The minimum concentration detectable for all six ranged from 0.02 to 0.2 ppb (S/N > or = 3) using a 250:1 preconcentration factor.