Detection of Trace Phenol Based on Mesoporous Silica Derived Tyrosinase-Peroxidase Biosensor

Peroxidase enzymes as green catalysts for bioremediation and biotechnological applications: A review

The fast-growing consumer demand drives industrial process intensification, which subsequently creates a significant amount of waste. These products are discharged into the environment and can affect the quality of air, degrade water streams, and alter soil characteristics. Waste materials may contain polluting agents that are especially harmful to human health and the ecosystem, such as the synthetic dyes, phenolic agents, polycyclic aromatic hydrocarbons, volatile organic compounds, polychlorinated biphenyls, pesticides and drug substances. Peroxidases are a class oxidoreductases capable of performing a wide variety of oxidation reactions, ranging from reactions driven by radical mechanisms, to oxygen insertion into CH bonds, and two-electron substrate oxidation. This versatility in the mode of action presents peroxidases as an interesting alternative in cleaning the environment. Herein, an effort has been made to describe mechanisms governing biochemical process of peroxidase enzymes while referring to H₂O₂/substrate stoichiometry and metabolite products. Plant peroxidases including horseradish peroxidase (HRP), soybean peroxidase (SBP), turnip and bitter gourd peroxidases have revealed notable biocatalytic potentialities in the degradation of toxic products. On the other hand, an introduction on the role played by ligninolytic enzymes such as manganese peroxidase (MnP) and lignin peroxidase (LiP) in the valorization of lignocellulosic materials is addressed. Moreover, sensitivity and selectivity of peroxidase-based biosensors found use in the quantitation of constituents and the development of diagnostic kits. The general merits of peroxidases and some key prospective applications have been outlined as concluding remarks.

Electrochemical Biosensors Employing Natural and Artificial Heme Peroxidases on Semiconductors

Heme peroxidases are widely used as biological recognition elements in electrochemical biosensors for hydrogen peroxide and phenolic compounds. Various nature-derived and fully synthetic heme peroxidase mimics have been designed and their potential for replacing the natural enzymes in biosensors has been investigated. The use of semiconducting materials as transducers can thereby offer new opportunities with respect to catalyst immobilization, reaction stimulation, or read-out. This review focuses on approaches for the construction of electrochemical biosensors employing natural heme peroxidases as well as various mimics immobilized on semiconducting electrode surfaces. It will outline important advances made so far as well as the novel applications resulting thereof.

3-Methoxyphenol chemical sensor fabrication with Ag2O/CB nanocomposites

The proposed chemical sensor based on Ag₂O/CB nanocomposites is developed by electrochemical approach for the detection of hazardous selective 3-methoxyphenol chemical sensor for the safety of the environment sector in a broad scale.

The performance of mesoporous organosilicas with phenyl groups in Heme protein immobilization

We demonstrate the influence of phenyl groups in the pore structure of mesoporous organosilicas, on the quantity of absorbed enzyme and the activity of immobilized enzyme.

Enzyme nanoarchitectonics: organization and device application

Fabrication of ultrasmall functional machines and their integration within ultrasmall areas or volumes can be useful for creation of novel technologies. The ultimate goal of the development of ultrasmall machines and device systems is to construct functional structures where independent molecules operate as independent device components. To realize exotic functions, use of enzymes in device structures is an attractive solution because enzymes can be regarded as efficient machines possessing high reaction efficiencies and specificities and can operate even under ambient conditions. In this review, recent developments in enzyme immobilization for advanced functions including device applications are summarized from the viewpoint of micro/nano-level structural control, or nanoarchitectonics. Examples are roughly classified as organic soft matter, inorganic soft materials or integrated/organized media. Soft matter such as polymers and their hybrids provide a medium appropriate for entrapment and encapsulation of enzymes. In addition, self-immobilization based on self-assembly and array formation results in enzyme nanoarchitectures with soft functions. For the confinement of enzymes in nanospaces, hard inorganic mesoporous materials containing well-defined channels play an important role. Enzymes that are confined exhibit improved stability and controllable arrangement, which are useful for formation of functional relays and for their integration into artificial devices. Layer-by-layer assemblies as well as organized lipid assemblies such as Langmuir-Blodgett films are some of the best media for architecting controllable enzyme arrangements. The ultrathin forms of these films facilitate their connection with external devices such as electrodes and transistors. Artificial enzymes and enzyme-mimicking catalysts are finally briefly described as examples of enzyme functions involving non-biological materials. These systems may compensate for the drawbacks of natural enzymes, such as their instabilities under harsh conditions. We believe that enzymes and their mimics will be freely coupled, organized and integrated upon demand in near future technologies.

Amperometric phenol biosensor based on covalent immobilization of tyrosinase on Au nanoparticle modified screen printed carbon electrodes

A highly selective and sensitive amperometric biosensor for the detection of phenol was developed based on a platform where Au nanoparticles (AuNPs) are electrodeposited onto a disposable screen printed carbon electrode and tyrosinase is then covalently immobilized on the AuNP's using alkanethiol and cross-linker molecules. The electrocatalytic responses of the tyrosinase modified biosensor for the detection of phenol were measured using both cyclic voltammetry and square wave voltammetry. Temperature, buffer pH and the amount of tyrosinase immobilized on the electrode surface were also optimized for phenol sensing. A high sensitivity of 15.7 µA ppm(-1), a low detectable phenol concentration of 47 ppb alongside a linear response from 47 ppb to 15 ppm was achieved using square wave voltammetry in addition to good selectivity. As a demonstration, the biosensor was applied to determine phenol concentrations in regional water samples from S. Korea.

Micro- to nanostructured poly(pyrrole-nitrilotriacetic acid) films via nanosphere templates: applications to 3D enzyme attachment by affinity interactions

We report the combination of latex nanosphere lithography with electropolymerization of N-substituted pyrrole monomer bearing a nitrilotriacetic acid (NTA) moiety for the template-assisted nanostructuration of poly(pyrrole-NTA) films and their application for biomolecule immobilization. The electrodes were modified by casting latex beads (100 or 900 nm in diameter) on their surface followed by electropolymerization of the pyrrole-NTA monomer and the subsequent chelation of Cu(2+) ions. The dissolution of the nanobeads leads then to a nanostructured polymer film with increased surface. Thanks to the versatile affinity interactions between the (NTA)Cu(2+) complex and histidine- or biotin-tagged proteins, both tyrosinase and glucose oxidase were immobilized on the modified electrode. Nanostructuration of the polypyrrole via nanosphere lithography (NSL) using 900- and 100-nm latex beads allows an increase in surface concentration of enzymes anchored on the functionalized polypyrrole electrode. The nanostructured enzyme electrodes were characterized by fluorescence microscopy, 3D laser scanning confocal microscopy, and scanning electron microscopy. Electrochemical studies demonstrate the increase in the amount of immobilized biomolecules and associated biosensor performances when achieving NSL compared to conventional polymer formation without bead template. In addition, the decrease in nanobead diameter from 900 to 100 nm provides an enhancement in biosensor performance. Between biosensors based on films polymerized without nanobeads and with 100-nm nanobeads, maximum current density values increase from 4 to 56 μA cm(-2) and from 7 to 45 μA cm(-2) for biosensors based on tyrosinase and glucose oxidase, respectively.

Highly sensitive amperometric biosensors for phenols based on polyaniline-ionic liquid-carbon nanofiber composite

A novel polyaniline-ionic liquid-carbon nanofiber (PANI-IL-CNF) composite was greenly prepared by in situ one-step electropolymerization of aniline in the presence of IL and CNF for fabrication of amperometric biosensors. The scanning electron micrographs confirmed that the PANI uniformly grew along with the structure of CNF and the PANI-IL-CNF composite film showed a fibrillar morphology with the diameter of around 95 nm. A phenol biosensor was constructed by immobilizing tyrosinase on the surface of the composite modified glassy carbon electrode via the cross-linking step with glutaraldehyde. The biosensor exhibited a wide linear response to catechol ranging from 4.0 x 10(-10) to 2.1 x 10(-6)M with a high sensitivity of 296+/-4 AM(-1)cm(-2), a limit of detection down to 0.1 nM at the signal to noise ratio of 3 and applied potential of -0.05 V. According to the Arrhenius equation, the activation energy for enzymatic reaction was calculated to be 38.8 kJmol(-1) using catechol as the substrate. The apparent Michaelis-Menten constants of the enzyme electrode were estimated to be 1.44, 1.33, 1.16, 0.65 microM for catechol, p-cresol, phenol, m-cresol, respectively. The functionalization of CNF with PANI in IL provided good biocompatible platform for biosensing and biocatalysis.

Aminopyrene functionalized mesoporous silica for the selective determination of resorcinol

Aminopyrene was convalently anchored onto the surface of mesoporous MCM-41 silica by post-grafting. This organic-inorganic hybrid has been applied as sensing material to phenols determination. Experimental results reveal that the functionalized material presents good sensitivity and selectivity towards resorcinol and can be used for resorcinol determination in water at pH 6.0. The fluorescence intensity of aminopyrene functionalized mesoporous silica decreases proportionally to the logarithm of resorcinol concentration in water. The linear range for resorcinol detection lies in 4.79-163muM with a detection limit of 2.86muM (S/N=3).

Immobilization of cholesterol esterase and cholesterol oxidase onto sol–gel films for application to cholesterol biosensor

Cholesterol oxidase (ChOx) and cholesterol esterase (ChEt) have been covalently immobilized onto tetraethylorthosilicate (TEOS) sol-gel films. The tetraethylorthosilicate sol-gel/ChEt/ChOx enzyme films thus prepared have been characterized using scanning electron microscopic (SEM), UV-vis spectroscopic, Fourier-transform-infrared (FTIR) spectroscopic and amperometric techniques, respectively. The results of photometric measurements carried out on tetraethylorthosilicate sol-gel/ChEt/ChOx reveal thermal stability up to 55 degrees C, response time as 180 s, linearity up to 780 mg dL(-1) (12 mM), shelf life of 1 month, detection limit of 12 mg dL(-1) and sensitivity as 5.4 x 10(-5) Abs. mg(-1) dL(-1).