Novel Biomedical Sensors for Flow Injection Potentiometric Determination of Creatinine in Human Serum

Non-enzymatic paper-based analytical device for direct potentiometric detection of urine creatinine

A paper-based analytical device (PAD) with an integrated composite electrode has been designed and fabricated for non-enzymatic creatinine sensing. Reduced graphene oxide (rGO) was employed to modify the PAD so that it could function as a solid-contact transducer. A new macrocyclic pyrido-hexapeptide derivative was made and used as a special ionophore in the creatinine membrane sensor. The synthesized PAD showed a detection limit of 1.0 µM (S/N = 3) and a potentiometric response towards creatinine throughout a log-linear range of 2.0 µM-10 mM (R2 = 0.9998). The sensor shows significant selectivity for a few related substances, including ephedrine, codeine, ketamine, caffeine, urea, urate, carbinoxamine, and dextromethorphan. It has been established that the testing method is appropriate for the direct potentiometric detection of creatinine in a variety of human urine sample types. When an indicating electrode and a reference electrode are put on the same flexible disposable, this lets applications with a small sample volume be done. For point-of-care creatinine measurement, the developed paper-based analytical equipment is a good choice because it is affordable, easily accessible, and self-pumping (especially when combined with potentiometric detection).

Amr AEG, Almehizia AA, Naglah AM, H. Kamel A. New Potentiometric Screen-Printed Platforms Modified with Reduced Graphene Oxide and Based on Man-Made Imprinted Receptors for Caffeine Assessment

Caffeine is a psychoactive drug that is administered as a class II psychotropic substance. It is also considered a component of analgesics and cold medicines. Excessive intake of caffeine may lead to severe health damage or drug addiction problems. The assessment of normal caffeine consumption from abusive use is not conclusive, and the cut-off value for biological samples has not been established. Herein, new cost-effective and robust all-solid-state platforms based on potentiometric transduction were fabricated and successfully utilized for caffeine assessment. The platforms were modified with reduced graphene oxide (rGO). Tailored caffeine-imprinted polymeric beads (MIPs) based on methacrylic acid (MAA) and ethylene glycol dimethacrylate (EGDMA) were prepared, characterized, and used as recognition receptors in the presented potentiometric sensing devices. In 50 mM MES buffer, the sensors exhibited a slope response of 51.2 ± 0.9 mV/decade (n = 6, R2 = 0.997) over the linear range of 4.5 × 10−6−1.0 × 10−3 M with a detection limit of 3.0 × 10−6 M. They exhibited fast detection of caffeinium ions with less than 5 s response time (<5 s). The behavior of the presented sensors towards caffeinium ions over many common organic and inorganic cations was evaluated using the modified separate solution method (MSSM). Inter-day and intra-day precision for the presented analytical device was also evaluated. Successful applications of the presented caffeine sensors for caffeine determination in commercial tea and coffee and different pharmaceutical formulations were carried out. The data obtained were compared with those obtained by the standard liquid chromatographic approach. The presented analytical device can be considered an attractive tool for caffeine determination because of its affordability and vast availability, particularly when combined with potentiometric detection.

On-line 'protein shaker': A multicommutated flow analysis system for fluorometric creatinine determination in deproteinized serum

A fully mechanized multicommutated flow analysis (MCFA) system for fluorometric determination of creatinine in serum samples is introduced in this paper. The flow system was constructed with microsolenoid pumps and valves and with a 3D-printed flow cell. Fluorometric assay relied on creatinine reaction with 3,5-dinitrobenzoic acid and hydrogen peroxide in an alkaline environment. To overcome significant interference from protein, a flow reactor for serum deproteinization was designed and implemented in the flow system. The deproteinization was carried out by precipitation with trichloroacetic acid and the addition of sodium chloride facilitated the precipitate sedimentation. The supernatant representative sample was pumped out and subjected to fluorometric creatinine assay. The obtained linear range was from 1.6 to 500 μmol L^-1 and the precision, expressed as RSD, was below 3%. The proposed MCFA system was used to determine creatinine concentration in control serum samples. The results obtained with flow deproteinization correlated well with results obtained with conventional deproteinization (y = (0.91 ± 0.09) x + (37 ± 28)) with Pearson's r 0.979.

Effective screen-printed potentiometric devices modified with carbon nanotubes for the detection of chlorogenic acid: application to food quality monitoring

All-solid state screen-printed electrodes were fabricated for chlorogenic acid (CGA) detection. The screen-printed platforms were modified with multi-walled carbon nanotubes (MWCNTs) to work as a lipophilic solid-contact transducer. The sensing-membrane was plasticized with a suitable solvent mediator and incorporating [NiII(bathophenanthroline)3][CGA]2 complex as a sensory material. In a 30 mM phosphate solution (buffer, pH 6), the sensor revealed a Nernstian-response towards CGA ions with a slope of -55.1 ± 1.1 (r 2 = 0.9997) over the linear range 1.0 × 10-7 to 1.0 × 10-3 (0.035-354.31 μg mL-1) with a detection limit 7.0 × 10-8 M (24.8 ng mL-1). It revealed a stable potentiometric response with excellent reproducibility and enhanced selectivity over several common ions. Short-term potential stability and the interfacial sensor capacitance was estimated using both electrochemical-impedance spectroscopy (EIS) and chronopotentiometry techniques. The presented electrochemical platform revealed the merits of design simplicity, ease of miniaturization, good potential-stability, and cost-effectiveness. It is successfully applied to CGA determination in different coffee beans extracts and juice samples. The data obtained were compared with those obtained by liquid chromatography reference method (HPLC).

Paper-Based Potentiometric Device for Rapid and Selective Determination of Salicylhydroxamate as a Urinary Struvite Stone Inhibitor

Novel paper-based potentiometric platforms for rapid, cost-effective, and simple determination of the salicylhydroxamic acid (SHAM) drug are presented. Both the SHAM sensor and the reference Ag/AgCl electrode were integrated together on the miniaturized paper platforms. The ion-sensing membrane for the presented sensor is based on the use of SnIV-tetraphenylporphyrin (SnIVTPP) as a charged carrier within a plasticized poly(vinyl chloride) (PVC) matrix. Multiwalled carbon nanotubes (MWCNTs) were used as an ion-to-electron transducer. The resulting sensor revealed a rapid and stable response with a Nernstian slope of -59.3 ± 0.7 mV/decade over the linear range of 1.0 × 10-6 to 1.0 × 10-3 M and a detection limit of 0.7 μM. All measurements were carried out in 30 mM phosphate-buffered solution (PBS) at pH 7.2. Intra- and interday precision were measured and found to be 1.7%. The relative standard deviation (RSD%) ( = 5) was calculated as 2.43% after utilizing five different electrodes (n = 5). The selectivity behavior of the prepared electrodes in the absence and presence of ionic additives was evaluated. The selectivity pattern showed a non-Hofmeister selectivity pattern in the existence of anionic additives with enhanced potentiometric selectivity for SHAM over different lipophilic anions (e.g., ClO4 -, SCN-, and I-). The presented device was successfully applied for SHAM determination in pharmaceutical preparations. This paper-based analytical device can be potentially manufactured at large scales and provides a portable, rapid, disposable, and cost-effective analytical tool for measuring the SHAM drug.

A review of recent advances in non-enzymatic electrochemical creatinine biosensing

Creatinine biosensing is a rapidly developing field owing to the clinical relevance of creatinine as a vital biomarker for several diseases associated with renal, thyroidal, and muscular dysfunctions. Over the years, we have observed numerous creatinine biosensing strategies, including the most widely studied enzymatic creatinine biosensors. Though the enzymatic approach provides excellent selectivity and reliability, it has certain drawbacks, which include high fabrication cost and poor storage stability (that is inherent to every enzyme-based biosensors). This has led to the development of non-enzymatic creatinine biosensors, of which electrochemical sensors are the most promising for point-of-care applications. However, only a limited number of studies have been conducted and there is a lack of reviews addressing the recent advances in this research area. Herein, we present for the first time, a review with a prime focus on the various strategies implemented in non-enzymatic electrochemical creatinine biosensing. We aim to offer a comprehensive context on the achievements and limitations of currently available non-enzymatic electrochemical creatinine biosensors and address the underlying factors pertaining to the interplay of modification/fabrication techniques with the sensitivity, selectivity, interferences, and long-term storage stability of the biosensor. We hope that this work shall prove to be seminal in the conception and advancement of future non-enzymatic electrochemical creatinine biosensors.

Paper-Based Potentiometric Sensors for Nicotine Determination in Smokers' Sweat

Herein, we describe for the first time, the design and fabrication of a novel nicotine paper-based sensor, in which a miniaturized paper reference electrode is integrated for potentiometric measurements. The paper-based sensors were designed using printed wax barriers to define the electrochemical cell and the sample zones. The electrodes were based on the use of the ion association complexes of the nicotinium cation (Nic) with either tetraphenylborate (TPB) or 5-nitrobarbiturate (NB) counter anions as sensing materials for nicotine recognition. A poly (3,4 ethylenedioxythiophene)/poly-(styrene sulfonate) (PEDOT/PSS) conducting polymer was used as an ion-to-electron transducer. The performance characteristics of the proposed sensors were evaluated and it revealed a rapid and stable response with a Nernstian slope of 55.2 ± 0.3 and 51.2 ± 0.6 mV/decade over the linear range of 1.0 × 10^-5 to 1.0 × 10^-2 M and detection limits of 6.0 and 8.0 μM for [Nic/TPB] and [Nic/NB], respectively. The sensors revealed a constant response over the pH range 3.5-6.5. The designed sensors provided a portable, inexpensive, and disposable way of measuring trace levels of nicotine coming from different cigarettes and in the collected human sweat of heavy smokers. All results were compared favorably with those obtained by the standard gas chromatographic method.

An all-solid-state potentiometric sensor modified with multi-walled carbon nanotubes (MWCNTs) for silicate assessment and water-quality testing

A simple and cost-effective approach is proposed for silicate ion determination. The approach is based on designing an all-solid-state potentiometric sensor. The plasticized polyvinyl chloride (PVC) membrane sensor is based on the ion-association complex [Ni(bphen)₃]²⁺[SiO₃]^2- as a sensory recognition material. The sensor is modified with multi-walled carbon nanotubes (MWCNTs) as an ion-to-electron transducer material. The performance characteristics of the new silicate-selective electrode were evaluated using a potentiometric water-layer test, potentiometric measurements, impedance spectroscopy, and current-reversal chronopotentiometry. The developed electrodes exhibited a low detection limit (0.11 μg mL^-1) over a wide linear range (4.0 × 10^-6 to 1.0 × 10^-3 M) and near-Nernstian sensitivity (slope = -28.1 ± 1.4 mV per decade). They presented a very short response time (<5 s) over the pH range 6-12 and provided acceptable reliability, ease of design and miniaturization, and high potential stability, in addition to good accuracy and precision. The sensors exhibited enhanced selectivity for silicate over many common interfering anions, such as SO₄^2-, NO₃^-, CH₃COO^-, CO₃^2-, Cl^-, S^2-, and PO₄^3-. These results could qualify the developed sensor to be used in a successful way for the trace determination of silicate ions in different matrices. The developed method was successfully applied to the potentiometric detection of silicate in different pre-packaged bottled drinking water samples.

Cacodylate Sensors and their Application in the Determination of Amino Acid Levels in Biological Samples

BACKGROUND

The importance of recognizing and quantifying chemical anions/cations found in various types of samples, including environmental and biological samples, has been extensively studied. Recent findings suggest the possibility of health risks caused by organic compound dimethylarsinic acid (DMAs) rather than its inorganic arsenic metabolite.

OBJECTIVE

This article aims to fabricate polymeric-membrane electrochemical sensors with high sensitivity and selectivity for the cacodylic acid sodium salt dimethylarsinate (DMAs) based on silver diethyldithiocarbamate (AgDDTC) and CuIIphthalocyanine (CuPC) as novel neutral carriers and their applications.

METHOD

DMAs calibration relations and titrations were carried out using a potentiometric workstation equipped with a double-junction reference electrode, in conjunction with the fabricated working electrodes.

RESULTS

Sensors revealed fast and stable anionic response with near-Nernstian slopes (-38.6 ± 0.9 and -31.5 ± 0.6 mV/decade), within concentration ranges (1.7 × 10-5 -1.0 × 10-2 and 3.0 × 10-5 -1.0 × 10-2 M) and detection limits (1.0 × 10-5 and 1.6 × 10-5 M) for AgDDTC- and CuPC-based sensors, respectively. Sensors are characterized by extended life-time, signal stability, high precision and short response times. Selectivity for the cacodylate anion over most common anions was tested for the proposed electrodes. Sensors were satisfactorily applied for DMAs quantification in biological matrices with recoveries ranging between 96.2 and 99.0%. Membrane sensors were interfaced with a flow-through system for continuous monitoring of DMAs. The sensors were tested for the assay of different amino acids based on their reaction with cacodylate, where reaction end points were monitored with the proposed electrodes using direct potentiometric determination and flow injection analysis (FIA).

CONCLUSIONS

Potentiometric ion-selective PVC-membrane electrodes based on silver diethyldithiocarbamate (AgDDTC) and CuIIphthalothyanine (CuPC) provide adequate and reliable means for the determination of dimethylarsenate anion (cacodylate anion, DMAs). These membrane electrodes are easy to manufacture, they have the advantages of high selectivity and sensitivity, broad dynamic ranges, low detection limits, quick response times and cost effectiveness. Such properties make these sensors suitable for the assay of DMAs levels in aqueous solutions by direct potentiometry, flow injection and potentiometric titration, as well as in monitoring of the titration end points of the reactions between various amino acids and DMAs anion in aqueous solutions.

HIGHLIGHTS

Simple electrochemical membranes for dimethylarsinate (DMAs) were prepared, based on diethyldithiocarbamate (AgDDTC) and CuIIphthalocyanine (CuPC). - DMAs sensors were fabricated in two different modules: batch (for static) and flow-through (for hydrodynamic) approaches. - Levels of DMAs were determined in spiked biological samples. - AgDDTC-based sensors were successfully applied in the determination of several amino acids via potentiometric titration with DMAs.

Novel Potentiometric Screen-printed Carbon Electrodes for Bisphenol S Detection in Commercial Plastic Samples

Novel miniaturized poly(vinyl chloride) matrix membrane sensors based on screen-printed carbon electrodes and responsive to bisphenol S (BPS) were formulated. Polymeric membranes are based on an ion-pair complex of BPS anion with an Aliquat 336S counter cation. A solid conductive contact of multi-walled carbon nanotubes (MWCNTs) was used on screen-printed carbon platforms. After drop-casting and drying of the MWCNTs on a carbonaceous substrate, it was coated with a layer of polymeric poly(vinyl chloride) PVC sensing membrane containing the recognition complex. Prepared electrodes revealed a near-Nernstian response towards BPS with a -28.2 ± 0.8 mV/decade anionic slope, 0.02 μg/mL detection limit and 2.5 × 10-7 - 1.0 × 10-3 M concentration range (r2 = -0.9994). Signals were recorded in a 30 mM HCO3-/CO32- buffer, pH 10, with fast response times <10 s. A suggested sensing system was effectively applied in the quantitative determination of diminished BPS levels released from plastic bottle samples, and obtained results were statistically assessed against a chromatographic HPLC independent reference method.

Solid-State Membrane Sensors Based on Man-Tailored Biomimetic Receptors for Selective Recognition of Isoproturon and Diuron Herbicides

Solid-contact ion-selective electrodes (SC-ISEs) have shown great potential for routine and portable ion detection. The introduction of nanomaterials as ion-to-electron transducers and the adoption of different performance-enhancement strategies have significantly promoted the development of SC-ISEs. Herein, new solid-contact ion-selective electrodes, along with the implementation of multiwalled carbon nanotubes (MWCNTs) as ion-to-electron transducers and potassium tetrakis (p-chlorophenyl) borate (KTpClB) as lipophilic ionic additives, were presented for the detection of isoproturon (IPU) and diuron (DU) herbicides. Molecularly imprinted polymers (MIPs), with special molecule recognition properties for isoproturon (IPU) and diuron (DU), were prepared, characterized, and introduced as sensory recognition materials in the presented electrodes. Sensors revealed a near-Nernstian response for both isoproturon (IPU) and diuron (DU) with slopes of 53.1 ± 1.2 (r² = 0.997) and 57.2 ± 0.3 (r² = 0.998) over the linear ranges of 2.2 × 10^-6-1.0 × 10^-3 M and 3.2 × 10^-6-1.0 × 10^-3 M with detection limits of 8.3 × 10^-7 and 1.4 × 10^-6 M, respectively. The response time of the presented sensors was found to be <5 s and the lifetime was at least eight weeks. The sensors exhibited good selectivity towards isoproturon (IPU) and diuron (DU) in comparison with some other herbicides, alkali, alkaline earth, and heavy metal ions. The presented sensors were successfully applied for the direct determination of isoproturon (IPU) and diuron (DU) in real water samples.

All-Solid-State Calcium Sensors Modified with Polypyrrol (PPY) and Graphene Oxide (GO) as Solid-Contact Ion-to-Electron Transducers

Reliable, cost-effective, and robust screen-printed sensors were constructed and presented for Ca2+ ions determination. The sensors were based on the use of bilirubin (1,3,6,7-tetramethyl-4,5- dicarboxyethy-2,8-divinyl-(b-13)-dihydrobilenone) as a recognition sensory material in plasticized poly (vinyl chloride) (PVC) membranes. Polypyrrol (PPY) and graphene oxide (GO) were used as ion-to-electron transducers, where the effects of anionic excluder, pH, and selectivity were investigated. In a 50 mM tris buffer solution of pH 5, the electrodes offered a potential response for Ca2+ ions with a near-Nernstian slopes of 38.1 ± 0.4 (r2 = 0.996) and 31.1 ± 0.6 (r2 = 0.999), detection limits 3.8 × 10−6 (0.152 μg/mL) and 2.3 × 10−7 M (8.0 ng/mL), and linear concentration ranges of 7.0 × 10−6–1.0 × 10−2 (400–0.28 μg/mL) and 7.0 × 10−7–1.0 × 10−2 M (400–0.028 μg/mL) for sensors based on PPY and GO, respectively. Both sensors revealed stable potentiometric responses with excellent reproducibility and enhanced selectivity over a number of most common metal ions, such as Na+, K+, Li+, NH4+, Fe2+, Mg2+, and Ba2+. Impedance spectroscopy and chronopotentiometric techniques were used for evaluating the potential drift and the interfacial sensor capacitance. The proposed sensors offered the advantages of simple design, ability of miniaturization, good potential stability, and cost-effectiveness. The developed electrodes were applied successfully to Ca2+ ion assessment in different pharmaceutical products, baby-food formulations, and human blood samples. The results obtained were compared with data obtained by atomic absorption spectrometry (AAS).

Screen-Printed Sensor Based on Potentiometric Transduction for Free Bilirubin Detection as a Biomarker for Hyperbilirubinemia Diagnosis

Novel reliable and cost-effective potentiometric screen-printed sensors for free bilirubin (BR) detection were presented. The sensors were fabricated using ordered mesoporous carbon (OMC) as an ion-to-electron transducer. The ion-association complex [Ni(bphen)3]2+[BR]2− was utilized as a sensory recognition material in the plasticized Polyvinyl Chloride (PVC) membrane. The membrane was drop-casted on the OMC layer, which is attached on a carbon conductor (2-mm diameter). In a 50 mM phosphate solution of pH 8.5, the electrodes offered a Nernstian slope of −26.8 ± 1.1 (r2 = 0.9997) mV/decade with a range of linearity 1.0 × 10−6–1 × 10−2 M towards free bilirubin with a detection limit 8.8 × 10−7 M (0.52 µg/mL). The presented sensors offered good features in terms of reliability, ease of design, high potential stability, high specificity and good accuracy and precision. Chronopotentiometric and electrochemical impedance spectrometric measurements were used for short-term potential stability and interfacial capacitance calculations. The sensors were used for the determination of free bilirubin in biological fluids. The data obtained are fairly well consistent with those obtained by the reference spectophotometric method. Based on the interaction of free BR with albumin (1:1), the sensors were also utilized for the assessment of albumin in human serum.

Rapid and Accurate Validated Potentiometric Method for Bispyribac Herbicide Assessment in Rice and Agricultural Wastewater

A new validated method based on potentiometric transduction for bispyribac herbicide assessment in commercial formulations, rice and wastewater samples is fabricated and characterized. Sensors are based in terms of their fabrication on tridodecyl methyl ammonium chloride (TDMAC) as recognition material. TDMAC was plasticized in a poly (vinyl chloride) (PVC) matrix to prepare the membrane. Under static modes of operation, the sensors revealed a Nernstian anionic slope of −63.6 ± 0.7 mV/decade within a linear range of 9.1 × 10−6–1.0 × 10−2 in 50 mM phosphate buffer solution (PBS), pH7. The detection limit was 6.0 × 10−6 M. The sensor was successfully introduced in a flow-stream system revealing a Nernstian response of −53.8 ± 1.3 mV/decade over a linear range of 2 × 10−4–1.0 × 10−2 M and lower detection limit of 5.6 × 10⁻⁵ M. The sampling rate was calculated to be (~42 sample/h). Validation of the assay method is presented in detail including accuracy, trueness, bias, between-day variability and within-day variability, and good performance characteristics of the method are obtained. The presented method was successfully introduced to bispyribac determination in different complex matrices such as commercial bispyribac sodium known as (Nominee-kz, 3% soluble liquid (SL)), rice samples and agricultural wastewater samples. The samples were analyzed successfully under both static and hydrodynamic modes of operation. The results obtained were in a good agreement with those obtained by the liquid chromatographic method.

Validation of a Novel Potentiometric Method Based on a Polymeric PVC Membrane Sensor Integrated with Tailored Receptors for the Antileukemia Drug Cytarabine

A simple, rapid and easy method is proposed for the detection of a cytostatic therapeutic drug, cytarabine, in real samples. The method is based on potentiometric transduction using prepared and characterized new ion-selective electrodes for cytarabine. The electrodes were integrated with novel man-tailored imprinted polymers and used as a sensory element for recognition. The electrodes revealed a remarkable potentiometric response for cytarabine over the linearity range 1.0 × 10⁻⁶–1.0 × 10⁻³ M at pH 2.8–4 with a detection limit of 5.5 × 10⁻⁷ M. The potentiometric response was near-Nernstian, with average slopes of 52.3 ± 1.2 mV/decade. The effect of lipophilic salts and plasticizer types on the potentiometric response was also examined. The electrodes exhibited an enhanced selectivity towards cytarabine over various foreign common ions. Validation and verification of the presented assay method are demonstrated by evaluating the method ruggedness and calculating the detection limit, range of linearity, accuracy (trueness), precision, repeatability (within-day) and reproducibility (between-days). The proposed ion-selective electrodes revealed good performance characteristics and possible application of these electrodes for cytarabine monitoring in different matrices. The electrodes are successfully applied to cytarabine determination in spiked biological fluid samples and in pharmaceutical formulations.

Novel Solid-State Potentiometric Sensors Using Polyaniline (PANI) as A Solid-Contact Transducer for Flucarbazone Herbicide Assessment

Novel potentiometric solid-contact ion-selective electrodes (SC/ISEs) based on molecularly imprinted polymers (MIPs) as sensory carriers (MIP/PANI/ISE) were prepared and characterized as potentiometric sensors for flucarbazone herbicide anion. However, aliquat S 336 was also studied as a charged carrier in the fabrication of Aliquat/PANI/ISEs for flucarbazone monitoring. The polyaniline (PANI) film was inserted between the ion-sensing membrane (ISM) and the electronic conductor glassy carbon substrate (GC). The sensors showed a noticeable response towards flucarbazone anions with slopes of −45.5 ± 1.3 (r² = 0.9998) and −56.3 ± 1.5 (r² = 0.9977) mV/decade over the range of 10⁻²–10⁻⁵, 10⁻²–10⁻⁴ M and detection limits of 5.8 × 10⁻⁶ and 8.5 × 10⁻⁶ M for MIP/PANI/ISE and Aliguat/PANI/ISE, respectively. The selectivity and long-term potential stability of all presented ISEs were investigated. The short-term potential and electrode capacitances were studied and evaluated using chronopotentiometry and electrochemical impedance spectrometry (EIS). The proposed ISEs were introduced for the direct measurement of flucarbazone herbicide in different soil samples sprayed with flucarbazone herbicide. The results agree well with the results obtained using the standard liquid chromatographic method (HPLC).

Potentiometric PVC-Membrane-Based Sensor for Dimethylamine Assessment Using A Molecularly Imprinted Polymer as A Sensory Recognition Element

A new simple potentiometric sensor is developed and presented for sensitive and selective monitoring of dimethylamine (DMA). The sensor incorporates a molecularly imprinted polymer, with a pre-defined specific cavity suitable to accommodate DMA. The molecularly imprinted polymer (MIP) particles were dispersed in an aplasticized poly(vinyl chloride) matrix. The MIP is synthesized by using a template molecule (DMA), a functional monomer (acrylamide, AM), cross-linker (ethylene glycol dimethacrylate, EGDMA) and initiating reagent (benzoylperoxide, BPO). Using Trizma buffer solution (5 mmol L^-1, pH 7.1), the sensor exhibits a rapid, stable and linear response for 1.0 × 10^-5 to 1.0 × 10^-2 mol L^-1 DMA⁺ with a calibration slope of 51.3 ± 0.3 mV decade^-1, and a detection limit of 4.6 × 10^-6 mol L^-1 (0.37 µg mL^-1). The electrode exhibited a short response time (10 s) and stable potential readings (± 0.5 mV) for more than 2 months. Potentiometric selectivity measurements of the sensor reveal negligible interferences from most common aliphatic and aromatic amines. High concentration levels (100-fold excess) of many inorganic cations do not interfere. The sensor is successfully used for quantification of low levels of DMA down to 0.5 µg mL^-1. Verification of the presented method was carried out after measuring the detection limit, working linearity range, ruggedness of the method, accuracy, precision, repeatability and reproducibility. Under flow-through conditions, the proposed sensor in its tubular form is prepared and introduced in a two-channel flow injection setup for hydrodynamic determination of DMA. The sampling rate is 50-55 samples h^-1. The sensor is used to determine DMA in different soil samples with an accuracy range of 97.0-102.8%.

Amr AEG, A. Al-Omar M, H. Kamel A, Khalifa NM. Improved Solid-Contact Nitrate Ion Selective Electrodes Based on Multi-Walled Carbon Nanotubes (MWCNTs) as an Ion-to-Electron Transducer

Possible improvement of the performance characteristics, reliability and selectivity of solid-contact nitrate ion-selective electrodes (ISE) (SC/NO3--ISE) is attained by the application of a nitron-nitrate (Nit+/NO3-) ion association complex and inserting multi-walled carbon nanotubes (MWCNTs) as an ion-to-electron transducer between the ion sensing membrane (ISM) and the electronic conductor glassy carbon (GC) substrate. The potentiometric performance of the proposed electrode revealed a Nernstian slope -55.1 ± 2.1 (r² = 0.997) mV/decade in the range from 8.0 × 10-8-1 × 10-2 M with a detection limit of 2.8 × 10-8 (1.7 ng/mL). Selectivity, repeatability and reproducibility of the proposed sensors were considerably improved as compared to the coated disc electrode (GC/NO3--ISE) without insertion of a MWCNT layer. Short-term potential stability and capacitance of the proposed sensors were tested using a current-reversal chronopotentiometric technique. The potential drift in presence of a MWCNT layer decreased from 167 μVs-1 (i.e., in absence of MWCNTs) to 16.6 μVs-1. In addition, the capacitance was enhanced from 5.99 μF (in absence of MWCNTs) to 60.3 μF (in the presence of MWCNTs). The presented electrodes were successfully applied for nitrate determination in real samples with good accuracy.

Single-Walled Carbon Nanotubes (SWCNTs) as Solid-Contact in All-Solid-State Perchlorate ISEs: Applications to Fireworks and Propellants Analysis

Herein, we present reliable, robust, stable, and cost-effective solid-contact ion-selective electrodes (ISEs) for perchlorate determination. Single-walled carbon nanotubes (SWCNTs) were used as solid-contact material and indium (III) 5, 10, 15, 20-(tetraphenyl) porphyrin chloride (In^III-porph) as an ion carrier. The sensor exhibited an improved sensitivity towards ClO₄⁻ ions with anionic slope of −56.0 ± 1.1 (R² = 0.9998) mV/decade over a linear range 1.07 × 10⁻⁶ – 1.0 × 10⁻² M and detection limit of 1.8 × 10⁻⁷ M. The short-term potential stability and the double-layer capacitance were measured by chronopotentiometric and electrochemical impedance spectroscopy (EIS) measurements, respectively. The sensor is used for ClO₄⁻ determination in fireworks and propellant powders. The results fairly agree with data obtained by ion chromatography.

Novel Potentiometric 2,6-Dichlorophenolindo-phenolate (DCPIP) Membrane-Based Sensors: Assessment of Their Input in the Determination of Total Phenolics and Ascorbic Acid in Beverages

In this work, we demonstrated proof-of-concept for the use of ion-selective electrodes (ISEs) as a promising tool for the assessment of total antioxidant capacity (TAC). Novel membrane sensors for 2,6-dichlorophenolindophenolate (DCPIP) ions were prepared and characterized. The sensors membranes were based on the use of either Cu^II-neocuproin/2,6-dichlorophenolindo-phenolate ([Cu(Neocup)₂][DCPIP]₂) (sensor I), or methylene blue/2,6-dichlorophenolindophenolate (MB/DCPIP) (sensor II) ion association complexes in a plasticized PVC matrix. The sensors revealed significantly enhanced response towards DCPIP ions over the concentration range 5.13 × 10⁻⁵–1.0 × 10⁻² and 5.15 × 10⁻⁵–1.0 × 10⁻² M at pH 7 with detection limits of 6.3 and 9.2 µg/mL with near-Nernstian slope of −56.2 ± 1.7 and −51.6 ± 2 mV/decade for sensors I and II, respectively. The effects of plasticizers and various foreign common ions were also tested. The sensors showed enhanced selectivity towards DCPIP over many other phenolic and inorganic ions. Long life span, high potential stability, high reproducibility, and fast response were also observed. Method validation was also verified by measuring the detection limit, linearity range, accuracy, precision, repeatability and between-day-variability. The sensors were introduced for direct determination of TAC in fresh and canned juice samples collected from local markets. The obtained results agreed fairly well with the data obtained by the standard method.

Novel Carbon/PEDOT/PSS-Based Screen-Printed Biosensors for Acetylcholine Neurotransmitter and Acetylcholinesterase Detection in Human Serum

New reliable and robust potentiometric ion-selective electrodes were fabricated using poly(3,4-ethylenedioxythiophene)/poly(styrenesulfonate) (PEDOT/PSS) as the solid contact between the sensing membrane and electrical substrate for an acetylcholine (ACh) bioassay. A film of PEDOT/PSS was deposited on a solid carbon screen-printed platform made from ceramic substrate. The selective materials used in the ion-selective electrode (ISE) sensor membrane were acetylcholinium tetraphenylborate (ACh/TPB/PEDOT/PSS-ISE) (sensor I) and triacetyl-β-cyclodextrin (β-CD/PEDOT/PSS-ISE) (sensor II). The sensors revealed clear enhanced Nernstian response with a cationic slope 56.4 ± 0.6 and 55.3 ± 1.1 mV/decade toward (ACh⁺) ions over the dynamic linear range 1.0 × 10⁻⁶–1 × 10⁻³ and 2.0 × 10⁻⁶–1.0 × 10⁻³ M at pH 5 with limits of detection 2.0 × 10⁻⁷ and 3.2 × 10⁻⁷ M for sensors I and II, respectively. The selectivity behavior of both sensors was also tested and the sensors showed a significant high selectivity toward ACh⁺ over different common organic and inorganic cations. The stability of the potential response for the solid-contact (SC)/ISEs was evaluated using a chronopotentiometric method and compared with that of electrodes prepared without adding the solid-contact material (PEDOT/PSS). Enhanced accuracy, excellent repeatability, good reproducibility, potential stability, and high selectivity and sensitivity were introduced by these cost-effective sensors. The sensors were also used to measure the activity of acetylcholinesterase (AChE). A linear plot between the initial rate of the hydrolysis of ACh⁺ substrate and enzyme activity held 5.0 × 10⁻³–5.2 IU L⁻¹ of AChE enzyme. Application to acetylcholine determination in human serum was done and the results were compared with the standard colorimetric method.

Biosensing methods for determination of creatinine: A review

Creatinine is a metabolic product of creatine phosphate in muscles, which provides energy to muscle tissues. Creatinine has been considered as indicator of renal function specifically after dialysis, thyroid malfunction and muscle damage. The normal level of creatinine in the serum and its excretion through urine in apparently healthy individuals is 45-140 μM and 0.8-2.0 gm/day respectively. The level of creatinine reaches >1000 μM in serum during renal, thyroid and kidney dysfunction or muscle disorder. A number of conventional methods such as colorimetric, spectrophotometric and chromatographic are available for determination of creatinine. Besides the advantages of being highly sensitive and selective, these methods have some drawbacks like time-consuming, requirement of sample pre-treatment, high cost instrumental set-up and skilled persons to operate. The sensors/biosensors overcome these drawbacks, as these are fast, easy, cost effective and highly sensitive. This review article describes the classification, operating principles, merits and demerits of various creatinine sensors/biosensors, specifically nanomaterials based biosensors. Creatinine biosensors work optimally within 2-900 s, potential range 0.1-1.0 V, pH range 4.0-10.0, temperature range 25-35 °C and had linear range, 0.004-30000 µM for creatinine with the detection limit between 0.01.01 µM and 520 µM. These biosensors measured creatinine level in sera and urine samples and had storage stability between 4 and 390 days, while being stored dry at 4 °C. The future perspective for further improvement and commercialization of creatinine biosensors are discussed.

Michael Addition Based Chemodosimeter for Serum Creatinine Detection Using ( E)-3-(Pyren-2-yl)-1-(3,4,5-trimethoxyphenyl)prop-2-en-1-one Chalcone

First, a simple and highly emissive fluorescent chalcone ( E)-3-(pyren-2-yl)-1-(3,4,5-trimethoxyphenyl)prop-2-en-1-one (PTP) was synthesized via simple shaking along with an excellent quantum yield of 0.85, and proved as a stable, highly sensitive, and selective biosensor for creatinine. Owing to its unique photophysical interaction with creatinine through Michael adduct formation, PTP was utilized as a Chemodosimeter for the selective recognition of creatinine in blood serum. Under optimized conditions, a broad range of creatinine detection was achieved  from 0.00000113 mg/dL to 15.8 mg/dL along with an excellent limit of detection of 0.00000065 mg/dL (0.058 nM). This biosensor is highly reproducible even for different concentration levels of creatinine. It is the very first creatinine biosensor possessing a wider linear range for clinical applications for creatinine. To ensure its clinical application, blood serum samples of people of different age groups were collected from Alpha Hospital and analyzed for creatinine by using our chemodosimeter method and compared with data obtained using a commercial method in the Alpha hospital. Our data show very good agreement with clinical data. Because clinical protocol involves trienzymes and tedious sample preparation, no doubt, our chemodosimeter will be a cheap and sensitive option compared to the existing clinical methods.

Accurate quantification of creatinine in serum by coupling a measurement standard to extractive electrospray ionization mass spectrometry

Ambient ionization (AI) techniques have been widely used in chemistry, medicine, material science, environmental science, forensic science. AI takes advantage of direct desorption/ionization of chemicals in raw samples under ambient environmental conditions with minimal or no sample preparation. However, its quantitative accuracy is restricted by matrix effects during the ionization process. To improve the quantitative accuracy of AI, a matrix reference material, which is a particular form of measurement standard, was coupled to an AI technique in this study. Consequently the analyte concentration in a complex matrix can be easily quantified with high accuracy. As a demonstration, this novel method was applied for the accurate quantification of creatinine in serum by using extractive electrospray ionization (EESI) mass spectrometry. Over the concentration range investigated (0.166 ~ 1.617 μg/mL), a calibration curve was obtained with a satisfactory linearity (R² = 0.994), and acceptable relative standard deviations (RSD) of 4.6 ~ 8.0% (n = 6). Finally, the creatinine concentration value of a serum sample was determined to be 36.18 ± 1.08 μg/mL, which is in excellent agreement with the certified value of 35.16 ± 0.39 μg/mL.

Conventional and planar chip sensors for potentiometric assay of uric acid in biological fluids using flow injection analysis

The potentiometric response properties of several PVC-based membrane sensors using phthalocyanine complexes of cobalt(II) (CoPC) and Fe(II) (FePC) as anion carriers, towards uric acid were constructed and characterized. The sensors demonstrated fast near-Nernstian response for uric acid over the concentration ranges 9.1 x 10(-6) to 9.1 x 10(-2) and 3.1 x 10(-5) to 3.1 x 10(-2)M with detection limits 0.67 and 2.85 microg mL(-1) over pH 6.5-8 for CoPC and FePC based membrane sensors plasticized with o-NPOE and 1% TDMAC, respectively. A novel solid-state planar chip urate sensor was developed, characterized according to IUPAC recommendations, easily used in a single channel wall-jet flow injection system and compared with a tubular detector. The intrinsic characteristics of the detectors in a low dispersion manifold were determined and compared with data obtained under hydrodynamic mode of operation. Validation of the assay methods with the proposed sensors by measuring the lower limit, range, accuracy, precision, repeatability and between-day-variability revealed good performance characteristics confirming applicability for continuous determination of uric acid. The sensors were used for determining urate in biological fluids at an input rate of 50 samples per hour. The results compare favorably with data obtained by the standard spectrophotometry.