Characterization and Use of Copper Solid Amalgam Electrode for Electroanalytical Determination of Triazines-Based Herbicides

New Approaches in Electroanalytical Determination of Triazines-Based Pesticides in Natural Waters

This study describes the preparation and use of a dental amalgam electrode for the voltammetric determination of triazine-based pesticides ametryn, atrazine, and simazine in natural waters, using square wave voltammetry. The experimental and voltammetric parameters were previously optimized, and analytical curves were constructed to calculate analytical parameters. The detection limits presented values that were lower than the maximum limits of residues permitted in natural water by the Brazilian Environmental Agency, 100 µg L−1 (100 ppb), and around the values obtained using other electrodic surfaces or high-performance liquid chromatography, traditionally used in triazine levels determination. Furthermore, the recovery percentages in pure electrolyte and natural waters were around 100%, demonstrating that the methodology proposed is suitable for determining triazines contamination in natural water samples, based on an environmentally friendly procedure.

Simultaneous voltammetric determination of four triazine herbicides in water samples with the aid of chemometrics

A novel differential pulse voltammetry (DPV) method was developed for the simultaneous analysis of herbicides in water. A mixture of four herbicides, atrazine, simazine, propazine and terbuthylazine was analyzed simultaneously and the complex, overlapping DPV voltammograms were resolved by several chemometrics methods such as partial least squares (PLS), principal component regression (PCR) and principal component-artificial networks (PC-ANN). The complex profiles of the voltammograms collected from a synthetic set of samples were best resolved with the use of the PC-ANN method, and the best predictions of the concentrations of the analytes were obtained with the PC-ANN model (%RPET = 6.1 and average %Recovery = 99.0). The new method was also used for analysis of real samples, and the obtained results were compared well with those from the GC-MS technique. Such conclusions suggest that the novel method is a viable alternative to the other commonly used methods such as GC, HPLC and GC-MS.

A lower limit of detection for atrazine was obtained using bioluminescent reporter bacteria via a lower incubation temperature

The present article reports on the influence of various atrazine concentrations to the response of genetically modified Escherichia coli TV1061 bacterial cells while modulating the experimental conditions. Interesting increases of bioluminescence signals are recorded for E. coli TV1061 bacteria in the presence of 10 μg/mL atrazine concentration named "high-toxicity bacteria alert" when compared with 1 μg/mL -10 fg/mL atrazine termed "low-toxicity bacteria alert". Detecting the effect of atrazine via its effect on bioluminescence of bacteria has been carried out by two consecutive measurements (fresh and overnight modes) at different concentrations of analyte. We have shown that a more precise discrimination at lower-toxicity concentrations can be obtained through overnight incubation of bacteria with the analyte at 4 °C. In addition, centrifugation of bacterial cells and analyte dilutions has been performed in order to ensure a better interaction between the insoluble atrazine pesticide and the bacterial cells.

Determination of triazine herbicides: development of an electroanalytical method utilizing a solid amalgam electrode that minimizes toxic waste residues, and a comparative study between voltammetric and chromatographic techniques

The use of a copper solid amalgam electrode (CuSAE) for the analytical determination of triazine herbicides (atrazine and ametryne) instead of the conventional hanging mercury drop electrode (HMDE) is reported. The results obtained using electroanalytical methods utilizing each of these electrodes were also compared with those provided by the HPLC technique. The results indicated that the CuSAE electrode can be used to detect the herbicides studied, since the detection limits reached using the electrode (3.06 microg L-1 and 3.78 microg L-1 for atrazine and ametryne, respectively) are lower than the maximum values permitted by CONAMA (Brazilian National Council for the Environment) for wastewaters (50 microg L-1) and by the US EPA (Environmental Protection Agency of the United States) in natural water samples (10.00 microg L-1). An electroanalytical methodology employing CuSAE and square wave voltammetry (SWV) was successfully applied to the determination of atrazine and ametryne in natural water samples, yielding good recoveries (70.30%-79.40%). This indicates that the CuSAE provides a convenient substitute for the HMDE, particularly since the CuSAE minimizes the toxic waste residues produced by the use of mercury in HDME-based analyses.