Design of Amperometric Biosensors and Biofuel Cells by the Reconstitution of Electrically Contacted Enzyme Electrodes

Recent Advances in Enzymatic and Non-Enzymatic Electrochemical Glucose Sensing

The detection of glucose is crucial in the management of diabetes and other medical conditions but also crucial in a wide range of industries such as food and beverages. The development of glucose sensors in the past century has allowed diabetic patients to effectively manage their disease and has saved lives. First-generation glucose sensors have considerable limitations in sensitivity and selectivity which has spurred the development of more advanced approaches for both the medical and industrial sectors. The wide range of application areas has resulted in a range of materials and fabrication techniques to produce novel glucose sensors that have higher sensitivity and selectivity, lower cost, and are simpler to use. A major focus has been on the development of enzymatic electrochemical sensors, typically using glucose oxidase. However, non-enzymatic approaches using direct electrochemistry of glucose on noble metals are now a viable approach in glucose biosensor design. This review discusses the mechanisms of electrochemical glucose sensing with a focus on the different generations of enzymatic-based sensors, their recent advances, and provides an overview of the next generation of non-enzymatic sensors. Advancements in manufacturing techniques and materials are key in propelling the field of glucose sensing, however, significant limitations remain which are highlighted in this review and requires addressing to obtain a more stable, sensitive, selective, cost efficient, and real-time glucose sensor.

Fully edible biofuel cells

This article describes the first example of edible energy harvesting biofuel cells, based solely on highly biocompatible and ingestible food materials.

Immobilization of 2-Deoxy-d-ribose-5-phosphate Aldolase in Polymeric Thin Films via the Langmuir-Schaefer Technique

A synthetic protocol for the fabrication of ultrathin polymeric films containing the enzyme 2-deoxy-d-ribose-5-phosphate aldolase from Escherichia coli (DERA_EC) is presented. Ultrathin enzymatically active films are useful for applications in which only small quantities of active material are needed and at the same time quick response and contact times without diffusion limitation are wanted. We show how DERA as an exemplary enzyme can be immobilized in a thin polymer layer at the air-water interface and transferred to a suitable support by the Langmuir-Schaefer technique under full conservation of enzymatic activity. The polymer in use is a poly(N-isopropylacrylamide-co-N-2-thiolactone acrylamide) (P(NIPAAm-co-TlaAm)) statistical copolymer in which the thiolactone units serve a multitude of purposes including hydrophobization of the polymer, covalent binding of the enzyme and the support and finally cross-linking of the polymer matrix. The application of this type of polymer keeps the whole approach simple as additional cocomponents such as cross-linkers are avoided.

Solvent Effects on the Structure-Property Relationship of Redox-Active Self-Assembled Nanoparticle-Polyelectrolyte-Surfactant Composite Thin Films: Implications for the Generation of Bioelectrocatalytic Signals in Enzyme-Containing Assemblies

The search for strategies to improve the performance of bioelectrochemical platforms based on supramolecular materials has received increasing attention within the materials science community, where the main objective is to develop low-cost and flexible routes using self-assembly as a key enabling process. Important contributions to the performance of such bioelectrochemical devices have been made based on the integration and supramolecular organization of redox-active polyelectrolyte-surfactant complexes on electrode supports. Here, we examine the influence of the processing solvent on the interplay between the supramolecular mesoorganization and the bioelectrochemical properties of redox-active self-assembled nanoparticle-polyelectrolyte-surfactant nanocomposite thin films. Our studies reveal that the solvent used in processing the supramolecular films and the presence of metal nanoparticles not only have a substantial influence in determining the mesoscale organization and morphological characteristics of the film but also have a strong influence on the efficiency and performance of the bioelectrochemical system. In particular, a higher bioelectrochemical response is observed when nanocomposite supramolecular films were cast from aqueous solutions. These observations seem to be associated with the fact that the use of aqueous solvents increases the hydrophilicity of the film, thus favoring the access of glucose, particularly at low concentrations. We believe that these results improve our current understanding of supramolecular nanocomposite materials generated via polyelectrolyte-surfactant complexes, in order to use the processing conditions as a variable to improve the performance of bioelectrochemical devices.

Amphiphilic Polymer Mediators Promoting Electron Transfer on Bioanodes with PQQ-Dependent Glucose Dehydrogenase

Redox-active phenazinium salts bonded to amphiphilic polymer backbones are demonstrated to function as high-performance electron-transfer mediators in enzymatic bioanodes applicable to biofuel cells. The redox-active moieties could be easily tethered to the electrodes by physical adsorption of the hydrophobic regions of the polymer backbones onto the electrode surface. On the other hand, long hydrophilic chains were essential to ensure high mobility of the redox-active moieties in aqueous solutions and to enhance their electron-transfer properties. We found that an amphiphilic mediator with a linear polymer backbone exhibited stable adsorption behavior on the electrode surface and generated high bioelectrocatalytic current (>1.8 ± 0.32 mA/cm²) in the presence of pyrroloquinoline quinone-dependent glucose dehydrogenase and an aqueous solution of glucose fuel. This current was more than two times higher than that of an electrode treated with a low-molecular-weight phenazinium salt. Moreover, the bioelectrode modified with the polymer mediator retained the high electrocatalytic current after 10 exchanges of the glucose fuel. The mediator-modified bioelectrodes are expected to be useful for various bio-related energy and electronic devices.

Design of Redox-Active Peptides: Towards Functional Materials

In nature, the majority of processes that occur in the cell involve the cycling of electrons and protons, changing the reduction and oxidation state of substrates to alter their chemical reactivity and usefulness in vivo. One of the most relevant examples of these processes is the electron transport chain, a series of oxidoreductase proteins that shuttle electrons through well-defined pathways, concurrently moving protons across the cell membrane. Inspired by these processes, researchers have sought to develop materials to mimic natural systems for a number of applications, including fuel production. The most common cofactors found in proteins to carry out electron transfer are iron sulfur clusters and porphyrin-like molecules. Both types have been studied within natural proteins, such as in photosynthetic machinery or soluble electron carriers; in parallel, an extensive literature has developed over recent years attempting to model and study these cofactors within peptide-based materials. This chapter will focus on major designs that have significantly advanced the field.

Gold-Coated M13 Bacteriophage as a Template for Glucose Oxidase Biofuel Cells with Direct Electron Transfer

Glucose oxidase-based biofuel cells are a promising source of alternative energy for small device applications, but still face the challenge of achieving robust electrical contact between the redox enzymes and the current collector. This paper reports on the design of an electrode consisting of glucose oxidase covalently attached to gold nanoparticles that are assembled onto a genetically engineered M13 bacteriophage using EDC-NHS chemistry. The engineered phage is modified at the pIII protein to attach onto a gold substrate and serves as a high-surface-area template. The resulting "nanomesh" architecture exhibits direct electron transfer (DET) and achieves a higher peak current per unit area of 1.2 mA/cm(2) compared to most other DET attachment schemes. The final enzyme surface coverage on the electrode was calculated to be approximately 4.74 × 10(-8) mol/cm(2), which is a significant improvement over most current glucose oxidase (GOx) DET attachment methods.

Recent advances on developing 3rd generation enzyme electrode for biosensor applications

The electrochemical biosensor with enzyme as biorecognition element is traditionally pursued as an attractive research topic owing to their high commercial perspective in healthcare and environmental sectors. The research interest on the subject is sharply increased since the beginning of 21st century primarily, due to the concomitant increase in knowledge in the field of material science. The remarkable effects of many advance materials such as, conductive polymers and nanomaterials, were acknowledged in the developing efficient 3rd generation enzyme bioelectrodes which offer superior selectivity, sensitivity, reagent less detection, and label free fabrication of biosensors. The present review article compiles the major knowledge surfaced on the subject since its inception incorporating the key review and experimental papers published during the last decade which extensively cover the development on the redox enzyme based 3rd generation electrochemical biosensors. The tenet involved in the function of these direct electrochemistry based enzyme electrodes, their characterizations and various strategies reported so far for their development such as, nanofabrication, polymer based and reconstitution approaches are elucidated. In addition, the possible challenges and the future prospects in the development of efficient biosensors following this direct electrochemistry based principle are discussed. A comparative account on the design strategies and critical performance factors involved in the 3rd generation biosensors among some selected prominent works published on the subject during last decade have also been included in a tabular form for ready reference to the readers.

Graphene based enzymatic bioelectrodes and biofuel cells

The excellent electrical conductivity and ease of functionalization make graphene a promising material for use in enzymatic bioelectrodes and biofuel cells. Enzyme based biofuel cells have attracted substantial interest due to their potential to harvest energy from organic materials. This review provides an overview of the functional properties and applications of graphene in the construction of biofuel cells as alternative power sources. The review covers the current state-of-the-art research in graphene based nanomaterials (physicochemical properties and surface functionalities), the role of these parameters in enhancing electron transfer, the stability and activity of immobilized enzymes, and how enhanced power density can be achieved. Specific examples of enzyme immobilization methods, enzyme loading, stability and function on graphene, functionalized graphene and graphene based nanocomposite materials are discussed along with their advantages and limitations. Finally, a critical evaluation of the performance of graphene based enzymatic biofuel cells, the current status, challenges and future research needs are provided.

Recent advances in carbon nanotube-based enzymatic fuel cells

This review summarizes recent trends in the field of enzymatic fuel cells. Thanks to the high specificity of enzymes, biofuel cells can generate electrical energy by oxidation of a targeted fuel (sugars, alcohols, or hydrogen) at the anode and reduction of oxidants (O2, H2O2) at the cathode in complex media. The combination of carbon nanotubes (CNT), enzymes and redox mediators was widely exploited to develop biofuel cells since the electrons involved in the bio-electrocatalytic processes can be efficiently transferred from or to an external circuit. Original approaches to construct electron transfer based CNT-bioelectrodes and impressive biofuel cell performances are reported as well as biomedical applications.

3D-electrode architectures for enhanced direct bioelectrocatalysis of pyrroloquinoline quinone-dependent glucose dehydrogenase

We report on the fabrication of a complex electrode architecture for efficient direct bioelectrocatalysis. In the developed procedure, the redox enzyme pyrroloquinoline quinone-dependent glucose dehydrogenase entrapped in a sulfonated polyaniline [poly(2-methoxyaniline-5-sulfonic acid)-co-aniline] was immobilized on macroporous indium tin oxide (macroITO) electrodes. The use of the 3D-conducting scaffold with a large surface area in combination with the conductive polymer enables immobilization of large amounts of enzyme and its efficient communication with the electrode, leading to enhanced direct bioelectrocatalysis. In the presence of glucose, the fabricated bioelectrodes show an exceptionally high direct bioelectrocatalytical response without any additional mediator. The catalytic current is increased more than 200-fold compared to planar ITO electrodes. Together with a high long-term stability (the current response is maintained for >90% of the initial value even after 2 weeks of storage), the transparent 3D macroITO structure with a conductive polymer represents a valuable basis for the construction of highly efficient bioelectronic units, which are useful as indicators for processes liberating glucose and allowing optical and electrochemical transduction.

A multilayered sulfonated polyaniline network with entrapped pyrroloquinoline quinone-dependent glucose dehydrogenase: tunable direct bioelectrocatalysis

Differently sulfonated polyaniline copolymers have been utilized as matrices for the entrapment of PQQ-GDH, resulting in a direct bioelectrocatalytic response together with a colour change upon addition of the substrate.

Enzyme-capped relay-functionalized mesoporous carbon nanoparticles: effective bioelectrocatalytic matrices for sensing and biofuel cell applications

The porous high surface area and conducting properties of mesoporous carbon nanoparticles, CNPs (<500 nm diameter of NPs, pore dimensions ∼6.3 nm), are implemented to design electrically contacted enzyme electrodes for biosensing and biofuel cell applications. The relay units ferrocene methanol, Fc-MeOH, methylene blue, MB(+), and 2,2'-azinobis(3-ethylbenzothiazoline-6-sulfonic acid), ABTS(2-), are loaded in the pores of the mesoporous CNPs, and the pores are capped with glucose oxidase, GOx, horseradish peroxidase, HRP, or bilirubin oxidase, BOD, respectively. The resulting relay/enzyme-functionalized CNPs are immobilized on glassy carbon electrodes, and the relays encapsulated in the pores are sufficiently free to electrically contact the different enzymes with the bulk electrode supports. The Fc-MeOH/GOx CNP-functionalized electrode is implemented for the bioelectrocatalyzed sensing of glucose, and the MB(+)/HRP-modified CNPs are applied for the electrochemical sensing of H2O2. The ABTS(2-)/BOD-modified CNPs provide an effective electrically contacted material for the bioelectrocatalyzed reduction of O2 (kcat = 94 electrons·s(-1)). Integration of the Fc-MeOH/GOx CNP electrode and of the electrically wired ABTS(2-)/BOD CNP electrode as anode and cathode, respectively, yields a biofuel cell revealing a power output of ∼95 μW·cm(-2).

Rapid electrochemical screening of NAD-dependent dehydrogenases in a 96-well format

The electrochemical detection of dehydrogenase activity in crude cell lysates is performed simultaneously using 96 carbon electrodes modified with electrografted phenazines. The method is applied to the screening of a library of formate dehydrogenase mutants obtained by directed evolution.

Preparation of liposome-coupled NADH and evaluation of its affinity toward formate dehydrogenase based on deactivation kinetics of the enzyme

β-Reduced nicotinamide adenine dinucleotide (NADH) has been immobilized onto the surface of liposome containing 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE). Amino groups of NADH were coupled to POPE via glutaraldehyde (GA) or poly(ethylene glycol) dialdehyde (PEG-ALD2). Formate dehydrogenase from Candida boidinii (CbFDH) was anchored on NADH through bioaffinity, where 5 NADH molecules on the liposome were associated with one CbFDH molecule. We evaluated the affinity between CbFDH and NADH present in various conditions based on of the first-order deactivation constant k(d) of the enzyme at 60°C. The kd value observed with the liposome-coupled NADH was apparently smaller than that with liposome alone, indicating the thermostability of the NADH-CbFDH complex on the liposome surface. On the other hand, free NADH showed the strongest affinity toward CbFDH. This can be recognized by considering that the affinity between CbFDH and liposome-coupled NADH is relatively weakened by the formation of chemical linkage between them. PEG-ALD2 provided a smaller k(d) value than GA. This bulkier PEG-ALD2 may cause a similar situation to NADH alone by shielding the effect of liposomes.

A 96-well electrochemical method for the screening of enzymatic activities

The rapid electrochemical screening of enzyme activities in bioelectronics is still a challenging issue. In order to solve this problem, we propose to use a 96-well electrochemical assay. This system is composed of 96 screen-printed electrodes on a printed circuit board adapted from a commercial system (carbon is used as the working electrode and silver chloride as the counter/reference electrode). The associated device allows for the measurements on the 96 electrodes to be performed within a few seconds. In this work, we demonstrate the validity of the screening method with the commercial laccase from the fungus Trametes versicolor. The signal-to-noise ratio (S/N) is found to be the best way to analyze the electrochemical signals. The S/N follows a saturation-like mechanism with a dynamic linear range of two decades ranging from 0.5 to 75 ng of laccase (corresponding to enzymatic activities from 62 × 10(-6) to 9.37 × 10(-3) μmol min(-1)) and a sensitivity of 3027 μg(-1) at +100 mV versus Ag/AgCl. Laccase inhibitors (azide and fluoride anions), pH optima, and interfering molecules could also be identified within a few minutes.

Integration of photoswitchable proteins, photosynthetic reaction centers and semiconductor/biomolecule hybrids with electrode supports for optobioelectronic applications

Light-triggered biological processes provide the principles for the development of man-made optobioelectronic systems. This Review addresses three recently developed topics in the area of optobioelectronics, while addressing the potential applications of these systems. The topics discussed include: (i) the reversible photoswitching of the bioelectrocatalytic functions of redox proteins by the modification of proteins with photoisomerizable units or by the integration of proteins with photoisomerizable environments; (ii) the integration of natural photosynthetic reaction centers with electrodes and the construction of photobioelectrochemical cells and photobiofuel cells; and (iii) the synthesis of biomolecule/semiconductor quantum dots hybrid systems and their immobilization on electrodes to yield photobioelectrochemical and photobiofuel cell elements. The fundamental challenge in the tailoring of optobioelectronic systems is the development of means to electrically contact photoactive biomolecular assemblies with the electrode supports. Different methods to establish electrical communication between the photoactive biomolecular assemblies and electrodes are discussed. These include the nanoscale engineering of the biomolecular nanostructures on surfaces, the development of photoactive molecular wires and the coupling of photoinduced electron transfer reactions with the redox functions of proteins. The different possible applications of optobioelectronic systems are discussed, including their use as photosensors, the design of biosensors, and the construction of solar energy conversion and storage systems.

Influence of surface adsorption on the interfacial electron transfer of flavin adenine dinucleotide and glucose oxidase at carbon nanotube and nitrogen-doped carbon nanotube electrodes

The adsorption of flavin adenine dinucleotide (FAD) and glucose oxidase (GOx) onto carbon nanotube (CNT) and nitrogen-doped CNT (N-CNT) electrodes was investigated and found to obey Langmuir adsorption isotherm characteristics. The amount adsorbed and adsorption maximum are dependent on exposure time, the concentration of adsorbate, and the ionic strength of the solution. The formal potentials measured for FAD and GOx are identical, indicating that the observed electroactivity is from FAD, the redox reaction center of GOx. When glucose is added to GOx adsorbed onto CNT/N-CNT electrodes, direct electron transfer (DET) from enzyme-active FAD is not observed. However, efficient mediated electron transfer (MET) occurs if an appropriate electron mediator is placed in solution, or the natural electron mediator oxygen is used, indicating that GOx is adsorbed and active on CNT/N-CNT electrodes. The observed surface-confined redox reaction at both CNT and N-CNT electrodes is from FAD that either specifically adsorbs from solution or adsorbs from the holoprotein subsequently inactivating the enzyme. The splitting of cathodic and anodic peak potentials as a function of scan rate provides a way to measure the heterogeneous electron-transfer rate constant (k(s)) using Laviron's method. However, the measured k(s) was found to be under ohmic control, not under the kinetic control of an electron-transfer reaction, suggesting that k(s) for FAD on CNTs is faster than the measured value of 7.6 s(-1).