Nitrophenols in the environment: An update on pretreatment and analysis techniques since 2017

Nitrophenols, a versatile intermediate, have been widely used in leather, medicine, chemical synthesis, and other fields. Because these components are widely applied, they can enter the environment through various routes, leading to many hazards and toxicities. There has been a recent surge in the development of simple, rapid, environmentally friendly, and effective techniques for determining these environmental pollutants. This review provides a comprehensive overview of the latest research progress on the pretreatment and analysis methods of nitrophenols since 2017, with a focus on environmental samples. Pretreatment methods include liquid-liquid extraction, solid-phase extraction, dispersive extraction, and microextraction methods. Analysis methods mainly include liquid chromatography-based methods, gas chromatography-based methods, supercritical fluid chromatography. In addition, this review also discusses and compares the advantages/disadvantages and development prospects of different pretreatment and analysis methods to provide a reference for further research.

Reduced Graphene Oxide as a Platform for the Immobilization of Amino-Cyclodextrins

In the present work, we reported on a method to combine amino β-cyclodextrins (CD1) with reduced graphene oxide (obtained by the electrochemical reduction of graphene oxide, erGO) to produce a glassy carbon electrode (GCE) modified with both CD1 and erGO (CD1-erGO/GCE). This procedure avoids the use of organic solvents such as hydrazine or long reaction times and high temperatures. The material combining both CD1 and erGO (CD1-erGO/GCE) was characterized by SEM, ATR-FTIR, Raman, XPS, and electrochemical techniques. As proof-of-concept, the determination of the pesticide carbendazim was carried out. The spectroscopic measurements, especially XPS, proved that CD1 was covalently attached to the surface of the erGO/GCE electrode. The attachment of cyclodextrin at the reduced graphene oxide produced an increase in the electrochemical behavior of the electrode. The cyclodextrin-functionalized reduced graphene oxide, CD1-erGO/GCE, showed a larger sensitivity (1.01 μA/μM) and a lower limit of detection for carbendazim (LOD = 0.50 μM) compared with the non-functionalized material, erGO/GCE, (sensitivity = 0.63 μA/μM and LOD = 4.32 μM, respectively). Overall, the results of the present work show that this simple method is suitable to attach cyclodextrins to graphene oxide, maintaining their inclusion abilities.

Decoration of alkalization-intercalated Ti3C2 with ZIF-8@ZIF-67-derived N-doped carbon nanocage for detecting 4-nitrophenol

The highly effective alk-Ti₃C₂/bimetallic Co, Zn embedded N-doped carbon (Co-Zn-NC) composite was fabricated by a convenient self-assembled method strategy and applied to  the reduction of 4-nitrophenol(4-NP). Co-Zn-NC nanocage was synthesized by using designed core-shell ZIF-8@ZIF-67 as sacrificial template. The Co-Zn-NC was prepared by pyrolysis of ZIF-8@ZIF-67 at 900 °C with high-specific surface area and hollow structure, which facilitates the dispersion of Co species and produces abundant Co-Nx active sites. In addition, the electrochemical property and specific surface area of Ti₃C₂ were improved by alkaline treatment. As a result, compared with alk-Ti₃C₂ and Co-Zn-NC, the alk-Ti₃C₂/Co-Zn-NC sensor showed higher activity and stability in detecting 4-NP. The alk-Ti₃C₂/Co-Zn-NC sensor has a wide determination range of 2-500 μM and a low detection limit of 0.23 μM for 4-NP. In addition, the newly developed alk-Ti₃C₂/Co-Zn-NC sensor displayed satisfactory reproducibility and  good stability in detecting 4-NP in aqueous samples.

A Review on CNTs-Based Electrochemical Sensors and Biosensors: Unique Properties and Potential Applications

Carbon nanotubes (CNTs), are safe, biocompatible, bioactive, and biodegradable materials, and have sparked a lot of attention due to their unique characteristics in a variety of applications, including medical and dye industries, paper manufacturing and water purification. CNTs also have a strong film-forming potential, permitting them to be widely employed in constructing sensors and biosensors. This review concentrates on the application of CNT-based nanocomposites in the production of electrochemical sensors and biosensors. It emphasizes the synthesis and optimization of CNT-based sensors for a range of applications and outlines the benefits of using CNTs for biomolecule immobilization. In addition, the use of molecularly imprinted polymer (MIP)-CNTs in the production of electrochemical sensors is also discussed. The challenges faced by the current CNTs-based sensors, along with some the future perspectives and their future opportunities, are also briefly explained in this paper.

Ionic Liquid Functionalized Metal-Organic Framework ([DEIm][PF6]@MOF-5): Synthesis, Characterization, and Catalytic Application in the Reduction of 4-Nitrophenol

A novel, unique, highly effective, and recyclable heterogeneous catalyst, diethyl imidazolium hexafluorophosphate ionic liquid supported metal-organic framework ([DEIm][PF₆]@MOF-5), has been synthesized using a simple impregnation method at ambient temperature. Characterization of the catalyst was done through various techniques such as Fourier transform infrared (FTIR), energy dispersive X-ray, X-ray diffraction (XRD), transmission electron microscopy, scanning electron microscopy (SEM), elemental mapping, Raman spectroscopy, X-ray photoelectron spectroscopy, and thermogravimetric analysis (TGA) analyses. The kinetic study has shown the high catalytic performance of [DEIm][PF₆]@MOF-5 for the reduction of 4-nitrophenol (NP) compared to other catalysts. The catalyst also exhibited efficient electrochemical activity toward 4-NP reduction. The catalyst was recyclable for more than seven cycles without any significant loss in its catalytic performance. The recycled catalyst was further studied using XRD, FTIR, SEM, and TGA analyses to investigate the structural changes that occurred during the reaction. The catalyst maintained its structural integrity even after seven cycles.

Simultaneous electrochemical determination of nitrophenol isomers based on macroporous carbon functionalized with amino-bridged covalent organic polycalix[4]arenes

A glassy carbon electrode (GCE) modified by a hybrid, macroporous carbon (MPC) functionalized with triazine bridged covalent organic polycalix[4]arenes (CalCOP) (CalCOP-MPC), has been fabricated and utilized for simultaneous detection of nitrophenols (NP). The obtained CalCOP-MPC were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), cyclic voltammetry (CV), and electrochemical impedance spectroscopy (EIS), which confirmed that MPC had functionalized with CalCOP successfully. Benefiting from the synergistic supramolecular effect of macrocyclic receptor of CalCOP and the excellent electrical properties of MPC, the anodic peaks of o-nitrophenol (o-NP), m-nitrophenol (m-NP), and p-nitrophenol (p-NP) in their mixture can be well separated by the prepared electrode. Differential pulse voltammetry (DPV) measurements at CalCOP-MPC/GCE revealed that the linear ranges of NP isomers were all 1-400 μM, and the detection limit limits were 0.383 μM, 0.122 μM, and 0.212 μM for o-NP, m-NP, and p-NP, respectively. Moreover, the prepared modified electrodes showed a relatively good selectivity and stability, implying the prospect for detecting NP in real environmental samples.

Sensing Methods for Hazardous Phenolic Compounds Based on Graphene and Conducting Polymers-Based Materials

It has been known for years that the phenolic compounds are able to exert harmful effects toward living organisms including humans due to their high toxicity. Living organisms were exposed to these phenolic compounds as they were released into the environment as waste products from several fast-growing industries. In this regard, tremendous efforts have been made by researchers to develop sensing methods for the detection of these phenolic compounds. Graphene and conducting polymers-based materials have arisen as a high potential sensing layer to improve the performance of the developed sensors. Henceforth, this paper reviews the existing investigations on graphene and conducting polymer-based materials incorporated with various sensors that aimed to detect hazardous phenolic compounds, i.e., phenol, 2-chlorophenol, 2,4-dichlorophenol, 2,4,6-trichlorophenol, pentachlorophenol, 2-nitrophenol, 4-nitrophenol, 2,4-dinitrophenol, and 2,4-dimethylphenol. The whole picture and up-to-date information on the graphene and conducting polymers-based sensors are arranged in systematic chronological order to provide a clearer insight in this research area. The future perspectives of this study are also included, and the development of sensing methods for hazardous phenolic compounds using graphene and conducting polymers-based materials is expected to grow more in the future.

Simultaneous determination of nitrophenol isomers based on reduced graphene oxide modified with sulfobutylether-β-cyclodextrin

The present study reports the development of an electrochemical sensor based on sulfobutylether-β-cyclodextrin modified reduced graphene oxide hybrid (SBCD-rGO) for simultaneous detection of nitrophenol isomers. First, SBCD-rGO hybrid was synthesized and detailed characterized. Afterwards, a sensor was fabricated via the modification of glassy carbon electrode (GCE) with SBCD-rGO, and its electrochemical detection performances were also investigated. Then, the constructed electrochemical sensor was applied to detect nitrophenol isomers by voltammetry analysis. The results suggested that the sensitivities were 389.26, 280.88 and 217.19 μA/mM for p-nitrophenol (p-NP), m-nitrophenol (m-NP), and o-nitrophenol (o-NP), respectively, and their corresponding detection limits were all about 0.05 μM. Significantly, the combination of voltammetry analysis with the constructed sensor and data analysis by multiple linear regression realized the simultaneous detection of nitrophenol isomers.

Mn-Fe3O4 nanoparticles anchored on the urushiol functionalized 3D-graphene for the electrochemical detection of 4-nitrophenol

Preparation of highly active and cost-effective electrode materials is of great interest in electrochemical detection. In this study, a simple urushiol-templated solvothermal method combined with calcination was proposed to fabricate N-doped three-dimensional graphene (3D-G) with Mn-doped Fe₃O₄ nanoparticles loaded on the surface (Mn-Fe₃O₄/3D-G). Because of the large active surface area, porous channel and high loading ratio of Mn-Fe₃O₄ nanoparticles, as-prepared Mn-Fe₃O₄/3D-G sensor showed high activity on the determination of 4-nitrophenol (4-NP), which are much improved from the control un-modified samples. The wide linear concentration range (5-100 μM), low detection limit (19 nM) and satisfactory recovery of 4-NP in various water samples (98.38-100.41%) indicated that the Mn-Fe₃O₄/3D-G electrode can be potentially used for real-world applications. This study gives a simple but meaningful strategy for constructing transition metal oxide/graphene composite materials with high electrocatalytic activity.

Ultrasonically assisted synthesis of barium stannate incorporated graphitic carbon nitride nanocomposite and its analytical performance in electrochemical sensing of 4-nitrophenol

We describe the ultrasonic assisted preparation of barium stannate-graphitic carbon nitride nanocomposite (BSO-gCN) by a simple method and its application in electrochemical detection of 4-nitrophenol via electro-oxidation. A bath type ultrasonic cleaner with ultrasonic power and ultrasonic frequency of 100 W and 50 Hz, respectively, was used for the synthesis of BSO-gCN nanocomposite material. The prepared BSO-gCN nanocomposite was characterized by employing several spectroscopic and microscopic techniques such as X-ray diffraction, X-ray photoelectron spectroscopy, fourier transform infra-red, field emission scanning electron microscopy, and high resolution transmission electron microscopy, to unravel the structural and electronic features of the prepared nanocomposite. The BSO-gCN was drop-casted on a pre-treated glassy carbon electrode (GCE), and their sensor electrode was utilized for electrochemical sensing of 4-nitrophenol (4-NP). The BSO-gCN modified GCE exhibited better electrochemical sensing behavior than the bare GCE and other investigated electrodes. The electroanalytical parameters such as charge transfer coefficient (α = 0.5), the rate constant for electron transfer (k_s = 1.16 s^-1) and number of electron transferred were calculated. Linear sweep voltammetry (LSV) exhibited increase in peak current linearly with 4-NP concentration in the range between 1.6 and 50 μM. The lowest detection limit (LoD) was calculated to be 1 μM and sensitivity of 0.81 μA μM^-1 cm^-2_. A 100-fold excess of various ions, such as Ca²⁺, Na⁺, K⁺, Cl^-, I^-, CO₃^2-, NO₃, NH₄⁺ and SO₄^2- did not able to interfere with the determination of 4-NP and high sensitivity for detecting 4-NP in real samples was achieved. This newly developed BSO-gCN could be a potential candidate for electrochemical sensor applications.

Rationally designed RGO@CuO@Mn2O3 as an excellent electrocatalyst for the rapid and real-time detection of 2-nitrophenol

Rationally designed and functional electronic structures of TMOs (precisely Cu and Mn) with purposeful morphologies were prepared using a facile synthetic method.

Ultrasound-assisted synthesis of 3D flower-like zinc oxide decorated fMWCNTs for sensitive detection of toxic environmental pollutant 4-nitrophenol

Sonochemical synthesis of functionalized multi-walled carbon nanotubes (fMWCNTs) embellished 3D flower-like zinc oxide (ZnO) nanocomposite based novel electrochemical sensor for the detection of toxic environmental pollutant 4-nitrophenol (4-NP) is detailed in this paper. We have used laser-assisted synthesis technique in the development of 3D flower-like ZnO nanoparticles (NPs) and ultrasonication method was employed in preparation of ZnO NPs@fMWCNTs nanocomposite using a high-intensity ultrasonic bath DC200H with power of 200 W/cm² and 40 KHz frequency. The nanocomposite was meticulously fabricated on screen printed carbon electrode (SPCE) to carry out various electrochemical analysis. Different characterizations such as Raman spectroscopy, Fourier transform infrared (FT-IR) spectroscopy, UV visible spectroscopy (UV-Vis), X-ray diffraction (XRD), scanning electron microscopy (SEM), and high-resolution transmission electron microscopy (HRTEM) of the materials used in this work were taken. Cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques are used in electrochemical investigations. We have observed well-defined oxidation and reduction peak currents representing electrochemical mechanism of 4-NP at very low potentials for ZnO NPs@fMWCNTs/SPCE. Furthermore, we were able to achieve efficient electrochemical determination of 4-NP using the developed sensor with a high sensitivity of 11.44 μA μM^-1 cm^-2 and very low detection limit (LOD) of 0.013 μM in a broad linear range of 0.06-100 μM. All the significant features of a good sensor including anti-interference, good stability, excellent repeatability, and reproducibility were exhibited by the sensor. Moreover, we have tested practical feasibility of sensor by carrying out real sample analysis on different water samples.

A versatile ratiometric electrochemical sensing platform based on N-Mo2C for detection of m-nitrophenol

M-nitrophenol (m-NP) is a high priority environmental pollutant and poses a series of threats on human health. Accurate and rapid detection of m-NP in practical samples is very important as this is the key prerequisite for its effective monitoring. Eelectrochemical sensor, though long serving as highly sensitive and fast analytical tool, suffers from the bottleneck problems like low specificity, poor reproducibility, susceptibility to internal and external disturbances, etc. Herein, we developed a ratiometric electrochemical sensor (R-ECS) for m-NP detection, in which nitrogen-doped Mo₂C (N-Mo₂C) was deployed as the sensing agent and methylene blue (MB) as the internal reference. Full characterization of N-Mo₂C was carried out in the aspects of morphology, composition, chemical bonds and electrochemical behavior, and the sensing performance of the easy-to-operate R-ECS was evaluated. Complete separation of the oxidation peaks of m-NP and MB was achieved using the MB/N-Mo₂C composite modified electrode and their ratiometric signals were adopted for quantification of m-NP. The linear relation between the electrical signal and the concentration of m-NP is in the range of 1-1500 μM, with the detection limit of 0.256 μM (S/N = 3). The sensor was applied to measure m-NP in real samples from tap water and river. Experimental results demonstrate that it exhibits decent repeatability, reproducibility, stability and selectivity, which proves its great practical potential as an analytical detector.

Reduced Graphene Oxide-Conjugated Urchin-Like NiCo2O4 Nanostructures for Individual Detection of o-Nitro and p-Amino Phenol

This work introduced a facile synthesis method of reduced graphene oxide-conjugated urchin-like NiCo2O4 nanostructures via a simple, cost-effective, and environmental-friendly one-pot hydrothermal method. The as-prepared rGO-NiCo2O4 nanocomposites were used to fabricate 3-aminopropyltriethoxysilane-modified glassy carbon electrode (GCE/APTES/rGO-NiCo2O4) for ultrasensitive electrochemical detection of o-nitro (o-NP) and p-amino (p-AP) phenols. The structure and morphology of the nanocomposite were characterized by X-ray diffraction, Fourier-transform infrared spectroscopy, scanning electron microscopy, and transmission electron microscopy. Electrochemical experiments revealed that the nanocomposite exhibited remarkable electrochemical performances. A linear relationship is observed with the differential pulse voltammetry experiment between the peak currents and the concentrations in the ranges of 5.0 × 10-9 to 5.0 × 10-7 M (R 2 = 0.996) and 1.0 × 10-6 to 2.5 × 10-5 M (R 2 = 0.992) for o-NP and of 1.0 × 10-8 to 5.0 × 10-7 M (R 2 = 0.996) and 1.0 × 10-6 to 1.0 × 10-4 M (R 2 = 0.987) for p-AP. The calculated detection limits (S/N = 3) are 5.0 × 10-9 M and 1.0 ×10-8 M for o-NP and p-AP, respectively. Furthermore, a very high recovery percentage is obtained with the proposed sensor after successful application in the determination of target analytes in tap water samples.

Hydrothermal Synthesis of Cr2Se3 Hexagons for Sensitive and Low-level Detection of 4-Nitrophenol in Water

We report a simple hydrothermal method used for the synthesis of Cr₂Se₃ hexagons (h-Cr₂Se₃) and its application towards electrochemical sensing of 4-nitrophenol (4-NP). The formation of h-Cr₂Se₃ was confirmed by using scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray diffraction, and X-ray photoelectron spectroscopy. The electrochemical activity of the h-Cr₂Se₃ modified screen-printed carbon electrode (SPCE) towards 4-NP was studied using cyclic voltammetry (CV) and amperometric i-t techniques. Typically, the obtained results were compared with those for a bare SPCE. The CV result clearly reveals that h-Cr₂Se₃ modified SPCE has higher catalytic activity towards reduction of 4-NP than bare SPCE. Hence, h-Cr₂Se₃ modified SPCE was concluded as a viable sensor for sensitive determination of 4-NP. Under optimized conditions, h-Cr₂Se₃ modified SPCE demonstrates the excellent capacity to detect the 4-NP in a linear range from 0.05 µM to 908.0 µM. The LOD and sensitivity in detection of 4-NP were determined at 0.01 µM and 1.24 µAµM⁻¹ cm⁻² respectively. The sensor is highly selective and stable and shows reproducible recovery of 4-NP in domestic supply and river water samples.

A new strategy for the sensitive electrochemical determination of nitrophenol isomers using β-cyclodextrin derivative-functionalized silicon carbide

An illustration of simultaneous electrochemical determination of nitrophenol isomers using β-cyclodextrin derivative-functionalized silicon carbide.

Magnetite-platinum nanoparticles-modified glassy carbon electrode as electrochemical detector for nitrophenol isomers

A glassy carbon electrode was modified with magnetite and platinum nanoparticles stabilized with 3-n-propyl-4-picoline silsesquioxane chloride. This chemically-modified electrode is proposed for the first time for the individual or simultaneous electrochemical detection of nitrophenol isomers. Nanoparticles act as catalysts and also increase the surface area. The polymer stabilizes the particles and provides the electrochemical separation of isomers. Under optimized conditions, the reduction peak currents, obtained by differential-pulse voltammetry, of 2-, 3-, and 4-nitrophenol increased linearly with increases in their concentration in the range of 0.1-1.5μmolL^-1. In individual analysis, the detection limits were 33.7nmolL^-1, 45.3nmolL^-1 and 48.2nmolL^-1, respectively. Also, simultaneous analysis was possible for 2-, and 4-nitrophenol. In this case, the separation of the peak potentials was 0.138V and the detection limits were 69.6nmolL^-1 and 58.0nmolL^-1, respectively. These analytical figures of merit evidence the outstanding performance of the modified electrode, which was also successfully applied to the individual determination of isomers in environmental and biological samples. The magnetite and platinum nanoparticles modified glassy carbon electrode was able to detect nitrophenol isomers at the ppm level in rain water and human urine samples.

Determination of 4-nitrophenol in water by use of a screen-printed carbon electrode modified with chitosan-crafted ZnO nanoneedles

The toxicity and environmental pollution by nitro aromatic compounds in water samples is the most recognized problem in worldwide. Hence, we have developed a simple and highly sensitive electrochemical method for the determination of 4-nitrophenol (4-NP) in water samples based on a chitosan (CHT) crafted zinc oxide nanoneedles (ZnO NDs) modified screen printed carbon electrode. The CHT/ZnO NDs were characterized by Field emission scanning electron microscope, Fourier transform infrared spectroscopy and X-ray diffraction technique. The CHT/ZnO NDs modified electrode showed an enhanced electrocatalytic activity and lower potential detection towards 4-NP, compared with other modified electrodes. Under optimum conditions, the differential pulse voltammetry (DPV) response of CHT/ZnO NDs modified electrode displayed a wide linear response range from 0.5 to 400.6μM towards the detection of 4-NP with a detection limit (LOD) of 0.23μM. The CHT/ZnO NDs modified electrode was used for specific and sensitive detection of 4-NP in presence of possible interfering species and common metal ions with long-term stability. In addition, the excellent analytical performance of the proposed sensor was successfully applied for determination of 4-NP in water samples.

Highly-sensitive electrocatalytic determination for toxic phenols based on coupled cMWCNT/cyclodextrin edge-functionalized graphene composite

Highly-sensitive electrocatalytic determination of toxic phenol compounds is of significance in environmental monitoring due to their low degradation and high toxicity to the environment and humans. In this paper, a rapid and sensitive electrochemical sensor based on coupled carboxyl-multi-walled carbon nanotube (cMWCNT) and cyclodextrin (CD) edge-functionalized graphene composite was successfully employed towards trace detection of three typical phenols (4-aminophenol, 4-AP; 4-chlorophenol, 4-CP; 4-nitrophenol, 4-NP). The morphology studies from scanning electron microscope and transmission electron microscope analysis revealed that cMWCNTs as conductive bridges were successfully incorporated into CD edge-functionalized graphene layers. Further, The electrocatalytic detection performance of the 3D simultaneously reduced and self-assembled sensing architecture (GN-CD-cMWCNT) with trace amounts of CDs was evaluated. The electrochemical studies demonstrated that GN-CD-cMWCNT displays excellent electrocatalytic activity, high sensitivity and stability. Under optimal conditions, the current responses of 4-AP, 4-CP and 4-NP are linear to concentrations over two different ranges, with low detection limit of 0.019, 0.017 and 0.027μM (S/N=3), respectively. And, GN-CD-cMWCNT shows an excellent anti-interference ability against electroactive species and metal ions. In addition, validation of the applicability of the presented sensor was also performed for the determination of three phenols in tap water sample with satisfactory results.

Facile polymerization of β-cyclodextrin functionalized graphene or graphene oxide nanosheets using citric acid crosslinker by in situ melt polycondensation for enhanced electrochemical performance

In this study, we report a facile, environmental friendly route to synthesize water-insoluble β-cyclodextrin (β-CD)/graphene oxide (GO) or reduced graphene oxide (rGO) nanocomposite hydrogels.