Nanoporous Gold: From Structure Evolution to Functional Properties in Catalysis and Electrochemistry

Nanoporous gold (NPG) is characterized by a bicontinuous network of nanometer-sized metallic struts and interconnected pores formed spontaneously by oxidative dissolution of the less noble element from gold alloys. The resulting material exhibits decent catalytic activity for low-temperature, aerobic total as well as partial oxidation reactions, the oxidative coupling of methanol to methyl formate being the prototypical example. This review not only provides a critical discussion of ways to tune the morphology and composition of this material and its implication for catalysis and electrocatalysis, but will also exemplarily review the current mechanistic understanding of the partial oxidation of methanol using information from quantum chemical studies, model studies on single-crystal surfaces, gas phase catalysis, aerobic liquid phase oxidation, and electrocatalysis. In this respect, a particular focus will be on mechanistic aspects not well understood, yet. Apart from the mechanistic aspects of catalysis, best practice examples with respect to material preparation and characterization will be discussed. These can improve the reproducibility of the materials property such as the catalytic activity and selectivity as well as the scope of reactions being identified as the main challenges for a broader application of NPG in target-oriented organic synthesis.

Synthesis of textured discontinuous-nanoisland Ca3Co4O9 thin films

Controllable engineering of the nanoporosity in layered Ca₃Co₄O₉ remains a challenge. Here, we show the synthesis of discontinuous films with islands of highly textured Ca₃Co₄O₉, effectively constituting distributed nanoparticles with controlled porosity and morphology. These discontinuously dispersed textured Ca₃Co₄O₉ nanoparticles may be a candidate for hybrid thermoelectrics.

Synergistic effect of oxidation etching and phase transformation triggered by controllable ion-bath microenvironments toward constructing ultra-thin porous nanosheets for accelerated industrial water splitting at high current density

Precisely tailoring the structure of inorganic materials at the micron and nanometer scales, especially in collaboration with component customization to design efficient, stable and low-cost transition-metal-based catalysts for industrial electrocatalytic water splitting (EWS) is a key renewable energy technology, but still facing a daunting challenge. Here, the controllable escape of Ni atom is adopted to disturb the hydrothermal ion-bath environment, thereby resulting in the coexistence of high valence Ni and Fe ions. Combined with a one-step hydrothermal coordination strategy, the timeline-adjusted ion-bath microenvironment can effectively trigger the phase transformation of carbonate hydroxide hydrate nanosheets (NFCH) to nickel ferrite intercalated NFCH ultra-thin porous nanosheets (NF-CH-O). Thanks to the high-energy phase boundary synergistic effect and the rapid mass transfer advantages of ultra-thin porous nanostructures, the as-prepared NF-CH-O nanosheets exhibit remarkable oxygen and hydrogen evolution reaction (OER/HER) catalytic activity and stability, with low overpotentials of 207/191 mV at 50 mA cm^-2, respectively, as well as the activity retention for 100 h. The alkaline water electrolyzer set up with NF-CH-O as both anodic and cathodic electrodes only requires a cell potential of 1.688 V to reach 50 mA cm^-2 in a continuous operation of 100 h. More impressively, NF-CH-O only requires overpotentials of 266, 292 mV and 1.877 V to drive high current densities up to 500 mA cm^-2 for OER, HER and EWS, respectively, and exhibits excellent stability with a reduction in the activity of less than 10% over cycles of more than 65 h. This work highlights the room-temperature controllable ion-bath oxidative etching strategy to design efficient bifunctional catalysts with ultra-thin porous structure and high-current-density activity. Meanwhile, combined with the advantages of direct growth on the substrate for mass production, such meticulous consideration of nanostructured design will be more competitive in the H₂-production industry.

Electrocatalytic carboxylation of halogenated compounds with mesoporous silver electrode materials

Mesoporous silver materials are used as electrocatalysts for halogenated compounds. The mesoporous silver materials have uniform mesoporous size (8 nm), large specific surface area (12 m² g⁻¹), high pore volume (0.07 cm³ g⁻¹), and a good 3D network structure of the metallic silver skeleton. The results show that the prepared materials exhibit high performance in electrocatalytic carboxylation of halogenated compounds to acid (78%).

Mesoporous silver materials are used as electrocatalysts for halogenated compounds and exhibit high performance in electrocatalytic carboxylation of halogenated compounds to carboxylic acid (78%).

Porous Gold: A New Frontier for Enzyme-Based Electrodes

Porous gold (PG) layers modified electrodes have emerged as valuable enzyme support to realize multiple enzyme-based bioelectrochemical devices like biosensors, enzymatic fuel cells (EFCs), smart drug delivery devices triggered by enzyme catalyzed reactions, etc. PG films can be synthesized by using different methods such as dealloying, electrochemical (e.g., templated electrochemical deposition, self-templated electrochemical deposition, etc.) self-assembly and sputter deposition. This review aims to summarize the recent findings about PG synthesis and electrosynthesis, its characterization and application for enzyme-based electrodes used for biosensors and enzymatic fuel cells (EFCs) development.

Electrochemical performance of ruthenium nanoparticles decorated on nitride carbon for non-enzymatic detection of hydrogen peroxide

Development of high-performance Pt-free non-enzymatic hydrogen peroxide (H2O2) sensors on the basis of supported metal nanoparticles (NPs) is important for industrial and biological applications. Here, we report the preparation of ultrafine, surface-clean, and well-distributed Ru NPs and concomitant formation of nitride carbon (Ru/NC) by pyrolyzing tris(2,2'-bipyridyl)ruthenium(ii) chloride (TBRC) with carbon. The use of the nitrogen (N)-containing Ru complex of TBRC as the metal precursor is essential for the preparation of ultrafine and highly dispersed Ru NPs (1.20 nm in diameter) on a NC support. The as-synthesized Ru/NC-800 displays superior analytical performance for non-enzymatic detection of H2O2 with a low detection limit of 0.468 μM, high sensitivity of 698 μA mM-1 cm-2, excellent linear detection ranging from 0.001 to 10.000 mM, good stability, and high selectivity. The control experiment results indicate that the high-performance of Ru/NC-800 must be ascribed to the ultrasmall and highly dispersed Ru NPs and N-doping, which can supply a higher density of active sites available for H2O2 detection. This study provides a facile strategy to synthesize ultrafine metal NPs and for concomitant production of NC for electrocatalytic non-enzymatic sensing.

Detection of Silver Nanoparticles by Electrochemically Activated Galvanic Exchange

Here we report on the seemingly simple process of galvanic exchange (GE) between electrogenerated AuCl₄^- and silver nanoparticles (AgNPs). The results were obtained in the specific context of using AgNPs as labels for bioassays in paper fluidic devices. Results obtained from a combined electrochemistry and microscopy study indicate that the GE process results in recovery of only ∼5% of the total equivalents of Ag present in the system. This low value is a consequence of two factors. First, after an initial fraction of each AgNP undergoes GE, a Au shell forms around the remaining AgNP core preventing further exchange. Second, to simulate a true biological fluid, the experiments were carried out in a Cl^--containing buffer. Consequently, some Ag⁺ formed during GE precipitates as AgCl, and it also serves to block additional GE. Following optimization of the GE process, it was possible to detect AgNP label concentrations as low as 2.6 fM despite these limitations.

Biofouling-Resistant Platinum Bimetallic Alloys

A new electrosynthetic approach for the fabrication of three-dimensional bicontinuous nanoporous platinum-based (3D-BC-NP-Pt(Au)) electrodes is described. Binary Pt-Ag alloys are first electrodeposited on gold substrates from appropriately formulated plating solutions. Following annealing and dealloying, a new family of nanoporous platinum-based electrodes emerges whose morphology, porosity, and chemical compositions depend on electrodeposition parameters and plating solution composition. Scanning electron microscopy images reveal an interesting and distinctive nanoporous gold-like microstructure with pores and ligaments in the 10-30 nm range arranged in a bicontinuous fashion throughout the thickness of the film. X-ray photoelectron spectroscopy (XPS) confirms that the as-formed electrodeposited films are silver-rich platinum binary alloys. Interestingly, XPS also reveals that after annealing and dealloying, the electrodes are actually ternary alloys containing platinum, gold, and a small amount of residual silver that remains after dealloying. Electrochemical measurements are consistent with this result and disclose a high surface area with roughness factors of 15-24. The ability to successfully conduct electrochemical measurements in biofouling solutions via a unique biosieving-like mechanism is demonstrated by exposure of the unique 3D bicontinuous nanoporous platinum-based electrode to fibrinogen in phosphate buffer and in a solution containing red blood cells. The work described herein has the potential to enrich the fields of electrochemical sensing and biosensing via the introduction of new 3D bicontinuous nanostructured porous platinum-based electrodes that can be easily and reliably fabricated.

Synthesis of Pt-Rich@Pt–Ni alloy core–shell nanoparticles using halides

We demonstrated the synthesis of Pt–Ni alloy core–shell nanoparticles (NPs) via a one-pot thermal decomposition method, optimized by variation of the concentration of cetyltrimethylammonium chloride (CTAC) and reaction time.

Electrochemically dealloyed platinum with hierarchical pore structure as highly active catalytic coating

Electrochemical dealloying of Pt–Si produces Pt films with hierarchical pore structure and superior performance in butadiene hydrogenation.

Electroassisted codeposition of sol-gel derived silica nanocomposite directs the fabrication of coral-like nanostructured porous gold

Herein, we report on a one-step coelectrodeposition method to form gold-silica nanocomposite materials from which high surface area nanostructured gold electrodes can be produced. The as-prepared Au-SiO2 films possess an interconnected three-dimensional porous framework with different silica-gold ratios depending on the deposition solutions and parameters. Chemical etching of the nanocomposite films using hydrofluoric acid resulted in the formation of nanostructured porous gold films with coral-like structures and pores in the nanometer range. The cross-linkage of the gold coral branches resulted in the generation of a porous framework. X-ray photoelectron spectroscopy confirms the complete removal of silica. Well-controlled surface area enhancement, film thickness, and morphology were achieved by manipulating the deposition parameters, such as potential, time, and gold ion and sol-gel monomer concentrations in the deposition solution. An enhancement in the surface area of the electrode up to 57 times relative to the geometric area has been achieved. The thickness of the as-prepared Au-SiO2 nanocomposite films is relatively high and varied from 8 to 15 μm by varying the applied deposition potential while the thickness of the coral-like nanostructured porous gold films ranged from 0.22 to 2.25 μm. A critical sol-gel monomer concentration (CSGC) was determined at which the deposited silica around the gold coral was able to stabilize the coral-like gold nanostructures, while below the CSGC, the coral-like gold nanostructures were unstable and the surface area of the nanostructured porous gold electrodes decreased.