Nanostructured Hexacyanoferrate Intercalated Ni/Al Layered Double Hydroxide Modified Electrode as a Sensitive Electrochemical Sensor for Paracetamol Determination

An on-site and portable electrochemical sensing platform based on spinel zinc ferrite nanoparticles for the quality control of paracetamol in pharmaceutical samples

In this study, crystalline spinel zinc ferrite nanoparticles (ZnFe2O4 NPs) were successfully prepared and proposed as a high-performance electrode material for the construction of an electrochemical sensing platform for the detection of paracetamol (PCM). By modifying a screen-printed carbon electrode (SPE) with ZnFe2O4 NPs, the electrochemical characteristics of the ZnFe2O4/SPE and the electrochemical oxidation of PCM were investigated by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), chronoamperometry (CA), and differential pulse voltammetry (DPV) methods. The calculated electrochemical kinetic parameters from these techniques including electrochemically active surface area (ECSA), peak-to-peak separation (ΔEp), charge transfer resistance (Rct), standard heterogeneous electron-transfer rate constants (k0), electron transfer coefficient (α), catalytic rate constant (kcat), adsorption capacity (Γ), and diffusion coefficient (D) proved that the as-synthesized ZnFe2O4 NPs have rapid electron/mass transfer characteristics, intrinsic electrocatalytic activity, and facilitate the adsorption-diffusion of PCM molecules towards the modified electrode surface. As expected, the ZnFe2O4/SPE offered excellent analytical performance towards sensing of PCM with a detection limit of 0.29 μM, a wide linear range of 0.5-400 μM, and high electrochemical sensitivity of 1.1 μA μM-1 cm-2. Moreover, the proposed ZnFe2O4-based electrochemical nanosensor also exhibited good repeatability, high anti-interference ability, and practical feasibility toward PCM sensing in a pharmaceutical tablet. Based on these observations, the designed electrochemical platform not only provides a high-performance nanosensor for the rapid and highly efficient detection of PCM but also opens a new avenue for routine quality control analysis of pharmaceutical formulations.

Enhanced Acetaminophen Electrochemical Sensing Based on Nitrogen-Doped Graphene

Because of the widespread acetaminophen usage and the danger of harmful overdosing effects, developing appropriate procedures for its quantitative and qualitative assay has always been an intriguing and fascinating problem. A quick, inexpensive, and environmentally friendly approach based on direct voltage anodic graphite rod exfoliation in the presence of inorganic salt aqueous solution ((NH4)2SO4-0.3 M) has been established for the preparation of nitrogen-doped graphene (exf-NGr). The XRD analysis shows that the working material appears as a mixture of few (76.43%) and multi-layers (23.57%) of N-doped graphenes. From XPS, the C/O ratio was calculated to be 0.39, indicating a significant number of structural defects and the existence of multiple oxygen-containing groups at the surface of graphene sheets caused by heteroatom doping. Furthermore, the electrochemical performances of glassy carbon electrodes (GCEs) modified with exf-NGr for acetaminophen (AMP) detection and quantification have been assessed. The exf-NGr/GCE-modified electrode shows excellent reproducibility, stability, and anti-interfering characteristics with improved electrocatalytic activity over a wide detection range (0.1-100 µM), with a low limit for AMP detection (LOD = 3.03 nM). In addition, the developed sensor has been successfully applied in real sample analysis for the AMP quantification from different commercially available pharmaceutical formulations.

Recent trends in layered double hydroxides based electrochemical and optical (bio)sensors for screening of emerging pharmaceutical compounds

The rapid expansion of the human population has given rise to new environmental and biomedical concerns, contributing to different advancements in the pharmaceutical industry. In the field of analytical chemistry over the last few years, layered double hydroxides (LDHs) have drawn significant attention, owing to their extraordinary properties. Furthermore, the novel advancement of LDH-based optical and electrochemical platforms to detect different pharmaceutical materials has acquired substantial attention because of their outstanding specificity, actual-time controlling, and user-friendliness. This review aims to recapitulate advanced LDHs-based optical and electrochemical sensors and biosensors to identify and measure important pharmaceutical compounds, such as anti-depressant, anti-inflammatory, anti-viral, anti-bacterial, anti-cancer, and anti-fungal drugs. Additionally, fundamental parameters, namely interactions between sensor and analyte, design rationale, classification, selectivity, and specificity are considered. Finally, the development of high-efficiency techniques for optical and electrochemical sensors and biosensors is featured to deliver scientists and readers a complete toolbox to identify a broad scope of pharmaceutical substances. Our goals are: (i) to elucidate the characteristics and capabilities of available LDHs for the identification of pharmaceutical compounds; and (ii) to deliver instances of the feasible opportunities that the existing devices have for the developed sensing of pharmaceuticals regarding the protection of ecosystems and human health at the global level.

Morphology Effect of Bismuth Vanadate on Electrochemical Sensing for the Detection of Paracetamol

Morphology-control, as a promising and effective strategy, is widely implemented to change surface atomic active sites and thus enhance the intrinsic electrocatalytic activity and selectivity. As a typical n-type semiconductor, a series of bismuth vanadate samples with tunable morphologies of clavate, fusiform, flowered, bulky, and nanoparticles were prepared to investigate the morphology effect. Among all the synthesized samples, the clavate shaped BiVO₄ with high index facets of (112), (301), and (200) exhibited reduced extrinsic pseudocapacitance and enhanced redox response, which is beneficial for tackling the sluggish voltammetric response of the traditional nanoparticle on the electrode surface. Benefiting from the large surface-active area and favorable ion diffusion channels, the clavate shaped BiVO₄ exhibited the best electrochemical sensing performance for paracetamol with a linear response in the range of 0.5–100 µmol and a low detection limit of 0.2 µmol. The enhanced electrochemical detection of paracetamol by bismuth vanadate nanomaterials with controllable shapes indicates their potential for applications as electrochemical sensors.

Transition Metal Substituted Barium Hexaferrite-Modified Electrode: Application as Electrochemical Sensor of Acetaminophen

This study used substituted barium hexaferrites, which were previously prepared and reported by the authors, to detect acetaminophen by the modification of a conventional glassy carbon electrode (GCE), which led to promising results. The synthesis of this electrode-modifying material was conducted using a citrate sol gel process. A test synthesis using glycerin and propylene glycol revealed that glycerin produced a better result, while less positive anodic potential values were associated with the electrooxidation of N-acetyl-p-aminophenol (NAP). Excellent electroactivity was exhibited by the cobalt-substituted barium-hexaferrite-nanomaterial-modified electrode. A good linear relationship between the concentration and the current response of acetaminophen (paracetamol) was obtained with a detection limit of (0.255 ± 0.005) µM for the Ba1.0Co1.22Fe11.41O18.11 GCE, (0.577 ± 0.007) µM for the Ba1.14Cu0.82Fe11.65O18.02 GCE, and (0.595 ± 0.008) µM for the bare GCE. The levels of NAP in a real sample of urine were quantitatively analyzed using the proposed method, with recovery ranges from 96.6% to 101.0% and 93.9% to 98.4% for the modified electrode with Cobalt-substituted barium hexaferrites (CoFM) and Copper-substituted barium hexaferrites (CuFM), respectively. These results confirm the high electrochemical activity of Ba1.0Co1.22Fe11.41O18.11 nanoparticles and thus their potential for use in the development of sensing devices for substances of pharmaceutical interest, such as acetaminophen (NAP).

Recent Advances in Layered Double Hydroxide-Based Electrochemical and Optical Sensors

Layered double hydroxides (LDHs) have attracted considerable attention as promising materials for electrochemical and optical sensors owing to their excellent catalytic properties, facile synthesis strategies, highly tunable morphology, and versatile hosting ability. LDH-based electrochemical sensors are affordable alternatives to traditional precious-metal-based sensors, as LDHs can be synthesized from abundant inorganic precursors. LDH-modified probes can directly catalyze or host catalytic compounds that facilitate analyte redox reactions, detected as changes in the probe's current, voltage, or resistance. The porous and lamellar structure of LDHs allows rapid analyte diffusion and abundant active sites for enhanced sensor sensitivity. LDHs can be composed of conductive materials such as reduced graphene oxide (rGO) or metal nanoparticles for improved catalytic activity and analyte selectivity. As optical sensors, LDHs provide a spacious, stable structure for synergistic guest-host interactions. LDHs can immobilize fluorophores, chemiluminescence reactants, and other spectroscopically active materials to reduce the aggregation and dissolution of the embedded sensor molecules, yielding enhanced optical responses and increased probe reusability. This review discusses standard LDH synthesis methods and overviews the different electrochemical and optical analysis techniques. Furthermore, the designs and modifications of exemplary LDHs and LDH composite materials are analyzed, focusing on the analytical performance of LDH-based sensors for key biomarkers and pollutants, including glucose, dopamine (DA), H2O2, metal ions, nitrogen-based toxins, and other organic compounds.

Paracetamol Sensing with a Pencil Lead Electrode Modified with Carbon Nanotubes and Polyvinylpyrrolidone

The determination of paracetamol is a common need in pharmaceutical and environmental samples for which a low-cost, rapid, and accurate sensor would be highly desirable. We develop a novel pencil graphite lead electrode (PGE) modified with single-wall carbon nanotubes (SWCNTs) and polyvinylpyrrolidone (PVP) polymer (PVP/SWCNT/PGE) for the voltammetric quantification of paracetamol. The sensor shows remarkable analytical performance in the determination of paracetamol at neutral pH, with a limit of detection of 0.38 μM and a linear response from 1 to 500 μM using square-wave voltammetry (SWV), which are well suited to the analysis of pharmaceutical preparations. The introduction of the polymer PVP can cause dramatic changes in the sensing performance of the electrode, depending on its specific architecture. These effects were investigated using cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and scanning electron microscopy (SEM). The results indicate that the co-localization and dispersion of PVP throughout the carbon nanotubes on the electrode are key to its superior electrochemical performance, facilitating the electrical contact between the nanotubes and with the electrode surface. The application of this sensor to commercial syrup and tablet preparations is demonstrated with excellent results.

Chemically modified carbon-based electrodes for the determination of paracetamol in drugs and biological samples

Paracetamol is a non-steroidal, anti-inflammatory drug widely used in pharmaceutical applications for its sturdy, antipyretic and analgesic action. However, an overdose of paracetamol can cause fulminant hepatic necrosis and other toxic effects. Thus, the development of advantageous analytical tools to detect and determine paracetamol is required. Due to simplicity, higher sensitivity and selectivity as well as costefficiency, electrochemical sensors were fully investigated in last decades. This review describes the advancements made in the development of electrochemical sensors for the paracetamol detection and quantification in pharmaceutical and biological samples. The progress made in electrochemical sensors for the selective detection of paracetamol in the last 10 years was examined, with a special focus on highly innovative features introduced by nanotechnology. As the literature is rather extensive, we tried to simplify this work by summarizing and grouping electrochemical sensors according to the by which manner their substrates were chemically modified and the analytical performances obtained.

Determination of morphine and its metabolites in the biological samples: an updated review

Morphine (MO) as an opioid analgesic is used for the treatment of moderate-to-severe pains, particularly cancer-related pains. Pharmacologic studies on MO are complicated due to drugs binding to the protein or metabolization to active metabolites, and even inter-individual variability. This necessitates the selection of a reliable analytical method for monitoring MO and the concentrations of its metabolites in the biological samples for the pharmacokinetic or pharmacodynamic investigations. Therefore, this study was conducted to review all the analytical research carried out on MO and its metabolites in the biological samples during 2007-2019 as an update to the study by Bosch et al. (2007).

An optical sensing platform based on hexacyanoferrate intercalated layered double hydroxide nanozyme for determination of chromium in water

In this work, hexacyanoferrate intercalated Ni/Al LDH (Ni/Al-Fe(CN)₆ LDH) nanozyme was synthesized by one-pot co-precipitation method and used for determination of chromium in water samples by employing its peroxidase mimicking activity. The synthesized nanozyme can effectively catalyze the oxidation of fluorometric peroxidase substrate terephthalic acid by H₂O₂ to produce a highly fluorescent product. It was found that Cr(VI) promotes the peroxidase-like activity of Ni/Al-Fe(CN)₆ LDH and this effect was intensified by increasing the Cr(VI) concentration. Several variables affecting the fluorescence intensity including the concentration of nanoparticles and reagents as well as reaction time were investigated and optimized. Under the optimal conditions, good linearity was observed in the range of 0.067-10 μM Cr(VI), and limit of detection and quantification were found to be 0.039 and 0.131 μM, respectively. Furthermore, the developed method showed good applicability for the determination of total Cr based on the oxidation of Cr (III) to Cr (VI). The applicability of the proposed method was demonstrated by analyzing various environmental water samples. The presented nanozyme displayed superior benefits in terms of reusability, repeatability, cost and environment-friendly features. The present work aims to expand LDHs based enzyme mimics to optical sensor fields.

A new chemiluminescence method for the determination of 8-hydroxyguanine based on l-histidine bound nickel nanoparticles

A new chemiluminescence aptasensor for sensitive and efficient detection of 8-hydroxyguanine based on the synergistic interaction of Ni NPs@l-histidine@aptamer@MBs has been developed, and it has been applied in the real urine samples of cancer patients.

A Novel Sensitive Doxorubicin Hydrochloride Electrochemical Sensor Based on a Nickel Hexacyanoferrate/Ni-Al-LDH Modified Gold Electrode

A highly sensitive and selective electrochemical sensor has been fabricated by the electrodepositing of nickel hexacyanoferrate (NiHCF) on a Ni-Al layered double hydroxides (Ni-Al-LDH) modified Au electrode for the quantification of doxorubicin hydrochloride (DOX). The characterization of synthesized nanomaterials has been conducted by scanning electron microscopy, energy dispersive X-ray spectroscopy and electrochemical methods. The synergistic effect of NiHCF and Ni-Al-LDH not only excellently improves the performance of DOX electro-reduction, but also promotes electron transfer between DOX and the NiHCF/Ni-Al-LDH/Au sensor. The differential pulse voltammetric response of the NiHCF/Ni-Al-LDH/Au sensor shows a linear relationship with the concentration of DOX in the range of 1.0 × 10-8 - 6.2 × 10-6 mol L-1, a limit of detection of 1.9 × 10-9 mol L-1 (S/N = 3) and a sensibility of 14.71 A mol L-1 cm-2. The developed sensor exhibits good sensitivity, reproducibility, anti-interference and a long-term stability property. Furthermore, the NiHCF/Ni-Al-LDH/Au sensor has been successfully applied to determine DOX in biological samples and human blood serum samples.

Layered double hydroxide nanoparticles embedded in a biopolymer: a novel platform for electroanalytical determination of diazepam

A Co–Al layered double hydroxide/poly(tyrosine) modified glassy carbon electrode was prepared and used for electrocatalytic determination of diazepam in real samples.