A Biofuel Cell Based on Biocatalytic Reactions of Glucose on Both Anode and Cathode Electrodes

NAD(P)-dependent glucose dehydrogenase: Applications for biosensors, bioelectrodes, and biofuel cells

This review discusses the physical and chemical properties of nicotinamide redox cofactor dependent glucose dehydrogenase (NAD(P) dependent GDH) and its extensive application in biosensors and bio-fuel cells. GDHs from different organisms show diverse biochemical properties (e.g., activity and stability) and preferences towards cofactors, such as nicotinamide adenine dinucleotide (NAD⁺) and nicotinamide adenine dinucleotide phosphate (NADP⁺). The (NAD(P)⁺) play important roles in biological electron transfer, however, there are some difficulties related to their application in devices that originate from their chemical properties and labile binding to the GDH enzyme. This review discusses the electrode modifications aimed at immobilising NAD⁺ or NADP⁺ cofactors and GDH at electrodes. Binding of the enzyme was achieved by appropriate protein engineering techniques, including polymerisation, hydrophobisation or hydrophilisation processes. Various enzyme-modified electrodes applied in biosensors, enzymatic fuel cells, and biobatteries are compared. Importantly, GDH can operate alone or as part of an enzymatic cascade, which often improves the functional parameters of the biofuel cell or simply allows use of cheaper fuels. Overall, this review explores how NAD(P)-dependent GDH has recently demonstrated high potential for use in various systems to generate electricity from biological sources for applications in implantable biomedical devices, wireless sensors, and portable electronic devices.

New Biocatalyst Including a 4-Nitrobenzoic Acid Mediator Embedded by the Cross-Linking of Chitosan and Genipin and Its Use in an Energy Device

A new anodic catalyst consisting of carbon nanotube, 4-nitrobenzoic acid, chitosan, genipin, and glucose oxidase (GOx) (CNT/4-NBA/[Chit/GOx/GP]) is suggested to promote the glucose oxidation reaction (GOR) and the performance of enzymatic biofuel cell (EBC). In this catalyst, through the cross-linked structure of chitosan and genipin and the proper distribution of amine groups within chitosan, many GOx molecules are maximally captured, their leaching out is suppressed, and the GOR is improved upon. In addition, 4-nitrobenzoic acid plays the role of mediator well. The effect induced by the cross-linked structure is evaluated by ultraviolet-visible (UV-vis) spectroscopy, pH measurements, and electrochemical characterizations. According to the characterizations, the new CNT/4-NBA/[Chit/GOx/GP] catalyst contains a large amount of GOx (17.8 mg/mL) and produces a high anodic current (331 μA/cm² at 0.3 V vs Ag/AgCl) with a low onset potential (0.05 V vs Ag/AgCl) because its catalytic activity follows the desirable reaction pathway that minimizes creation of a protonated amine group that interferes with GOR. When the performance of EBC using this catalyst as an anodic electrode is measured, the EBC shows a high open-circuit voltage of 0.54 V and a maximum power density of 38 μW/cm².

Development of graphene-based enzymatic biofuel cells: A minireview

Enzymatic biofuel cells (EBFCs) have attracted increasing attention due to their potential to harvest energy from a wide range of fuels under mild conditions. Fabrication of effective bioelectrodes is essential for the practical application of EBFCs. Graphene possesses unique physiochemical properties making it an attractive material for the construction of EBFCs. Despite these promising properties, graphene has not been used for EBFCs as frequently as carbon nanotubes, another nanoscale carbon allotrope. This review focuses on current research progress in graphene-based electrodes, including electrodes modified with graphene derivatives and graphene composites, as well as free-standing graphene electrodes. Particular features of graphene-based electrodes such as high conductivity, mechanical flexibility and high porosity for bioelectrochemical applications are highlighted. Reports on graphene-based EBFCs from the last five years are summarized, and perspectives for graphene-based EBFCs are offered.

Two-dimensional graphene paper supported flexible enzymatic fuel cells

Application of enzymatic biofuel cells (EBFCs) in wearable or implantable biomedical devices requires flexible and biocompatible electrode materials. To this end, freestanding and low-cost graphene paper is emerging among the most promising support materials. In this work, we have exploited the potential of using graphene paper with a two-dimensional active surface (2D-GP) as a carrier for enzyme immobilization to fabricate EBFCs, representing the first case of flexible graphene papers directly used in EBFCs. The 2D-GP electrodes were prepared via the assembly of graphene oxide (GO) nanosheets into a paper-like architecture, followed by reduction to form layered and cross-linked networks with good mechanical strength, high conductivity and little dependence on the degree of mechanical bending. 2D-GP electrodes served as both a current collector and an enzyme loading substrate that can be used directly as a bioanode and biocathode. Pyrroloquinoline quinone dependent glucose dehydrogenase (PQQ-GDH) and bilirubin oxidase (BOx) adsorbed on the 2D-GP electrodes both retain their biocatalytic activities. Electron transfer (ET) at the bioanode required Meldola blue (MB) as an ET mediator to shuttle electrons between PQQ-GDH and the electrode, but direct electron transfer (DET) at the biocathode was achieved. The resulting glucose/oxygen EBFC displayed a notable mechanical flexibility, with a wide open circuit voltage range up to 0.665 V and a maximum power density of approximately 4 μW cm^-2 both fully competitive with reported values for related EBFCs, and with mechanical flexibility and facile enzyme immobilization as novel merits.

A hybrid glucose fuel cell based on electrodeposited carbon nanotubes and platinized carbon

Herein, we report on a hybrid fuel cell using electrodeposited multi-walled carbon nanotubes (MWCNTs) as a bioanode template for the immobilization of pyrolloquinoline quinone glucose dehydrogenase (PQQ-GDH) and electrodeposited platinized screen printed carbon nanotubes as the cathode. By depositing these nanostructures, high surface area is realized, wherein efficient direct electron transfer and excellent bioelectrocatalytic performance is achieved. The hybrid fuel cell comprised Nafion/PQQ-GDH/MWCNTs as the bioanode and a platinized carbon as the cathode to oxidize the glucose fuel and reduce oxygen, respectively. The hybrid fuel cell generated an open circuit voltage and a short circuit current density of 345 mV and 352.48 μA/cm², respectively. The maximum power density of 58.08 μW/cm² at a cell voltage of 198.5 mV is achieved at physiological conditions. This hybrid glucose fuel cell may be helpful for exploiting novel nanostructure carbon and platinum derived electrode substrate framework that incorporates the advantages of both enzymatic and non-enzymatic glucose fuel cells. The method employed herein further shows promise in the development of biomedical power source to drive bio-implantable devices without the use of batteries.

Fully edible biofuel cells

This article describes the first example of edible energy harvesting biofuel cells, based solely on highly biocompatible and ingestible food materials.

Towards implementation of cellular automata in Microbial Fuel Cells

The Microbial Fuel Cell (MFC) is a bio-electrochemical transducer converting waste products into electricity using microbial communities. Cellular Automaton (CA) is a uniform array of finite-state machines that update their states in discrete time depending on states of their closest neighbors by the same rule. Arrays of MFCs could, in principle, act as massive-parallel computing devices with local connectivity between elementary processors. We provide a theoretical design of such a parallel processor by implementing CA in MFCs. We have chosen Conway's Game of Life as the 'benchmark' CA because this is the most popular CA which also exhibits an enormously rich spectrum of patterns. Each cell of the Game of Life CA is realized using two MFCs. The MFCs are linked electrically and hydraulically. The model is verified via simulation of an electrical circuit demonstrating equivalent behaviours. The design is a first step towards future implementations of fully autonomous biological computing devices with massive parallelism. The energy independence of such devices counteracts their somewhat slow transitions-compared to silicon circuitry-between the different states during computation.