Electrochemically Reduced Graphene Oxide for Forensic Electrochemistry: Detection of Cocaine and its Adulterants Paracetamol, Caffeine and Levamisole

Distance-based detection of paracetamol in microfluidic paper-based analytical devices for forensic application

Whisky adulteration is a prevalent practice driven by the high cost of these beverages. Counterfeiters commonly dilute whisky with less expensive alcoholic beverages, water, food additives, drugs or pharmaceuticals. Paracetamol (PAR), an analgesic drug that mitigates hangovers and headaches, is commonly used to adulterate whisky. Currently, the primary method for quantifying PAR levels is high-performance liquid chromatography, but this technique is both time consuming and usually generates more residues. In this context, the utilization of miniaturized and portable analytical devices becomes imperative for conducting point-of-care/need analyses. These devices offer several advantages, including portability, user-friendliness, low cost, and minimal material wastage. This study proposes the selective distance-based PAR quantification on whisky samples using a paper-based microfluidic analytical device (μPAD). Colorimetric detection on paper-based platforms offers great benefits such as affordability, portability, and the ability to detect PAR without complicated instrumentation. The optimal detection conditions were achieved by introducing 5 μL of a mixture containing 7.5 mmol L-1 of Fe(III) and K3[Fe(CN)6] into the detection zone, along with 12 μL of whisky samples into the sample zone. The method exhibited linear behavior within the concentration range from 15 to 120 mg L-1, with a determination coefficient of 0.998. PAR was quantified in adulterated samples. The results obtained with the paper-based devices were compared with a referenced method, and no significant differences were observed at a confidence level of 95%. The μPAD allowed to determine ca. 1 drop of pharmaceutical medicine PAR of 200 mg mL-1 in 1 L of solution, demonstrating excellent sensitivity. This method offers cost-effective and rapid analysis, reducing the consumption of samples, reagents, and wastes. Consequently, it could be considered a viable and portable alternative for analyzing beverages at criminal scenes, customs, and police operations, thereby enhancing the field of forensics.

Smartphone as a Portable Detector for Thin-Layer Chromatographic Determination of Some Gastrointestinal Tract Drugs

Thin-layer chromatography (TLC) is an effective and simple technique for screening, evaluating, and quantifying low-quality and counterfeit pharmaceutical products. Smartphones have recently been used as accessible, cheap, and portable detectors that can replace more complicated analytical detectors. In this work, we have developed a simple and sensitive TLC method utilizing a smartphone charged-coupled device (CCD) camera not only to verify and quantify some gastrointestinal tract drugs, namely, loperamide hydrochloride (LOP) and bisacodyl (BIS), but also to detect acetaminophen (ACT) as a counterfeit drug. Both drugs (LOP and BIS) were chromatographed separately on a silica gel 60 F₂₅₄ plate as a stationary phase under previously reported chromatographic conditions, using ethyl acetate:methanol:ammonium hydroxide (24:3:1, by volume) and ethyl acetate:methanol:glacial acetic acid (85:10:5, by volume) as developing systems to determine LOP and BIS, respectively. Universal stains, namely, iodine vapors and vanillin, were used to visualize the spots on the TLC plates to get a visual image using the smartphone camera and a spotlight as an illumination source with no need for a UV illumination source. The spot intensity was calculated using a commercially available smartphone application for quantitative analysis of the studied drugs utilizing ″acetaminophen″ as an example of a counterfeit substance. R_f values were calculated using the recorded images and found to be 0.77, 0.79, and 0.74 for LOP, BIS, and ACT, respectively, providing drug identity. Linear calibration curves using the smartphone-TLC method were obtained between the luminance and the corresponding concentrations over the ranges of 2.00-10.00 μg/mL and 1.00-10.00 μg/mL with limits of detection of 0.57 and 0.10 μg/mL for LOP and BIS, respectively. The suggested method was validated according to the International Conference of Harmonization (ICH) guidelines. The method was then successfully applied for the qualitative and quantitative determination of LOP or BIS as an example for gastrointestinal tract drugs in pure form and in their pharmaceutical dosage formulations. The proposed method is considered as a perfect alternative to traditional reported densitometric methods due to its simplicity, easy application, and inexpensiveness. No previously reported methods utilizing smartphones have been published for the determination of the studied drugs. The developed approach is considered the first TLC method using smartphones for the determination of some gastrointestinal tract drugs in their pure form and in pharmaceutical formulations.

3D-printing for forensic chemistry: voltammetric determination of cocaine on additively manufactured graphene-polylactic acid electrodes

Cocaine is probably one of the most trafficked illicit drugs in the world. For this reason, police forces require fast, selective, and sensitive methods for cocaine detection at crime scenes. Taking benefit of additive manufacturing, we demonstrate that 3D-printed graphene-polylactic acid (G-PLA) electrodes using the affordable fused deposition modelling technique can identify and quantify cocaine in seized drugs. The detection of cocaine based on its electrochemical oxidation on such electrodes was dramatically improved after an electrochemical surface treatment that generates reduced graphene oxide (anodic followed by a cathodic treatment). Square-wave voltammetric determination of cocaine was achieved in the concentration range between 20 and 100 μmol L-1, with a detection limit of 6 μmol L-1, and free from the interference of paracetamol, caffeine, phenacetin, lidocaine, benzocaine and levamisole, which are common adulterants found in seized drugs. The analytical characteristics obtained using 3D-printed G-PLA electrodes were comparable with those of previously reported electrochemical sensors, but presented the inherent advantages of the 3D-printing technology that enables low-cost, reproducible, and large-scale production of such electrodes in remote areas combined with the use of an environmentally-friendly biopolymer.

Lead toxicity in Lucilia cuprina and electrochemical analysis: a simple and low-cost alternative for forensic investigation

Entomotoxicology allows the detection and analysis of substances such as poisons, drugs, and metals in necrophagous insects using analytical protocols. In a forensic situation related to death by gunshot, the gunshot residue (GSR) is dispersed at the crime scene and may be consumed by necrophagous insects. Lead (Pb) is the most abundant metal in GSR samples and it can be determined using non-portable methods. However, the toxicity effects of GSR samples on Lucilia cuprina (Diptera: Calliphoridae) and the detection of Pb via portable electrochemical methods have not been investigated. This study describes for the first time the toxicity analysis of Pb on immature L. cuprina through their survival rate and influence of Pb on immature development. In addition, the bioaccumulation of Pb in the larvae samples was determined based on square wave anodic stripping voltammetry (SWASV) measurements. The results revealed a low limit of detection to Pb (6.5 μg L^-1) and the analytical performance was satisfactory because it measures Pb levels in larvae exposed to a diet containing 50 μg Pb g^-1. Furthermore, the levels of Pb influenced the survival rate and development time of the immature L. cuprina. Larvae exposed to a high concentration of the metal (50 μg Pb g ^-1) showed statistically significant changes (p < 0.05). The presence of Pb in immature L. cuprina can be used to estimate the post-mortem interval; thus, the present study provides important information in forensic entomology.

Interpol review of controlled substances 2016-2019

This review paper covers the forensic-relevant literature in controlled substances from 2016 to 2019 as a part of the 19th Interpol International Forensic Science Managers Symposium. The review papers are also available at the Interpol website at: https://www.interpol.int/content/download/14458/file/Interpol%20Review%20Papers%202019.pdf.

Facile caffeine electrochemical detection via electrodeposited Ag nanoparticles with modifier polymers on carbon paste sensor at aqueous and micellar media

The analysis and detection of caffeine (Caf) is very useful due to its widespread usage in several daily consumed beverages, food products, and pharmacological preparations with various physiological effects. The preparation of a newly electrodeposited Ag nanoparticles – cellulose acetate phthalate (CAP) – chitosan (Chit) modified carbon paste (ACCMCP) sensor for sensitive determination of Caf in 0.01 mol L−1 H3PO4 solution (pH 1.0–5.0) both in aqueous and micellar media (0.5 mmol L−1 SDS) was achieved. The interaction of Caf was monitored using electrochemical techniques such as cyclic voltammetry, differential pulse voltammetry, electrochemical impedance spectroscopy, and chronoamperometry, and surface characterization was carried out using X-ray diffraction, scanning electron microscope, and energy dispersive X-ray techniques. The linear detection range of Caf was between 4 and 500 μmol L−1 (r2 = 0.955) and the limit of detection obtained from the calibration plot was 0.252 μmol L−1. The sensor was applicable for detecting Caf in numerous real samples with recoveries from 98.03% to 101.60% without interference of any accompanying species, which ensures high method selectivity.

Graphene Oxide: A Smart (Starting) Material for Natural Methylxanthines Adsorption and Detection

Natural methylxanthines, caffeine, theophylline and theobromine, are widespread biologically active alkaloids in human nutrition, found mainly in beverages (coffee, tea, cocoa, energy drinks, etc.). Their detection is thus of extreme importance, and many studies are devoted to this topic. During the last decade, graphene oxide (GO) and reduced graphene oxide (RGO) gained popularity as constituents of sensors (chemical, electrochemical and biosensors) for methylxanthines. The main advantages of GO and RGO with respect to graphene are the easiness and cheapness of synthesis, the notable higher solubility in polar solvents (water, among others), and the higher reactivity towards these targets (mainly due to - interactions); one of the main disadvantages is the lower electrical conductivity, especially when using them in electrochemical sensors. Nonetheless, their use in sensors is becoming more and more common, with the obtainment of very good results in terms of selectivity and sensitivity (up to 5.4 × 10-10 mol L-1 and 1.8 × 10-9 mol L-1 for caffeine and theophylline, respectively). Moreover, the ability of GO to protect DNA and RNA from enzymatic digestion renders it one of the best candidates for biosensors based on these nucleic acids. This is an up-to-date review of the use of GO and RGO in sensors.