An Overview on Electrochemical Determination of Cholesterol

A Sensitive Enzymatic Electrochemical Biosensor for Cholesterol Based on Cobalt Ferrite@Molybdenum Disulfide/Gold Nanoparticles

Cholesterol is essential in biological systems, and the level of cholesterol in the body of a person acts as a diagnostic marker for a variety of diseases. So, in this work, we fabricated an enzymatic electrochemical biosensor for cholesterol using cobalt ferrite@molybdenum disulfide/gold nanoparticles (CoFe2O4@MoS2/Au). The synthesized composite was used for the determination of cholesterol by voltametric methods. The electroactive material CoFe2O4@MoS2/Au was successfully verified from the physiochemical studies such as XRD, Raman, FT-IR, and XPS spectroscopy along with morphological FESEM and HRTEM characterization. CoFe2O4@MoS2/Au showed outstanding dispersion in the aqueous phase, a large effective area, good biological compatibility, and superior electronic conductivity. The microflower-like CoFe2O4@MoS2/Au was confirmed by scanning electron microscopy. The image of transmission electron microscopy showed decoration of gold nanoparticles on CoFe2O4@MoS2 surfaces. Furthermore, a one-step dip-coating technique was used to build the biosensor used for cholesterol detection. In addition to acting as an enabling matrix to immobilize cholesterol oxidase (ChOx), CoFe2O4@MoS2/Au contributes to an increase in electrical conductivity. The differential pulse voltammetry method was used for the quantitative measurement of cholesterol. The calibration curve for cholesterol was linear in the concentration range of 5 to 100 μM, with a low limit of detection of 0.09 μM and sensitivity of 0.194 μA μM-1 cm-2. Furthermore, the biosensor demonstrates good practicability, as it was also employed for identifying cholesterol in real samples with acceptable selectivity and stability.

Comprehensive Multi-Omic Evaluation of the Microbiota and Metabolites in the Colons of Diverse Swine Breeds

Pigs stand as a vital cornerstone in the realm of human sustenance, and the intricate composition of their intestinal microbiota wields a commanding influence over their nutritional and metabolic pathways. We employed multi-omic evaluations to identify microbial evidence associated with differential growth performance and metabolites, thereby offering theoretical support for the implementation of efficient farming practices for Tibetan pigs and establishing a robust foundation for enhancing pig growth and health. In this work, six Duroc × landrace × yorkshi (DLY) pigs and six Tibetan pigs were used for the experiment. Following humane euthanasia, a comprehensive analysis was undertaken to detect the presence of short-chain fatty acids (SCFAs), microbial populations, and metabolites within the colonic environment. Additionally, metabolites present within the plasma were also assessed. The outcomes of our analysis unveiled the key variables affecting the microbe changes causing the observed differences in production performance between these two distinct pig breeds. Specifically, noteworthy discrepancies were observed in the microbial compositions of DLY pigs, characterized by markedly higher levels of Alloprevotella and Prevotellaceae_UCG-003 (p < 0.05). These disparities, in turn, resulted in significant variations in the concentrations of acetic acid, propionic acid, and the cumulative SCFAs (p < 0.05). Consequently, the DLY pigs exhibited enhanced growth performance and overall well-being, which could be ascribed to the distinct metabolite profiles they harbored. Conversely, Tibetan pigs exhibited a significantly elevated relative abundance of the NK4A214_group, which consequently led to a pronounced increase in the concentration of L-cysteine. This elevation in L-cysteine content had cascading effects, further manifesting higher levels of taurine within the colon and plasma. It is noteworthy that taurine has the potential to exert multifaceted impacts encompassing microbiota dynamics, protein and lipid metabolism, as well as bile acid metabolism, all of which collectively benefit the pigs. In light of this, Tibetan pigs showcased enhanced capabilities in bile acid metabolism. In summation, our findings suggest that DLY pigs excel in their proficiency in short-chain fatty acid metabolism, whereas Tibetan pigs exhibit a more pronounced competence in the realm of bile acid metabolism. These insights underscore the potential for future studies to leverage these breed-specific differences, thereby contributing to the amelioration of production performance within these two distinct pig breeds.

p-Thiocresol Functionalized Cesium Lead Bromide (PTC@CsPbBr3): A Fluorometric Sensing Probe for the Detection of Cholesterol

Inorganic halide-based perovskites (e.g., cesium lead bromide) are tremendously useful semiconducting materials due to their unique optoelectronic properties. However, degradation of these perovskites under humid conditions is one of the major drawbacks to prevent their wide applications. Herein, passivated cesium lead bromide nanoparticles are synthesized using p-thiocresol as a passivating ligand, and this stable version of perovskite is later applied successfully as a sensor probe towards cholesterol detection. The designed sensor can detect cholesterol with a lower detection limit of 0.24 ppm and a fast response time of 10 s. The mechanism of quenching PTC@CsPbBr3 upon the gradual addition of cholesterol is discussed. Further, the sensor is successfully applied in the detection of cholesterol in real samples (blood serum). This work presents PTC@CsPbBr3 as a novel sensing platform for detecting cholesterol well in biomedical applications.

Facile immobilization of cholesterol oxidase on Pt,Ru-C nanocomposite and ionic liquid-modified carbon paste electrode for an efficient amperometric free cholesterol biosensing

In present work, the enzyme cholesterol oxidase (ChOx) was immobilized by Nafion® (Naf) on Pt,Ru-C nanocomposite and an ionic liquid (IL)-modified carbon paste electrode (CPE) in order to create cholesterol biosensor (Naf/ChOx/Pt,Ru-C/IL-CPE). The prepared working electrodes were characterized using scanning electron microscopy-energy-dispersive spectrometry, while their electrochemical performance was evaluated using electrochemical impedance spectroscopic, cyclic voltammetric, and amperometric techniques. Excellent synergism between IL 1-allyl-3-methylimidazolium dicyanamide ([AMIM][DCA]), Pt,Ru-C, and ChOx, as modifiers of CPE, offers the most pronounced analytical performance for improved cholesterol amperometric determination in phosphate buffer solution pH 7.50 at a working potential of 0.60 V. Under optimized experimental conditions, a linear relationship between oxidation current and cholesterol concentration was found for the range from 0.31 to 2.46 µM, with an estimated detection limit of 0.13 µM and relative standard deviation (RSD) below 5.5%. The optimized amperometric method in combination with the developed Naf/ChOx/Pt,Ru-C/IL-CPE biosensor showed good repeatability and high selectivity towards cholesterol biosensing. The proposed biosensor was successfully applied to determine free cholesterol in a human blood serum sample via its enzymatic reaction product hydrogen peroxide despite the presence of possible interferences. The percentage recovery ranged from 99.08 to 102.81%, while RSD was below 2.0% for the unspiked as well as the spiked human blood serum sample. The obtained results indicated excellent accuracy and precision of the method, concluding that the developed biosensor can be a promising alternative to existing commercial cholesterol tests used in medical practice.

Optimization of the tandem enzyme activity of V-MOF and its derivatives for highly sensitive nonenzymatic detection of cholesterol in living cells

It remains a great challenge to properly design and synthesize single-component artificial tandem enzymes for specific substrates with high selectivity. Herein, V-MOF is synthesized by solvothermal method and its derivatives are constructed via pyrolyzing V-MOF in nitrogen atmosphere at different temperatures, which are denoted as V-MOF-y (y = 300, 400, 500, 700 and 800). V-MOF and V-MOF-y possess tandem enzyme-like activity, i.e. cholesterol oxidase-like and peroxidase-like activity. Among them, V-MOF-700 shows the strongest tandem enzyme activity for V-N bonds. Based on the cascade enzyme activity of V-MOF-700, the nonenzymatic detection platform for cholesterol by fluorescent assay can be established in the presence of o-phenylenediamine (OPD) for the first time. The detection mechanism is that V-MOF-700 catalyzes cholesterol to generate hydrogen peroxide and further form hydroxyl radical (•OH), which can oxidize OPD to obtain oxidized OPD (oxOPD) with yellow fluorescence. The linear detection of cholesterol ranges of 2-70 μM and 70-160 μM with a lower detection limit of 0.38 μM (S/N = 3) are obtained. This method is used to detect cholesterol in human serum successfully. Especially, it can be applied to the rough quantification of membrane cholesterol in living tumor cells, indicating that it has the potential for clinical application.

Label-free and selective cholesterol detection based on multilayer functional structure coated fiber fabry-perot interferometer probe

A reflective fiber-optic Fabry-Perot cavity probe sensor is proposed to selectively measure cholesterol concentration by insert single mode fiber into ceramic tube and immobilize epoxy resin (ER)/graphene oxide (GO)/beta-cyclodextrin (β-CD) multi-layer film onto end face of ceramic tube. EDC/NHS activated GO is selected to form chemical binding with β-CD, and β-CD is the sensitive materials to bind with cholesterol molecules. With multi-layer film assisted, the sensitivity of sensor to cholesterol concentration can reach 3.92 nm/mM and the limit of detection reaches 3.48 μ M. In addition, 4 mM hemoglobin, glucose and ascorbic acid are doped into a set cholesterol sample and verified the highly selectivity of sensing cholesterol. Furthermore, the reproducibility was proved by measure the spectrum of four sensors with same fabrication process, and the reusability was also proved by repeated measurements. Overall, the sensor features with high mechanical strength, ease of fabrication, real-time monitoring, low cost and ease for measurement that given by probe structure. Therefore, the sensor provides a remarkable analytical platform for biosensing applications.

Electrochemical devices for cholesterol detection

Cholesterol can be considered as a biomarker of illnesses such as heart and coronary artery diseases or arteriosclerosis. Therefore, the fast determination of its concentration in blood is interesting as a means of achieving an early diagnosis of these unhealthy conditions. Electrochemical sensors and biosensors have become a potential tool for selective and sensitive detection of this biomolecule, combining the analytical advantages of electrochemical techniques with the selective recognition features of modified electrodes. This review covers the different approaches carried out in the development of electrochemical sensors for cholesterol, differentiating between enzymatic biosensors and non-enzymatic systems, highlighting lab-on-a-chip devices. A description of the different modification procedures of the working electrode has been included and the role of the different functional materials used has been discussed.

Label-Free Myoglobin Biosensor Based on Pure and Copper-Doped Titanium Dioxide Nanomaterials

In this study, using pure and copper-doped titanium dioxide (Cu-TiO₂) nanostructures as the base matrix, enzyme-less label free myoglobin detection to identify acute myocardial infarction was performed and presented. The Cu-TiO₂ nanomaterials were prepared using facile sol-gel method. In order to comprehend the morphologies, compositions, structural, optical, and electrochemical characteristics, the pure and Cu-TiO₂ nanomaterials were investigated by several techniques which clearly revealed good crystallinity and high purity. To fabricate the enzyme-less label free biosensor, thick films of synthesized nanomaterials were applied to the surface of a pre-fabricated gold screen-printed electrode (Au-SPE), which serves as a working electrode to construct the myoglobin (Mb) biosensors. The interference study of the fabricated biosensor was also carried out with human serum albumin (HSA) and cytochrome c (cyt-c). Interestingly, the Cu-doped TiO₂ nanomaterial-based Mb biosensor displayed a higher sensitivity of 61.51 µAcm^-2/nM and a lower detection limit of 14 pM with a response time of less than 10 ms.

Radix Pueraria Flavonoids Assisted Green Synthesis of Reduced Gold Nanoparticles: Application for Electrochemical Nonenzymatic Detection of Cholesterol in Food Samples

Using radix pueraria flavonoids (RPFs) as a reducing and stabilizing agent, we report a simple, cost-effective, and ecologically friendly green synthesis technique for gold nanoparticles (AuNPs) in the present study. Ultraviolet-visible (UV) spectroscopy, transmission electron microscopy (TEM), Fourier transform infrared (FTIR), and X-ray diffraction (XRD) investigations were used to characterize the AuNPs. The results demonstrated that the produced AuNPs were nearly spherical and that their particle sizes had a mean diameter of 4.85 ± 0.75 nm. The "Green" AuNPs, exhibiting remarkable peroxidase-like activity and Michaelis-Menten kinetics with high affinity for H₂O₂ and 3,3',5,5'-tetramethylbenzidine (TMB), were effectively applied to the fabrication of a sensitive nonenzymatic enhanced electrochemical sensor for the detection of cholesterol (Cho). Under optimum circumstances, it was possible to establish two linear ranges of 1-100 and 250-5000 μmol/L with a detection limit of 0.259 μmol/L (signal/noise ratio (S/N) = 3). The suggested sensor was utilized with satisfactory findings to determine the amount of Cho in food samples.

Emerging Trends in Non-Enzymatic Cholesterol Biosensors: Challenges and Advancements

The development of a highly sensitive and selective non-enzymatic electrochemical biosensor for precise and accurate determination of multiple disease biomarkers has always been challenging and demanding. The synthesis of novel materials has provided opportunities to fabricate dependable biosensors. In this perspective, we have presented and discussed recent challenges and technological advancements in the development of non-enzymatic cholesterol electrochemical biosensors and recent research trends in the utilization of functional nanomaterials. This review gives an insight into the electrochemically active nanomaterials having potential applications in cholesterol biosensing, including metal/metal oxide, mesoporous metal sulfide, conductive polymers, and carbon materials. Moreover, we have discussed the current strategies for the design of electrode material and key challenges for the construction of an efficient cholesterol biosensor. In addition, we have also described the current issues related to sensitivity and selectivity in cholesterol biosensing.

Non-enzymatic electrochemical determination of cholesterol in dairy products on boron-doped diamond electrode

Determination of cholesterol in food matrices is essential for quality control concerning the health of consumers. Herein, a simple electrochemical approach for cholesterol quantitation in dairy products is evaluated. The newly developed differential pulse voltammetric method using acetonitrile-perchloric acid mixture as a supporting electrolyte is statistically compared to GC-MS and HPLC-UV. Oxidation signals of cholesterol at +1.5 V and +1.4 V (vs. Ag/AgNO₃ in acetonitrile) provide detection limits of 4.9 µM and 6.1 µM on boron-doped diamond and glassy carbon electrodes, respectively. A simple liquid-liquid extraction procedure from dairy products into hexane resulted in a recovery rate of (74.8 ± 3.8)%. The method provides results in close agreement (at a 95% confidence level) with GC-MS, while HPLC-UV resulted in a significant difference in estimated cholesterol concentrations for all samples. This newly developed method is a simpler, faster and cheaper alternative to instrumentally demanding MS-based methods and clearly outperforms HPLC-UV.

Innovative Non-Enzymatic Electrochemical Quantification of Cholesterol

The use of the Liebermann–Burchard reaction in this study has been explored in the development of a simple, reliable, and robust quantitative electrochemical method to assay cholesterol, and hence provide a good alternative to colorimetric methods. The optimization of batch mode operation for electrochemical oxidation of cholesterol in the Liebermann–Burchard reagents included the applied potential and acidic volume. Tested using chronoamperometry, the developed method showed a high sensitivity (14.959 μA mM⁻¹) and low detection limit (19.78 nM) over a 0.025–3 mM concentration range, with remarkable linearity (R² = 0.999), proving an analytical performance either higher or comparable to most of the cholesterol sensors discussed in literature. The influence of possible interfering bioactive agents, namely, glucose, uric acid, ascorbic acid, KCl and NaCl, has been evaluated with no or negligible effects on the measurement of cholesterol. Our study was directed at finding a new approach to chemical processing arising from the use of external potential as an additional level of control for chemical reactions and the transfer of electrons between surfaces and molecules. Finally, the optimized method was successfully applied for the determination of cholesterol content in real blood samples.

Hollow spheres of iron oxide as an “enzyme-mimic”: preparation, characterization and application as biosensors

Nanostructured hollow spheres of iron oxide are demonstrated as “nanozymes” for the dual mode (spectrophotometric and electrochemical) detection of hydrogen peroxide & cholesterol biomarkers and a novel electrochemical sensing mechanism is proposed.

Ultrasensitive electrochemical biosensors for dopamine and cholesterol: recent advances, challenges and strategies

The rapid and accurate determination of the dopamine (neurotransmitter) and cholesterol level in bio-fluids is significant because they are crucial bioanalytes for several lethal diseases, which require early diagnosis. The level of DA in the brain is modulated by the dopamine active transporter (DAT), and is influenced by cholesterol levels in the lipid membrane environment. Accordingly, electrochemical biosensors offer rapid and accurate detection and exhibit unique features such as low detection limits even with reduced volumes of analyte, affordability, simple handling, portability and versatility, making them appropriate to deal with augmented challenges in current clinical and point-of-care diagnostics for the determination of dopamine (DA) and cholesterol. This feature article focuses on the development of ultrasensitive electrochemical biosensors for the detection of cholesterol and DA for real-time and onsite applications that can detect targeted analytes with reduced volumes and sub-picomolar concentrations with quick response times. Furthermore, the development of ultrasensitive biosensors via cost-effective, simple fabrication procedures, displaying high sensitivity, selectivity, reliability and good stability is significant in the impending era of electrochemical biosensing. Herein, we emphasize on recent advanced nanomaterials used for the ultrasensitive detection of DA and cholesterol and discuss in depth their electrochemical activities towards ultrasensitive responses. Key points describing future perspectives and the challenges during detection with their probable solutions are discussed, and the current market is also surveyed. Further, a comprehensive review of the literature indicates that there is room for improvement in the miniaturization of cholesterol and dopamine biosensors for lab-on-chip devices and overcoming the current technical limitations to facilitate full utilization by patients at home.

Sensitive electrochemical detection of cholesterol using a portable paper sensor based on the synergistic effect of cholesterol oxidase and nanoporous gold

As a crucial biomarker for some diseases, the determination of cholesterol in human serum is of great significance for the diagnosis and prevention of these diseases. Hence, a portable cholesterol detection method is necessary for clinical and domestic applications. Here, a portable paper sensor was designed for cholesterol detection by modifying screen-printed electrode (SPE) with nanoporous gold (NPG). To achieve the reliable cholesterol detection, a synergistic strategy was proposed based on the oxidation of cholesterol by cholesterol oxidase (ChOx) and the reduction of oxidation product (H₂O₂) by NPG. Compared to existing electrochemical sensors, the resulting paper sensor exhibited a wider linear response in a range from 50 μM to 6 mM as well as a higher sensitivity of 32.68 μA mM^-1 cm^-2 with a lower detection limit of 8.36 μM. Moreover, the portable paper sensor presented strong anti-interference capability and stability in the detection of cholesterol in human serum, and the data detected by the portable paper sensor were consistent with that obtained by an automatic biochemical analyzer. These unique performances confirmed that the proposed paper sensor was a sensitive, reliable, and portable cholesterol detection method, making it a good choice for cholesterol detection.

Non-enzymatic electrochemical cholesterol sensor based on strong host-guest interactions with a polymer of intrinsic microporosity (PIM) with DFT study

Advances in materials science have accelerated the development of diagnostic tools with the last decade witnessing the development of enzyme-free sensors, owing to the improved stability, low cost and simple fabrication of component materials. However, the specificity of non-enzymatic sensors for certain analytes still represents a challenging task, for example the determination of cholesterol level in blood is vital due to its medical relevance. In this work, a reagent displacement assay for cholesterol sensing in serum samples was developed. It is based on coating of a glassy carbon electrode with a polymer of intrinsic microporosity (PIM) that forms a host-guest complex with methylene blue (MB). In the presence of cholesterol, the MB electroactive probe was displaced due to the stronger association of cholesterol guest to the PIM host. The decrease in the oxidative current was proportional to the cholesterol concentration achieving a detection limit of approximately 0.1 nM. Moreover, to further assist the experimental studies, comprehensive theoretical calculations are also performed by using density functional theory (DFT) calculations.

MXene-based enzymatic sensor for highly sensitive and selective detection of cholesterol

In this work, the synthesized MXene (Ti₃C₂T_x) exhibited large specific area, biocompatibility, excellent electronic conductivity, and good dispersion in aqueous phase. The Chit/ChOx/Ti₃C₂T_x nanocomposite was prepared through the continuous self-assembled process. Its structure is characterized by scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and differential pulse voltammetry (DPV). Moreover, the biosensor for cholesterol detection was fabricated via a one-step dip-coating method. Chit andTi₃C₂T_x act as a support matrix to immobilize ChOx enzyme, and also play a role in increasing the electrical conductivity. Meanwhile, the addition of redox mediator (Fe(CN)₆^3-/4-) facilitates the electron transport from the analyte to the modified electrode in the oxidation of cholesterol. The DPV response exhibited an increase in current with increasing cholesterol concentration. Under the optimum conditions, the DPV response of the biosensor indicated a good linear relationship with the concentration of cholesterol ranging from 0.3 to 4.5 nM with a low detection limit of 0.11 nM, and a high sensitivity of 132.66 μA nM^-1 cm^-2. In addition, with favorable selectivity and stability, the biosensor has been used to detect cholesterol in real samples and the results demonstrate that the biosensor has excellent practicability.

Review-Recent Advances in FSCV Detection of Neurochemicals via Waveform and Carbon Microelectrode Modification

Fast scan cyclic voltammetry (FSCV) is an analytical technique that was first developed over 30 years ago. Since then, it has been extensively used to detect dopamine using carbon fiber microelectrodes (CFMEs). More recently, electrode modifications and waveform refinement have enabled the detection of a wider variety of neurochemicals including nucleosides such as adenosine and guanosine, neurotransmitter metabolites of dopamine, and neuropeptides such as enkephalin. These alterations have facilitated the selectivity of certain biomolecules over others to enhance the measurement of the analyte of interest while excluding interferants. In this review, we detail these modifications and how specializing CFME sensors allows neuro-analytical researchers to develop tools to understand the neurochemistry of the brain in disease states and provide groundwork for translational work in clinical settings.

Recent Development in Nanomaterial-Based Electrochemical Sensors for Cholesterol Detection

Functional nanomaterials have attracted significant attention in a variety of research fields (in particular, in the healthcare system) because of the easily controllable morphology, their high chemical and environmental stability, biocompatibility, and unique optoelectronic and sensing properties. The sensing properties of nanomaterials can be used to detect biomolecules such as cholesterol. Over the past few decades, remarkable progress has been made in the production of cholesterol biosensors that contain nanomaterials as the key component. In this article, various nanomaterials for the electrochemical sensing of cholesterol were reviewed. Cholesterol biosensors are recognized tools in the clinical diagnosis of cardiovascular diseases (CVDs). The function of nanomaterials in cholesterol biosensors were thoroughly discussed. In this study, different pathways for the sensing of cholesterol with functional nanomaterials were investigated.