On the efficiency of methylene blue versus persulfate catalysis of polyacrylamide gels, as investigated by capillary zone electrophoresis

Unprecedented Acid-Promoted Polymerization and Gelation of Acrylamide: A Serendipitous Discovery

Dilute acid polymerizes degassed, aqueous acrylamide with concomitant gelation, without the need for added free radical initiator or cross-linking agent. This reaction is accelerated by sonication or UV irradiation, but inhibited by adventitious oxygen or the addition of a free radical inhibitor, suggesting an acid-accelerated free radical process. The resulting hydrogels are thixotropic in nature and partially disrupted by the addition of chaotropic agents, indicating the importance of hydrogen bonding to the 3D network. This discovery was made while trying to prepare pectin-polyacrylamide hydrogels. We observed that pectin initiated the gelation of acrylamide, but only if the aqueous pectin samples had a pH lower than ca. 5.

Power and limitations of electrophoretic separations in proteomics strategies

Proteomics can be defined as the large-scale analysis of proteins. Due to the complexity of biological systems, it is required to concatenate various separation techniques prior to mass spectrometry. These techniques, dealing with proteins or peptides, can rely on chromatography or electrophoresis. In this review, the electrophoretic techniques are under scrutiny. Their principles are recalled, and their applications for peptide and protein separations are presented and critically discussed. In addition, the features that are specific to gel electrophoresis and that interplay with mass spectrometry (i.e., protein detection after electrophoresis, and the process leading from a gel piece to a solution of peptides) are also discussed.

Use of thiourea to increase the solubility of membrane proteins in two-dimensional electrophoresis

The separation of membrane proteins by high-resolution two-dimensional electrophoresis was carried out. At high loads, these proteins are prone to precipitation, resulting in poor resolution. It is shown here that the use of thiourea, previously described for focusing in immobilized pH gradients, can be extended to conventional isoelectric focusing. As thiourea inhibits acrylamide polymerization, a modified photopolymerization system must be used. These modifications result in higher solubility of proteins during IEF, thereby increasing the resolution and capacity of the two-dimensional gels.

Do DNA gel electrophoretic mobilities extrapolate to the free-solution mobility of DNA at zero gel concentration?

The electrophoresis of small DNA fragments has been measured in dilute agarose and polyacrylamide gels cast and run in Tris-acetate-EDTA (TAE) and Tris-borate-EDTA (TBE) buffers. Ferguson plots were constructed to extrapolate the mobilities to zero gel concentration and estimate the free solution mobility of DNA. In polyacrylamide gels, in both TAE and TBE buffers, the extrapolated mobilities at zero gel concentration increased gradually with decreasing DNA molecular weight, went through a maximum at approximately 60 bp, and then decreased again. The increase in the extrapolated mobilities with decreasing molecular weight observed for DNA fragments > or = 60 bp can be attributed to transient interactions between the migrating DNA molecules and the polyacrylamide gel fibers. If such interactions are eliminated by extrapolating the mobilities to both zero gel concentration and zero DNA molecular weight, the apparent free solution mobility of DNA is found to be 3.1 x 10(-4) cm2 V(-1) s(-1) in TAE buffer and 4.2 x 10(-4) cm2 V(-1) s(-1) in TBE buffer at 20 degrees C, reasonably close to the actual free solution mobilities measured in the same two buffers by capillary electrophoresis (N. C. Stellwagen et al., Biopolymers 1997, 42, 687-703). The significantly larger electrophoretic mobility observed in TBE buffer is most likely due to the formation of nonspecific, highly charged deoxyribose-borate complexes in this buffer medium. For DNA molecules < or = 60 bp in size, the decrease in the extrapolated mobilities with decreasing molecular weight parallels the decrease in their free solution mobilities observed by capillary electrophoresis. In agarose gels, the extrapolated mobilities of small DNA molecules at zero gel concentration appear to be independent of molecular weight. The apparent free solution mobilities are found to be (3.0 +/- 0.1) x 10(-4) cm2 V(-1) s(-1) in TAE buffer and (3.2 +/- 0.1) x 10(-4) cm2 V(-1) s(-1) in TBE buffer. The very similar mobilities observed in the two buffer media suggest that the borate ions in TBE buffer primarily form complexes with the galactose residues in the agarose gel fibers, rather than with the migrating DNA molecules, because of mass action effects. The formation of borate-agarose complexes, increasing the net negative charge of the agarose gel fibers, appears to be responsible for the markedly increased electroendosmotic flow observed in agarose gels cast and run in TBE buffer (N. C. Stellwagen, Electrophoresis 1992, 13, 601-603).

Electrophoresis gel media: the state of the art

Some unique events have occurred in the last few years which might revolutionize the field of polyacrylamide gel electrophoresis. While it was widely recognized that such matrices could normally be cast with a small pore size distribution, typically of the order of a few nanometers diameter (for protein sieving), recent developments suggest that "macroporous" gels could also be produced in the domain of polyacrylamides. If constraints to chain motion are imposed during gel polymerization, large-pore structures can be grown. Such constraints can originate either from low temperatures or from the presence of preformed polymers in the gelling solution; in both cases, the growing chains are forced to "laterally aggregate" via inter-chain hydrogen bond formation. Upon consumption of pendant double bonds, such bundles are frozen in the three-dimensional space by permanent cross-links. As an additional development, a novel photopolymerization system is described, comprising a cationic dye (methylene blue) and a redox couple (sodium toluene sulfinate, a reducer, and diphenyliodonium chloride, a mild oxidizer). Methylene blue catalysis is characterized by a unique efficiency, ensuring >96% conversion of monomers, even in hydro-organic solvents and in the presence of surfactants, which normally quench or completely inhibit the persulphate-driven reaction. In addition, methylene blue-sustained photopolymerization can be operated in the entire pH 3-10 interval, where most other systems fail. Perhaps the most striking novelty in the field is the appearance of a novel monomer (N-acryloylaminopropanol, AAP) coupling a high hydrophilicity with a unique resistance to alkaline hydrolysis. Given the fact that a poly(AAP) matrix is 500 times more stable than a poly(acrylamide) gel, while being twice as hydrophilic, it is anticipated that this novel chemistry will have no difficulties in replacing the old electrophoretic anticonvective media. The review ends with a glimpse at novel sieving media in capillary zone electrophoresis: polymer networks. Such media, by providing an almost infinite range of pore sizes, due to the absence of a rigid support, allow sieving mechanisms to be operative over a wide interval of particle sizes, even up to genomic DNA. Viscous solutions of polymer networks, made with the novel poly(AAP) chemistry, allow repeated use of the same separation column, well above 50 injections. Silica-bound poly(AAP) chains provide effective quenching of electroosmosis and >200 analyses by isoelectric focusing.

Micropreparative one- and two-dimensional electrophoresis: improvement with new photopolymerization systems

To improve the efficiency of one- and two-dimensional electrophoresis for micropreparative purposes, the use of gels polymerized with other initiators than the standard N,N,N',N'-tetramethylethylenediamine (TEMED)/persulfate systems for sodium dodecyl sulfate electrophoresis has been investigated. We show here that the recently described photoinitiator system, composed of methylene blue, toluene sulfinate and diphenyliodonium chloride, leads to a decreased resolution. Resolution can be restored if methylene blue is replaced by riboflavin. Two-dimensional electrophoresis with mg loadings of proteins has also been evaluated with these systems. Independently of the polymerization system, resolution for the first dimension is low with rod gels, increases with gel strips and is further improved when immobilized pH gradients are used. Here too, only the riboflavin/sulfinate/iodonium system results in a resolution that matches the one obtained with the standard TEMED/persulfate system. Gels polymerized with the riboflavin/sulfinate/iodonium system yield better results upon N-terminal microsequencing after blotting than gels polymerized with the standard TEMED/persulfate system.

Spatial and temporal depletion of ions from noncrosslinked denaturing polyacrylamide in capillary electrophoresis

Electrical conductivity across a polyacrylamide-filled capillary decreases during the separation of DNA sequencing fragments. This conductivity decrease is localized to the first few centimeters at the injection (negative) end of the capillary; no conductivity change is noted at the detection (positive) end of the capillary. The zone of decreased conductivity extends further into the capillary as the separation proceeds. The zone is most important for freshly prepared capillaries; capillaries used nine days after polymerization generate an insignificant current drop. The data are consistent with ionic depletion due to differences in transport numbers between the separation medium and the buffer reservoirs.

Is gravity on our way? The case of polyacrylamide gel polymerization

Potential gravity-induced deformations of polyacrylamide matrices during gelling were investigated in two different initiator systems based on (i) photopolymerization with 100 microM methylene blue, 1 mM sodium toluene sulfinate (reducer) and 50 microM diphenyliodonium chloride (oxidizer) (photopolymerization) and (ii) chemical polymerization, utilizing the standard persulfate N,N,N',N'-tetramethylethylenediamine. In both systems, it is seen that convective flows are imprinted in the final gel structure above a critical gelling layer thickness, set at ca. 3 mm. In both systems, progressive increments of the solution density, from normodense (density = 1.0) up to isodense with the growing polymer chains (density = 1.3) do not inhibit the appearance of strong convective flows. However, gel inhomogeneities are completely abolished even in 10 mm gelling layers if polymerization is performed in presence of density gradients, notably of sucrose, from 0 to 20%, 0 to 40% and 0 to 60%. Even the shallower gradient (0-20% sucrose) is able to completely abolish convective flows in persulfate-driven polymerization. It is hypothesized that such disturbances are not created by sedimentation of the growing polymer chains in the gravitational field, but are produced by the reaction exothermality, which produces strong buoyancy-driven flows. It is additionally demonstrated that persulfate polymerization is sensitive to oxygen absorbed from the top liquid layers, which should be carefully protected by an overlay of organic solvent. Methylene blue-induced polymerization appears to offer a series of unique advantages over chemical initiation with persulfate.

Gel polymerization in detergents: conversion efficiency of methylene blue vs. persulfate catalysis, as investigated by capillary zone electrophoresis

Four types of detergents are commonly used in biochemical analysis of proteins and polypeptides: neutral, e.g., Triton X-100, Nonidet P-40; anionic, typically sodium dodecyl sulfate (SDS); cationic, e.g., cetyltrimethylammonium bromide CTAB), and zwitterionic, e.g., sulfobetaine 3-12 and 3[(3-cholamido-propyl) dimethyl-ammonio]-1-propane sulfonate (CHAPS). These detergents are utilized not only in the protein solubilization step, but also in the polyacrylamide gel matrix in which subsequent electrophoretic separation is carried out. The conversion efficiency of monomers into the growing polymer, in the presence of the four types of detergents, was assessed by capillary zone electrophoresis (CZE) in a micellar system comprising 100 mM SDS, by extracting unreacted monomers from the gel phase and quantifying the peaks separated by CZE. Two different catalyst systems were evaluated: the standard persulfate-N,N,N',N'-tetramethylethylenediamine (TEMED) couple and a mixture comprising methylene blue in presence of the redox couple sodium toluene sulfinate and diphenyliodonium chloride. In the chemically initiated system (persulfate), there was a strong inhibition of polymerization, decreasing in the following order: CTAB > sulfobetaine 3-12 > SDS > CHAPS > Triton X-100 (e.g., in 10 mM CTAB 100% inhibition was experienced). On the contrary, in photopolymerization (as driven by methylene blue) good conversion of monomers into the growing polymer (> 95%) was always obtained, independent of the nature of the detergent present in the polymerization step.(ABSTRACT TRUNCATED AT 250 WORDS)