Enantioseparation of amino acids and dipeptides using vancomycin as chiral selector in capillary electrophoresis

Fe3O4@SiO2@VAN Nanoadsorbent Followed by GC-MS for the Determination of Polycyclic Aromatic Hydrocarbons at Ultra-Trace Levels in Environmental Water Samples

In the present study, silica-coated magnetic nanoparticles functionalized with vancomycin (Fe₃O₄@SiO₂@VAN) were synthesized. The Fe₃O₄@SiO₂@VAN nanocomposite was used as a sorbent for the magnetic solid-phase extraction (MSPE) of polycyclic aromatic hydrocarbons (PAHs) from environmental water, followed by GC-MS. The nanocomposite was characterized by Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, vibrating sample magnetometry, and nitrogen sorption. Various experimental parameters were optimized, including extraction condition and desorption condition. Results show that Fe₃O₄@SiO₂@VAN combined the advantages of nanomaterials and magnetic separation technology, showing excellent dispersibility and high selectivity for PAHs in environmental water sample. Under the optimal extraction conditions, an analytical method was established with the sensitive limit of detection (LOD) of 0.03-0.16 μg L^-1. The method was successfully applied for the analysis of environmental water samples. The relative standard deviations (%) were in the range of 0.50-12.82%, and the extraction recovery (%) was in the range of 82.48% and 116.32%. MSPE-coupled gas chromatography-mass spectrometry quantification of PAHs is an accurate and repeatable method for the monitoring of PAH accumulation in environmental water samples. It also provides an effective strategy for the tracing and quantification of other environmental pollutants in complex samples.

Chiral capillary electrophoresis with UV-excited fluorescence detection for the enantioselective analysis of 9-fluorenylmethoxycarbonyl-derivatized amino acids

The potential of capillary electrophoresis (CE) with ultraviolet (UV)-excited fluorescence detection for sensitive chiral analysis of amino acids (AAs) was investigated. DL-AAs were derivatized with 9-fluorenylmethoxycarbonyl chloride (FMOC)-Cl to allow their fluorescence detection and enhance enantioseparation. Fluorescence detection was achieved employing optical fibers, leading UV excitation light (< 300 nm) from a Xe-Hg lamp to the capillary window, and fluorescence emission to a spectrograph equipped with a charge-coupled device (CCD). Signal averaging over time and emission wavelength intervals was carried out to improve the signal-to-noise ratio of the FMOC-AAs. A background electrolyte (BGE) of 40 mM sodium tetraborate (pH 9.5), containing 15% isopropanol (v/v), 30 mM sodium dodecyl sulfate (SDS), and 30 mM β-cyclodextrin (β-CD), was found optimal for AA chemo- and enantioseparation. Enantioresolutions of 1.0 or higher were achieved for 16 proteinogenic DL-AAs. Limits of detection (LODs) were in the 10-100-nM range (injected concentration) for the D-AA enantiomers, except for FMOC-D-tryptophan (536 nM) which showed intramolecular fluorescence quenching. Linearity (R² > 0.997) and repeatability for peak height (relative standard deviations (RSDs) < 7.0%; n = 5) and electrophoretic mobility (RSDs < 0.6%; n = 5) of individual AA enantiomers were established for chiral analysis of DL-AA mixtures. The applicability of the method was investigated by the analysis of cerebrospinal fluid (CSF). Next to L-AAs, endogenous levels of D-glutamine and D-aspartic acid could be measured in CSF revealing enantiomeric ratios of 0.35 and 19.6%, respectively. This indicates the method's potential for the analysis of low concentrations of D-AAs in presence of abundant L-AAs.

Enantiomeric resolution of multiple chiral centres racemates by capillary electrophoresis

Enantiomeric resolution of multichiral centre racemates is an important area as some multichiral centre racemates are of great medicinal importance. However, enantioseparation of such types of racemates is a challenging task. Amongst many analytical techniques, capillary electrophoresis is a powerful technique and may be used to resolve such racemates. Only few papers are available describing enantiomeric resolution of such racemates. Therefore, efforts have been made to describe the enantiomeric resolution of multichiral centre racemates by capillary electrophoresis. This article discusses the importance of multichiral racemates, the need for capillary electrophoresis in enantiomeric resolution and chiral resolution of multichiral centre racemates using various chiral selectors. Further, attempts have been made to discuss the future challenges and prospects of enantiomeric resolution of multichiral racemates. The various chiral selectors used for the purpose are chiral crown ether, cyclodextrins, polysaccharides, macrocyclic glycopeptide antibiotics and ligand exchange.

Potential of vancomycin for the enantiomeric resolution of FMOC-amino acids by capillary electrophoresis-ion-trap-mass spectrometry

The potential of the antibiotic vancomycin (VC) as chiral selector for the enantiomeric separation of amino acids by CE-ESI-MS/MS² was investigated for the first time in this work. Derivatization of amino acids with FMOC-Cl was carried out to enable their interaction with VC as well as the formation of precursor ions with larger m/z which were employed in MS² experiments. The partial filling of a coated capillary was employed to avoid the loss in MS sensitivity originated by the introduction of VC in the ionization source. Under optimized conditions, the simultaneous enantiomeric separation and unequivocal identification of 17 amino acids (two of them being nonprotein amino acids) took place in about 20 min with LODs in the micromolar range.

Application of antibiotics as chiral selectors for capillary electrophoretic enantioseparation of pharmaceuticals: a review

Recent years have witnessed several new trends in chiral separation, for example, the enantiorecognition ability of several new antibiotics has been explored using capillary electrophoresis (CE) prior to HPLC; antibiotics have been employed as chiral selectors (CSs) in a nonaqueous CE (NACE) mode; and several new detection techniques (namely, capacitively coupled contactless conductivity detection) have been used in combination with CE for quantification of enantiomers. On account of these emerging trends, this article aims to review the application of various classes of antibiotics for CE enantioseparation of pharmaceuticals. A detailed account of the basic factors affecting enantioseparation, certain limitations of antibiotics as CSs and strategies to mitigate them, and advantages of NACE while using antibiotics as CSs has also been presented.

Use of macrocyclic antibiotics as the chiral selectors in capillary electrophoresis

Macrocyclic antibiotics, especially vancomycin, represent a class of versatile chiral selectors for enantioseparations by capillary electrophoresis (CE). In this chapter, we describe the protocol for performing CE enantioseparations with vancomycin as the chiral selector. Dynamic coating of the capillary with polymers including the positively charged polyelectrolyte hexadimethrine bromide or electro-neutral poly(dimethylacrylamide) proved to be very useful in order to reduce the adsorption of vancomycin onto the capillary wall resulting in an improved separation efficiency. The partial filling technique is employed for improvement of the detection sensitivity. Utilization of these techniques makes the CE enantioseparation with vancomycin more practical and robust.

Enantioseparation of dansyl amino acids by HPLC on a monolithic column dynamically coated with a vancomycin derivative

In this work a chiral stationary phase was prepared by dynamically coating a monolithic reversed-phase HPLC column with a vancomycin-derivative as chiral selector. A hydrophobic alkyl-chain was attached to the vancomycin molecule, providing the immobilization of the chiral selector on the reversed-phase material. Dansyl amino acids were chosen as model analytes for testing the separation power of the dynamically coated phase. All investigated compounds were separated into their enantiomers. Compared with a conventionally packed vancomycin-CSP, a reversal of the enantiomer elution order was obtained.

The first contribution of capillary electrophoresis to the study of abiotic origins of homochirality: investigation of the enantioselective adsorption of 3-carboxy adipic acid on minerals

CE with UV detection was used for the first time to determine the enantioselective adsorption of the short-chain tricarboxylic acid, 3-carboxy adipic acid, on minerals as a mean of investigating plausible mechanisms for the origin of biochemical homochirality on Earth. The use of vancomycine as chiral selector in the separation buffer using the partial filling technique enabled the separation of the two enantiomers of this organic acid in about 12 min. Taking into account that this compound has a low absorption of the UV light, and in order to achieve the sensitivity needed to determine the enantiomeric excess of samples of 3-carboxy adipic acid adsorbed on minerals, we applied a strategy consisting of a field-amplified sample stacking together with the use of a bubble capillary and detection at low wavelength (192 nm). This combination enabled an LOD of about 10(-7) M and the determination of the enantiomeric excess of 3-carboxy adipic acid adsorbed on calcite and feldspar mineral samples at subnanomol levels of this acid. Results showed that an enantioselective adsorption of the enantiomers of 3-carboxy adipic acid on minerals took place.

Chiral capillary electrophoretic separation of amino acids derivatized with 9-fluorenylmethylchloroformate using mixed chiral selectors of beta-cyclodextrin and sodium taurodeoxycholate

Chiral separation of 19 pairs of amino acid (AA) enantiomers derivatized with 9-fluorenylmethylchloroformate (FMOC) was successfully conducted by capillary electrophoresis using the mixture of beta-CD and sodium taurodeoxycholate (STDC) as selectors. Resolution was considerably superior to that obtained by using either beta-CD or STDC alone. After a systematic inspection, a buffer composed of 150 mM borate and 18% v/v isopropanol at pH 8.0, dissolved with 30 mM beta-CD and 30 mM STDC, was adopted and able to generate baseline resolution (>1.50) for 17 pairs of FMOC-AA enantiomers and somewhat lower resolution for arginine (1.36) and alanine (1.18), respectively. Experimental data revealed that the addition of the second selector did not increase the mobility difference between a pair of enantiomers (Delta mu = mu(D) - mu(L) and the number of theoretical plates (N), but decreased the summed apparent mobility of a pair of enantiomers (Sigma mu = mu(D) - mu(L)), which was mainly due to the decrease of the electroosmotic flow. The variation of Sigma mu was thus the major reason responsible for the improvement of chiral resolution in this study. The result demonstrated that not only the intrinsic selectivity of the selectors was the basis of the chiral separation, but also the non-chiral effect of the selectors, the change of the electroosmotic flow, was an important factor in enhancing the enantioseparation resolution. This study could probably help to explain the reasons for resolution improvement in some dual selectors systems, which are not very clear at present.

Stereoselective peptide analysis

The stereochemistry of a peptide determines its spatial features and can profoundly influence its chemical properties and biological activity. Thus, the analysis of the stereochemical properties of a peptide is an important aspect of its characterisation. For such investigations a "selector" that engages in stereoselective interactions with the peptide analytes is often used. A substantiated knowledge of the underlying molecular recognition mechanism will therefore be helpful in understanding existing and developing new stereoselective analysis systems. After a short introduction concerning the fundamentals of peptide stereoisomers and their biological implications, the stereoselective peptide analysis methods described in the literature are comprehensively reviewed. The characteristics and applications of the employed methods based on various techniques including chromatography (pressure- and electrokinetically driven), capillary electrophoresis, nuclear magnetic resonance spectroscopy and mass spectrometry are discussed. The various selectors that have been utilised to discriminate peptide enantiomers and/or diastereomers are described concurrently. The review concludes with an overview of combinations and comparisons of techniques that have been applied to the analysis of peptide stereoisomers and constitute a trend for further developments.

Thin-layer chromatography separation of enantiomers of verapamil using macrocyclic antibiotic as a chiral selector

Silica gel thin-layer chromatography plates impregnated with macrocyclic antibiotic, vancomycin, as chiral selector were prepared and used for the resolution of (+/-)-verapamil. A mobile phase system of acetonitrile-methanol-water (15:2.5:2.5, v/v) was worked out systematically. The effects of chiral selector, temperature and pH on resolution were also studied. The spots were detected with iodine vapors and the detection limit was found to be 0.074 microg of each enantiomers.

Enantiomeric separation of dansyl amino acids using macrocyclic antibiotics as chiral mobile phase additives by narrow-bore high-performance liquid chromatography

Seven macrocyclic antibiotics were evaluated as chiral selectors for the enantiomeric separation of 11 dansyl amino acids using narrow-bore high-performance liquid chromatography (HPLC). The macrocyclic antibiotics were incorporated as mobile phase additives to determine the enantioselective effects on the chiral analytes. The resolution and capacity factor (k') of each analyte were assessed while varying the structure of macrocyclic antibiotic and the mobile phase buffer pH. The selectivity of the chiral selectors was measured as a function of changes in these parameters. All 11 dansyl amino acids were separated by at least one of the chiral selectors. Three-dimensional computer modeling of the more effective chiral selectors illustrated the importance of macrocyclic antibiotic structure concerning stereospecific analyte interaction.

Enantioseparation of amino acid derivatives by capillary zone electrophoresis using vancomycin as chiral selector

The separation of racemic derivatized amino acids (N-acetyl) into their enantiomers was achieved using capillary zone electrophoresis employing vancomycin as a chiral selector. Due to the strong absorption properties of the chiral selector at the low wavelengths used, the partial-filling countercurrent method was adopted in order to improve method sensitivity. In the separation system studied, the chiral selector filled only a part of the capillary and, due to the appropriate selection of the pH, was moving in the opposite direction of the analytes keeping the detector free from absorbing compounds. The effect of several experimental parameters on the enantioresolution of analytes was studied, e.g., vancomycin concentration (0-5 mM), pH of the background electrolyte (pH 4-7), capillary temperature (15-35 degrees C), and the presence of an organic modifier in the run buffer (methanol or ethanol or n-propanol). N-Acetyl glutamic acid, serine, cystine, tyrosine, and proline were all baseline-resolved into their enantiomers and the enantioresolution factor (R(s)) was increased by raising the vancomycin concentration. pH 4 allowed the baseline resolution of the five studied analytes in the presence of 2.5 mM of chiral selector and an increase in pH caused a decrease of R(s).

Separation of ritalin racemate and its by-product racemates by capillary electrophoresis

Ritalin, [(+)-threo]methylphenidate hydrochloride, is a chiral drug substance with two chiral centers. The drug substance may contain three pairs of enantiomers, [(+)-threo], [(-)-threo], [(+)-erythro] and [(-)-erythro] isomers, and its degradation products, threoritalinic acid racemate. Determination of the optical purity of ritalin drug substance and the amount of its by-product isomers is a critical step in the single-isomer drug development. In order to efficiently recognize the three pairs of enantiomers by one method, capillary electrophoresis (CE) was employed for the separation. The three pairs of enantiomers in CE showed different enantioselectivities with eight different types of CDs. Only 2,6-di-o-methyl-beta-cyclodextrin (DM-beta-CD) and carboxymethyl-beta-cyclodextrin (CM-beta-CD) showed enantioselectivity to all these pairs of enantiomers. With respect to separation resolution and efficiency, DM-beta-CD was chosen as the chiral selector. For optimization of the separation conditions, the concentration of DM-beta-CD, pH of the buffer solution, and temperature of the capillary were further studied.

Influence of the amino acid sequence and nature of the cyclodextrin on the separation of small peptide enantiomers by capillary electrophoresis using randomly substituted and single isomer sulfated and sulfonated cyclodextrins

The separation of dipeptide and tripeptide enantiomers using negatively charged single isomers as well as randomly sulfated and sulfonated cyclodextrins (CDs) was investigated with respect to the amino acid sequence of the peptides and the nature of the CDs. Standardized conditions concerning buffer pH and molarity, CD concentration, and separation voltage were applied. Compared to suffobutylether-beta-CD and heptakis-(2,3-dimethyl-6-sulfato)-beta-CD, randomly sulfated beta-CD as well as the single isomer derivatives heptakis-6-sulfato-beta-CD and heptakis-(2,3-diacetyl-6-sulfato)-beta-CD were the more universal CDs for enantioseparations. The enantiomer migration order depended to a greater extent on the CD than on the amino acid sequence of the peptide although small structural differences such as formation of a peptide amide or ester affected the chiral recognition by the randomly substituted CD derivatives. Using sulfobutylether-beta-CD or heptakis-(2,3-diacetyl-6-sulfato)-beta-CD the DD enantiomers migrated before the LL enantiomers for most peptides while the opposite migration order, i.e. LL before DD, was observed when heptakis-6-sulfato-beta-CD was applied as chiral selector.

Separation of dipeptide and tripeptide enantiomers in capillary electrophoresis using carboxymethyl-beta-cyclodextrin and succinyl-beta-cyclodextrin: influence of the amino acid sequence, nature of the cyclodextrin and pH

The separation of the LL and DD enantiomers of dipeptides and tripeptides using cyclodextrins (CDs) containing carboxyl groups was investigated with respect to the amino acid sequence of the peptides, the nature of the cyclodextrin and the buffer pH. Compared to succinyl-beta-cyclodextrin, carboxymethyl-beta-cyclodextrin was the more universal CD for enantioseparations. Reversal of the enantiomer migration order upon increasing the buffer pH from 2.5 to 3.5 was observed in some cases. As shown for Phe-Phe reversal of the migration order also occurred between pH 3.5 and 5.3. Complexation constants and complex mobilities change with pH as both, the charge of the peptide and the charge of the CD vary depending on the pH. The complexation constants and complex mobilities of the dipeptides Ala-Phe and Phe-Phe were determined in order to explain the enantiomer migration behavior in the pH range 2.5-5.3. While the complexation constants determined the migration order at pH 2.5 and 5.3, complex mobility had a strong influence around pH 3.5-3.8.

Chiral separations using the macrocyclic antibiotics: a review

The macrocyclic antibiotics have recently gained popularity as chiral selectors in CE, HPLC and TLC. The macrocyclic antibiotics used for chiral separations include the ansamycins, the glycopeptides, and the polypeptide antibiotic thiostrepton. Although not strictly considered macrocyclic antibiotics, the aminoglycosides are antibiotics that have been used for chiral separations in CE. More chiral analytes have been resolved using the glycopeptides than with the other macrocyclic antibiotics combined. The glycopeptides vancomycin, ristocetin A and teicoplanin have been used extensively as chiral selectors in CE, with ristocetin A appearing to be the most useful chiral selector followed by vancomycin and teicoplanin, respectively. The macrocyclic antibiotics have also been used as chiral bonded phases in HPLC, and HPLC stationary phases based on vancomycin, ristocetin A and teicoplanin have been commercialized. Ristocetin A seems to be the most useful glycopeptide HPLC bonded phase, but its greater expense can be a drawback. The macrocyclic antibiotics have been used with micelles to improve efficiency, provide unique selectivity, and extend the range of separations to neutral solutes. Changing the macrocyclic antibiotic used in CE or HPLC can significantly alter the enantioselectivity of the separations. In fact, the glycopeptide antibiotics are complementary to one another, where if a partial enantioresolution is obtained with one glycopeptide, there is a high probability that a baseline or better separation can be obtained with another.

Derivatization trends in capillary electrophoresis

This survey gives an overview of recent derivatization protocols, starting from 1996, in combination with capillary electrophoresis (CE). Derivatization is mainly used for enhancing the detection sensitivity of CE, especially in combination with laser-induced fluorescence. Derivatization procedures are classified in tables in pre-, on- and postcapillary arrangements and, more specifically, arranged into functional groups being derivatized. The amine and reducing ends of saccharides are reported most frequently, but examples are also given for derivatization of thiols, hydroxyl, carboxylic, and carbonyl groups, and inorganic ions. Other reasons for derivatization concern indirect chiral separations, enhancing electrospray characteristics, or incorporation of a suitable charge into the analytes. Special attention is paid to the increasing field of research using on-line precapillary derivatization with CE and microdialysis for in vivo monitoring of neurotransmitter concentrations. The on-capillary derivatization can be divided in several approaches, such as the at-inlet, zone-passing and throughout method. The postcapillary mode is represented by gap designs, and membrane reactors, but especially the combination of separation, derivatization and detection on a chip is a new emerging field of research. This review, which can be seen as a sequel to our earlier reported review covering the years 1991-1995, gives an impression of current derivatization applications and highlights new developments in this field.

Evaluation of the macrocyclic antibiotic LY333328 as a chiral selector when used as a mobile phase additive in narrow bore HPLC

The macrocyclic antibiotic LY333328 has been evaluated as a chiral selector for the enantioseparation of nine dansylated amino acids. This macrocyclic glycopeptide was used as a chiral mobile phase additive (CMPA) in conjunction with narrow bore high-performance liquid chromatography (HPLC). The key mobile phase parameters of LY333328 concentration and buffer pH were varied, along with variations in stationary phases consisting of C8, phenyl, cyano, and silica. After observing and plotting changes in retention and resolution based on corresponding variation in these parameters, a better understanding of the behavior of this chiral selector was obtained. The pKa values of the dansyl amino acid analytes and LY333328 were measured and used to gain a better understanding of the microenvironment in which these enantioseparations occur. Optimized conditions resulted in the baseline separation of eight of nine dansyl amino acids.

Chiral separation of amino acids and peptides by capillary electrophoresis

Chiral separation of amino acids and peptides by capillary electrophoresis (CE) is reviewed regarding the separation principles of different approaches, advantages and limitations, chiral recognition mechanisms and applications. The direct approach details various chiral selectors with an emphasis on cyclodextrins and their derivatives, antibiotics and chiral surfactants as the chiral selectors. The indirect approach deals with various chiral reagents applied for diastereomer formation and types of separation media such as micelles and polymeric pseudo-stationary phases. Many derivatization reagents used for high sensitivity detection of amino acids and peptides are also discussed and their characteristics are summarized in tables. A large number of relevant examples is presented illustrating the current status of enantiomeric and diastereomeric separation of amino acids and peptides. Strategies to enhance the selectivity and optimize separation parameters by the application of experimental designs are described. The reversal of enantiomeric elution order and the effects of organic modifiers on the selectivity are illustrated in both direct and indirect methods. Some applications of chiral amino acid and peptide analysis, in particular, regarding the determination of trace enantiomeric impurities, are given. This review selects more than 200 articles published between 1988 and 1999.

Enantiomeric separations of dansyl amino acids using the macrocyclic antibiotic A35512B as a chiral selector in capillary electrophoresis

The macrocyclic antibiotic A35512B was examined as a chiral selector for capillary electrophoresis (CE) using thirteen racemic dansyl amino acids as test analytes. The chiral selectivity of A35512B was evaluated as a function of the run buffer pH, antibiotic concentration, and organic modifier composition. After optimizing these parameters, the macrocylic antibiotic A35512B provided high resolutions of all the enantiomers for the thirteen dansyl amino acids tested in this study.

Separation of chiral compounds by capillary electrophoresis

This review presents the different chiral selectors used in capillary electrophoresis (CE) for the separation of enantiomers. The use of charged cyclodextrins, crown ethers, polysaccharides, proteins, natural and synthetic micelles, macrocyclic antibiotics and ergot alkaloids is discussed in detail. Neutral native and derivatized cyclodextrins are not treated because several review articles have already been published on this topic. Recent developments like the application of two chiral selectors in the same background electrolyte are highlighted.

Chiral analysis by capillary electrophoresis using antibiotics as chiral selector

The separation of chiral compounds by capillary electrophoresis (CE) is a very interesting field of research in different areas such as pharmaceutical, environmental, agricultural analysis etc. The separation of two enantiomers can be achieved in CE using a chiral environment interacting with the two analytes on forming diastereoisomers with different stability constants and thus different mobilities. A wide number of chiral selectors have been employed in CE and among them glycopeptide antibiotics exhibited excellent enantioselective properties towards a wide number of racemic compounds. Vancomycin, ristocetin A, rifamycins, teicoplanin, kanamycin, streptomycin, fradiomycin, and two vancomycin analogues, added to the background electrolyte (BGE), are the antibiotics studied by CE running the separation in untreated and/or coated fused-silica capillary. Due to adsorption and absorption phenomena, some drawbacks can be expected when using bare fused-silica capillary, e.g., changes of electroosmotic flow (EOF), broaden peaks, reduced efficiency and low sensitivity. Coated capillary and counter current mode can be the solution to overcome the above mentioned problems. This review surveys the separation of enantiomers by CE when macrocyclic antibiotics are used as chiral selector. The enantioselectivity can be easily controlled modifying several parameters such as antibiotic type and concentration, pH, ionic strength and concentration of the background electrolyte, organic modifier etc. The paper also presents a list of the latest chiral separations achieved by CE where antibiotics were used as chiral selector.

Chiral separation of DL-peptides and enantioselective interactions between teicoplanin and D-peptides in capillary electrophoresis

Teicoplanin has been evaluated as a selector for enantioseparation of di- and tripeptide derivatives in capillary electrophoresis. Separation variables such as type of buffer, pH, concentrations of teicoplanin and organic modifier were examined. Optimal separation conditions were obtained by means of factorial design experiments. The effects of teicoplanin concentrations below and above its critical micellar concentration (CMC) and of acetonitrile (ACN) on the separation were demonstrated. The use of a high concentration of ACN resulted not only in increased selectivity, but also in improved separation efficiency. Electroosmotic flow was observed to be largely independent of the concentrations of teicoplanin under the optimized conditions. Good repeatability of migration times was obtained. The interactions between teicoplanin and D and L peptides were studied, and it was found that, for some peptides, teicoplanin exhibited enantioselective interaction only with the D-form. Somewhat lower separation efficiencies were thus observed for the strongest interacting (D-form) peptides. Chiral separation of 15 DL-peptide derivatives was achieved in less than 10 min.