Capillary electrophoresis of peptides and proteins in fused-silica capillaries coated with derivatized polystyrene nanoparticles

Separation of dynorphin peptides by capillary electrochromatography using a polydiallyldimethylammonium chloride gold nanoparticle-modified capillary

Dynorphin A (Dyn A) is an endogenous opioid peptide found in blood and central nervous system tissue at very low concentrations. Elevated levels of Dyn A due to different disease states, for example neurodegenerative disease, have been linked to toxic nonopioid activity. CE is a powerful technique that can achieve high-efficiency separations of charged analytes. However, CE has limited use for the analysis of basic proteins and peptides, due to their adsorption onto the inner surface of the fused silica at pHs below their pI. This adsorption can lead to a loss of efficiency, irreproducibility of migration times, and peak tailing. To obviate this problem, a polydiallyldimethylammonium chloride-stabilized gold nanoparticle-coated capillary was investigated for the separation of dynorphin metabolites. The positively charged gold nanoparticles (GNP) minimized unwanted adsorption of the positively charged peptides onto the surface of the fused-silica capillary. Separation efficiency and resolution for opioid peptides Dyn A (1-6), Dyn A (1-7), Dyn A (1-8), Dyn A (1-11), and leu-enkephalin on the GNP-coated capillary column were evaluated under different experimental parameters. The best separation of Dyn A (1-17) and its fragments was achieved using a BGE that consists of 40 mM sodium acetate buffer (pH 5) containing 5% GNP, a field strength of -306 V/cm, and a 75 μm id capillary. The developed method was applied to the separation of tryptic peptide fragments of dynorphin A (1-17).

Embedded ceria nanoparticles in gel improve electrophoretic separation: a preliminary demonstration

Ceria NP embedded PAGE could improve the analytical figures of merit by reducing Joule heating and lowering the band broadening.

Improvement of heat dissipation in agarose gel electrophoresis by metal oxide nanoparticles

Joule heating is a primary limitation in slab gel electrophoresis which is a gold standard method in biochemistry and biotechnology.

Use of nanomaterials in capillary and microchip electrophoresis

This review gives an overview of different separation strategies with nanomaterials and their use in capillary electrophoresis (CE) and capillary electrochromatography, as well as in microchip electrophoresis, including metal and metal oxide nanoparticles, carbon nanotubes, fullerene and polymer nanoparticles, as well as silica nanoparticles. The paper highlights the new developments and innovative applications of nanoparticles as pseudostationary phases or immobilized on the capillary surface for CE separation. The separation and characterization of target nanoparticles with different sizes by CE are reviewed likewise.

Preparation and characterization of lysine-immobilized poly(glycidyl methacrylate) nanoparticle-coated capillary for the separation of amino acids by open tubular capillary electrochromatography

In this study, poly(glycidyl methacrylate) (PGMA) nanoparticles (NPs) were prepared and chemically immobilized for the first time onto a capillary inner wall for open tubular capillary electrochromatography (OTCEC). The immobilization of PGMA NPs onto the capillary was attained by a ring-opening reaction between the NPs and an amino-silylated fused capillary inner surface. Scanning electron micrographs clearly demonstrated that the NPs were bound to the capillary inner surface in a dense monolayer. The PGMA NP-coated column was then functionalized by lysine (Lys). After fuctionalization, the capillary can afford strong anodic electroosmotic flow, especially in acidic running buffers. Separations of three amino acids (including tryptophan, tyrosine and phenylalanine) were performed in NP-modified, monolayer Lys-functionalized and bare uncoated capillaries. Results indicated that the NP-coated column can provide more retention and higher resolution for analytes due to the hydrophobic interaction between analytes and the NP-coating. Run-to-run and column-to-column reproducibilities in the separation of the amino acids using the NP-modified column were also demonstrated.

Ordered, mesoporous metal phosphonate materials with microporous crystalline walls for selective separation techniques

Ordered, hexagonal, mesoporous metal (Ti, Zr, V, Al)-phosphonate materials with microporous crystalline walls are synthesized through a microwave-assisted procedure by using triblock copolymer F127 as the template. Corresponding metal chlorides and ethylene diamine tetra(methylene phosphonic acid) are chosen as the inorganic precursors and the coupling molecule, respectively. X-ray diffractometry, transmission electron microscopy, N(2) sorption, and thermogravimetry measurements confirm that the obtained metal phosphonates possess a hierarchically porous structure with pore sizes of 7.1-7.5 nm and 1.3-1.7 nm for mesopores and micropores, respectively, and the metal phosphonate materials are thermally stable up to around 450 °C with the pore structure and hybrid framework well preserved. Magic angle spinning NMR, Fourier-transform infrared spectroscopy, and X-ray photoelectron spectroscopy analyses indicate that the phosphonate groups are homogenously incorporated into the hybrid framework of the obtained materials. For the first time, the mesoporous hybrid materials are employed as the stationary phase in open tubular capillary electrochromatography technique for the separation of various substances including acidic, basic, and neutral compounds. These materials show good selectivity and reproducibility for this application.

Use of nanoparticles in capillary and microchip electrochromatography

Applications of nanoparticles are of rising interest in separation science, due to their favorable surface-to-volume ratio as well as their applicability in miniaturization. A stationary phase with large surface area in combination with an electroosmotic flow-driven system has great potential in a highly efficient separation system. This review covers the use of various nanoparticles as stationary or pseudostationary phase in capillary and microchip electrochromatography. The use of nanoparticles in pseudostationary phase capillary electrochromatography and open-tubular capillary electrochromatography are thoroughly discussed. The stationary and pseudostationary phases that are described include polymer nanoparticles, gold nanoparticles, silica nanoparticles, fullerenes and carbon nanotubes.

Silica nanoparticles as pseudostationary phase for protein separation

This paper investigated the potential use of silica nanoparticles (SNPs) as pseudostationary phase (PSP) for protein separation. The wall adsorption of SNPs as well as the influences of SNPs and poly(ethylene oxide) (PEO) were studied. The SNPs showed selectivity toward the proteins, and the concentration ratio of SNPs to PEO influenced the separation. The proteins that could not be baseline-resolved under conventional CZE mode were separated in a buffer consisting of 30 mM phosphoric acid, 0.05% PEO, and 0.05% SNPs at pH 2.37, with detection limits ranging from 2 to 45.5 ppm. The intraday and interday RSDs of the migration times were in the ranges of 2.1-2.8% (n = 5) and 2.5-3.4% (three days, n = 3 x 5 = 15), respectively.

Modification of poly(dimethylsiloxane) microfluidic channels with silica nanoparticles based on layer-by-layer assembly technique

A hydrophilic poly(dimethylsiloxane) (PDMS) microchip with stable electroosmotic flow (EOF) was prepared by a simple and reproducible coating procedure with silica nanoparticles. The microchannel wall of PDMS chip was coated with a layer of poly(diallyldimethylammonium chloride) (PDDA) and then collected silica nanoparticles. The assembly was followed by contact angle, charge-coupled device (CCD) imaging, electroosmotic flow (EOF) measurements and electrophoretic separation experiments. Contact angle measurements revealed the coated surface was hydrophilic; the water contact angle for coated chips was 64 degrees compared with a water contact angle for native PDMS chips of 113 degrees . CCD images indicated a substantially more hydrophilic microchannel than native PDMS. We carried out a comparison and concluded that the EOF values on the coated PDMS chip were close to those values on the glass chip above pH 7.0. The coated channel had an excellent stability and reproducibility, RSD of EOF values (n=6) on native and coated PDMS microchip was 1.58 and 0.57%, respectively. Separation of dopamine and epinephrine was performed on the coated chip generated 1.40 x 10(5), 1.39 x 10(5) theoretical plates/m compared with the native PDMS chip of 0.79 x 10(5), 0.88 x 10(5), high resolution of 1.7 was achieved with a channel of 3.60 cm length.

Enhanced separation of purine and pyrimidine bases using carboxylic multiwalled carbon nanotubes as additive in capillary zone electrophoresis

This paper describes the enhanced separation of adenine (A), hypoxanthine (HX), 8-azaadenine (8-AA), thymine (T), cytosine (C), uracil (U) and guanine (G) by CZE dispersing carboxylic multiwalled carbon nanotubes (c-MWNTs) into the running buffer. The effect of important factors such as c-MWNT nanoparticle concentration, the acidity and concentration of running buffer, and separation voltage were investigated to acquire the optimum conditions. The seven purine and pyrimidine bases could be well separated within 16 min in a 35 cm effective length fused-silica capillary at a separation voltage of +8.0 kV in a 23 mM tetraborate buffer (pH 9.2) containing 8.0 x 10(-5) g/mL c-MWNTs. Under the optimal conditions, the linear ranges were of 2-250 microg/mL for A (R2 = 0.995), 3-200 microg/mL for U (R2 = 0.990) and G (R2 = 0.992), 3-250 microg/mL for T (R2 = 0.998), 2-200 microg/mL for C (R2 = 0.985) and 4-200 microg/mL for HX (R2 = 0.988) and 8-AA (R2 = 0.990). The detection limits were 0.9 microg/mL for A (S/N = 3), 2.4 microg/mL for U, 2.0 microg/mL for T, 1.5 microg/mL for C, 2.5 microg/mL for G and 3.0 microg/mL for HX and 8-AA. The proposed method was successfully applied for determining five purine and pyrimidine bases in yeast RNA.

Cationic lipid vesicles as coating precursors in capillary electrochromatography: Separation of basic proteins and neutral steroids

1,2-Dioleyl-3-trymethylammoniumpropane (DOTAP) lipid vesicles were employed as coating precursors to obtain a semipermanent cationic lipid bilayer in silica capillary. The coating procedure was relatively fast and simple. Reliable results for the separation of four basic proteins (alpha-chymotrypsinogen A, ribonuclease A, cytochrome C, lysozyme) were obtained by using an acetate buffer under acidic conditions. The RSDs of the migration times were not higher than 0.5% run-to-run and about 1% day-to-day (3 days), while the RSDs of the peak areas were within 7% day-to-day (3 days). The day-to-day RSD of the EOF mobility of about 1%, confirmed that the DOTAP coating was stable for the separation of basic proteins, under acidic buffers. In addition to basic proteins the DOTAP coating was found suitable under acidic conditions for the repeatable separation of neutral steroids. The potential of DOTAP as a carrier in background electrolyte solution was studied.

Preparation and characterisation of dual-layer latex-coated columns for open-tubular capillary electrochromatographic preconcentration of cations combined in-line with their separation by capillary electrophoresis

A dual-layer ion-exchange latex-coated column was prepared and characterised for on-capillary preconcentration of cations using an open-tubular ion-exchange CEC format. After preconcentration, the analyte cations were eluted with a transient isotachophoretic gradient and separated by CE. The latex double layer was established by first coating the negatively charged wall of the capillary with a layer of cationic quaternary ammonium anion-exchange Dionex AS5A latex particles (60 nm diameter), and then coating a layer of anionic sulphonated cation-exchange Dionex CS3 latex particles (300 nm diameter) onto the underlying AS5A layer. The adhesion of layers is based on electrostatic attractions. Several dual-layer capillaries were characterised for their EOF and ion-exchange capacity and this showed that coatings could be prepared reproducibly by a simple flushing procedure. The dual-layer columns exhibited a moderate, pH-independent EOF (ca. 26 x 10(-9 )m2V(-1)s(-1)) and an ion-exchange capacity of 57 microequiv./g (or 2.69 nequiv./column). Using an 8 cm length of coated capillary combined with a 72 cm length of untreated capillary, a method for on-line preconcentration and separation of monovalent organic bases, alkali metal ions and alkaline earth metal ions by CE was developed. Recoveries for the preconcentration step were 48% for 4-methylbenzylammonium, 43% for benzylammonium, 30-32% for alkali metal ions and 71-75% for alkaline earth cations. In all cases, recoveries were reproducible with RSDs being less than 6.2%. The influences of the ion-exchange selectivity coefficient of the analyte and the sample-loading rate on analyte recovery were also examined. The proposed method was utilised for the determination of alkaline earth cations and low microM detection limits were obtained.

On-Line Concentration of Microheterogeneous Proteins by Capillary Electrophoresis Using SDS and PEO as Additives

In this paper, we describe a method for analyzing large-volume protein samples using capillary electrophoresis in conjunction with laser-induced fluorescence detection (CE-LIF). To improve the stacking and separation efficiencies of proteins, we added either 0.01% sodium dodecyl sulfate (SDS) or 0.01% poly(ethylene oxide) (PEO) to the Tris-borate solutions (pH 10.0) used to prepare the protein samples. After injection of the large-volume samples (ca. 1.0 microL, 0.1 microM), the proteins migrate against the electroosmotic flow (EOF) and enter the PEO zone; this process causes them to slow and stack at the boundary between the PEO and sample zones. As a result, the limits of detection (LODs) at a signal-to-noise (S/N) of 3 for most proteins are sub-nM to several nM. For instance, the LOD (S/N = 3) for alpha-lactalbumin is 0.48 nM, which is an 84-fold sensitivity enhancement over the traditional method. By applying a short plug of 0.2% SDS prior to sample injection, a greater number of peaks, representing the microheterogeneity of the proteins, were resolved and the stacking efficiency of the proteins increased slightly. This method allowed us to detect 12 peaks when injecting a large volume of sample containing six model proteins (0.1 microM). We also analyzed the microheterogeneities of the proteins by using CE with UV-Vis absorption detection when injecting a large volume of sample containing six model proteins (1.0 microM) in the presence of a 1.0% SDS plug. The practical method is validated by the detection of human serum albumin in a urine sample, obtained from a healthy female, without sample pretreatment; its concentration was 0.18 microM. We further demonstrate the capability of this method to detect low amounts of proteins through the detection of 45 nM hemoglobin after injecting ca. 1.0 microL of ultradilute lysed red blood cells. The experimental results indicate that our proposed method has great potential for use in diagnosis and proteomics applications.

Alkylthiol gold nanoparticles in sol-gel-based open tubular capillary electrochromatography

A novel open-tubular capillary electrochromatography (OTCEC) column was prepared by immobilizing dodecanethiol gold nanoparticles on prederivatised fused-silica capillary columns with sol-gel technology. 3-Mercaptopropyl-trimethoxysilane (MPTMS) was selected as sol-gel precursor to develop a sol-gel layer on the inner wall of the capillary, prior to assembly of dodecanethiol gold nanoparticles onto the generated sol-gel layer through specific interaction between the gold nanoparticles and surface terminating thiol groups. The electrochromatographic behaviour of the sol-gel gold nanoparticle capillary was compared with a gold nanoparticle capillary prepared via MPTMS surface functionalisation, through variation of the percentage of the organic modifier, pH, and separation voltage. Efficient separation for a "reversed-phase" test mixture of thiourea, naphthalene, and biphenyl and for selected polycyclic aromatic hydrocarbons (PAHs) was obtained on the sol-gel based gold nanoparticle capillaries. OTCEC separations of three selected drug substances (propiophenone, benzoin, and warfarin) were also demonstrated. Scanning electron microscopy was used for the characterization of the sol-gel gold nanoparticle capillary surface. The results confirm that dodecanethiol gold nanoparticles, bound on the sol-gel-based inner layer of fused-silica capillary, can provide sufficient solute-bonded phase interactions for OTCEC with reproducible retention as well as characteristic reversed-phase behaviour.

Wall coating for capillary electrophoresis on microchips

This review article with 116 references describes recent developments in the preparation of wall coatings for capillary electrophoresis (CE) on a microchip. It deals with both dynamic and permanent coatings and concentrates on the most frequently used microchip materials including glass, poly(methyl methacrylate), poly(dimethyl siloxane), polycarbonate, and poly(ethylene terephthalate glycol). Characterization of the channel surface by measuring electroosmotic mobility and water contact angle of the surface is included as well. The utility of the microchips with coated channels is demonstrated by examples of CE separations on these chips.

Gold Nanoparticle-Modified Etched Capillaries for Open-Tubular Capillary Electrochromatography

The use of gold nanoparticles in conjunction with etched capillary-based open-tubular capillary electrochromatography (OTCEC) to improve the efficiency of separation and the selectivity between selected solutes is described. The fused-silica capillaries (50-microm i.d.) were etched with ammonium hydrogen difluoride, followed by prederivatization of the new surface with (3-mercaptopropyl)trimethoxysilane (MPTMS) for the immobilization of dodecanethiol gold nanoparticles, for OTCEC. The electrochromatography of a "reversed-phase" test mixture and of selected polycylic aromatic hydrocarbons was investigated, and efficient separations and high theoretical plate numbers per meter were obtained. The electroosmotic flow characteristics of the etched gold nanoparticle capillary, unetched gold nanoparticle capillary, bare capillary, and etched bare capillary were studied by varying the percentage of organic modifier in buffer, buffer pH, and separation voltage. Optical microscopy and scanning electron microscopy were used to examine the process of etching and modification and the surface features of the etched gold nanoparticle capillary. The results confirm that dodecanethiol gold nanoparticles bonded on the etched inner wall of the fused-silica capillary can provide sufficient solute-bonded phase interactions to obtain OTCEC separations with reproducible retention, as well as characteristic reversed-phase behavior, even with the inner diameter of the capillary of 50 microm.

A novel double coating for microemulsion electrokinetic chromatography with laser-induced fluorescence detection: as tested with amino acid derivatives

A novel double coating (DC) was developed for fast and reproducible microemulsion electrokinetic chromatography (MEEKC), as tested with separation and determination of amino acids using laser-induced fluorescence (LIF) detection after derivatization with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazol. The simple coating is a combination of a removable covalent layer and a dynamic SDS coating. Hexamethyldisilazane was utilized for the covalent layer that can be regenerated on-line. Compared with previous no-coating method, the analysis time was shortened; and the reproducibility of migration times was improved.

Micellar electrokinetic chromatography with laser-induced fluorescence detection for rapid and sensitive analysis of two new bioactive reagents using dynamic covalent coating

A simple, rapid, selective, and sensitive micellar electrokinetic chromatography (MEKC) with laser-induced fluorescence detection (LIF) method was developed, using hexamethyldisilazane (HMDS) as dynamic covalent coating (DCC), for the analysis of two new bioactive agents N-n-hexyl-N'-(sodium p-aminobenzenesulfonate) thiourea (HXPT) and N-n-undecyl-N'-(sodium p-aminobenzenesulfonate) thiourea (UPT) derivatized with 4-chloro-7-nitrobenzo-2-oxa-1,3-diazole. MEKC methods both not using DCC and using DCC were investigated. In a series of optimization steps, DCC and a running buffer of 20 mM Na2B4O7 + 16 mM SDS + 8% acetonitrile were applied for determination of the derivatives. Linear relationships for HXPT and UPT were obtained in the range of 5 to 100 microM (correlation coefficient: 0.9986 for HXPT, 0.9978 for UPT), and the detection limits for HXPT and UPT were 16.5 and 39.0 ng mL(-1). The sensitivity was improved over that of fluorescence spectroscopy methods. The method was applied to the analysis of the two reagents in lab water waste with recoveries in the range of 95.6-107.5%.

Use of coupled open-tubular capillaries for in-line ion-exchange preconcentration of anions by capillary electrochromatography with elution by a transient isotachophoretic gradient

Open-tubular capillaries have been joined together for use in on-column ion-exchange preconcentration of anions by capillary electrochromatography (CEC) with elution by a transient isotachophoretic gradient. This involved the coupling of a preconcentration capillary and a separation capillary using a PTFE sleeve. Such coupling allowed precise lengths of differently coated capillaries to be joined in-line to form a single multi-mode column. The different segments could be tailored to optimize a separation by either altering the length of each segment to precisely manipulate the amount of stationary phase present or by changing the internal diameter of each segment to alter the phase ratio in the chromatographic column without affecting the path length for UV detection. In this work, a segmented in-line capillary was used in conjunction with a fluoride-octanesulfonate discontinuous electrolyte system to increase the number of anions that could be preconcentrated and separated. Quaternary ammonium functionalised latex particles were used for creating the preconcentration segment and the separation segment was coated with poly(diallyldimethylammonium chloride). This allowed the detection of trace anions in drinking water and in situ sampling of river water for the analysis of trace inorganic anions. The repeatability of producing the quaternary ammonium functionalized latex-coated segments was assessed and the effect of segmentation on peak efficiency was investigated.

On-line concentration of trace proteins by pH junctions in capillary electrophoresis with UV absorption detection

We report an on-line concentration approach based on pH junctions for the analysis of trace proteins under acidic conditions by capillary electrophoresis (CE) with UV absorption detection. Stacking is due to decreases in the electrophoretic mobilities of proteins when migrating from the sample zone to a relatively high-pH buffer filled in the capillary. Acidic buffers prepared from tris(hydroxymethyl)aminomethane (co-ions) and propanoic acid were suitable. With respect to speed, resolution, and stacking efficiency, it is appropriate to conduct the analysis of proteins under discontinuous conditions: pH 3.8 (inside the capillary), 2.8 (protein samples), and 3.3 (anodic reservoir). To minimize protein adsorption on the capillary wall, capillaries dynamically coated with single, double, and triple layers of polymers have been made and tested. Capillaries dynamically coated with three layers of neutral, cationic and neutral polymers in sequence were used to separate four proteins with good reproducibility. When using a 60-cm capillary, the peak height increased linearly with the injection volume up to 1.42-microl and peak profiles were sharp, indicating stacking of proteins. As a result, the limits of detection for lysozyme, myoglobin, carbonic anhydrase, and alpha-lactalbumin were 1.9, 3.2, 11.3 and 6.5 nM, respectively. Furthermore, this method has been applied to the analysis of about 1.31 and 0.66 microl of 5.00 and 0.20 microM peptic and tryptic digests of beta-casein, with results of detecting 26 and 12 peaks in 21 and 14 min, respectively.

Improved separation of microheterogeneities and isoforms of proteins by capillary electrophoresis using segmental filling with SDS and PEO in the background electrolyte

To improve the separation efficiency while achieving high sensitivity for the analysis of proteins' microheterogeneity, a segmental-filling technique has been developed and tested in capillary electrophoresis with laser-induced native fluorescence using a pulsed Nd:YAG laser. Using a short plug of SDS applied to the capillary and the anticonvectant poly(ethylene oxide) (PEO), the microheterogeneities of a number of proteins with pI values ranging from 4.5 to 11.1 could be detected. This high resolving power is due to reduced adsorption on the capillary wall, sieving, and the interaction with SDS. Consequently, the length and the concentration of the SDS plug play a significant role in determining the resolution and sensitivity. The method has been applied to the analysis of salivary and cerebrospinal fluid (CSF) samples. Without any sample pretreatment, using a 10-s 1x SDS plug, six alpha-amylase isoforms in a salivary sample were resolved in 17 min and three more peaks were detected in a CSF sample. With simplicity, high resolving power, and rapidity, the method has shown great potential for proteomics.

Organically modified silica sol-mediated capillary electrophoresis

We describe in this paper the use of ormosil (organically modified silica) sols as additives to the run buffer for selectivity manipulations between solutes in capillary electrophoresis. CE systems that contain sol additives in the run buffer can be thought of as pseudocapillary electrochromatography. Three sols based on different types of silanes were studied. Methyltrimethoxysilane (MTMOS)-based sol was found to improve selectivities between various aromatic acids. Aminopropyltrimethoxysilane (APS) sol interacts differently with structural isomers of aromatic acids than does MTMOS. At low pH with APS sol in the run buffer, neutral solutes can be separated, as well. The separation of the neutral solutes seems to be facilitated by the formation of hydrogen bonds between the solutes and the APS sol. APS and N-[3-(trimethoxysilyl)propyl]-ethylenediamine (EDAS) affect the separation of the same compounds differently, thus indicating that even small changes of the functional groups of the sol have pronounced effect on the interactions between the sols and the solutes.

On-column ion-exchange preconcentration of inorganic anions in open tubular capillary electrochromatography with elution using transient-isotachophoretic gradients. 3. Implementation and method development

A solid-phase extraction method based on an ion-exchange retention mechanism has been used for in-line preconcentration of inorganic anions prior to their separation by capillary electrophoresis (CE). A single capillary containing a preconcentration and a separation zone has been used in a commercial CE instrument without instrumental modification. Analyte anions were retained on a preconcentration zone comprising an adsorbed layer of cationic latex particles, while separation was achieved in a separation zone comprising fused silica modified by adsorption of a cationic polymer. Elution of the adsorbed analytes was achieved using an eluotropic gradient formed by a transient isotachophoretic boundary between a fluoride electrolyte and a naphthalenedisulfonate electrolyte. Optimization of the electrolyte concentrations, sample injection times, and back-flushing times allowed the successful separation of sub-ppb levels of inorganic anions using a 100-min injection at 2 bar pressure, introducing over 40 capillary volumes of sample. A method based on a 10-min injection allowed a 100-fold increase in sensitivity over conventional hydrodynamic injection for Br-, I-, NO3-, CrO4(2-), and MoO4(2-) with a total analysis time of 25 min. Detection limits were dependent on the injection time but were in the range 2.2-11.6 ppb for a 10-min injection time. This approach was used to determine NO3- in Antarctic ice cores where the analysis could be performed using a sample volume 100 times less than that used for ion chromatography.