Chemiluminescence detection in integrated post-separation reactors for microchip-based capillary electrophoresis and affinity electrophoresis

Liquid phase detection in the miniature scale. Microfluidic and capillary scale measurement and separation systems. A tutorial review

Microfluidic and capillary devices are increasingly being used in analytical applications while their overall size keeps decreasing. Detection sensitivity for these microdevices gains more importance as device sizes and consequently, sample volumes, decrease. This paper reviews optical, electrochemical, electrical, and mass spectrometric detection methods that are applicable to capillary scale and microfluidic devices, with brief introduction to the principles in each case. Much of this is considered in the context of separations. We do consider theoretical aspects of separations by open tubular liquid chromatography, arguably the most potentially fertile area of separations that has been left fallow largely because of lack of scale-appropriate detection methods. We also examine the theoretical basis of zone electrophoretic separations. Optical detection methods discussed include UV/Vis absorbance, fluorescence, chemiluminescence and refractometry. Amperometry is essentially the only electrochemical detection method used in microsystems. Suppressed conductance and especially contactless conductivity (admittance) detection are in wide use for the detection of ionic analytes. Microfluidic devices, integrated to various mass spectrometers, including ESI-MS, APCI-MS, and MALDI-MS are discussed. We consider the advantages and disadvantages of each detection method and compare the best reported limits of detection in as uniform a format as the available information allows. While this review pays more attention to recent developments, our primary focus has been on the novelty and ingenuity of the approach, regardless of when it was first proposed, as long as it can be potentially relevant to miniature platforms.

Capillary electrophoresis-based immunoassay and aptamer assay: A review

Over the last two decades, the group of techniques called affinity probe CE has been widely used for the detection and the determination of several types of biomolecules with high sensitivity. These techniques combine the low sample consumption and high separation power of CE with the selectivity of the probe to the target molecule. The assays can be defined according to the type of probe used: CE immunoassays, with an antibody as the probe, or aptamer-based CE, with an aptamer as the probe. Immunoassays are generally divided into homogeneous and heterogeneous groups, and homogeneous variant can be further performed in competitive or noncompetitive formats. Interacting partners are free in solution at homogeneous assay, as opposed to heterogeneous analyses, where one of them is immobilized onto a solid support. Highly sensitive fluorescence, chemiluminescence or electrochemical detections were typically used in this type of study. The use of the aptamers as probes has several advantages over antibodies such as shorter generation time, higher thermal stability, lower price, and lower variability. The aptamer-based CE technique was in practice utilized for the determination of proteins in biological fluids and environmentally or clinically important small molecules. Both techniques were also transferred to microchip. This review is focused on theoretical principles of these techniques and a summary of their applications in research.

Recent advances in affinity capillary electrophoresis for binding studies

The present review covers recent advances and important applications of affinity capillary electrophoresis (ACE). It provides an overview about various ACE types, including ACE-MS, the multiple injection mode, the use of microchips and field-amplified sample injection-ACE. The most common scenarios of the studied affinity interactions are protein-drug, protein-metal ion, protein-protein, protein-DNA, protein-carbohydrate, carbohydrate-drug, peptide-peptide, DNA-drug and antigen-antibody. Approaches for the improvements of ACE in term of precision, rinsing protocols and sensitivity are discussed. The combined use of computer simulation programs to support data evaluation is presented. In conclusion, the performance of ACE is compared with other techniques such as equilibrium dialysis, parallel artificial membrane permeability assay, high-performance affinity chromatography as well as surface plasmon resonance, ultraviolet, circular dichroism, nuclear magnetic resonance, Fourier transform infrared, fluorescence, MS and isothermal titration calorimetry.

A personal stroll through the historical development of Canadian microfluidics

The historical background of microfluidics research within Canada is discussed, from the period 1990 to the present. The emphasis is on the recollections and perspectives of the author, D. Jed Harrison.

Light-emitting-diode-induced fluorescence detection of fluorescent dyes for capillary electrophoresis microchip with cross-polarization method

A cross-polarization scheme is presented to filter out the excitation light from the emission spectrum of fluorescent dyes using green light emitting diodes as a light source and a linear charge coupled device as an intensity detector. The excitation light was linearly polarized and was then used to illuminate the fluorescent dyes in the microchannels of a capillary electrophoresis microchip. The detector was shielded by the second polarizer, oriented perpendicular to the excitation light. The fluorescent signals from Rhodamine B dyes were measured in a dilution series with resulting emission signals and four different concentrations of fluorescent dyes were detected simultaneously with the same excitation source and detector. A limit-of-detection of 1 μM was demonstrated for Rhodamine B dye under the optimal conditions.

Chemiluminescent immunoassay of thyroxine enhanced by microchip electrophoresis

A homogeneous chemiluminescent immunoassay of thyroxine (T4) enhanced by microchip electrophoresis separation has been developed. The method deployed the competitive immunoreaction of T4 and horseradish peroxidase (HRP)-labeled T4 (HRP-T4) with anti-T4 mouse monoclonal antibody (Ab). HRP-T4 and the HRP-T4-Ab complex were separated and quantified by using microchip electrophoresis (MCE) with chemiluminescence (CL) detection. Highly sensitive CL detection was achieved by means of HPR-catalyzed luminol-H(2)O(2) reaction. Due to the effective MCE separation, the CL analytical signal was less prone to sample matrix interference. Under the selected assay conditions, the MCE separation was accomplished within 60s. The linear range for T4 was 5-250 nM with a detection limit of 2.2 nM (signal/noise ratio=3). The current method was successfully applied for the quantification of T4 in human serum samples. It was demonstrated that the current MCE-CL-enhanced competitive immunoassay was quick, sensitive, and highly selective. It may serve as a tool for clinical analysis of T4 to assist in the diagnosis of thyroid gland functions.

Quantification of biogenic amines by microchip electrophoresis with chemiluminescence detection

A highly sensitive microchip electrophoresis (MCE) method with chemiluminescence (CL) detection was developed for the determination of biogenic amines including agmatine (Agm), epinephrine (E), dopamine (DA), tyramine, and histamine in human urine samples. To achieve a high assay sensitivity, the targeted analytes were pre-column labeled by a CL tagging reagent, N-(4-aminobutyl)-N-ethylisoluminol (ABEI). ABEI-tagged biogenic amines after MCE separation reacted with hydrogen peroxide in the presence of horseradish peroxidase (HRP), producing CL emission. Since no CL reagent was added to the running buffer, the background of the CL detection was extremely low, resulting in a significant improvement in detection sensitivity. Detection limits (S/N=3) were in the range from 5.9x10(-8) to 7.7x10(-8) M for the biogenic amines tested, which were at least 10 times lower than those of the MCE-CL methods previously reported. Separation of a urine sample on a 7 cm glass/poly(dimethylsiloxane) (PDMS) microchip channel was completed within 3 min. Analysis of human urine samples found that the levels of Agm, E and DA were in the ranges of 2.61x10(-7) to 4.30x10(-7) M, 0.81x10(-7) to 1.12x10(-7) M, and 8.76x10(-7) to 11.21x10(-7) M (n=4), respectively.

Quantification of carnosine-related peptides by microchip electrophoresis with chemiluminescence detection

A microchip electrophoresis (MCE) method with chemiluminescence (CL) detection was developed for the determination of carnosine-related peptides, including carnosine, homocarnosine, and anserine, in biological samples. A simple integrated MCE-CL system was built to perform the assays. The highly sensitive CL detection was achieved by means of the CL reaction between hydrogen peroxide and N-(4-aminobutyl)-N-ethylisoluminol-tagged peptides in the presence of adenine as a CL enhancer and Co(2+) as a catalyst. Experimental conditions for analyte labeling, MCE separation, and CL detection were studied. MCE separation of the above-mentioned three peptides took less than 120 s. Detection limits (signal/noise ratio [S/N]=3) of 3.0x10(-8), 2.8x10(-8), and 3.4x10(-8) M were obtained for carnosine, anserine, and homocarnosine, respectively. The current MCE-CL method was applied for the determination of carnosine, anserine, and homocarnosine in human cerebrospinal fluid (CSF) and canine plasma. Homocarnosine was detected at the micromolar (microM) level in the CSF samples analyzed, whereas the levels of carnosine and anserine in these samples were below the detection limit of the assay. Interestingly, both carnosine and anserine were detected in the canine plasma samples, whereas homocarnosine was not.

Metal ion analysis using microchip CE with chemiluminescence detection based on 1,10-phenanthroline-hydrogen peroxide reaction

We developed a microchip CE method with chemiluminescence (CL) detection using the reaction of 1,10-phenanthroline and hydrogen peroxide for separation and determination of metal ions, where the metal ions acted as catalysts for the CL reaction. The microchip consisted of two microchannels that crossed at the intersection and four reservoirs that accessed the ends of the channels. The metal ions in the sample solution migrated in the channel along with 1,10-phenanthroline included in a running solution, and then mixed with hydrogen peroxide in one of the reservoirs to emit CL. The light was detected with a photomultiplier tube located just above the reservoir. Two metal ion groups, the platinum metal group (Ru(III), Rh(III), Pd(II), Os(VIII), Ir(III), and Pt(IV)) and the fourth periodic transition metal group (Cu(II), Fe(II), Co(II), and Ni(II)) were examined using the present system. The lowest detection limit was observed for Os(VIII); Os(VIII) responded over the range of 7.5x10(-12)-1.0x10(-8 )M with the detection limit of 7.5x10(-12 )M (about 38 zmol) (S/N = 3). The mixed solution of Ru(III), Rh(III), Pd(II), Os(VIII), Ir(III), and Pt(IV) could be analyzed using this system within about 2.5 min. In addition, the system was applied to the determination of Cu(II) concentration in a city water supply.

Integrated thin-film polymer/fullerene photodetectors for on-chip microfluidic chemiluminescence detection

We report the use of solution-processed thin-film organic photodiodes for microscale chemiluminescence. The active layer of the photodiodes comprised a 1 : 1 blend by weight of the conjugated polymer poly(3-hexylthiophene) [P3HT] and [6,6]-phenyl-C(61)-butyric acid-methylester [PCBM]--a soluble derivative of C(60). The devices had an active area of 1 mm x 1 mm, and a broad-band response from 350 to 700 nm, with an external quantum efficiency of more than 50% between 450 and 550 nm. The photodiodes have a simple layered structure that permits facile integration with planar chip-based systems. To evaluate the suitability of the organic devices as integrated detectors for microscale chemiluminescence, a peroxyoxalate based chemiluminescence reaction (PO-CL) was monitored within a poly(dimethyl-siloxane) (PDMS) microfluidic device. Quantitation of hydrogen peroxide indicated excellent linearity and yielded a detection limit of 10 microM, comparable with previously reported results using micromachined silicon microfluidic chips with integrated silicon photodiodes. The combination of organic photodiodes with PDMS microfluidic chips offers a means of creating compact, sensitive and potentially low-cost microscale CL devices with wide-ranging applications in chemical and biological analysis and clinical diagnostics.

Capillary electrophoresis immunoassay chemiluminescence detection of zeptomoles of bone morphogenic protein-2 in rat vascular smooth muscle cells

A capillary electrophoresis immunoassay (CEIA) method based on enhanced chemiluminescence (CL) detection was developed and applied to arteriosclerosis pathology research in the medical field. The system of enzyme-horseradish peroxidase (HRP) catalyzing the luminol/H2O2/p-iodophenol reaction was adopted in this paper. HRP was detected with the detection limit (S/N = 3) of 4.4 pM (53 zmol), which represents one of the highest sensitivities of HRP reported yet. HRP was first linked to bone morphogenic protein-2 (BMP-2) in rat vascular smooth muscle (VSM) cells with noncompetitive format and analyzed by CE-CL. HRP-Ab(2)-mAb-BMP-2 complexes can be baseline separated from free HRP in 3 min. The detection limit (S/N = 3) of BMP-2 is 6.2 pM (75 zmol). This technique has been successfully applied to arteriosclerosis development mechanistic study by investigating the change of BMP-2 content in VSM cells, which were stimulated by angiotensin II for different times. The change trends of BMP-2 contents are well in accord with that of the commonly used pathology image analysis system. It proves that the CEIA-CL technique proposed could be developed into a sensitive and new method for clinical assay and pathology research.

On-line chemiluminescence detection for isoelectric focusing of heme proteins on microchips

In this paper we present a sensitive chemiluminescence (CL) detection of heme proteins coupled with microchip IEF. The detection principle was based on the catalytic effects of the heme proteins on the CL reaction of luminol-H2O2 enhanced by para-iodophenol. The glass microchip and poly(dimethylsiloxane) (PDMS)/glass microchip for IEF were fabricated using micromachining technology in the laboratory. The modes of CL detection were investigated and two microchips (glass, PDMS/glass) were compared. Certain proteins, such as cytochrome c, myoglobin, and horseradish peroxidase, were focused by use of Pharmalyte pH 3-10 as ampholytes. Hydroxypropylmethylcellulose was added to the sample solution in order to easily reduce protein interactions with the channel wall as well as the EOF. The focused proteins were transported by salt mobilization to the CL detection window. Cytochrome c, myoglobin, and horseradish peroxidase were well separated within 10 min on a glass chip and the detection limits (S/N=3) were 1.2x10(-7), 1.6x10(-7), and 1.0x10(-10) M, respectively.

Capillary electrophoresis apparatus equipped with a bioluminescence detector using a batch- or flow-type detection cell

We developed a capillary electrophoresis (CE) apparatus equipped with a batch- or flow-type bioluminescence (BL) detection cell. Firefly luciferin-luciferase BL reaction was used to analyze samples of nucleotides, such as ATP, dATP, ADP, GTP, UTP, CTP, ITP, and TTP. In the CE apparatus with the batch-type cell, ATP was detected at concentrations of 5-100 microM, while the other nucleotides were not detected at concentrations less than 500 microM. The electropherogram of ATP included two BL peaks; the latter peak showed peculiar broadening, which continued up to ca. 2.5 h. In the CE apparatus with the flow-type cell, ATP, dATP, and ADP were detected with single peaks with detection limits of 1, 75, and 100 microM, respectively. The other nucleotides, GTP, UTP, CTP, ITP, and TTP, were not detected at concentrations less than 0.5 mM. A mixture of 10 microM ATP and 100 microM dATP was examined using the CE apparatus with the flow-type BL detection cell. ATP and dATP were separated using running buffer at pH 10 containing 1 mM phenylboronic acid. The interaction between ATP and phenylboronic acid delayed the migration time of ATP.

A microfluidic device using a green organic light emitting diode as an integrated excitation source

A simply fabricated microfluidic device using a green organic light emitting diode (OLED) and thin film interference filter as integrated excitation source is presented and applied to fluorescence detection of proteins. A layer-by-layer compact system consisting of glass/PDMS microchip, pinhole, excitation filter and OLED is designed and equipped with a coaxial optical fiber and for fluorescence detection a 300 microm thick excitation filter is employed for eliminating nearly 80% of the unwanted light emitted by OLEDs which has overlaped with the fluorescence spectrum of the dyes. The distance between OLED illuminant and microchannels is limited to approximately 1 mm for sensitive detection. The achieved fluorescence signal of 300 microM Rhodamine 6G is about 13 times as high as that without the excitation filter and 3.5 times the result of a perpendicular detection structure. This system has been used for fluorescence detection of Rhodamine 6G, Alexa 532 and BSA conjugates in 4% linear polyacrymide (LPA) buffer (in 1 x TBE, pH 8.3) and 1.4 fmol and 35 fmol mass detection limits at 0.7 nl injection volume for Alexa and Rhodamine dye have been obtained, respectively.

A sensitive and rapid immunoassay for quantification of CA125 in human sera by capillary electrophoresis with enhanced chemiluminescence detection

In this paper we have presented a sensitive and rapid immunoassay (IA) method by capillary electrophoresis with an enhanced chemiluminescence detection system (CE-CL) based on the catalytic effects of horseradish peroxidase (HRP) on the luminol-hydrogen peroxide reaction. The conditions for the CL reaction and electrophoresis were systematically investigated using HRP as a model sample. The linear range from 2.5 x 10(-11) to 1.0 x 10(-9) mol/L (R = 0.999), and the detection limit of 1.0 x 10(-12) mol/L (signal-to-noise ratio = 3) for HRP were achieved using para-iodophenol as CL enhancer. The relative standard deviations of the migration time and peak area for 5.0 x 10(-10) mol/L HRP (n = 7) were 0.26 and 4.8%, respectively, using a CE system with a home-built CL detector. Under the optimal condition, the HRP-labeled CA125 antibody (Ab) and the Ab-antigen complex were well separated within 4 min by CE using a high-pH buffer (pH 10.20). The assay was successfully used for quantification of CA125 in human sera from health controls and patients associated with ovarian cancer, and the recoveries of the standard addition experiments were 93-109%. Our primary results demonstrated that IA based on CE-CL detection is a powerful tool for clinical diagnosis combined with these commercial IA kits.

Surface-enhanced Raman scattering studies on immunoassay

Surface-enhanced Raman scattering (SERS) has recently been a matter of keen interest from the points of both basic science and applications because by using the SERS effect one can obtain Raman signals even from a single molecule. Immunoassay is one of the most promising fields in the applications of SERS, and the purpose of this review paper is to discuss the potential of SERS in immunoassay. This paper consists of four parts work on the indirect and direct methods of immunoassay via SERS. These methods provide the laboratorial attempts on biomedical diagnostic applications of SERS.

Capillary electrophoresis-based immunoassay

Capillary electrophoresis-based immunoassay (CEIA) is a developing analytical technique with a number of advantages over conventional immunoassay, such as reduced sample consumption, simpler procedure, easy simultaneous determination of multiple analytes, and short analysis time. However, there are still a number of technical issues that researchers on CEIA have to solve before the assay can be more widely used. These issues include method to improve the concentration sensitivity of the assay, requirement for robust separation strategy for different analytes, and method to increase the throughput of the assay. The approaches to solve these issues are reviewed. Several studies have been devoted to develop general separation strategies for CEIA, and to enhance the sensitivity of detection. The recent development of microchip-based CEIA is encouraging and is likely to address more drawbacks of CEIA, particularly on the throughput issue.

Introduction to micro-analytical systems: bioanalytical and pharmaceutical applications

This review presents a brief overview of recent developments in miniaturization of analytical instruments utilizing microfabrication technology. The concept 'Micro-Total Analysis Systems micro-TAS)', also termed 'Lab-on-a-chip', and the latest progresses in the development of microfabricated separation devices and on-chip detection techniques are discussed. Applications of micro-analytical methods to bioanalytical and pharmaceutical studies are also described, including chemical reactions, assays, and analytical separations of biomolecules in micro-scale.

Derivatization of biomolecules for chemiluminescent detection in capillary electrophoresis

An overview is presented on the power and drawbacks of the relatively unfamiliar chemiluminescence-based detection technique applied in analysis by capillary electrophoresis, for determining chemically derivatized biomolecules. Examples of the most common systems are given for many series of biologically active compounds as well as for some pharmaceuticals. The most common chemiluminescent systems include the application of peroxyoxalate ester chemiluminescence, acridinium esters, luminol and derivatives, detection based on the tris(2,2'-bipyridine)ruthenium(III) system, the huge potentials offered by direct oxidations-though often with still unelucidated reaction mechanisms-and the powerful area of bioluminescence techniques, revealing as well the fast developing area of microchip-based analysis employing this specific luminescence principle.

Analysis of inorganic and small organic ions with the capillary electrophoresis microchip

Capillary electrophoresis microchip devices are receiving considerable attention due to their versatility, portability, and sample handling capabilities. This article is a comprehensive review of the analysis of inorganic and small, charged organic species on microchip platforms. The application of conductivity, amperometry, laser-induced fluorescence, absorbance, and chemiluminescence detection methods are discussed. The potential utilization of these devices for miniaturized analytical systems is described.

Microchip electrophoresis-based separation of DNA

Miniaturized instruments have developed very quickly in the last decade. This review is focused on the microchip electrophoresis-based separation of DNA. Fundamentals, including the chip format, substrates and fabrication technologies, fluid control, as well as various detection methods, are summarized. Array electrophoresis microchip and the on-chip integration of electrophoresis with other systems are introduced as well. In addition, the application of microchip electrophoresis in DNA sizing, genetic analysis and DNA sequencing are also presented in this paper.

Biochips beyond DNA: technologies and applications

Technological advances in miniaturization have found a niche in biology and signal the beginning of a new revolution. Most of the attention and advances have been made with DNA chips yet a lot of progress is being made in the use of other biomolecules and cells. A variety of reviews have covered only different aspects and technologies but leading to the shared terminology of "biochips." This review provides a basic introduction and an in-depth survey of the different technologies and applications involving the use of non-DNA molecules such as proteins and cells. The review focuses on microarrays and microfluidics, but also describes some cellular systems (studies involving patterning and sensor chips) and nanotechnology. The principles of each technology including parameters involved in biochip design and operation are outlined. A discussion of the different biological and biomedical applications illustrates the significance of biochips in biotechnology.

Shah and sine convolution Fourier transform detection for microchannel electrophoresis with a charge coupled device

This paper describes an improved format for Shah convolution Fourier transform (SCOFT) detection that utilizes the spatial resolution of a charge-coupled device (CCD) rather than a fixed optical mask to perform a Shah or sine convolution over a fluorescence signal. The laser-induced fluorescence from a 9-mm section of microfabricated channel is collected with a CCD at 28 Hz. Each image frame is multiplied by a convolution function to modulate the collected signal through space. Each frame is then summed to generate an intensity-versus-time data set for Fourier analysis. The fluorescence signal oscillates at a frequency dependent upon both the convolution function multiplied across each data frame and the velocity of fluorescent microspheres or a plug of fluorescent dye flowing through the channel. This SCOFT technique affords more flexibility over formats that employ a physical mask and provides data that can be optimized for signal-to-noise (S/N) or resolution information. A 1,000-fold improvement in S/N is demonstrated for a plug of fluorescein dye. Detection of fluorescent beads exhibited frequency signals that were dependent upon the bead size distribution, the electric field, and the electrophoresis buffer concentration. Data are presented demonstrating the quantitation of fluorescent microspheres.

Batch-type chemiluminescence detection cell for sensitization and simplification of capillary electrophoresis

A simple and convenient chemiluminescence detection cell was designed for capillary electrophoresis. The detection cell easily combined with capillary electrophoresis equipment. Luminol chemiluminescence was adapted for use with the detection cell. Detailed analysis and testing of the system revealed that luminol could be determined over a range of 2.5 x 10(-10)-6.5 x 10(-7) M (correlation coefficient, 0.999), with a detection limit (S/N = 3) of 2.5 x 10(-10) M (7 amol). Furthermore, each component in a mixture of glycine, glycylglycine, and glycylglycylgycine, which were labeled with isoluminol isothiocyanate, was baseline separated and sensitively detected. Moreover, the stacking procedure was applied to postcolumn detection in capillary electrophoresis. When acetonitrile stacking was used under certain conditions in the present system, chemiluminescence intensities of luminol and labeled compounds were about 1 order of magnitude higher than those obtained without stacking. The detection limit for luminol was 1.5 x 10(-11) M (S/N = 3), representing the highest sensitivity of luminol yet reported. Finally, the effect of p-iodophenol as an enhancer of luminol chemiluminescence was examined under weak alkaline conditions. The chemiluminescence intensity of luminol was approximately 2 orders of magnitude higher than that in the unenhanced reaction. A preliminary immunoassay using horseradish peroxidase-labeled anti-mouse IgG was also developed.

Biomedical applications of protein chips

The development of microchips involving proteins has accelerated within the past few years. Although DNA chip technologies formed the precedent, many different strategies and technologies have been used because proteins are inherently a more complex type of molecule. This review covers the various biomedical applications of protein chips in diagnostics, drug screening and testing, disease monitoring, drug discovery (proteomics), and medical research. The proteomics and drug discovery section is further subdivided to cover drug discovery tools (on-chip separations, expression profiling, and antibody arrays), molecular interactions and signaling pathways, the identification of protein function, and the identification of novel therapeutic compounds. Although largely focused on protein chips, this review includes chips involving cells and tissues as a logical extension of the type of data that can be generated from these microchips.

Microfluidic enzyme immunoassay using silicon microchip with immobilized antibodies and chemiluminescence detection

Silicon microchips with immobilized antibodies were used to develop microfluidic enzyme immunoassays using chemiluminescence detection and horseradish peroxidase (HRP) as the enzyme label. Polyclonal anti-atrazine antibodies were coupled to the silicon microchip surface with an overall dimension of 13.1 x 3.2 mm, comprising 42 porous flow channels of 235-microm depth and 25-microm width. Different immobilization protocols based on covalent or noncovalent modification of the silica surface with 3-aminopropyltriethoxysilane (APTES) or 3-glycidoxypropyltrimethoxysilane (GOPS), linear polyethylenimine (LPEI, MW 750,000), or branched polyethylenimine (BPEI, MW 25,000), followed by adsorption or covalent attachment of the antibody, were evaluated to reach the best reusability, stability, and sensitivity of the microfluidic enzyme immunoassay (microFEIA). Adsorption of antibodies on a LPEI-modified silica surface and covalent attachment to physically adsorbed BPEI lead to unstable antibody coatings. Covalent coupling of antibodies via glutaraldehyde (GA) to three different functionalized silica surfaces (APTES-GA, LPEI-GA, and GOPS-BPEI-GA) resulted in antibody coatings that could be completely regenerated using 0.4 M glycine/HCl, pH 2.2. The buffer composition was shown to have a dramatic effect on the assay stability, where the commonly used phosphate buffer saline was proved to be the least suitable choice. The best long-term stability was obtained for the LPEI-GA surface with no loss of antibody activity during one month. The detection limits in the microFEIA for the three different immuno surfaces were 45, 3.8, and 0.80 ng/L (209, 17.7, and 3.7 pM) for APTES-GA, LPEI-GA, and GOPS-BPEI-GA, respectively.

Ultrasensitive chemiluminescence detection in capillary electrophoresis

Capillary electrophoresis techniques offer high plate numbers and are highly suited for the efficient separations of a wide variety of chemical components in diverse matrices. Because of the small capillary and detection cell dimensions, together with the minute volumes of samples to be injected, sensitive detection schemes based on different physicochemical principles are being developed. One logical approach to increased sensitivity in capillary electrophoresis detection has been the development of chemiluminescence-based detectors. The development of on-line ultrasensitive chemiluminescence detection (referred to the concentration detection limit of nM order of magnitude or mass detection limit of amol order of magnitude) in capillary electrophoresis system is reviewed. The applications and limitations of the current detection methodology are briefly considered and future prospects for the development are discussed.

Microfluidic chips for clinical and forensic analysis

This review gives an overview of developments in the field of microchip analysis for clinical diagnostic and forensic applications. The approach chosen to review the literature is different from that in most microchip reviews to date, in that the information is presented in terms of analytes tested rather than microchip method. Analyte categories for which examples are presented include (i) drugs (quality control, seizures) and explosives residues, (ii) drugs and endogenous small molecules and ions in biofluids, (iii) proteins and peptides, and (iv) analysis of nucleic acids and oligonucleotides. Few cases of microchip analysis of physiological samples or other "real-world" matrices were found. However, many of the examples presented have potential application for these samples, especially with ongoing parallel developments involving integration of sample pretreatment onto chips and the use of fluid propulsion mechanisms other than electrokinetic pumping.