Serum procainamide analysis based on acetonitrile stacking by capillary electrophoresis

A review of developments in the methodology and application of microemulsion electrokinetic chromatography

MEEKC is a mode of CE, which utilizes microemulsion (ME) as the BGE to achieve separation of a diverse range of analytes. MEs are composed of nanometer-sized oil droplets suspended in aqueous buffer which are stabilized by the presence of a surfactant and co-surfactant. These MEs are commonly referred to as oil-in-water MEs and their application in MEEKC has been extensively examined. This review details advances in the theory, methodology, and application of MEEKC during the period 2010-2012. Areas covered include online sample concentration, advances in chiral separations, use of coated capillaries, chemometric approaches, and the use of novel additives to the ME system. This review also provides the reader with an introduction to MEEKC and a presentation of recent applications.

Recent advances in the methodology, optimisation and application of MEEKC

MEEKC is an electrodriven separation technique. Oil-in-water microemulsions (MEs) and to a lesser extent water-in-oil MEs have been used in MEEKC as BGEs to achieve separation of a diverse range of solutes. The more common (oil-in-water) MEs are composed of nanometre-sized droplets of oil suspended in an aqueous buffer. Interfacial tension between the oil and aqueous phase is reduced close to zero by the presence of a surfactant and a co-surfactant. MEEKC is capable of providing fast and efficient separations for a wide range of acidic, basic and neutral, water-soluble and -insoluble compounds. This review details the advances in MEEKC-based separations from the period 2006 to 2008. Areas covered include online sample concentration, chiral separation, suppressed electroosmosis MEEKC, MEEKC-MS, and the use of MEEKC in predicting migration behaviour and solute characteristics. A fundamental introduction to MEEKC, along with the presentation and discussion of recent applications is also included.

Sequential preconcentration by coupling of field amplified sample injection with pseudo isotachophoresis-acid stacking for analysis of alkaloids in capillary electrophoresis

A novel on-column sequential preconcentration method based on the combination of field-amplified sample injection induced by acetonitrile and pseudo isotachophoresis (ITP)-acid stacking is developed for simply but efficiently concentrating alkaloid cations in a high-salt sample matrix in capillary electrophoresis. Acetonitrile (70%) added to a sample solution with a high-salt sample matrix not only induces field-amplified sample stacking by decreasing conductivity but also acts as a termination reagent in the succeeding pseudo ITP. After sample injection had been completed, a plug of H(+) was injected electrokinetically and a neutralization reaction between H(+) and tartrate from the buffer solution produced a low conductivity zone, in which the injected analyte cations were further concentrated. With the sequential preconcentration method, a 3 orders of magnitude detection sensitivity (1,400-fold) increase could be observed compared with the conventional electrokinetic injection method, without compromising separation efficiency and peak shape, and detection limits of 0.1 ng/mL for myosmine and 0.3 ng/mL for anabasine with the conditions selected were achieved. The calibration curves demonstrated good linearity in the concentration ranges 1.3-600 ng/mL for myosmine and 4.9-900 ng/mL for anabasine, respectively. The proposed method has been used to analyze successfully trace alkaloids in cigarette samples.

Anion-selective exhaustive injection-sweeping microemulsion electrokinetic chromatography

In this study, anion-selective exhaustive injection-sweeping (ASEI-sweeping) technique, which is a selective on-line sample concentration technique, was first proposed in microemulsion electrokinetic chromatography (MEEKC) for analyses of eight acidic phenolic compounds. In contrast to a capillary that is typically filled with nonmicellar background solution in conventional ASEI-sweeping MEKC method, in the proposed ASEI-sweeping MEEKC method, a capillary is filled with a low pH microemulsion solution (pH 2.0), and then with a short acid plug (pH 2.0, 1.9 cm) before field-amplified sample injection. This proposed design has two functions. First, the microemulsion solution that is present at the front of capillary column is able to avoid phase separation of microemulsion solution during MEEKC separation. Second, the presence of the short acid plug would effectively limit the partition behavior of acid analytes with the oil droplets in the microemulsion during field-amplified sample injection; otherwise, the stacking effect of acid analytes would be markedly reduced. This optimal ASEI-sweeping MEEKC method afforded about 96,000-fold to 238,000-fold increases in detection sensitivity in terms of peak areas without any separation efficiency loss when compared to normal MEEKC separation. Furthermore, trace levels (about 3 ng/g) of gallic acid and catechin in foods were also detected successfully by the proposed ASEI-sweeping MEEKC technique.

Capillary electrophoresis at the omics level: Towards systems biology

Emerging systems biology aims at integrating the enormous amount of existing omics data in order to better understand their functional relationships at a whole systems level. These huge datasets can be obtained through advances in high-throughput, sensitive, precise, and accurate analytical instrumentation and technological innovation. Separation sciences play an important role in revealing biological processes at various omic levels. From the perspective of systems biology, CE is a strong candidate for high-throughput, sensitive data generation which is capable of tackling the challenges in acquiring qualitative and quantitative knowledge through a system-level study. This review focuses on the applicability of CE to systems-based analytical data at the genomic, transcriptomic, proteomic, and metabolomic levels.

Quantitative study on selective stacking of zwitterions in large-volume sample matrix by moving reaction boundary in capillary electrophoresis

The paper advanced the theoretical procedures for quantitative design on selective stacking of zwitterions in full capillary sample matrix by a cathodic-direction moving reaction boundary (MRB) in capillary electrophoresis (CE) under control of electroosmotic flow (EOF). With the procedures, we conducted the theoretical computations on the selective stacking of two test analytes of L-histidine (His) and L-tryptophan (Trp) by the MRB created with 30 mM pH 3.0 formic acid-NaOH buffer and 2-80 mM sodium formate. The results revealed the following three predictions. At first, the MRB cannot stack His and Trp plugs if less than 12.5 mM sodium formate is used to form the MRB and prepare the sample matrix. Second, the MRB can stack His and/or Trp sample plugs completely if higher than 50 mM sodium formate is chosen to form the MRB. Third, the MRB can only focus His plug completely, but stack Trp plug partially if 20-50 mM sodium formate is used; this implied the complete MRB-induced selective stacking to His rather than Trp. All the three predictions were quantitatively proved by the experiments. With great dilution of sample matrix and control of EOF, controllable, simultaneous and MRB-induced selective stacking and separation of zwitterions were achieved. The theoretical results hold evident significances to the quantitative design of selective stacking conditions and the increase of detection sensitivity of zwitterions in CE. In addition, the control of EOF by cetyltrimethylammonium bromide (CTAB) can evidently improve the stacking efficiency to both His and Trp.

Biomedical applications of capillary electrophoresis

Capillary electrophoresis (CE) is a technique well suited for several separation problems in the life sciences. The main advantages are the higher separation efficacy in comparison to chromatographic methods and the smaller sample volume required. However, due to the limited sensitivity of CE, HPLC remains the method most commonly used for the analysis of drugs in biological fluids. For endogenous compounds like DNA, proteins, or small molecules like purines, CE offers clear advantages over conventional methods and, especially for DNA, CE has already been introduced into clinical routine. Some selected applications will be discussed.

Handling and detection of 0.8 amol of a near-infrared cyanine dye by capillary electrophoresis with laser-induced fluorescence detection

We are interested in the detection of DNA adducts and other trace analytes by labeling them with a fluorescent tag followed by use of capillary electrophoresis with laser-induced fluorescence detection (CE-LIF) for high resolution and sensitivity. Towards this goal, here we report the following: (1) synthesis and handling properties of a near-IR, carboxyl-substituted heptamethine cyanine dye; (2) modification of an existing ball lens LIF detector to provide near-LIF detection with excitation at 785 nm for CE; and (3) corresponding handling and detection of as little as 0.8 amol of the dye by enrich-injection of 4.7 microl of 1 x 10(-13) mol/l dye in methanol from an 8-microl volume into a corresponding CE-LIF system. The electrolyte for the separation was methanol-40 mmol/l aqueous sodium borate (98:2, v/v). This finding encourages further exploration of the dye by functionalization of its carboxyl group for chemical labeling purposes.

Electrophoretic analysis of amines using reversed-phase, reversed-polarity, head-column field-amplified sample stacking and laser-induced fluorescence detection

This paper describes the use of reversed-phase, reversed-polarity head-column field-amplified sample stacking (HCFASS) for on-line sample concentration in conventional capillary electrophoresis. The effective stacking efficiency was determined as a function of sodium hydroxide concentration in the sample matrix. Results concur with theoretical predictions where stacking efficiency depends on the conductivity (electric field strength) and electrophoretic mobility in the sample matrix solution. Fluorescein isothiocyanate-derivatized aniline and 2,4-dimethylaniline were dissolved in sodium hydroxide (800 microM), separated in a phosphate running buffer (0.05 M, pH 9.0) and detected utilising laser-induced fluorescence. The use of reversed-phase, reversed-polarity HCFASS with laser-induced fluorescence detection yielded sensitivity improvements with respect to normal injection schemes in excess of three orders of magnitude, and a limit of detection as low as 10(-13) M.

Stacking ionizable analytes in a sample matrix with high salt by a transient moving chemical reaction boundary method in capillary zone electrophoresis

The paper presents a novel on-line transient moving chemical reaction boundary method (tMCRBM) for simply but efficiently stacking ionizable analytes in high-salt matrix in capillary zone electrophoresis (CZE). The powerful function and stability of the tMCRBM are elucidated with the ionizable test analytes of L-phenylalanine (Phe) and L-tryptophan (Trp) in the matrix with 85.6-165.6 mM sodium ion and further compared with the normal CZE of Phe and Trp samples dissolved in running buffer. The results verify that (1) the on-line tMCRBM mode can evidently increase separation efficiency, peak height, and resolution, (2) with the mode, the analytes in a 28-cm high-salt matrix plug can be stacked successfully and further separated well, (3) the values of relative standard deviation of peak height, peak area, and migrating time range from 3.9% to 6.1%; the results indicate the high stability of the technique of tMCRBM-CZE. The techniques implies obvious potential significance for those ionizable analytes, e.g., protein, peptide, and weak alkaline or acidic compound, in such matrixes as serum, urine, seawater, and wastewater, with high salt, which has a deleterious effect on isotachophoresis (ITP) and especially on electrostacking and field-amplified sample injection (FASI). The mechanism of stacking of zwitterionic analytes in a high-salt matrix by the tMCRBM relies on non-steady-state isoelectric focusing (IEF) but not on transient ITP, electrostacking, and FASI.

Influence of buffer composition and sample pretreatment on efficiency separation for monitoring neuropeptides in plasma using capillary electrophoresis

More efficient and faster separation conditions for qualitative as well as quantitative analysis of neuropeptides in human plasma using capillary zone electrophoresis (CZE) have been developed. The analysis method for neuropeptides has been improved specifically to study thyroid hormone related neuropetides for the regulation of thyroid disease. In this study, we investigated the pretreatment methods, composition of the running buffer and rinsing procedures between runs in order to obtain more sensitive and faster separation of trace neuropeptides in plasma by CZE. The tested neuropeptides were somatostatin (SOMA), vasopressin (VP), neurotensin (NT), and thyrotropin-releasing hormone (TRH). Plasma samples were pretreated by deproteinization and solid-phase extraction method. The fraction of neuropeptides was reconstituted in 40% acetonitrile followed by ultrafiltration, and then analyzed by CZE. Resolution and sensitivity was improved using the separation buffer composition with 100 mM Tris-phosphate buffer (pH 2.0) while the sensitivity was further improved via a stacking method using the sample buffer of 40% acetonitrile. These sample pretreatment methods and buffer condition permit quantitative analysis on tested neuropeptides at the 20 ng/mL level. The rinsing procedures between runs using 90% ethanol dramatically shortened the rinsing time to 30 min.

Capillary electrophoretic separation, immunochemical recognition and analysis of the diastereomers quinine and quinidine and two quinidine metabolites in body fluids

The capillary electrophoretic separation and immunochemical recognition of the two naturally fluorescing, cationic diastereomers quinine (QN) and quinidine (QD), their hydroderivatives and two major QD metabolites (3-hydroxyquinidine and quinidine-N-oxide) was investigated. Plain aqueous phosphate buffers and an alkaline buffer containing dodecyl sulfate micelles are shown to be incapable of resolving the two diastereomers. However, incorporation of an additional chemical equilibrium (with beta-cyclodextrin) in the case of capillary zone electrophoresis (CZE) and the presence of a small amount of an organic solvent as buffer modifier (2-propanol) in dodecyl sulfate based micellar electrokinetic capillary chromatography (MECC), were found to provide separation media which lead to complete resolution of QN, QD and the other compounds of interest. Furthermore, for MECC- and CZE-based immunoassay formats, a commercially available antibody against QD was found to be a perfect discriminator between QD and QN. It was determined to recognize QD and the two QD metabolites (cross reactivity of 20--30%) but not QN. MECC and CZE with laser induced fluorescence (LIF) detection are shown to be suitable to determine QD and metabolites in urine and plasma (quinidine-N-oxide only) collected after single dose intake of 50 mg QD sulfate and of QN in urine, saliva and serum samples that were collected after self-administration of 0.5 l of quinine water (25 mg of QN). With direct injection of a body fluid, MECC with LIF was found to provide 10 ng/ml detection limits for QD and QN. This ppb sensitivity is comparable to that obtained in HPLC assays that are based upon drug extraction. Furthermore, MECC and CZE assays with UV detection are shown to provide the ppm sensitivity required for therapeutic drug monitoring and clinical toxicology of QD and QN.

Electrophoresis of cereal storage proteins

Cereal proteins have been studied by a number of analytical techniques over the years. One of the major methodologies utilized by cereal chemists has been electrophoresis. Starting with moving boundary electrophoresis and progressing to slab gels and high-performance capillary electrophoresis, innovative methods have been developed to provide high resolution separations of difficult to separate proteins. Sodium dodecyl sulfate (SDS)-polyacrylamide gel electrophoresis (PAGE), acid-PAGE, isoelectric focusing, free zone CE, and even high-resolution two-dimensional HPLC-HPCE methods have been developed to separate cereal proteins. This review focuses on electrophoretic methods for separating and characterizing cereal storage proteins.

Capillary electrophoresis of drugs: current status in the analysis of pharmaceuticals

The current status of capillary electrophoresis (CE) in pharmaceutical analyses is reviewed with about 300 references, mainly from 1996 until 1999. This article covers the use of CE for assay and purity determination of the main component, analysis of natural medicines, antisense DNA, peptides, and proteins. Analysis of hydrophobic and/or electrically neutral drugs by electrokinetic chromatography, capillary electrochromatography and nonaqueous CE is critically evaluated. Detailed techniques for the separation of enantiomers are given in the text with some actual applications. Furthermore, this review includes sensitivity and regulatory aspects for the actual use of CE in new drug applications (NDA). The analytical validation required for CE in NDA is also treated.