A concept for miniaturized 3-D cell culture using an extracellular matrix gel

Challenges of applying multicellular tumor spheroids in preclinical phase

The three-dimensional (3D) multicellular tumor spheroids (MCTs) model is becoming an essential tool in cancer research as it expresses an intermediate complexity between 2D monolayer models and in vivo solid tumors. MCTs closely resemble in vivo solid tumors in many aspects, such as the heterogeneous architecture, internal gradients of signaling factors, nutrients, and oxygenation. MCTs have growth kinetics similar to those of in vivo tumors, and the cells in spheroid mimic the physical interaction of the tumors, such as cell-to-cell and cell-to-extracellular matrix interactions. These similarities provide great potential for studying the biological properties of tumors and a promising platform for drug screening and therapeutic efficacy evaluation. However, MCTs are not well adopted as preclinical tools for studying tumor behavior and therapeutic efficacy up to now. In this review, we addressed the challenges with MCTs application and discussed various efforts to overcome the challenges.

Spontaneous and Induced Animal Models for Cancer Research

Considering the complexity of the current framework in oncology, the relevance of animal models in biomedical research is critical in light of the capacity to produce valuable data with clinical translation. The laboratory mouse is the most common animal model used in cancer research due to its high adaptation to different environments, genetic variability, and physiological similarities with humans. Beginning with spontaneous mutations arising in mice colonies that allow for pursuing studies of specific pathological conditions, this area of in vivo research has significantly evolved, now capable of generating humanized mice models encompassing the human immune system in biological correlation with human tumor xenografts. Moreover, the era of genetic engineering, especially of the hijacking CRISPR/Cas9 technique, offers powerful tools in designing and developing various mouse strains. Within this article, we will cover the principal mouse models used in oncology research, beginning with behavioral science of animals vs. humans, and continuing on with genetically engineered mice, microsurgical-induced cancer models, and avatar mouse models for personalized cancer therapy. Moreover, the area of spontaneous large animal models for cancer research will be briefly presented.

Microfluidic Platform for the Long-Term On-Chip Cultivation of Mammalian Cells for Lab-On-A-Chip Applications

Lab-on-a-Chip (LoC) applications for the long-term analysis of mammalian cells are still very rare due to the lack of convenient cell cultivation devices. The difficulties are the integration of suitable supply structures, the need of expensive equipment like an incubator and sophisticated pumps as well as the choice of material. The presented device is made out of hard, but non-cytotoxic materials (silicon and glass) and contains two vertical arranged membranes out of hydrogel. The porous membranes are used to separate the culture chamber from two supply channels for gases and nutrients. The cells are fed continuously by diffusion through the membranes without the need of an incubator and low requirements on the supply of medium to the assembly. The diffusion of oxygen is modelled in order to find the optimal dimensions of the chamber. The chip is connected via 3D-printed holders to the macroscopic world. The holders are coated with Parlyene C to ensure that only biocompatible materials are in contact with the culture medium. The experiments with MDCK-cells show the successful seeding inside the chip, culturing and passaging. Consequently, the presented platform is a step towards Lab-on-a-Chip applications that require long-term cultivation of mammalian cells.

Establishment and characterization of intraperitoneal xenograft models by co-injection of human tumor cells and extracellular matrix gel

Establishing a feasible intraperitoneal (i.p.) xenograft model in nude mice is a good strategy to evaluate the antitumor effect of drugs in vivo. However, the manipulation of human cancer cells in establishing a stable peritoneal carcinomatosis model in nude mice is problematic. In the present study, the ovarian and colorectal peritoneal tumor models were successfully established in nude mice by co-injection of human tumor cells and extracellular matrix gel. In ovarian tumor models, the mean number tumor nodes was significantly higher in the experimental group (intraperitoneal tumor cell co-injection with ECM gel) compared with the PBS control group on the 30th day (21.0±3.0 vs. 3.6±2.5; P<0.05). The same results were observed in the colorectal peritoneal tumor models on the 28th day. The colorectal peritoneal tumor model was further used to evaluate the chemotherapy effect of irinotecan (CPT-11). The mean weight of peritoneal tumor nodes in CPT-11 treatment group was significantly less than that of the control group (0.81±0.16 vs. 2.18±0.21 g; P<0.05). The results confirmed the value of these i.p. xenograft models in nude mice as efficient and feasible tools for preclinical evaluation.

3D spherical microtissues and microfluidic technology for multi-tissue experiments and analysis

Rational development of more physiologic in vitro models includes the design of robust and flexible 3D-microtissue-based multi-tissue devices, which allow for tissue-tissue interactions. The developed device consists of multiple microchambers interconnected by microchannels. Pre-formed spherical microtissues are loaded into the microchambers and cultured under continuous perfusion. Gravity-driven flow is generated from on-chip reservoirs through automated chip-tilting without any need for additional tubing and external pumps. This tilting concept allows for operating up to 48 devices in parallel in order to test various drug concentrations with a sufficient number of replicates. For a proof of concept, rat liver and colorectal tumor microtissues were interconnected on the chip and cultured during 8 days in the presence of the pro-drug cyclophosphamide. Cyclophosphamide has a significant impact on tumor growth but only after bio-activation by the liver. This effect was only observed in the perfused and interconnected co-cultures of different microtissue types on-chip, whereas the discontinuous transfer of supernatant via pipetting from static liver microtissues that have been treated with cyclophosphamide did not significantly affect tumor growth. The results indicate the utility and multi-tissue functionality of this platform. The importance of continuous medium circulation and tissue interaction is highlighted.

‘Body-on-a-Chip’ Technology and Supporting Microfluidics

In order to effectively streamline current drug development protocols, there is a need to generate high information content preclinical screens capable of generating data with a predictive power in relation to the activity of novel therapeutics in humans. Given the poor predictive power of animal models, and the lack of complexity and interconnectivity of standard in vitro culture methodologies, many investigators are now moving toward the development of physiologically and functionally accurate culture platforms composed of human cells to investigate cellular responses to drug compounds in high-throughput preclinical studies. The generation of complex, multi-organ in vitro platforms, built to recapitulate physiological dimensions, flow rates and shear stresses, is being investigated as the logical extension of this drive. Production and application of a biologically accurate multi-organ platform, or ‘body-on-a-chip’, would facilitate the correct modelling of the dynamic and interconnected state of living systems for high-throughput drug studies as well as basic and applied biomolecular research. This chapter will discuss current technologies aimed at producing ‘body-on-a-chip’ models, as well as highlighting recent advances and important challenges still to be met in the development of biomimetic single-organ systems for drug development purposes.

Microfabricated mammalian organ systems and their integration into models of whole animals and humans

While in vitro cell based systems have been an invaluable tool in biology, they often suffer from a lack of physiological relevance. The discrepancy between the in vitro and in vivo systems has been a bottleneck in drug development process and biological sciences. The recent progress in microtechnology has enabled manipulation of cellular environment at a physiologically relevant length scale, which has led to the development of novel in vitro organ systems, often termed 'organ-on-a-chip' systems. By mimicking the cellular environment of in vivo tissues, various organ-on-a-chip systems have been reported to reproduce target organ functions better than conventional in vitro model systems. Ultimately, these organ-on-a-chip systems will converge into multi-organ 'body-on-a-chip' systems composed of functional tissues that reproduce the dynamics of the whole-body response. Such microscale in vitro systems will open up new possibilities in medical science and in the pharmaceutical industry.

The future of microfluidic assays in drug development

BACKGROUND

Microfluidic technology emerges as a convenient route to applying automated and reliable assays in a high-throughput manner with low cost.

OBJECTIVE

This review aims to answer questions related to the capabilities and potential applications of microfluidic assays that can benefit the drug development process and extends an outlook on its future trends.

METHODS

This article reviews recent publications in the field of microfluidics, with an emphasis on novel applications for drug development.

RESULTS/CONCLUSION

Microfluidics affords unique capabilities in sample preparation and separation, combinatorial synthesis and array formation, and incorporating nanotechnology for more functionalities. The pharmaceutical industry, facing challenges from limited productivity and accelerated competition, can thus greatly benefit from applying new microfluidic assays in various drug development stages, from target screening and lead optimization to absorption distribution metabolism elimination and toxicity studies in preclinical evaluations, diagnostics in clinical trials and drug formulation and manufacturing process optimization.

Microplate-reader compatible perfusion microbioreactor array for modular tissue culture and cytotoxicity assays

One important application of tissue engineering is to provide novel in vitro models for cell-based assays. Perfusion microbioreactor array provides a useful tool for microscale tissue culture in parallel. However, high-throughput data generation has been a challenge. In this study, a 4 x 4 array of perfusion microbioreactors was developed for plate-reader compatible, time-series quantification of cell proliferation, and cytotoxicity assays. The device was built through multilayer soft lithography. Low-cost nonwoven polyethylene terephthalate fibrous matrices were integrated as modular tissue culture scaffolds. Human colon cancer HT-29 cells with stable expression of enhanced green fluorescent protein were cultured in the device with continuous perfusion and reached a cell density over 5 x 10(7) cells/mL. The microbioreactor array was used to test a chemotherapeutic drug 5-FU for its effect on HT-29 cells in continuous perfusion 3D culture. Compared with conventional 2D cytotoxicity assay, significant drug resistance was observed in the 3D perfusion culture.

Antioxidant properties of breast milk in a novel in vitro digestion/enterocyte model

OBJECTIVES

There is good evidence to suggest that human breast milk has antioxidant properties. Our primary goal was to investigate the antioxidant properties of human milk in a combined in vitro digestion/cell culture model that more closely replicates conditions in the gastrointestinal system of the preterm infant.

MATERIALS AND METHODS

An in vitro digestion model was developed that incorporates both gastric and intestinal phases, based on reported luminal pH, digestive enzyme levels, and transit times observed in preterm infants. To mimic the human intestinal mucosa, 2 cell lines--Caco-2BBE and HT29-MTX--were cocultured on Matrigel, an artificial basement membrane substrate. Intracellular oxidative stress was measured with 2 broadly selective oxidant-sensitive dyes, and oxidative DNA damage was assessed by means of single-cell gel electrophoresis.

RESULTS

Enterocyte differentiation and mucin secretion were observed by 14 seeding of cultures. Direct exposure to digested milk resulted in a loss of transepithelial electrical resistance; however, exogenous mucin mitigated this loss. Data suggested that both milk and digested milk alleviated oxidative stress in the coculture, and both reduced hydrogen peroxide-induced oxidative DNA damage, as demonstrated by the comet assay.

CONCLUSIONS

Our results support the hypothesis that breast milk reduces oxidative stress in a cell culture model representative of the intestinal mucosa, and also confirmed the suitability of this combined in vitro digestion/cell culture system for investigating the physiologic effects of enteral nutrients such as breast milk, under conditions similar to those existing in the gastrointestinal system of the preterm infant.

Inhibition of the expression on MMP-2, 9 and morphological changes via human fibrosarcoma cell line by 6,6'-bieckol from marine alga Ecklonia cava

Matrix Metalloproteinases (MMPs) are a family of zinc-endopeptidases which can degrade extracellular matrix (ECM) components and play important roles in a variety of biological and pathological processes. 6,6'-bieckol isolated and characterized from an edible marine brown alga Ecklonia cava (EC), according to the comprehensive spectral analysis of MS and NMR data. Here the influence of 6,6'-bieckol on expressions of MMPs was examined by zymography and western blot analysis via human fibrosarcoma cell line (HT1080). It is shown that 6,6'-bieckol significantly down regulated the expressions of MMP-2 and -9 in dose-dependent manner. The influence of 6,6'-bieckol on the cell viability and cell behavior of HT1080 cells were also investigated, our dates shown that it suppressed the migration and 3D culture in HT1080 cells. Meanwhile, we explored several signal pathways which may contribute to this process, and found the suppressing of MMPs expressions in HT1080 cells might be due to the suppression of NF-kappaB signal pathway. [BMB reports 2010; 43(1): 62-68].

Quantification of chemical-polymer surface interactions in microfluidic cell culture devices

Microfluidic cell culture devices have been used for drug development, chemical analysis, and environmental pollutant detection. Because of the decreased fluid volume and increased surface area to volume ratio, interactions between device surfaces and the fluid is a key element that affects the performance and detection accuracy of microfluidic devices, particularly if fluid is recirculated by a peristaltic pump. However, this issue has not been studied in detail in a microfluidic cell culture environment. In this study, chemical loss and contaminant leakage from various polymer surfaces in a microfluidic setup were characterized. The effects of hydrophilic coating with Poly (vinyl alcohol), Pluronic(R) F-68, and multi-layer ionic coating were measured. We observed significant surface adsorption of estradiol, doxorubicin, and verapamil with PharMed BPT tubing, whereas PTFE/BPT and stainless steel/BPT hybrid tubing caused less chemical loss in proportion to the fraction of BPT tubing in the hybrid system. Contaminants leaching out of the BPT tubing were found to be estrogen receptor agonists as determined by estrogen-induced green fluorescence expression in an estrogen responsive Ishikawa cell line and also caused interference with an estradiol enzyme-linked immunosorbent assay (ELISA) assay. Stainless steel/BPT hybrid tubing caused the least interference with ELISA. In summary, polymer surface and chemical interactions inside microfluidic systems should not be neglected and require careful investigations when results from a microfluidic system are compared with results from a macroscale cell culture setup.

A micro cell culture analog (microCCA) with 3-D hydrogel culture of multiple cell lines to assess metabolism-dependent cytotoxicity of anti-cancer drugs

A microfluidic device with 3-D hydrogel cell cultures has been developed to test the cytotoxicity of anti-cancer drugs while reproducing multi-organ interactions. In this device, a micro cell culture analog (microCCA), cells embedded in 3-D hydrogels are cultured in separate chambers representing the liver, tumor, and marrow, which are connected by channels mimicking blood flow. While the microfluidic network provides a platform for mimicking the pharmacokinetic and pharmacodynamic profiles of a drug in humans, the 3-D hydrogel provides a more physiologically realistic environment to mimic the tissue than monolayer culture. Colon cancer cells (HCT-116) and hepatoma cells (HepG2/C3A) were encapsulated in Matrigel and cultured in the tumor and the liver chamber in a microCCA, respectively. Myeloblasts (Kasumi-1) were encapsulated in alginate in the marrow chamber; a stiffer hydrogel was necessary to prevent cell migration out of the matrix. The cytotoxic effect of Tegafur, an oral prodrug of 5-fluorouracil (5-FU), on each cell line was tested using the microCCA with cell-embedded hydrogel. The comparison of experimental results using a 96-well microtiter plate and a microCCA demonstrated that the microCCA was able to reproduce the metabolism of Tegafur to 5-FU in the liver and consequent death of cells by 5-FU, while the cultures in a 96-well microtiter plate were unable to do so. The microCCA utilizing 3-D hydrogel cell cultures has potential as a platform for pharmacokinetic-based drug screening in a more physiologically realistic environment.

Stir-baked Fructus gardeniae (L.) extracts inhibit matrix metalloproteinases and alter cell morphology

Matrix metalloproteinases (MMPs) play vital roles in many pathological conditions, including cancer, cardiovascular disease, arthritis and inflammation. Modulating MMP activity may therefore be a useful therapeutic approach in treating these diseases. Qing-Kai-Ling is a popular Chinese anti-inflammatory formulation used to treat symptoms such as rheumatoid arthritis, acute hypertensive cerebral hemorrhage, hepatitis and upper respiratory tract infection. In this paper, we report that one of the components of Qing-Kai-Ling, Fructus gardeniae, strongly inhibits MMP activity. The IC50 values for the primary herbal extract and water extract against MMP-16 were 32 and 27 microg/ml, respectively. In addition, we show that the herbal extracts influence HT1080 human fibrosarcoma cell growth and morphology. These data may provide molecular mechanisms for the therapeutic effects of Qing-Kai-Ling and herbal medicinal Fructus gardeniae.

Real-time microfluidic system for studying mammalian cells in 3D microenvironments

We describe a microfluidic system that can control, in real time, the microenvironments of mammalian cells in naturally derived 3D extracellular matrix (ECM). This chip combines pneumatically actuated valves with an individually addressable array of 3D cell-laden ECM; actuation of valves determines the pathways for delivering reagents through the chip and for exchanging diffusible factors between cell chambers. To promote rapid perfusion of reagents through 3D gels (with complete exchange of reagents within the gel in seconds), we created conduits above the gels for fluid flow, and microposts to stabilize the gels under high perfusion rates. As a biological demonstration, we studied spatially segregated mouse embryonic stem cells and mouse embryonic fibroblasts embedded in 3D Matrigel over days of culture. Overall, this system may be useful for high-throughput screening, single-cell analysis and studies of cell-cell communication, where rapid control of 3D cellular microenvironments is desired.

A perfusable 3D cell-matrix tissue culture chamber for in situ evaluation of nanoparticle vehicle penetration and transport

A key factor in gene or drug therapy is the development of carriers that can efficiently reach targeted cells from a distal administration. In many gene/drug delivery studies, results obtained in 2D cultures fail to translate to similar results in vivo. In this work, we developed a perfusable 3D chamber for studying nanoparticle penetration and transport in cell-gel soft tissue cultures. The compartmented chamber is made of a polydimethylsiloxane (PDMS) top layer with the chamber features, created using micromachined lithography, bonded to a bottom glass coverslip. A solution of cells embedded in a hydrogel is loaded in the chamber between PDMS posts that serve as anchors to the cell-matrix at the gel-media interface. The chamber offers the following unique features: (i) rapid fabrication and simplicity in assembly, (ii) direct in situ cell imaging in a plane normal to the direction of flow or action, (iii) an easily configurable and controllable environment conducive cell culture under static or interstitial flow conditions, and (iv) facile recovery of live cells from chambers for post-experimental analysis. To assess the chamber, we delivered fluorescently labeled nanoparticles of three distinct sizes to cells-embedded Matrigels in the 3D chamber under flow and static conditions. Penetration of nanoparticles were enhanced under interstitial flow while live cell imaging and flow cytometry of recovered cells revealed particle size restrictions to efficient delivery. Although designed for delivery studies, the chamber is versatile and can be easily modified. Thus it may have broad applications for biological, tissue engineering, and therapeutic studies.

Muscle-derived stem cells for tissue engineering and regenerative therapy

Skeletal muscle has been recognized as an essential source of progenitor or satellite cells, which are primarily responsible for muscle regeneration. Recently, muscle has also been identified as a valuable source of postnatal stem cells that appear to be distinct from satellite cells and possess the ability to differentiate into other cell lineages. These cells, named muscle-derived stem cells, possess a high myogenic capacity and effectively regenerate both skeletal and cardiac muscle. Remarkably, when genetically modified ex vivo to express growth factors, these cells can differentiate into osteogenic and chondrogenic lineages and have been shown to promote the repair of bone and cartilage. Muscle stem cell-based regenerative therapy and tissue engineering using ex vivo gene therapy, are promising approaches for the treatment of various musculoskeletal, cardiovascular, and urological disorders.

Partitioning microfluidic channels with hydrogel to construct tunable 3-D cellular microenvironments

Accurate modeling of the cellular microenvironment is important for improving studies of cell biology in vitro. Here, we demonstrate a flexible method for creating a cellular microenvironment in vitro that allows (i) controlled spatial distribution (patterning) of multiple types of cells within three-dimensional (3-D) matrices of a biologically derived, thermally curable hydrogel (Matrigel) and (ii) application of gradients of soluble factors, such as cytokines, across the hydrogel. The technique uses laminar flow to divide a microchannel into multiple subchannels separated by microslabs of hydrogel. It does not require the use of UV light or photoinitiators and is compatible with cell culture in the hydrogel. This technique makes it possible to design model systems to study cellular communication mediated by the diffusion of soluble factors within 3-D matrices. Such factors can originate either from secretions of neighboring cells patterned within the microchannel, or from an external source -- e.g., a solution of growth factors injected into a subchannel. This method is particularly useful for studying cells such as those of the immune system, which are often weakly adherent and difficult to position precisely with standard systems for cell culture. We demonstrated this application by co-culturing two types of macrophage-like cells (BAC1.2F5 and LADMAC cell lines) within spatially separated regions of a slab of hydrogel. This pair of cell lines represents a simple model system for intercellular communication: the LADMAC cells produce colony-stimulating factor 1 (CSF-1), which is required by the BAC cells for survival.

Cell culture models in microfluidic systems

Microfluidic technology holds great promise for the creation of advanced cell culture models. In this review, we discuss the characterization of cell culture in microfluidic systems, describe important biochemical and physical features of the cell microenvironment, and review studies of microfluidic cell manipulation in the context of these features. Finally, we consider the integration of analytical elements, ways to achieve high throughput, and the design constraints imposed by cell biology applications.

Self-assembling Fmoc dipeptide hydrogel for in situ 3D cell culturing

Background

Conventional cell culture studies have been performed on 2D surfaces, resulting in flat, extended cell growth. More relevant studies are desired to better mimic 3D in vivo tissue growth. Such realistic environments should be the aim of any cell growth study, requiring new methods for culturing cells in vitro. Cell biology is also tending toward miniaturization for increased efficiency and specificity. This paper discusses the application of a self-assembling peptide-derived hydrogel for use as a 3D cell culture scaffold at the microscale.

Results

Phenylalanine derivative hydrogel formation was seen to occur in multiple dispersion media. Cells were immobilized in situ within microchambers designed for cell analysis. Use of the highly biocompatible hydrogel components and simplistic procedures significantly reduced the cytotoxic effects seen with alternate 3D culture materials and microstructure loading methods. Cells were easily immobilized, sustained and removed from microchambers. Differences in growth morphology were seen in the cultured cells, owing to the 3-dimentional character of the gel structure. Degradation improved the removal of hydrogel from the microstructures, permitting reuse of the analysis platforms.

Conclusion

Self-assembling diphenylalanine derivative hydrogel provided a method to dramatically reduce the typical difficulties of microculture formation. Effective generation of patterned 3D cultures will lead to improved cell study results by better modeling in vivo growth environments and increasing efficiency and specificity of cell studies. Use of simplified growth scaffolds such as peptide-derived hydrogel should be seen as highly advantageous and will likely become more commonplace in cell culture methodology.

Three-dimensional polymeric systems for cancer cell studies

Three-dimensional (3-D) culture of cancer cells and of normal mammalian cells in a polymeric matrix is generally a better alternate model for understanding the regulation of cancer cell proliferation and for evaluation of different anticancer drugs. A substantial amount of evidence demonstrates important differences in the behavior of cells grown in monolayer, i.e., two-dimensional (2-D), and in 3-D cultures. Cancer cells grown in 3-D culture are more resistant to cytotoxic agents than cells in 2-D culture; growth of cells in vitro in 3-D requires a suitable polymer that provides a structural scaffold for cell adhesion and growth. Many naturally derived polymers as well as synthetic polymers have been investigated as scaffolds. The aim of this review is to overview the polymeric materials of natural and synthetic origin that are of specific interest to 3-D cell cultures, and discuss the development of new polymers that should be specifically designed for 3-D culture applications.

A practical guide to microfluidic perfusion culture of adherent mammalian cells

Culturing cells at microscales allows control over microenvironmental cues, such as cell-cell and cell-matrix interactions; the potential to scale experiments; the use of small culture volumes; and the ability to integrate with microsystem technologies for on-chip experimentation. Microfluidic perfusion culture in particular allows controlled delivery and removal of soluble biochemical molecules in the extracellular microenvironment, and controlled application of mechanical forces exerted via fluid flow. There are many challenges to designing and operating a robust microfluidic perfusion culture system for routine culture of adherent mammalian cells. The current literature on microfluidic perfusion culture treats microfluidic design, device fabrication, cell culture, and micro-assays independently. Here we systematically present and discuss important design considerations in the context of the entire microfluidic perfusion culture system. These design considerations include the choice of materials, culture configurations, microfluidic network fabrication and micro-assays. We also present technical issues such as sterilization; seeding cells in both 2D and 3D configurations; and operating the system under optimized mass transport and shear stress conditions, free of air-bubbles. The integrative and systematic treatment of the microfluidic system design and fabrication, cell culture, and micro-assays provides novices with an effective starting point to build and operate a robust microfludic perfusion culture system for various applications.