Recent advances in the analysis of antibiotics by CE and CEC

Low-cost and versatile analytical tool with purpose-made capillary electrophoresis coupled to contactless conductivity detection: Application to antibiotics quality control in Vietnam

In this study, the development of our purpose-made capacitively coupled contactless conductivity detection (C⁴ D) for CE is reported. These systems have been employed as a simple, versatile, and cost-effective analytical tool. CE-C⁴ D devices, whose principle is based on the control of the ion movements under an electrical field, can be constructed even with a modest financial budget and limited infrastructure. A featured application was developed for quality control of antimicrobial drugs using CE-C⁴ D, with most recent work on determination of aminoglycoside and glycopeptide antibiotics being communicated. For aminoglycosides, the development of CE-C⁴ D methods was adapted to two categories. The first one includes drugs (liquid or powder form) for intravenous injection, containing either amikacin, streptomycin, kanamycin A, or kanamycin B. The second one covers drugs for eye drops (liquid or ointment form), containing either neomycin, tobramycin, or polymyxin. The CE-C⁴ D method development was also made for determination of some popular glycopeptide antibiotics in Vietnam, including vancomycin and teicoplanin. The best detection limit achieved using the developed CE-C⁴ D methods was 0.5 mg/L. Good agreement between results from CE-C⁴ D and the confirmation method (HPLC- Photometric Diode Array ) was achieved, with their result deviations less than 8% and 13% for aminoglycoside and glycopeptide antibiotics, respectively.

Rapid determination of aminoglycosides in pharmaceutical preparations by electrospray ionization mass spectrometry

Aminoglycosides are broad-spectrum antibiotics often employed to combat Gram-negative bacterial infections. A technique based on electrospray-ionization mass spectrometry (ESI-MS) was developed for rapid determination of aminoglycosides. This method, which does not require prior chromatographic separation, or derivatization and extensive sample preparation steps, was deployed to estimate gentamicin, tobramycin, and amikacin in pharmaceutical formulations. Upon gas-phase collisional activation, protonated gentamicin, tobramycin, and amikacin undergo a facile loss of their respective “C” ring moiety to produce characteristic ions of m/z 322, 324, and 425, respectively. The mass spectral peak intensities for these specific product ions were monitored either by a flow-injection analysis selected-ion monitoring (FIA-SIM) time-intensity method or by a mass spectrometric internal-standard method. The linear dynamic ranges of detection for both methods were evaluated to be 10–1000 ng/mL for gentamicin, 25–2500 ng/mL for tobramycin, and 10–1000 ng/mL for amikacin. The internal-standard mass spectrometric method afforded lower intra-day and inter-day variations (2.3–3.0% RSD) compared to those from FIA-SIM method (4.5–5.0% RSD). This method was applied as a potential alternative procedure to determine gentamicin in commercial pharmaceutical samples and to monitor the release of gentamicin from “self-defensive” tannic acid-based layer-by-layer films into phosphate buffer solutions at different pHs.

A dichromatic label-free aptasensor for sulfadimethoxine detection in fish and water based on AuNPs color and fluorescent dyeing of double-stranded DNA with SYBR Green I

A dichromatic label-free aptasensor was described for sulfadimethoxine (SDM) detection. Compared with the binding of SDM-aptamer to SDM, the higher affinity of aptamer to cDNA may result in the hybridization of dsDNA. In the presence of SDM, the aptamer specifically binds to SDM, leading to a blue color of AuNPs in deposit and fluorescence at 530 nm in supernatant after adding cDNA and SGI. With no target of SDM, AuNPs protected with the aptamer re-disperse in PBS with a red color, and no fluorescence occurs in supernatant. Based on the principle, SDM can be quantitatively detected through both fluorescent emission and AuNPs color changes with recoveries ranging from 99.2% to 102.0% for fish and from 99.5% to 100.5% for water samples. An analytical linear range of 2-300 ng mL^-1 was achieved with the detection limits of 3.41 ng mL^-1 for water and 4.41 ng g^-1 for fish samples (3σ, n = 9).

Analysis of antibiotics by CE and their use as chiral selectors: An update

The widespread use of antibiotics in medicine and as growth-promoting agents has increased the demand for suitable analytical techniques for their analysis. Analytical methods based on CE or miniaturized CE systems have proved over the years their ability for the analysis of antibiotics. Since our last review (Electrophoresis 2014, 35, 28-49) several new CE methodologies have been reported for antibiotic analysis. This review presents an update of the literature published from June 2013 to June 2015 for the analysis of antibiotics by CE. UV continues being the most used detection system for antibiotics analysis by CE. Strategies to improve sensitivity as the use of sensitive detection systems and the application of preconcentration techniques appear to be the major developments. Furthermore, the use of portable and miniaturized devices for antibiotic analysis is presented in detail. Applications of the developed methodologies to the determination of residues of antibiotics in biological, food, and environmental samples are carefully described. Finally, new developments and applications of antibiotics as chiral selectors in CE are also included.

Recent advances in CE analysis of antibiotics and its use as chiral selectors

Antibiotics are a class of therapeutic molecules widely employed in both human and veterinary medicine. This article reviews the most recent advances in the analysis of antibiotics by CE in pharmaceutical, environmental, food, and biomedical fields. Emphasis is placed on the strategies to increase sensitivity as diverse off-line, in-line, and on-line preconcentration approaches and the use of different detection systems. The use of CE in the microchip format for the analysis of antibiotics is also reviewed in this article. Moreover, since the use of antibiotics as chiral selectors in CE has grown in the last years, a new section devoted to this aspect has been included. This review constitutes an update of previous published reviews and covers the literature published from June 2011 until June 2013.

CEC of phytochemical bioactive compounds

Although there are many publications related to technological or methodological developments of CEC, few focus on the analysis of natural products, especially phytochemical bioactive compounds. This review summarized the application of CEC in the analysis of phytochemical bioactive components, including flavonoids, nucleosides, steroids, lignans, quinones and coumarins, as well as fingerprint analysis of herbs. The strategies for optimization of CEC conditions and detection were also discussed.

Recent advances in the application of capillary electromigration methods for food analysis and Foodomics

The use of capillary electromigration methods to analyze foods and food components is reviewed in this work. Papers that were published during the period April 2007 to March 2009 are included following the previous review by García-Cañas and Cifuentes (Electrophoresis, 2008, 29, 294-309). These works include the analysis of amino acids, biogenic amines, peptides, proteins, DNAs, carbohydrates, phenols, polyphenols, pigments, toxins, pesticides, vitamins, additives, small organic and inorganic ions and other compounds found in foods and beverages, as well as those applications of CE for monitoring food interactions and food processing. The use of microchips, CE-MS, chiral-CE as well as other foreseen trends in food analysis are also discussed including their possibilities in the very new field of Foodomics.