Recent progress of chiral monolithic stationary phases in CEC and capillary LC

Poly(carboxyethyl acrylate-co-ethylene glycol dimethacrylate) precursor monolith with bonded (S)-(-)-1-(2-naphthyl) ethylamine ligands for use in chiral and achiral separations by capillary electrochromatography

In this research report, the previously developed poly(carboxyethyl acrylate-co-ethylene glycol dimethacrylate) precursor monolith (referred to as carboxy monolith) is further exploited in the preparation of a chiral stationary phase for enantiomeric separations. The carboxy monolith precursor was subjected to post polymerization functionalization (PPF) with the chiral selector (S)-(-)-1-(2-naphthyl) ethylamine (NAS) at room temperature in the presence of N, N´-dicyclohexylcarbodiimide (DCC) in chloroform. The DCC, which is an organic soluble carbodiimide, permits the linkage for the amine functionality of the chiral ligand NAS to the carboxy group of the monolithic surface forming a stable amide linkage. The NAS column thus obtained allowed not only enantiomeric separations in the RP mode via its chiral site but also the separation of nonpolar species via its achiral functionality offering both hydrophobic and π-π interactions for aromatic compounds such toluene derivatives and polyaromatic hydrocarbons. The dual interaction sites (e.g., chiral, and achiral) of the NAS present a convenient column for the separations of slightly polar and nonpolar chiral and achiral solutes in the RP mode.

Effect of the Molecularly Imprinted Polymer Component Ratio on Analytical Performance

Molecular imprinting technology is a new analytical method that is highly selective and specific for certain analytes in artificial receptor design. The renewal possibilities of this technology make it an ideal material for sundry application fields. Molecularly imprinted polymers (MIPs) are polymeric matrices that have molecules printed on their surfaces; these surfaces can chemically interact with molecules or follow the pattern of the available template cavities obtained using imprinting technology. A MIP is useful for separating and analysing complex samples, such as biological fluids and environmental samples, because it is a strong analytical recognition element that can mimick natural recognition entities like biological receptors and antibodies. The MIP components consist of the target template, functional monomer, crosslinker, polymerisation initiator, and porogen. The effectiveness and selectivity of a MIP are greatly influenced by variations in the components. This review will provide an overview of the effect of MIP component ratio on analytical performance to each target analyte; it will also provide a strategy to obtain the best MIP performance. For every MIP, each template : monomer : crosslinker ratio shows a distinct performance for a specific analyte. The effects of the template : monomer : crosslinker ratio on a MIP's analytical performances-measured by the imprinting factor, sorbent binding capacity, and sorbent selectivity-are briefly outlined.

Synthesis of a poly(sulfobetaine-co-polyhedral oligomeric silsesquioxane) hybrid monolith via an in-situ ring opening quaternization for use in hydrophilic interaction capillary liquid chromatography

An in-situ approach is described for synthesis of poly(sulfobetaine-co-polyhedral oligomeric silsesquioxane) [poly(sulfobetaine-co-POSS)] that can be used in a hybrid monolithic column as a hydrophilic liquid chromatography (HILIC) stationary phase. Synthesis involves (a) radical polymerization of octa(propyl methacrylate)-polyhedral oligomeric silsesquioxane (MA-POSS) and organic monomers such as dimethylaminopropyl methacrylate or vinyl imidazole, and (b) in-situ ring-opening quaternization between 1,4-butane sultone and the organic monomers. The sulfobetaine groups are generated in-situ monolith. This obviates the need for synthesis of sulfobetaine monomer previously. The pore size and permeability of the material can be tuned by using a binary porogenic system (polyethyleneglycol 600 and acetonitrile) and via the composition of the polymerization mixture. The optimized hybrid monolith owns its merits to the presence of POSS and sulfobetaine groups with good mechanical stability, the lack of residual silanol groups, and adequate hydrophilicity. The column filled with the monoliths was evaluated as a stationary phase for HILIC. Several kinds of polar compounds (including nucleosides, bases, phenols, aromatic acids and amides) were separated by using mobile phases with high organic solvent fractions in capillary liquid chromatography. Graphical abstractAn in-situ approach is described for synthesis of poly(sulfobetaine-co-polyhedral oligomeric silsesquioxane) hybrid monolithic column for use in hydrophilic liquid chromatography. The optimized monolith owns good mechanical stability, the lack of residual silanol groups and adequate hydrophilicity. Baseline separation of several kinds of polar compounds is achieved on the column. MA-POSS: octa(propyl-methacrylate) polyhedral oligomeric silsesquioxane; DMAEMA: dimethylaminoethyl methacrylate; AIBN: azodiisobutyronitrile. Poly(DMABS-co-POSS): poly(N-(4-sulfobutyl)-N-methacryloxypropyl- N,N-dimethylammonium-betaine-co-polyhedral oligomeric silsesquioxane).

Strategies for Molecular Imprinting and the Evolution of MIP Nanoparticles as Plastic Antibodies-Synthesis and Applications

Materials that can mimic the molecular recognition-based functions found in biology are a significant goal for science and technology. Molecular imprinting is a technology that addresses this challenge by providing polymeric materials with antibody-like recognition characteristics. Recently, significant progress has been achieved in solving many of the practical problems traditionally associated with molecularly imprinted polymers (MIPs), such as difficulties with imprinting of proteins, poor compatibility with aqueous environments, template leakage, and the presence of heterogeneous populations of binding sites in the polymers that contribute to high levels of non-specific binding. This success is closely related to the technology-driven shift in MIP research from traditional bulk polymer formats into the nanomaterial domain. The aim of this article is to throw light on recent developments in this field and to present a critical discussion of the current state of molecular imprinting and its potential in real world applications.

Polysaccharide-Based Chiral Stationary Phases for Enantioseparations by High-Performance Liquid Chromatography: An Overview

This chapter summarizes the application of polysaccharide-based chiral stationary phases (CSPs) for separation of enantiomers in high-performance liquid chromatography (HPLC). Since this book contains dedicated chapters on enantioseparations using supercritical fluid chromatography (SFC), or capillary electrochromatography (CEC), the application of polysaccharide-based materials in these modes of liquid-phase separation techniques is touched just superficially. Special emphasis is directed toward a discussion of the optimization of polysaccharide-based chiral selectors, their attachment onto the carrier, and the optimization of the support. The optimization of the separation of enantiomers based on various parameters such as mobile phase composition and temperature is discussed.

Chromatographic Studies of Protein-Based Chiral Separations

The development of separation methods for the analysis and resolution of chiral drugs and solutes has been an area of ongoing interest in pharmaceutical research. The use of proteins as chiral binding agents in high-performance liquid chromatography (HPLC) has been an approach that has received particular attention in such work. This report provides an overview of proteins that have been used as binding agents to create chiral stationary phases (CSPs) and in the use of chromatographic methods to study these materials and protein-based chiral separations. The supports and methods that have been employed to prepare protein-based CSPs will also be discussed and compared. Specific types of CSPs that are considered include those that employ serum transport proteins (e.g., human serum albumin, bovine serum albumin, and alpha1-acid glycoprotein), enzymes (e.g., penicillin G acylase, cellobiohydrolases, and α-chymotrypsin) or other types of proteins (e.g., ovomucoid, antibodies, and avidin or streptavidin). The properties and applications for each type of protein and CSP will also be discussed in terms of their use in chromatography and chiral separations.

Molecular imprinting: perspectives and applications

This critical review presents a survey of recent developments in technologies and strategies for the preparation of MIPs, followed by the application of MIPs in sample pretreatment, chromatographic separation and chemical sensing.

Recent advances on capillary columns, detectors, and two-dimensional separations in capillary electrochromatography

As a typical miniaturized analytical technique, CEC has attracted much attention because of its low sample and solvent consumption, high efficiency, high selectivity, high resolution, and fast speed. In this review, we mainly cover the development of capillary columns and detection techniques in the CEC since 2009. Herein, three types of capillary columns, namely, open-tubular capillary columns, monolithic columns and packed columns, and several types of detectors are reviewed in detail. Moreover, a 2D separation system based on CEC is also reported.

Advance of CE and CEC in phytochemical analysis (2012–2013)

This article presents an overview of the advance of CE and CEC in phytochemical analysis, based on the literature not mentioned in our previous review papers [Chen, X. J., Zhao, J., Wang, Y. T., Huang, L. Q., Li, S. P., Electrophoresis 2012, 33, 168–179], mainly covering the years 2012–2013. In this article, attention is paid to online preconcentration, rapid separation, and sensitive detection. Selected examples illustrate the applicability of CE and CEC in biomedical, pharmaceutical, environmental, and food analysis. Finally, some general conclusions and future perspectives are given.

A versatile polydopamine platform for facile preparation of protein stationary phase for chip-based open tubular capillary electrochromatography enantioseparation

A novel, simple, and economical method for the preparation of chiral stationary phases for chip-based enantioselective open tubular capillary electrochromatography (OT-CEC) using polydopamine (PDA) coating as an adhesive layer was reported for the first time. After the poly(dimethylsiloxane) (PDMS) microfluidic chip was filled with dopamine (DA) solution, PDA film was gradually formed and deposited on the inner wall of microchannel as permanent coating via the oxidation of DA by the oxygen dissolved in the solution. Due to possessing plentiful catechol and amine functional groups, PDA coating can serve as a versatile multifunctional platform for further secondary reactions, leading to tailoring of the coatings for protein bioconjugation by the thiols and amines via Michael addition or Schiff base reactions. Bovine serum albumin (BSA), acting as a target protein, was then stably and homogeneously immobilized in the PDA-coated PDMS microchannel to fabricate a novel protein stationary phase. Compared with the native PDMS microchannels, the modified surfaces exhibited much better wettability, more stable and enhanced electroosmotic mobility, and less nonspecific adsorption. The water contact angle and electroosmotic flow of PDA/BSA-coated PDMS substrate were measured to be 44° and 2.83×10(-4)cm(2)V(-1)s(-1), compared to those of 112° and 2.10×10(-4)cm(2)V(-1)s(-1) from the untreated one, respectively. Under a mild condition, d- and l-tryptophan were efficiently separated with a resolution of 1.68 within 130s utilizing a separation length of 37mm coupled with in-column amperometric detection on the PDA/BSA-coated PDMS microchips. This present versatile platform, facile conjugation of biomolecules onto microchip surfaces via mussel adhesive protein inspired coatings, may offer new processing strategies to prepare a biomimetic surface design on microfluidic chips, which is promising in high-throughput and complex biological analysis.

Enantioseparations by high-performance liquid chromatography using polysaccharide-based chiral stationary phases: an overview

This chapter summarizes the application of polysaccharide-based chiral stationary phases (CSPs) for separation of enantiomers in high-performance liquid chromatography (HPLC). Since this book contains dedicated chapters on enantioseparations using supercritical fluid chromatography (SFC), capillary electrochromatography (CEC), and simulated moving bed (SMB) chromatography, the application of polysaccharide-based materials in these modes of liquid phase separation techniques are touched just superficially. More emphasis is directed toward a discussion of the optimization of polysaccharide-based chiral selectors, their attachment onto the carrier, and the optimization of the support. The optimization of the separation of enantiomers based on various parameters such as mobile phase composition and temperature is also discussed.

Polysaccharide-derived chiral stationary phases in capillary electrochromatography enantioseparations

Capillary electrochromatography (CEC) has been shown to be a promising technique for miniaturized enantioseparations. Here we present the preparation and application of positively charged cellulose derivative-based chiral stationary phases (CSPs) for the CEC separation of enantiomers. The cellulose derivatives were chemically immobilized onto diethylenetriaminopropylated silica gel using tolylene-2,4-diisocyanate as a spacer. The separation of enantiomers in CEC can be performed on the positively charged CSPs with nonaqueous and aqueous mobile phases.

Poly(glycidyl methacrylate-divinylbenzene) based immobilized pH gradient capillary isoelectric focusing coupling with MALDI mass spectrometry for enhanced neuropeptide analysis

Herein, we report an immobilized pH gradient (IPG) capillary isoelectric focusing-matrix-assisted laser desorption/ionization mass spectrometry (CIEF-MALDI MS) platform designed for the separation of complex neuropeptides. This platform features a poly(glycidyl methacrylate-divinylbenzene) (GMA-DVB)-based monolithic column for CIEF separation. Different from regular CIEF, carrier ampholytes are preimmobilized on the monolithic surface instead of being added to the sample. An off-line coupling of IPG-CIEF to MALDI MS has been established. Comparison with regular CIEF and optimizations are performed with bovine serum albumin tryptic peptides and extracted neuropeptide mixtures from crustacean Callinectes sapidus. It has been demonstrated that the separation of complex peptide mixtures in neutral and basic pH ranges can be achieved in less than 10 min with comparable separation efficiency with regular CIEF, while the MS signal is significantly enhanced when employing IPG-CIEF. Enhanced neuropeptide detection is also observed after coupling IPG-CIEF with MALDI MS.

An insight into the mechanism of CEC separation of template analogues on a norepinephrine-imprinted monolith

A monolith molecularly imprinted polymer (MIP) column was prepared from template (-)-norepinephrine, functional monomer (itaconic acid), and a cross-linker (either ethylene glycol dimethacrylate or divinylbenzene) in porogen N,N-dimethylformamide. Understanding the molecular recognition of a template using an MIP seems feasible. However, it is hard to explain the recognition properties of their analogues on an MIP. The separation mechanism was investigated with the addition of charged surfactants, native and derivatised β-cyclodextrin (β-CD), achiral crown ether, etc. to determine the retention behaviour of the template analogues. The addition of organic modifiers and the adjustment of separation conditions were used to manipulate the selectivity. No chiral recognition was observed under most of the test conditions except the experiment with the charged β-CD on the divinylbenzene-MIP column. The different experimental conditions led to differences in the mobilities of the analytes and resulted in remarkable enantiomeric separation of the template. We confirmed the presence of mixed-mode selectivity of the stationary phase based on hydrogen bonding, hydroelectric and hydrophobic interactions, and the electrophoretic mode.