Affinity capillary electrophoresis coupling with partial filling technique and field-amplified sample injection for enantioseparation and determination of DL-tetrahydropalmatine

Enantioselective analysis in complex matrices using capillary electrophoresis-mass spectrometry: A case study of the botanical drug Corydalis Rhizoma

Enantioselective analysis is critically important in the pharmaceutical and agricultural industries. However, most of the methods reported were developed for the analysis of pure racemates acquired from chemical synthesis or purification. Direct analysis of chiral enantiomers in complex matrices has rarely been reported. This work demonstrated capillary electrophoresis-mass spectrometry (CE-MS) for the enantioselective analysis of botanical drugs for the first time, using a widely used botanical drug, Corydalis Rhizoma, as an example. The method was used for the simultaneous enantioselective analysis of dl-tetrahydropalmatine and (RS)-tetrahydroberberine (canadine) in Corydalis Rhizoma extract. Using (2-hydroxypropyl)-β-cyclodextrin as the chiral selector, a partial filling technique was used to avoid signal suppression and contamination of the MS detector. Post column organic modifier was used to assist with ionization in the flow through microvial CE-MS interface, therefore, organic solvents was not used in the background electrolyte. The completely aqueous background electrolyte contributed to better chiral separations. The CE-MS method established here can directly determine the analytes in their complex matrix without any pre-purification steps, while also offering high sensitivity and low operational costs (including sample, chiral selector and solvent). In the method validation process, good linearity (r > 0.993), sensitivity and accuracy (recoveries within 89.1-110.0%) were demonstrated. The CE-MS technique was shown to be able to provide good selectivity for the simultaneous chiral separation of multiple pairs of enantiomers in complex matrices.

Enantiomeric Determination of Drugs in Pharmaceutical Formulations and Biological Samples by Electrokinetic Chromatography

Chirality is a relevant issue in the pharmaceutical field due to the different biological activity that enantiomers of a chiral drug can show. In fact, the desired biological or pharmaceutical activity might be present in only one of the enantiomers, while the other enantiomer(s) may have different biological activity, be inactive or even toxic. This has motivated in recent years the development of drugs marketed as pure enantiomers to avoid exposing the organism to the action of enantiomers that may not be active or even harmful to health. Thus, it is of high interest to develop enantioselective analytical methodologies to control the presence of enantiomeric impurities and to understand the enantioselective metabolism of chiral drugs. This review gives an overview about the analytical strategies developed by electrokinetic chromatography (EKC) from 2010 to June 2019 for the enantiomeric determination of drugs in both pharmaceutical formulations and biological samples. The types of chiral selectors used, the migration order of enantiomers, their resolution, the detection technique employed and the sensitivity achieved are revised and compared. Also, applications to assess the enantiomeric purity control of pharmaceutical formulations and to determine chiral drugs in biological samples to study their metabolism are included. Advantages and limitations of the chiral methods developed by EKC are also discussed.

Enantioselective analysis of melagatran via an LSPR biosensor integrated with a microfluidic chip

The impact of chiral compounds on pharmacological and biological processes is well known. With the increasing need for enantiomerically pure compounds, effective strategies for enantioseparation and chiral discrimination are in great demand. Herein we report a simple but efficient approach for the enantioselective determination of chiral compounds based on a localized surface plasmon resonance (LSPR) biosensor integrated with a microfluidic chip. A glass microfluidic chip with an effective volume of ~0.75 μL was fabricated for this application. Gold nanorods (AuNRs) with an aspect ratio of ~2.6 were self-assembled onto the surface of the inner wall of the chip to serve as LSPR transducers, which would translate the analyte binding events into quantitative concentration information. Human α-thrombin was immobilized onto the AuNR surface for enantioselective sensing of the enantiomers of melagatran. The proposed sensor was found to be highly selective for RS-melagatran, while the binding of its enantiomer, SR-melagatran, to the sensor was inactive. Under optimal conditions, the limit of detection of this sensor for RS-melagatran was found to be 0.9 nM, whereas the presence of 10,000-fold amounts of SR-melagatran did not interfere with the detection. To the best of our knowledge, this is the first demonstration of an LSPR-based enantioselective biosensor.

Recentchiral selectors for separation in HPLC and CE

Enantiomers (stereoisomers) can exhibit substantially different properties if present in chiral environments. Since chirality is a basic property of nature, the different behaviors of the individual enantiomers must be carefully studied and properly treated. Therefore, enantioselective separations are a very important part of separation science. To achieve the separation of enantiomers, an enantioselective environment must be created by the addition of a chiral selector to the separation system. Many chiral selectors have been designed and used in various fields, such as the analyses of drugs, food constituents and agrochemicals. The most popular have become the chiral selectors and/or chiral stationary phases that are of general use, i.e., are applicable in various separation systems and allow for chiral separation of structurally different compounds. This review covers the most important chiral selectors / chiral stationary phases described and applied in high performance liquid chromatography and capillary electrophoresis during the period of the last three years (2008–2011).

Recent approaches in sensitive enantioseparations by CE

The latest strategies and instrumental improvements for enhancing the detection sensitivity in chiral analysis by CE are reviewed in this work. Following the previous reviews by García-Ruiz et al. (Electrophoresis 2006, 27, 195-212) and Sánchez-Hernández et al. (Electrophoresis 2008, 29, 237-251; Electrophoresis 2010, 31, 28-43), this review includes those papers that were published during the period from June 2009 to May 2011. These works describe the use of offline and online sample treatment techniques, online sample preconcentration techniques based on electrophoretic principles, and alternative detection systems to UV-Vis to increase the detection sensitivity. The application of the above-mentioned strategies, either alone or combined, to improve the sensitivity in the enantiomeric analysis of a broad range of samples, such as pharmaceutical, biological, food and environmental samples, enables to decrease the limits of detection up to 10⁻¹² M. The use of microchips to achieve sensitive chiral separations is also discussed.

Recent advances of enantioseparations in capillary electrophoresis and capillary electrochromatography

A comprehensive survey of recent developments and applications of capillary electromigration techniques for enantioseparations from January 2006 to June 2010 is presented. The techniques include capillary electrophoresis, chip capillary electrophoresis and capillary electrochromatography. The separation principles and the chiral recognition mechanisms are discussed. Additionally, on-line preconcentrations in chiral capillary electrophoresis are also reviewed.

Fundamental aspects of chiral electromigration techniques and application in pharmaceutical and biomedical analysis

Capillary electromigration techniques are often considered ideal methods for the analysis of chiral compounds due to the high resolution power and flexibility of the technique. Therefore, especially capillary electrophoresis using a chiral selector in the background electrolyte, also termed electrokinetic chromatography, has found widespread acceptance in analytical enantioseparations of drug compounds in pharmaceuticals and biological media. Moreover, mechanistic studies on analyte complexation by the chiral selectors have continuously been conducted in an effort to rationalize enantioseparation phenomena. These studies combined capillary electrophoresis with spectroscopic techniques such as nuclear magnetic resonance and/or molecular modeling. The present review focuses on recent examples of mechanistic aspects of capillary electromigration enantioseparations and summarizes recent applications of chiral pharmaceutical and biomedical analysis published between January 2009 and August 2010.

Recent developments in protein-ligand affinity mass spectrometry

This review provides an overview of direct and indirect technologies to screen protein–ligand interactions with mass spectrometry. These technologies have as a key feature the selection or affinity purification of ligands in mixtures prior to detection. Specific fields of interest for these technologies are metabolic profiling of bioactive metabolites, natural extract screening, and the screening of libraries for bioactives, such as parallel synthesis libraries and small combichem libraries. The review addresses the principles of each of the methods discussed, with a focus on developments in recent years, and the applicability of the methods to lead generation and development in drug discovery.

Figure