Sulfoalkylbetaine-based monolithic column with mixed-mode of hydrophilic interaction and strong anion-exchange stationary phase for capillary electrochromatography

A Hydrophilic Strong Anion-Exchange Hybrid Monolith for Capillary Liquid Chromatography

A hydrophilic strong anion-exchange monolithic hybrid column was prepared by in-capillary coating 5-µm bare silica particles with the copolymers of methacryloxyethyltrimethyl ammonium chloride and pentaerythritol triacrylate in the presence of a porogen consisting of water, methanol, and cyclohexanol. The composition of the porogen and the concentration of the monomers were investigated and selected. The resulting column was characterized. The column had an uniform pore structure and could withstand a back pressure up to 3500 psi. Its permeability was comparable to that of packed columns and the swelling-shrinking behaviour negligible. Its hydrophobicity could be suppressed at acetonitrile concentrations above 40% (v/v) and the minimum theoretical plate height was about 10 µm for BrÑ. The column-to-column relative standard deviations (RSDs) were 2.2% and 3.5% (n = 9) and the batch-to-batch RSDs were 2.4% and 5.5% (n = 3) for k and H values, respectively. The column exhibited a remarkable performanceforthe separation of inorganic anions, organic weak acids, phenols, and nucleotides.

Modulation of electroosmotic flow in capillary electrophoresis by plant polyphenol-inspired gallic acid/polyethyleneimine coatings: Analysis of small molecules

Plant polyphenols can form functional coatings on various materials through self-polymerization. In this paper, a series of modified capillary columns, which possess diversity of charge characteristics for modulating electroosmotic flow (EOF), were prepared by one-step co-deposition of gallic acid (GA), a plant-derived polyphenol monomer, and branched polyethyleneimine (PEI). The physicochemical properties of the prepared columns were characterized by Fourier transform infrared spectroscopy (FT-IR), UV-Vis spectroscopy and scanning electron microscopy (SEM). The magnitude and direction of EOF of GA/PEI co-deposited columns were modulated by changing a series of coating parameters, such as post-incubation of FeCl₃, co-deposition time, and deposited amounts of GA and PEI with different relative molecular mass (PEI-600, PEI-1800, PEI-10000, and PEI-70000). Furthermore, the separation efficiencies of the prepared GA/PEI co-deposited columns were evaluated by separations of small molecules, including organic acids, polar nucleotides, phenols, nucleic acid bases and nucleosides. Results indicated that modulating of EOF plays an important role in enhancing the separation performance and reversing the elution order of the analytes. Finally, the developed method was successfully applied to quantitative analysis of acidic compounds in four real samples. The recoveries were in the range of 73.5%-85.8% for citric acid, benzoic acid, sorbic acid, salicylic acid and ascorbic acid in beverage and fruit samples, 101.6%-104.9% for cinnamic acid, vanillic acid, and ferulic acid in Angelica sinensis sample, while 84.6%-97.8% for guanosine-5'-monophosphate, uridine-5'-monophosphate, cytosine-5'- monophosphate and adenosine-5'-monophosphate in Cordyceps samples. These results indicated that the co-deposition of plant polyphenol-inspired GA/PEI coatings can provide new opportunities for EOF modulation of capillary electrophoresis.

Monolith columns for liquid chromatographic separations of intact proteins: A review of recent advances and applications

In this article we survey 256 references (with an emphasis on the papers published in the past decade) on monolithic columns for intact protein separation. Protein enrichment and purification are included in the broadly defined separation. After a brief introduction, we describe the types of monolithic columns and modes of chromatographic separations employed for protein separations. While the majority of the work is still in the research and development phase, papers have been published toward utilizing monolithic columns for practical applications. We survey these papers as well in this review. Characteristics of selected methods along with their pros and cons will also be discussed.

An innovative monolithic zwitterionic stationary phase for the separation of phenolic acids in coffee bean extracts by capillary electrochromatography

A methacrylate based monolith, containing the innovative zwitterionic monomer (3-allyl-1-imidazol)propane sulfonate, was prepared in 100 μm I.D. silica capillaries by UV initiated photo-polymerization. Composition of the porogen, i.e. a mixture of 1-propanol, 1,4 butanediol and water, was of great importance to obtain a homogeneous monolith with satisfactory permeability and good electrochromatographic performance. Morphology of the stationary phase was studied in Scanning Electron Microscopy and IR experiments, which revealed a good attachment to the capillary wall, flowthrough-pores in the range of 0.5-2 μm, and a continuous monolithic structure. The developed material was well suited for the analysis of six common phenolic acids (salicylic, cinnamic, syringic, rosmarinic, caffeic and chlorogenic acid) by CEC. Their separation was possible in less than 8 min with a mobile phase comprising a 12 mM aqueous ammonium acetate solution with pH 8.5 and acetonitrile, at an applied voltage of - 20 kV. The developed method was validated (R2 ≥ 0.995; LOD ≤ 3.9 μg mL-1, except for salicylic acid; recovery rates from 94 to 104%) and successfully used for the determination of phenolic acids in Coffea arabica samples. All of them contained cinnamic, syringic and caffeic acid, however only in unroasted coffee beans chlorogenic acid (0.06%) was found. The quantitative results were in good agreement to reported literature data.

Preparation of phosphorylcholine-based hydrophilic monolithic column and application for analysis of drug-related impurities with capillary electrochromatography

A hydrophilic monolithic CEC column was prepared by thermal copolymerization of zwitterionic monomer 2-methacryloyloxyethyl phosphorylcholine (MPC), pentaerythritol triacrylate (PETA), either methacrylatoethyl trimethyl ammonium chloride (META) or sodium 2-methylpropene-1-sulfonate (MPS) in a polar binary porogen consisting of methanol and THF. A typical hydrophilic interaction LC retention mechanism was observed for low-molecular weight polar compounds including amides, nucleotides, and nucleosides in the separation mode of hydrophilic interaction CEC, when high content of ACN (>60%) was used as the mobile phase. The effect of the electrostatic interaction between the analytes and the stationary phase was found to be negligible. The poly(MPC-co-PETA-co-META or MPS) monolithic columns have an average column efficiency of 40 000 plates/m and displayed with a satisfactory repeatability in terms of migration time and peak areas. Finally, the column was successfully applied to determine the impurities of a positively charged drug pramipexole which are often separated by ion pair RP chromatography due to their high hydrophilicity. All four components can be baseline separated within 5 min with BGE consisting of ACN/20 mM ammonium formate buffer (pH 3.0; 80/20).

Improved sulfoalkylbetaine-based organic-silica hybrid monolith for high efficient hydrophilic interaction liquid chromatography of polar compounds

A novel sulfoalkylbetaine-based zwitterionic organic-silica hybrid monolith was synthesized by using 3-dimethyl-(3-(N-methacrylamido) propyl) ammonium propane sulfonate (DMMPPS, neutral sulfoalkyl-betaine monomer). The added amount of zwitterionic monomer was significantly increased when DMMPPS was used instead of the conventionally used acidic sulfoalkyl-betaine monomer, that is, the N,N-dimethyl-N-methacryloxyethyl-N-(3-sulfopropyl) ammonium betaine, and this led to a significantly improved hydrophilicity of the monolith. The DMMPPS-based organic-silica hybridmonolith exhibited good mechanical stability and excellent separation performance. About ∼20 mμ plate height (corresponding to column efficiency of ∼50,000 plates/m) was obtained for nucleoside at the linear velocity of 1 mm/s. The proposed monolithic column was successfully applied to separate purines/pyrimidines, nucleotides, and tryptic digest of bovine hemoglobin in a nano-HILIC mode, and the results demonstrated that such monolith has the potential for separation of a variety of hydrophilic substances.

A novel C18 reversed phase organic–silica hybrid cationic monolithic capillary column with an ionic liquid as an organic monomer via a “one-pot” approach for capillary electrochromatography

A novel IL hybrid monolithic column with great potential in separation has been fabricated via a “one-pot” approach for capillary electrochromatography

Dipyridyl-immobilized ionic liquid type hybrid silica monolith for hydrophilic interaction electrochromatography

A pyridinium-based immobilized ionic liquid type multifunctional hybrid silica monolith was prepared by the in situ polymerization of 3-chloropropyl-silica matrix and 4,4'-dipyridyl for hydrophilic interaction CEC. The obtained hybrid monolith possessed of high stable skeletal microstructures with obviously hydrophilic retention mechanism under ACN content >50% in the mobile phase. Strong and stable anodic EOF could be observed under a broad pH range from pH 3.0 to 9.0. Due to the immobilized dipyridyl groups bonded to the silica matrix surface, the resulting hydrophilic hybrid monolith possessed multiple separation interactions including hydrogen bond, π-π, and anion exchange. Excellent separations of various polar analytes including electroneutral phenols, charged acid nucleotides, and basic analytes were successfully achieved. The highest column efficiencies up to 120,000, 164,000, and 106,000 plates/m were obtained for nucleotides, nucleic acid bases, and nucleosides and nicotines, respectively. These results demonstrated that the dipyridyl-immobilized ionic liquid functionalized hybrid monolith possessed highly mechanical stability and good chromatographic performance for hydrophilic interaction electrochromatography.

A novel positively charged achiral co-monomer for β-cyclodextrin monolithic stationary phase: improved chiral separation of acidic compounds using capillary electrochromatography coupled to mass spectrometry

The work presented here demonstrates the incorporation of vinylbenzyl trimethylammonium (VBTA) as a novel positively charged achiral co-monomer to a glycidyl methacrylate-beta cyclodextrin (GMA/β-CD) based monolith, providing anion exchange sites with reversed electroosmotic flow (EOF) for capillary electrochromatography (CEC). The monolithic phases, GMA/β-CD-VBTA and GMA/β-CD (without co-monomer) were characterized by scanning electron microscopy, optical microscopy, pressure drop/flow-rate curves and nitrogen adsorption analysis. After optimizing the stationary phase and mobile phase parameters, chiral separations of 41 pairs of structurally diverse anionic chiral analytes were compared individually using the GMA/β-CD-VBTA and GMA/β-CD monolithic columns. The GMA/β-CD-VBTA monolith chiral stationary phase separated significantly more acidic compounds compared to the GMA/β-CD column. To-date there has been limited work in the development of chiral monolithic column for CEC-mass spectrometry (MS). Because of good electrodriven flow characteristics, which allow the column to maintain a stable current in the absence of outlet vial, GMA/β-CD-VBTA column was successfully coupled to single quadrupole mass spectrometer for CEC-MS of several chiral test compounds. In addition, the same monolithic CEC column when coupled to a triple quadrupole MS instrument, two orders of magnitude higher sensitivity was observed compared to a single quadrupole MS instrument.

Preparation and characterization of hybrid-silica monolithic column with mixed-mode of hydrophilic and strong anion-exchange interactions for pressurized capillary electrochromatography

A novel organic-silica hybrid monolithic stationary phase with a mixed-mode of hydrophilic and strong anion-exchange interactions (HI-SAX) was prepared with a modified "one-pot" process of functional monomers and alkoxysilanes. Using a hydrosoluble initiator 2,2'-azobis(2-methylpropionamidine) dihydrochloride (AIBA), the homogeneous prepolymerization system of this hybrid monolith was successfully obtained by a simple operation. The polycondensation of alkoxysilanes (tetramethoxysilane (TMOS) and vinyl-trimethoxysilane (VTMS)) and the in situ copolymerization of a quaternary ammonium group-containing acrylic monomer ([2-(acryloyloxy)ethyl] trimethyl ammonium methyl sulfate (AETA)) on the precondensed siloxanes were achieved. The morphologies of the hybrid-silica monolithic matrixes were observed by SEM, and the performances of the organic-silica hybrid monolithic columns were investigated by pressurized capillary electrochromatography. The mechanical stability and reproducibility of the obtained hybrid monolithic column preformed acceptable. Both hydrophilic interaction chromatography mechanism and strong anion-exchanged interaction were investigated. A mixed mode of HI-SAX was obtained for the analysis of nucleotides with a good resolution, and the separation of polar and basic nucleic acid bases and nucleosides was also achieved without peak tailing.

Organic monoliths for hydrophilic interaction electrochromatography/chromatography and immunoaffinity chromatography

This article is aimed at providing a review of the progress made over the past decade in the preparation of polar monoliths for hydrophilic interaction LC (HILIC)/capillary electrochromatography (HI-CEC) and in the design of immuno-monoliths for immunoaffinity chromatography that are based on some of the polar monolith precursors used in HILIC/HI-CEC. In addition, this review article discusses some of the applications of polar monoliths by HILIC and HI-CEC, and the applications of immuno-monoliths. This article is by no means an exhaustive review of the literature; it is rather a survey of the recent progress made in the field with 83 references published in the past decade on the topics of HILIC and immunoaffinity chromatography monoliths.