Recent advances in enrichment techniques for trace analysis in capillary electrophoresis

Magnetic nanoparticles immobilized thrombin ligand fishing to screen thrombin inhibitors in natural products

In this study, thrombin was immobilized with magnetic particles modified by glutaraldehyde. The changes in secondary structures of immobilized enzyme revealed an increment in conformational rigidity and stability, which can be reflected in temperature and pH stability as well as the tolerance of organic reagents. The optimal reutilization times of magnetic particle immobilized thrombin were 7 times, and the half-life of enzyme activity preserved at room temperature was 5 days, which was 2.5 times higher than that of free enzyme. Ligusticum chuanxiong and Anemarrhenae Rhizoma with high enzyme inhibitory activity were selected for primary screening, and six potential inhibitors of thrombin were identified by HPLC/MS. The results showed that three compounds in Anemarrhenae Rhizoma had better predictive thrombin inhibitory activity. Through the in vitro thrombin activity inhibition experiment, it was also verified that mangiferin and neo-mangiferin had an ideal thrombin activity inhibition effect, which was consistent with the results of molecular docking.

Cyclic Multiple Primer Generation Rolling Circle Amplification Assisted Capillary Electrophoresis for Simultaneous and Ultrasensitive Detection of Multiple Pathogenic Bacteria

Efficient, accurate, and economical detection of pathogenic bacteria is crucial in ensuring food safety and preventing foodborne illnesses. How to fulfill the highly sensitive and simultaneous detection of multiple trace pathogenic bacteria is a big challenge. In this work, capillary electrophoresis coupled with a cyclic multiple primer generation rolling circle amplification (cyclic MPG-RCA) was studied for highly sensitive and simultaneous detection of three kinds of pathogenic bacteria. The cyclic MPG-RCA was based on a carefully designed clover-shaped DNA probe, in which three "leaves" corresponded to three types of aimed pathogenic bacteria: Shigella dysenteriae (S. dysenteriae), Salmonella enterica subsp. enterica serovar Typhi (S. Typhi), and Vibrio parahaemolyticus (V. parahaemolyticus). Under the optimal experimental conditions, the limits of detection (S/N = 3) of this method for bacterial target DNA were 11.4 amol·L-1 (S. dysenteriae), 4.88 amol·L-1 (S. Typhi), and 14.9 amol·L-1 (V. parahaemolyticus), and the conversion concentrations for the target bacteria were 10 colony-forming units (CFU)·mL-1 (S. dysenteriae), 3 CFU·mL-1 (S. Typhi), and 12 CFU·mL-1 (V. parahaemolyticus). This method had been applied to the detection of tap water samples with good results, which proved that it could be used as an effective tool for trace pathogenic bacteria monitoring in foods, environments, and medicines.

HSPiP, Computational Modeling, and QbD-Assisted Optimized Method Validation of 5-Fluorouracil for Transdermal Products

This study addressed the simplest and most efficient HPLC (high-performance liquid chromatography) method for the estimation of 5-fluorouracil (5-FU) from rat blood plasma by implementing the Hansen solubility parameters (HSP), computation prediction program, and QbD (quality by design) tool. The mobile phase selection was based on the HSP predictions and experimental data. The Taguchi model identified seven variables (preoptimization) to screen two factors (mobile phase ratio as A and column temperature as B) at three levels as input parameters in "CCD (central composite design)" optimization (retention time as Y1 and peak area as Y2). The stability study (freeze-thaw cycle and short- and long-term stability) was conducted in the rat plasma. Results showed that HSPiP-based HSP values and computational model-based predictions were well simulated with the experimental solubility data. Acetonitrile (ACN) was relatively suitable over methanol as evidenced by the experimental solubility value, HSP predicted parameters (δh of 5-FU - δh of ACN = 8.3-8.3 = 0 as high interactive solvent whereas δh of 5-FU - δh of methanol = 8.3-21.7 = -13.4), and instrumental conditions. CCD-based dependent variables (Y1 and Y2) exhibited the best fit of the model as evidenced by a high value of combined desirability (0.978). The most robust method was adopted at A = 96:4 and B = 40 °C to get earlier Y1 and high Y2 as evidenced by high desirability (D) = 0.978 (quadratic model with p < 0.0023). The estimated values of LLOD and LLOQ were found to be 0.11 and 0.36 μg/mL, respectively with an accuracy range of 94.4-98.7%. Thus, the adopted method was the most robust, reliable, and reproducible methodology for pharmacokinetic parameters after the transdermal application of formulations in the rat.

Immunotechniques for the Group Determination of Macrolide Antibiotics Traces in the Environment Using a Volume-Mediated Sensitivity Enhancement Strategy

Macrolide antibiotics, which are effective antimicrobial agents, are intensively used in human and veterinary medicine, as well as in agriculture. Consequently, they are found all over the world as environmental pollutants, causing harm to sensitive ecological communities and provoking a selection of resistant forms. A novel azithromycin derivative, which was used as hapten conjugate, ensured the group immunorecognition of six major macrolide representatives (105-41%), namely erythromycin, erythromycin ethylsuccinate, clarithromycin, roxithromycin, azithromycin, and dirithromycin in a competitive immunoassay based on anti-clarithromycin antibodies. The heterologous hapten-based ELISA format resulted in a 5-fold increase in sensitivity, with an IC50 value of 0.04 ng/mL for erythromycin. In this study, we proposed an underexploited strategy in an immunoassay field to significantly improve the detectability of analytes in environmental samples. Unlike most approaches, it does not require special enhancers/amplifiers or additional concentration/extraction procedures; instead, it involves analyzing a larger volume of test samples. A gradual volume increase in the samples (from 0.025 to 10 mL) analyzed using a direct competitive ELISA, immunobeads, and immunofiltration assay formats based on the same reagents resulted in a significant improvement (more than 50-fold) in assay sensitivity and detection limit up to 5 and 1 pg/mL, respectively. The suitability of the test for detecting the macrolide contamination of natural water was confirmed by the recovery of macrolides from spiked blank samples (71.7-141.3%). During 2022-2023, a series of natural water samples from Lake Onega and its influents near Petrozavodsk were analyzed, using both the developed immunoassay and HPLC-MS/MS. The results revealed no contamination of macrolide antibiotic.

Detection of Escherichia coli by capillary electrophoresis assisted by large volume sample stacking and nicking endonuclease signal amplification

Efficient, accurate and economical detection of pathogenic bacteria is crucial in ensuring food safety and preventing foodborne illnesses. In this study, a capillary electrophoresis coupled laser-induced fluorescence assay (CE-LIF) was developed for the detection of Escherichia coli (E. coli) by detecting its specific DNA. The CE-LIF was assisted by both online enrichment and offline amplification to improve the detection sensitivity of bacterial DNA. Here the online amplification was performed by large volume sample stacking (LVSS), while the offline amplification was nicking endonuclease signal amplification (NESA). Under the optimal experimental conditions, the detection limit of bacterial target DNA was 2.5 fM, and the conversion concentration of E. coli was 3 CFU · mL-1. The method had been applied to the detection of commercially available skim milk samples with good results, which proved that it could be used as an effective tool for food and environmental bacteria monitoring.

Fast Screening of Protein Tyrosine Phosphatase 1B Inhibitor from Salvia miltiorrhiza Bge by Cell Display-Based Ligand Fishing

Salvia miltiorrhiza Bge is a medicinal plant (Chinese name "Danshen") widely used for the treatment of hyperglycemia in traditional Chinese medicine. Protein tyrosine phosphatase 1B (PTP1B) has been recognized as a potential target for insulin sensitizing for the treatment of diabetes. In this work, PTP1B was displayed at the surface of E. coli cells (EC-PTP1B) to be used as a bait for fishing of the enzyme's inhibitors present in the aqueous extract of S. miltiorrhiza. Salvianolic acid B, a polyphenolic compound, was fished out by EC-PTP1B, which was found to inhibit PTP1B with an IC₅₀ value of 23.35 µM. The inhibitory mechanism of salvianolic acid B was further investigated by enzyme kinetic experiments and molecular docking, indicating salvianolic acid B was a non-competitive inhibitor for PTP1B (with Ki and Kis values of 31.71 µM and 20.08 µM, respectively) and its binding energy was -7.89 kcal/mol. It is interesting that in the comparative work using a traditional ligand fishing bait of PTP1B-immobilized magnetic nanoparticles (MNPs-PTP1B), no ligands were extracted at all. This study not only discovered a new PTP1B inhibitor from S. miltiorrhiza which is significant to understand the chemical basis for the hypoglycemic activity of this plant, but also indicated the effectiveness of cell display-based ligand fishing in screening of active compounds from complex herbal extracts.

Isotachophoresis: Theory and Microfluidic Applications

Isotachophoresis (ITP) is a versatile electrophoretic technique that can be used for sample preconcentration, separation, purification, and mixing, and to control and accelerate chemical reactions. Although the basic technique is nearly a century old and widely used, there is a persistent need for an easily approachable, succinct, and rigorous review of ITP theory and analysis. This is important because the interest and adoption of the technique has grown over the last two decades, especially with its implementation in microfluidics and integration with on-chip chemical and biochemical assays. We here provide a review of ITP theory starting from physicochemical first-principles, including conservation of species, conservation of current, approximation of charge neutrality, pH equilibrium of weak electrolytes, and so-called regulating functions that govern transport dynamics, with a strong emphasis on steady and unsteady transport. We combine these generally applicable (to all types of ITP) theoretical discussions with applications of ITP in the field of microfluidic systems, particularly on-chip biochemical analyses. Our discussion includes principles that govern the ITP focusing of weak and strong electrolytes; ITP dynamics in peak and plateau modes; a review of simulation tools, experimental tools, and detection methods; applications of ITP for on-chip separations and trace analyte manipulation; and design considerations and challenges for microfluidic ITP systems. We conclude with remarks on possible future research directions. The intent of this review is to help make ITP analysis and design principles more accessible to the scientific and engineering communities and to provide a rigorous basis for the increased adoption of ITP in microfluidics.

Determination of four naphthalenediols in cosmetic samples by sweeping-micellar electrokinetic chromatography and a comparison with HPLC

A sweeping micellar electrokinetic chromatography (sweeping-MEKC) method was developed for the determination of 1,7-naphthalenediol, 2,3-naphthalenediol, 1,5-naphthalenediol and 2,7-naphthalenediol in cosmetics. Several parameters affecting sweeping-MEKC method were studied systematically and the separation conditions were optimized as 20 mM NaH2PO4–110 mM SDS and 40% (v/v) MeOH (pH 2.4), with −22 kV applied voltage and UV detection at 230 nm. The sample matrix is 60 mmol L−1 NaH2PO4 and sample introduction was performed at 3 psi for 6 s. Separation of the four naphthalenediols was completed in less than 17 min. Limit of detection (LOD) and limit of quantitation (LOQ) are 0.0045∼0.0094 μg mL−1 and 0.015∼0.031 μg mL−1. Linear relationship (r 2 > 0.999) is satisfactory at the range of 0.1–10 μg mL−1. The developed method has been successfully applied to the determination of the four naphthalenediols in real cosmetic samples, with recoveries in foundation, sun cream and lotion in the range of 92.3%∼106.8% and relative standard deviation (RSD) less than 4.15%. A HPLC method described in the National Standards of the People’s Republic of China was carried out for the comparison with the proposed method. The results showed that the proposed sweeping-MEKC method has the advantages of fast, low cost with comparative sensitivity.

Direct immersion single-drop microextraction of semi-volatile organic compounds in environmental samples: A review

Single-drop microextraction (SDME) techniques are efficient approaches to pretreatment of aqueous samples. The main advantage of SDME lies in the miniaturization of the solvent extraction process, minimizing the hazards associated with the use of toxic organic solvents. Thus, SDME techniques are cost-effective, and represent less harm to the environment, subscribing to green analytical chemistry principles. In practice, two main approaches can be used to perform SDME - direct immersion (DI)-SDME and headspace (HS)-SDME. Even though the DI-SDME has been shown to be quite effective for extraction and enrichment of various organic compounds, applications of DI-SDME are normally more suitable for moderately polar and non-polar semi-volatile organic compounds (SVOCs) using organic solvents which are immiscible with water. In this review, we present a historical overview and current advances in DI-SDME, including the common analytical tools which are usually coupled with DI-SDME. The review also focuses on applications concerning SVOCs in environmental samples. Currents trends in DI-SDME and possible future direction of the procedure are discussed.

A twin enrichment method based on dispersive liquid-liquid microextraction and field-amplified sample injection for the simultaneous determination of sulfonamides

A twin enrichment method based on offline dispersive liquid-liquid microextraction (DLLME) coupled with online field-amplified sample injection (FASI) was developed for the simultaneous determination of four sulfonamide (SA) antibiotics, including sulfamethazine (SMZ), sulfamerazine (SMR), sulfadizine (SDZ) and sulfacetamide (SFA), in different environmental waters, followed by capillary electrophoresis (CE). Various parameters that affected the separation performance of CE and the enrichment efficiencies of DLLME and FASI were optimized in detail, and excellent CE separation was attained within 6 min. The DLLME-FASI-CE offered high sensitivity enrichment factors of 206, 166, 185 and 150 for SMZ, SMR, SDZ and SFA, respectively. Highly sensitive detection was realized with low limits of detection (LODs), which ranged from 2.0-23.0, 2.2-26.0 and 4.3-63.0 ng mL-1 in tap water, lake water and seawater, respectively, as well as limits of quantification (LOQs) within 6.0-63.0, 7.4-96.0 and 14.0-201.0 ng mL-1, respectively. Satisfactory recoveries in the range of 91-108% were obtained with the three spiked environmental water samples, and the relative standard deviations were from 1.09-7.45%. The simple effective twin enrichment method provided promising perspective for CE determination of SAs in complicated aqueous matrices, with rapidity, sensitivity, and accuracy.

Determination of homocysteine thiolactone in human urine by capillary zone electrophoresis and single drop microextraction

A simple, fast, sensitive and reproducible capillary zone electrophoresis (CZE) method with single drop microextraction (SDME) for determination of homocysteine thiolactone (HTL) in human urine has been developed and validated. The method is characterized by good precision, high accuracy, short analysis time and low consumption of reagents. The procedure consists only of few steps: urine sample centrifugation, dilution with phosphate buffer and methanol, chloroform addition onto the top of donor phase, on-line SDME in CE system, sample separation by CZE and ultraviolet detection of HTL at 240 nm. The background electrolyte was 0.1 M pH 4.75 phosphate buffer. Effective separation was achieved within 6.04 min under the separation voltage of 24 kV (~110 μA). The LOQ and LOD for HTL were 50 and 25 nM urine, respectively. The calibration curve in urine showed linearity in the range of 50-200 nM, with R² 0.9995. The intra- and inter-day precision and recovery were 4.0-14.5% (average 8.7% and 9.3%) and 92.7-115.5% (average 103.6% and 104.8%), respectively. The procedure was successfully applied to analysis of urine samples.

Modern Approaches to Preparation of Body Fluids for Determination of Bioactive Compounds

The current clinical and forensic toxicological analysis of body fluids requires a modern approach to sample preparation characterized by high selectivity and enrichment capability, suitability for micro-samples, simplicity and speed, and the possibility of automation and miniaturization, as well as the use of small amounts of reagents, especially toxic solvents. Most of the abovementioned features may be realized using so-called microextraction techniques which cover liquid-phase techniques (e.g., single-drop microextraction, SDME; dispersive liquid–liquid microextraction, DLLME; hollow-fiber liquid-phase microextraction, HF-LPME) and solid-phase extraction techniques (solid-phase microextraction, SPME; microextraction in packed syringes, MEPS; disposable pipette tip extraction, DPX; stir bar sorption extraction, SBSE). Some other extraction methodologies like dispersive solid-phase extraction (d-SPE) or magnetic solid-phase extraction (MSPE) can also be easily miniaturized. This review briefly describes and characterizes the abovementioned extraction methods, and then presents their current applications to the preparation of body fluids analyzed for bioactive compounds in combination with appropriate analytical methods, mainly chromatographic and related techniques. The perspectives of the analytical area we are interested in are also indicated.

Field-amplified sample injection combined with capillary electrophoresis for the simultaneous determination of five chlorophenols in water samples

A sensitive method of CZE-ultraviolet (UV) detection based on the on-line preconcentration strategy of field-amplified sample injection (FASI) was developed for the simultaneous determination of five kinds of chlorophenols (CPs) namely 4-chlorophenol (4-CP), 2-chlorophenol (2-CP), 2,4-dichlorophenol (2,4-DCP), 2,4,6-trichlorophenol (2,4,6-TCP), and 2,6-dichlorophenol (2,6-DCP) in water samples. Several parameters affecting CZE and FASI conditions were systematically investigated. Under the optimal conditions, sensitivity enhancement factors for 4-CP, 2-CP, 2,4-DCP, 2,4,6-TCP, and 2,6-DCP were 9, 27, 35, 43, and 43 folds, respectively, compared with the direct CZE, and the baseline separation was achieved within 5 min. Then, the developed FASI-CZE-UV method was applied to tap and lake water samples for the five CPs determination. The LODs (S/N = 3) were 0.0018-0.019 µg/mL and 0.0089-0.029 µg/mL in tap water and lake water, respectively. The values of LOQs in tap water (0.006-0.0074 µg/mL) were much lower than the maximum permissible concentrations of 2,4,6-TCP, 2,4-DCP, and 2-CP in drinking water stipulated by World Health Organization (WHO) namely 0.3, 0.04, and 0.01 µg/mL, respectively, and thereby the method was suitable to detect the CPs according to WHO guidelines. Furthermore, the method attained high recoveries in the range of 83.0-119.0% at three spiking levels of five CPs in the two types of water samples, with relative standard deviations of 0.37-8.58%. The developed method was proved to be a simple, sensitive, highly automated, and efficient alternative to CPs determination in real water samples.

Amplification of lysozyme signal detected in capillary electrophoresis using mixed polymer brushes coating with switchable properties

In this work, a mixed polymer brushes based on poly(2-methyl-2-oxazoline) (PMOXA) and poly(acrylic acid) (PAA) coated capillary with switchable protein adsorption/desorption properties was developed and applied for on-line extraction and preconcentration of lysozyme. The study of electroosmotic flow (EOF) and fluorescence microscope showed that the inner surface charge of PMOXA/PAA mixed brush coated capillary displayed the switchable behavior toward the change of pH value and ionic strength (I), and PMOXA/PAA mixed brushes coated capillary could adsorb high amounts of lysozyme at pH 7 (I = 10^-5 M), and the most of adsorbed lysozyme could then be desorbed at pH 3 (I = 10^-1 M). Subsequently, this coated capillary with switchable lysozyme adsorption/desorption ability was applied for on-line extraction and preconcentration of lysozyme during capillary electrophoresis (CE) performance. Under the process of on-line preconcentration, the detection signal (peak area) of lysozyme obtained in PMOXA/PAA coated capillary was 26 times that obtained in bare capillary under normal CE while the contour chain length of PAA was 1.56 times that of PMOXA. Moreover, the value of low detection limit (LOD) of lysozyme using above coated capillary under on-line preconcentration method reached to 4.5 × 10^-9 mg/mL, and 1 × 10⁵-fold sensitivity enhancement was realized for lysozyme as compared with the bare capillary under normal CE.

A separation voltage polarity switching method for higher sample loading capacity and better separation resolution in transient capillary isotachophoresis separation

A separation voltage polarity switching transient capillary isotachophoresis (PS-tCITP) was developed to overcome a major sample loading volume limitation in transient capillary isotachophoresis (tCITP). The fundamental idea of PS-tCITP is to let sample ions move back and forth in a separation capillary during their initial isotachophoresis focusing stage by switching the polarity of the separation voltage, in order to both increase the sample loading volume and improve the separation efficiency as compared to the conventional tCITP method. The experimental evaluation of the novel PS-tCITP method by using two peptide standards at 2 μM concentration showed that the maximum sample loading volume could be increased from 45% of the total separation capillary volume in tCITP to 70% in PS-tCITP, which resulted in a more than 1.5 fold increase in the peptide peak intensity at a given length/volume of the separation capillary. Due to the consecutive focusing of sample volume from each polarity switching of the separation voltage, the separation time window at a given sample loading volume was also increased significantly in PS-tCITP as compared to tCITP. Experiment comparison between tCITP and PS-tCITP at 45% sample loading volume using the same setup showed that the migration time difference between the two peptide peaks increased from 0.3 min in tCITP to 0.363 min in PS-tCITP with similar peak widths and heights, resulting in roughly a 21% improvement in separation resolution. The performance advantages of PS-tCITP separation over tCITP separation were further verified by using a mixture of six peptide standards.

Recent advances in enhancing the sensitivity of electrophoresis and electrochromatography in capillaries and microchips (2016-2018)

One of the most cited limitations of capillary and microchip electrophoresis is the poor sensitivity. This review continues to update this series of biannual reviews, first published in Electrophoresis in 2007, on developments in the field of online/in-line concentration methods in capillaries and microchips, covering the period July 2016-June 2018. It includes developments in the field of stacking, covering all methods from field-amplified sample stacking and large-volume sample stacking, through to isotachophoresis, dynamic pH junction, and sweeping. Attention is also given to online or in-line extraction methods that have been used for electrophoresis.

Dispersive liquid-liquid microextraction of five chlorophenols in water samples followed by determination using capillary electrophoresis

Dispersive liquid-liquid microextraction (DLLME) coupled with CE was developed for simultaneous determination of five types of chlorophenols (CPs), namely 2-chlorophenol (2-CP), 4-chlorophenol (4-CP), 2,4-dichlorophenol (2,4-DCP), 2,6-dichlorophenol (2,6-DCP), and 2,4,6-trichlorophenol (2,4,6-TCP) in water samples. Several parameters affecting DLLME and CE conditions were systematically investigated. Under the optimized DLLME-CE conditions, the five CPs were separated completely within 7.5 min and good enrichment factors were obtained of 40, 193, 102, 15, and 107 for 4-CP, 2,4,6-TCP, 2,4-DCP, 2-CP, and 2,6-DCP, respectively. Good linearity was attained in the range of 1-200 μg/L for 2,4,6-TCP, 2,4-DCP, 2-300 μg/L for 4-CP and 2-CP, and 1-300 μg/L for 2,6-DCP, with correlation coefficients (r) over 0.99. The LOD (S/N = 3) and the LOQ (S/N = 10) were 0.31-0.75 μg/L and 1.01-2.43 μg/L, respectively. Recoveries ranging from 60.85 to 112.36% were obtained with tap, lake, and river water spiked at three concentration levels and the RSDs (for n = 3) were 1.31-11.38%. With the characteristics of simplicity, cost-saving, and environmental friendliness, the developed DLLME-CE method proved to be potentially applicable for the rapid, sensitive, and simultaneous determination of trace CPs in complicated water samples.

Storage stability of organophosphorus pesticide residues in peanut and soya bean extracted solutions

This study was performed to determine the storage stability of organophosphorus pesticide residues in high oil content commodity matrices, peanut and soya bean. The storage conditions included different types of solvents (ethyl acetate, acetone and hexane) and corresponding extracted matrix solutions, light and temperature. It was found that three pesticides degraded quickly especially in ethyl acetate solvent. They decreased greater than 30% when stored for 3 days at -20°C in ethyl acetate; the results showed that the stability could be improved in the extracted matrix solutions. Light had a slight effect for stability of phorate and fenthion, while it played an important effect for disulfoton with the exception of ethyl acetate as solvent. Even at -20°C, exposure to solvents or extracted matrix solution resulted in 40.67, 96.33 and 35.07% loss of phorate, disulfoton and fenthion. Hence, it could be assumed that these three residues could be more stable at lower temperature, in the dark and in acetone or hexane extracted peanut and soya bean solutions.

Ionic liquid-based headspace in-tube liquid-phase microextraction coupled with capillary electrophoresis for sensitive detection of phenols

An ionic liquid-based headspace in-tube liquid-phase microextraction (IL-HS-ITLPME) in-line coupled with capillary electrophoresis (CE) is proposed. The method is capable of quantifying trace amounts of phenols in environmental water samples. In the newly developed method, simply by placing a capillary injected with IL in the HS above the aqueous sample, volatile phenols were extracted into the IL acceptor phase in the capillary. After extraction, electrophoresis of the phenols in the capillary was carried out. Extraction parameters such as the extraction time, extraction temperature, ionic strength, volume of the sample solution and IL types were systematically investigated. Under the optimized conditions, enrichment factors for four phenols were from 1510 to 1985. The proposed method provided a good linearity, low limits of detection (below 5.0 ng mL-1 ), and good repeatability of the extractions (RSDs below 6.7%, n = 6). This method was then utilized to analyze two real environmental samples of Xiaoxi Lake and tap water, obtaining acceptable recoveries and precisions. Compared with the usual HS-ITLPME for CE, IL-HS-ITLPME-CE is a simple, low-cost, fast and environmentally friendly pre-concentration technique. This article is protected by copyright. All rights reserved.

Speciation analysis of mercury by dispersive solid-phase extraction coupled with capillary electrophoresis

A pretreatment method of dispersive solid-phase extraction (DSPE) along with back-extraction followed by CE-UV detector was developed for the determination of mercury species in water samples. Sulfhydryl-functionalized SiO2 microspheres (SiO2 -SH) were synthesized and used as DSPE adsorbents for selective extraction and enrichment of three organic mercury species namely ethylmercury (EtHg), methylmercury (MeHg), and phenylmercury (PhHg), along with L-cysteine (L-cys) containing hydrochloric acid as back-extraction solvent. Several main extraction parameters were systematically investigated including sample pH, amount of adsorbent, extraction and back-extraction time, volume of eluent, and concentration of hydrochloric acid. Under optimal conditions, good linearity was achieved with correlation coefficients over 0.9990, in the range of 4-200 μg/L for EtHg, and 2-200 μg/L for MeHg and PhHg. The LODs were obtained of 1.07, 0.34, and 0.24 μg/L for EtHg, MeHg, and PhHg, respectively, as well as the LOQs were 3.57, 1.13, and 0.79 μg/L, respectively, with enrichment factors ranging from 109 to 184. Recoveries were attained with tap and lake water samples in a range of 62.3-107.2%, with relative standard deviations of 3.5-10.1%. The results proved that the method of SiO2 -SH based DSPE coupled with CE-UV was a simple, rapid, cost-effective, and eco-friendly alternative for the determination of mercury species in water samples.

Dispersive liquid-liquid microextraction combined with acetonitrile stacking through capillary electrophoresis for the determination of three selective serotonin reuptake inhibitor drugs in body fluids

Dispersive liquid-liquid microextraction was combined with acetonitrile stacking in capillary electrophoresis for the identification of three selective serotonin reuptake inhibitors (citalopram, fluoxetine, and fluvoxamine) in human fluids such as urine and plasma. Parameters that affect the extraction and stacking efficiency, such as the type and volume of the extraction and disperser solvent, extraction time, salt addition for dispersive liquid-liquid microextraction, and sample matrices, pH, and concentration of the separation buffer for stacking, were investigated and optimized. Under optimum conditions, the enrichment factors were in the range of 1195-1441. Limits of detection ranged from 1.4 to 1.7 nM for the target analytes. Calibration graphs displayed satisfied linearity with R² greater than or equal to 0.9978, and relative standard deviations of the peak area analysis were in the range of 2.9-5.0% (n = 3). The recoveries of all tricyclic antidepressant drugs from urine and plasma were in the range of 77-117 and 79-106%, respectively. The findings of this study show that dispersive liquid-liquid microextraction acetonitrile-stacking capillary electrophoresis is a rapid and convenient method for identifying tricyclic antidepressant drugs in urine and plasma.

Ligand Fishing: A Remarkable Strategy for Discovering Bioactive Compounds from Complex Mixture of Natural Products

Identification of active compounds from natural products is a critical and challenging task in drug discovery pipelines. Besides commonly used bio-guided screening approaches, affinity selection strategy coupled with liquid chromatography or mass spectrometry, known as ligand fishing, has been gaining increasing interest from researchers. In this review, we summarized this emerging strategy and categorized those methods as off-line or on-line mode according to their features. The separation principles of ligand fishing were introduced based on distinct analytical techniques, including biochromatography, capillary electrophoresis, ultrafiltration, equilibrium dialysis, microdialysis, and magnetic beads. The applications of ligand fishing approaches in the discovery of lead compounds were reviewed. Most of ligand fishing methods display specificity, high efficiency, and require less sample pretreatment, which makes them especially suitable for screening active compounds from complex mixtures of natural products. We also summarized the applications of ligand fishing in the modernization of Traditional Chinese Medicine (TCM), and propose some perspectives of this remarkable technique.

Separation of high-purity syringol and acetosyringone from rice straw-derived bio-oil by combining the basification-acidification process and column chromatography

Numerous technologies have been used to reclaim valuable chemicals from bio-oil. In this study, a combination of the basification-acidification process and column chromatography was employed for the separation of high-purity syringol and acetosyringone from rice straw-derived bio-oil. The optimal conditions for the basification-acidification process and the possible precipitation mechanism of the basification were explored. The results showed the following as the optimal conditions for the basification process: mass ratio of calcium hydroxide (Ca(OH)₂ ) to bio-oil, 2.0; reaction temperature, 70°C; and reaction time, 30 min. The results also showed that 1.6 mol of hydrochloric acid (HCl) per gram of bio-oil was optimal for the acidification. The precipitation was found to proceed via a possible mechanism involving the reaction of the phenolic compounds in the bio-oil with Ca(OH)₂ to produce a precipitate. After further separation by column chromatography, purities of 91.4 and 96.2% (from gas chromatography-mass spectrometry) were obtained for syringol and acetosyringone, respectively. Their recoveries for the whole process were 73.0 and 39.3%, respectively.

Recent Advances in the Determination of Pesticides in Environmental Samples by Capillary Electrophoresis

Nowadays, owing to the increasing population and the attempts to satisfy its needs, pesticides are widely applied to control the quantity and quality of agricultural products. However, the presence of pesticide residues and their metabolites in environmental samples is hazardous to the health of humans and all other living organisms. Thus, monitoring these compounds is extremely important to ensure that only permitted levels of pesticide are consumed. To this end, fast, reliable, and environmentally friendly methods that can accurately analyze dilute, complex samples containing both parent substances and their metabolites are required. Focusing primarily on research published since 2010, this review summarizes the use of various sample pretreatment techniques to extract pesticides from various matrices, combined with on-line preconcentration strategies for sensitivity improvement, and subsequent capillary electrophoresis analysis.

Sensitive Detection of Organophosphorus Pesticides in Medicinal Plants Using Ultrasound-Assisted Dispersive Liquid-Liquid Microextraction Combined with Sweeping Micellar Electrokinetic Chromatography

A simple, rapid, and sensitive method using ultrasound-assisted dispersive liquid-liquid microextraction (UA-DLLME) combined with sweeping micellar electrokinetic chromatography (sweeping-MEKC) has been developed for the determination of nine organophosphorus pesticides (chlorfenvinphos, parathion, quinalphos, fenitrothion, azinphos-ethyl, parathion-methyl, fensulfothion, methidathion, and paraoxon). The important parameters that affect the UA-DLLME and sweeping efficiency were investigated. Under the optimized conditions, the proposed method provided 779.0-6203.5-fold enrichment of the nine pesticides compared to the normal MEKC method. The limits of detection ranged from 0.002 to 0.008 mg kg(-1). The relative standard deviations of the peak area ranged from 1.2 to 6.5%, indicating the good repeatability of the method. Finally, the developed UA-DLLME-sweeping-MEKC method has been successfully applied to the analysis of the investigated pesticides in several medicinal plants, including Lycium chinense, Dioscorea opposite, Codonopsis pilosula, and Panax ginseng, indicating that this method is suitable for the determination of trace pesticide residues in real samples with complex matrices.

Separation of Peptides by Capillary Electrophoresis

Peptides are an important class of analytes in chemistry, biochemistry, food chemistry, as well as medical and pharmaceutical sciences including biomarker analysis in peptidomics and proteomics. As a high-resolution technique, capillary electrophoresis (CE) is well suited for the analysis of polar compounds such as peptides. In addition, CE is orthogonal to high-performance liquid chromatography (HPLC) as both techniques are based on different physicochemical separation principles. For the successful development of peptide separations by CE, operational parameters including puffer pH, buffer concentration and buffer type, applied voltage, capillary dimensions, as well as background electrolyte additives such as detergents, ion-pairing reagents, cyclodextrins, (poly)amines, and soluble polymers have to be considered and optimized.

High-throughput modified QuEChERS method for the determination of the mycotoxin tenuazonic acid in wine grapes

Development and validation of a robust QuEChERS method for the quantification of tenuazonic acid in grapes.

Evaluation of fritless solid-phase extraction coupled on-line with capillary electrophoresis-mass spectrometry for the analysis of opioid peptides in cerebrospinal fluid

Fritless SPE on-line coupled to CE with UV and MS detection (SPE-CE-UV and SPE-CE-MS) was evaluated for the analysis of opioid peptides. A microcartridge of 150 μm id was packed with a C18 sorbent (particle size > 50 μm), which was retained between a short inlet capillary and a separation capillary (50 μm id). Several experimental parameters were optimized by SPE-CE-UV using solutions of dynorphin A (DynA), endomorphin 1 (End1), and methionine-enkephaline (Met). A microcartridge length of 4 mm was selected, sample was loaded for 10 min at 930 mbar and the retained peptides were eluted with 67 nL of an acidic hydro-organic solution. Using SPE-CE-MS, peak area and migration time repeatabilities for the three opioid peptides were 12-27% and 4-5%, respectively. SPE recovery was lower for the less hydrophobic DynA (22%) than for End1 (66%) and Met (78%) and linearity was satisfactory in all cases between 5 and 60 ng/mL. The LODs varied between 0.5 and 1.0 ng/mL which represent an enhancement of two orders of magnitude when compared with CE-MS. Cerebrospinal fluid (CSF) samples spiked with the opioid peptides were analyzed to demonstrate the applicability to biological samples. Peak area and migration time repeatabilities were similar to the standard solutions and the opioid peptides could be detected down to 1.0 ng/mL.