Expanding the scope of pressure-assisted electrokinetic injection for online concentration of positively charged analytes in capillary electrophoresis-mass spectrometry

Pressure-assisted electrokinetic injection for the stacking of biogenic amines gives enhancement factor up to 1000 in CE with UV detection

Pressure-assisted electrokinetic injection (PAEKI) was applied for stacking of positively charged biogenic amines (BAs) to improve the sensitivity of capillary electrophoresis (CE). It is well known that the essential step for PAEKI is finding a stationary state of the running buffer such that the movement of the running buffer due to electroosmotic flow (EOF) is counterbalanced by external pressure in the opposite direction of the EOF under a given electric field. In order to find the balance point systematically and integrally, we studied the velocity of the whole BGE in the capillary by the impetus of opposite direction pressure (-0.1 to -0.6 psi), and the velocity of EOF with different voltages. According to the two sets of linear data, the EOF of CE coupled with PAEKI could be counterbalanced at the opposite direction pressure (-0.1 psi) and voltage (7.8 kV). In this study, the injection time was extended up to 0.35 min for all BAs and 0.70 min for the direct ultraviolet (UV) detection of BAs. Compared with hydrodynamic injection (HDI), the enrichment factors for sample injection times of 0.35 min and 0.70 min were 480-fold and 970-fold, respectively. The limits of detection (LODs) (S/N = 3) of indirect and direct UV detection were respectively 8.7-24.3 nmol L^-1 and 0.4-4.5 nmol L^-1, which reaches the sensitivity of high-performance liquid chromatography-mass spectrophotometry (HPLC-MS). With appropriate sample dilution, PAEKI can be used in the analysis of BAs in chicken.

Analytical strategies for the determination of amino acids: Past, present and future trends

This review describes the analytical methods that have been developed over the years to tackle the high polarity and non-chromophoric nature of amino acids (AAs). First, the historical methods are briefly presented, with a strong focus on the use of derivatization reagents to make AAs detectable with spectroscopic techniques (ultraviolet and fluorescence) and/or sufficiently retained in reversed phase liquid chromatography. Then, an overview of the current analytical strategies for achiral separation of AAs is provided, in which mass spectrometry (MS) becomes the most widely used detection mode in combination with innovative liquid chromatography or capillary electrophoresis conditions to detect AAs at very low concentration in complex matrixes. Finally, some future trends of AA analysis are provided in the last section of the review, including the use of supercritical fluid chromatography (SFC), multidimensional liquid chromatography and electrophoretic separations, hyphenation of ion exchange chromatography to mass spectrometry, and use of ion mobility spectrometry mass spectrometry (IM-MS). Various application examples will also be presented throughout the review to highlight the benefits and limitations of these different analytical approaches for AAs determination.

Field-amplified sample injection combined with capillary electrophoresis for the simultaneous determination of five chlorophenols in water samples

A sensitive method of CZE-ultraviolet (UV) detection based on the on-line preconcentration strategy of field-amplified sample injection (FASI) was developed for the simultaneous determination of five kinds of chlorophenols (CPs) namely 4-chlorophenol (4-CP), 2-chlorophenol (2-CP), 2,4-dichlorophenol (2,4-DCP), 2,4,6-trichlorophenol (2,4,6-TCP), and 2,6-dichlorophenol (2,6-DCP) in water samples. Several parameters affecting CZE and FASI conditions were systematically investigated. Under the optimal conditions, sensitivity enhancement factors for 4-CP, 2-CP, 2,4-DCP, 2,4,6-TCP, and 2,6-DCP were 9, 27, 35, 43, and 43 folds, respectively, compared with the direct CZE, and the baseline separation was achieved within 5 min. Then, the developed FASI-CZE-UV method was applied to tap and lake water samples for the five CPs determination. The LODs (S/N = 3) were 0.0018-0.019 µg/mL and 0.0089-0.029 µg/mL in tap water and lake water, respectively. The values of LOQs in tap water (0.006-0.0074 µg/mL) were much lower than the maximum permissible concentrations of 2,4,6-TCP, 2,4-DCP, and 2-CP in drinking water stipulated by World Health Organization (WHO) namely 0.3, 0.04, and 0.01 µg/mL, respectively, and thereby the method was suitable to detect the CPs according to WHO guidelines. Furthermore, the method attained high recoveries in the range of 83.0-119.0% at three spiking levels of five CPs in the two types of water samples, with relative standard deviations of 0.37-8.58%. The developed method was proved to be a simple, sensitive, highly automated, and efficient alternative to CPs determination in real water samples.

Background conductivity independent counter flow preconcentration method for capillary electrophoresis

A preconcentration method for anions is presented, which relies on a trap created by applying an electric field against a hydrodynamic flow of the sample. The trapping zone is created in front of a cation exchange membrane that allows the isolation of the electrode and thus prevents any interference by electrolysis products. Preconcentration factors of up to 20 were demonstrated for nitrate and formate as model analyte ions and were linearly related to the sample volume passed through the trap. A discrimination between the ions was found possible by adjustment of the hydrodynamic flow velocity. The method was also found to be suitable for the preconcentration of an anion (nitrate at 100 μM) in presence of a second anion at a very high concentration (50 mM formate). The detection limits for the four anions chloride, nitrate, perchlorate, and formate could be lowered from 4, 4.3, 4.2, and 7.2 μM obtained without trapping respectively to 127, 142, 139, and 451 nM with trapping.

Recent progress of sample stacking in capillary electrophoresis (2014-2016)

The term "sample stacking" comprises a relatively broad spectrum of techniques that already form an almost inherent part of the methodology of CZE. Their principles are different but the effect is the same: concentration of a diluted analyte into a narrow zone and considerable increase of the method sensitivity. This review brings a survey of papers on electrophoretic sample stacking published approximately since the second quarter of 2014 till the first quarter of 2016. It is organized according to the principles of the stacking methods and includes chapters aimed at the concentration adjustment principle (Kohlrausch stacking), techniques based on pH changes, micellar methods, and other stacking techniques. Not reviewed are papers on transient ITP that are covered by another review in this issue.