Impact of nanotechnology on progress of flow methods in chemical analysis: A review

In evolution of instrumentation for analytical chemistry as crucial technological breakthroughs should be considered a common introduction of electronics with all its progress in integration, and then microprocessors which was followed by a widespread computerization. It is seems that a similar role can be attributed to the introduction of various elements of modern nanotechnology, observed with a fast progress since beginning of this century. It concerns all areas of the applications of analytical chemistry, including also progress in flow analysis, which are being developed since the middle of 20th century. Obviously, it should not be omitted the developed earlier and analytically applied planar structures like lipid membranes or self-assembled monolayers They had essential impact prior to discoveries of numerous extraordinary nanoparticles such as fullerenes, carbon nanotubes and graphene, or nanocrystalline semiconductors (quantum dots). Mostly, due to catalytic effects, significantly developed surface and the possibility of easy functionalization, their application in various stages of flow analytical procedures can significantly improve them. The application of new nanomaterials may be used for the development of new detection methods for flow analytical systems in macro-flow setups as well as in microfluidics and lateral flow immunoassay tests. It is also advantageous that quick flow conditions of measurements may be helpful in preventing unfavorable agglomeration of nanoparticles. A vast literature published already on this subject (e.g. almost 1000 papers about carbon nanotubes and flow-injection analytical systems) implies that for this reviews it was necessary to make an arbitrary selection of reported examples of this trend, focused mainly on achievements reported in the recent decade.

Enhanced enantioseparation of drugs by capillary electrochromatography with a L-cysteine functionalized gold nanoparticle based stationary phase

Nanoparticles, which have unique properties, have attracted growing attention in enantiomeric separation nowadays. In this paper, an L-cysteine functionalized gold nanoparticle (L-Cys-GNP) based capillary column was prepared and applied in separating drug enantiomers in capillary electrochromatography (CEC) with lactobionic acid (LA) as a chiral selector. Compared with bare fused-silica capillary columns, the capillary columns modified with L-Cys-GNPs showed excellent chiral separation performance. A series of parameters affecting the enantiomeric separation were systematically investigated.

Simple and robust differentiation of Ganoderma species by high performance thin-layer chromatography coupled with single quadrupole mass spectrometry QDa

In this study, a high performance thin-layer chromatography/single quadrupole mass spectrometry QDa (HPTLC-QDa) method for robust authentication of Ganoderma lucidum, a popular and valuable herbal medicine, has been developed. This method is simple and practical, which allows direct generation of characteristic mass spectra from the HPTLC plates automatically with the application of in situ solvent desorption interface. The HPTLC silica gel plates were developed with toluene-ethyl formate-formic acid (5 : 5 : 0.2, V/V) and all bands were transferred to QDa system directly in situ using 80% methanol with 0.1% formic acid as desorption solvent. The acquired HPTLC-QDa spectra showed that luminous yellow band b3, containing ganoderic acid B/G/H and ganodeneric acid B, the major active components of Ganoderma, could be found only in G. lucidum and G. lucidum (Antler-shaped), but not in G. sinense and G. applanatum. Moreover, bands b13 and b14 with m/z 475/477 and m/z 475/491/495, respectively, could be detected in G. lucidum (Antler-shaped), but not in G. lucidum, thus allowing simple and robust authentication of G. lucidum with confused species. This method is proved to be simple, practical and reproducible, which can be extended to analyze other herbal medicines.

Recent advancements in open-tubular liquid chromatography and capillary electrochromatography during 2014-2018

This review critically discusses the developments on open-tubular liquid chromatography (OT-LC) and open-tubular capillary electrochromatography (OT-CEC) during 2014-2018. An appropriate Scopus search revealed 5 reviews, 4 theoretical papers on open-tubular format chromatography, 29 OT-LC articles, 68 OT-CEC articles and 4 OT-LC/OT-CEC articles, indicating a sustained interest in these areas. The open-tubular format typically uses a capillary column with inner walls that are coated with an ample layer or coating of solid stationary phase material. The ratio between the capillary internal diameter and coating thickness (CID/CT) is ideally ≤ 100 for appropriate chromatographic retention. We, therefore, approximated the CID/CT ratios and found that 22 OT-LC papers have CID/CT ratios ≤100. The other 7 OT-LC papers have CID/CT ratio >100 but have clearly demonstrated chromatographic retention. These 29 papers utilised reversed phase or ion exchange mechanisms using known or innovative solid stationary phase materials (e.g. metal organic frameworks), stationary pseudophases from ionic surfactants or porous supports. On the other hand, we found that 68 OT-CEC papers, 7 OT-LC papers and 4 OT-LC & OT-CEC papers have CID/CT ratios >100. Notably, 44 papers (42 OT-CEC and 2 OT-LC & OT-CEC) did not report the retention factor and/or effective electrophoretic mobility of analytes. Considering all covered papers, the most popular activity was on the development of new chromatographic materials as coatings. However, we encourage OT-CEC researchers to not only characterise changes in the electroosmotic flow but also verify the interaction of the analytes with the coating. In addition, the articles reported were largely driven by stationary phase or support development and not by practical applications.

Recent developments in open tubular capillary electrochromatography from 2016 to 2017

Interest in open-tubular capillary electrochromatography (OT-CEC) continues to thrive because of the inherent advantage of OT-CEC combining the high efficiency of capillary electrophoresis and the high selectivity of high performance liquid chromatography. For the period 2016 to 2017, novel materials have been developed as first-time stationary phases for OT-CEC and are grouped in this review as polymer-based materials, frameworks, nanoparticles, graphene-based materials, and biomaterials. Coating and fabrication methods mostly rely on covalent coating strategies while non-covalent immobilisation strategies like electrostatic assembly are notably still being employed. The concern of overcoming phase ratio challenges in OT-CEC coatings have also generated adoption of combined coating strategies including multi-layering, layer-by-layer self-assembly and methods adapted from nanofilm fabrications like epitaxial growth, liquid phase deposition, or nucleation of crystal growth. The emergence of non-conventional coating characterisation methods such as transmission electron microscopy, X-ray diffraction or X-ray photoelectron spectroscopy is also discussed.