Chiral separation of lansoprazole and rabeprazole by capillary electrophoresis using dual cyclodextrin systems

Validated chromatographic approach for determination of two ternary mixtures in newly approved formulations for helicobacter pylori eradication: assessment of greenness profile and content uniformity

A new, sensitive, and rapid isocratic reversed phase chromatographic method (RP-HPLC-UV) was developed for simultaneous separation of two newly co-formulated antiulcer mixtures; Amoxicillin, Vonoprazan and Clarithromycin [Mixture (I)], and Amoxicillin, Lansoprazole and Clarithromycin [Mixture (II)]. Analytical separation was performed using a Promosil C18 column and ultraviolet detection at 210 nm. The separation was achieved within only 8 min. For both mixtures, an aqueous solution, composed of (Acetonitrile: Methanol: 0. 2 M phosphoric acid) within ratio of (30: 30: 40) adjusted to final pH 3.0, was the mobile phase. This method was validated as per the International Conference on Harmonization guidelines. The linearity ranges of these proposed method of the (Mixture (I)) were 25.0-400.0 µg/mL Amoxicillin, 0.5-8.0 µg/mL Vonoprazan, and 12.5-200.0 µg/mL Clarithromycin. And the linearity ranges of the (Mixture (II)) were 10.0-300.0 µg/mL Amoxicillin, 0.3-9.0 µg/mL Lansoprazole and 5.0-150.0 µg/mL Clarithromycin. This method was firstly applied for effective separation of Amoxicillin, Vonoprazan and Clarithromycin [Mixture (I)]. It fulfilled good repeatability, sensitivity, and accuracy (R.S.D. < 2.0%). The mean recoveries of the analytes in their Tri-Pak formulations were acceptable. The greenness of the developed chromatographic methods was assessed using an Eco-scale method and it was applied for content uniformity testing as per the United States Pharmacopoeia (USP) and the acceptance value of Amoxicillin, in Mixture (I) was 2.88, the acceptance values for Amoxicillin, Lansoprazole in Mixture (II) were 2.592, 2.424, respectively.

From capillaries to microchips, green electrophoretic features for enantiomeric separations: A decade review (2013-2022)

Enantioseparation by the electromigration-based method is well-established and widely discussed in the literature. Electrophoretic strategies have been used to baseline resolve complex enantiomeric mixtures, typically using a selector substance into the background electrolyte (BGE) from capillaries to microchips. Along with developing new materials/substances for enantioseparations, it is the concern about the green analytical chemistry (GAC) principles for method development and application. This review article brings a last decade's update on the publications involving enantioseparation by electrophoresis for capillary and microchip systems. It also brings a critical discussion on GAC principles and new green metrics in the context of developing an enantioseparation method. Chemical and green features of native and modified cyclodextrins are discussed. Still, given the employment of greener substances, ionic liquids and deep-eutectic solvents are highlighted, and some new selectors are proposed. For all the mentioned selectors, green features about their production, application, and disposal are considered. Sample preparation and BGE composition in GAC perspective, as well as greener derivatization possibilities, were also addressed. Therefore, one of the goals of this review is to aid the electrophoretic researchers to look where they have not.

Progress of Pretreatment and Analytical Methods of Proton Pump Inhibitors: An Update since 2010

Proton pump inhibitors (PPIs) are the most commonly used medication for stomach secretion disorders. However, when it comes to safe, discreet pharmaceutical practice, widely recognized preparational and analytical method(s) for PPIs with sensitivity, selectivity, speed and high accuracy still remains underdeveloped. For this reason, this paper sets out to make a comprehensive review of the preparation and determination methods for PPIs based on multiple matrices since 2010. We have integrated newly-developed techniques (such as solid phase extraction, liquid phase micro-extraction, and solid phase micro-extraction) into conventional sample preparational methods. On the other hand, our analytical techniques include liquid chromatography, supercritical fluid chromatography, capillary electrophoresis, and employment of sensors. In addition, we have identified the pros and cons of each technique and have forecast their future developmental trends.

New Trends in the Quality Control of Enantiomeric Drugs: Quality by Design-Compliant Development of Chiral Capillary Electrophoresis Methods

Capillary electrophoresis (CE) is a potent method for analyzing chiral substances and is commonly used in the enantioseparation and chiral purity control of pharmaceuticals from different matrices. The adoption of Quality by Design (QbD) concepts in analytical method development, optimization and validation is a widespread trend observed in various analytical approaches including chiral CE. The application of Analytical QbD (AQbD) leads to the development of analytical methods based on sound science combined with risk management, and to a well understood process clarifying the influence of method parameters on the analytical output. The Design of Experiments (DoE) method employing chemometric tools is an essential part of QbD-based method development, allowing for the simultaneous evaluation of experimental parameters as well as their interaction. In 2022 the International Council for Harmonization (ICH) released two draft guidelines (ICH Q14 and ICH Q2(R2)) that are intended to encourage more robust analytical procedures. The ICH Q14 guideline intends to harmonize the scientific approaches for analytical procedures’ development, while the Q2(R2) document covers the validation principles for the use of analytical procedures including the recent applications that require multivariate statistical analyses. The aim of this review is to provide an overview of the new prospects for chiral CE method development applied for the enantiomeric purity control of pharmaceuticals using AQbD principles. The review also provides an overview of recent research (2012–2022) on the applicability of CE methods in chiral drug impurity profiling.

A chemometric experimental design with three-step stacking capillary electrophoresis for analysis of five tobacco-specific nitrosamines in cigarette products

Tobacco-specific nitrosamines (TSNAs) as carcinogens endanger our health and life from cigarette products. However, the safe range of TSNAs levels in commercial cigarette products has not yet been established. For the purpose of safety and supervision, a three-step stacking approach including field amplified sample injection (FASI), sweeping, and analyte focusing by micelle collapse (AFMC), was developed for the simultaneous determination of five TSNAs levels in cigarette products. This approach also involved aspects of chemometric experimental design, including fractional factorial design and central composite design. After the multilevel optimization of the experimental design, the five TSNAs were well separated. The LOD (S/N = 3) values of the N´-nitrosonornicotine (NNN), N´-nitrosoanatabine (NAT), N´-nitrosoanabasine (NAB), 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanol (NNAL), and 4-(methylnitrosamino)-1-(3-pyridyl)-1-butanone (NNK) in the FASI-sweeping-AFMC CE approach were 1.000 ng/mL, 0.500 ng/mL, 0.125 ng/mL, 1.000 ng/mL, and 0.500 ng/mL respectively. The results of relative standard deviation (RSD) and relative error (RE) were all less than 3.35%, demonstrating good precision and accuracy. Finally, this novel approach was further applied to monitor three commercial cigarette products, and a range of 250.1-336.6 ng/g for NNN, 481.6-526.7 ng/g for NAT, 82.2-247.6 ng/g for NAB, 167.7-473.7 ng/g for NNAL, and 39.4-246.7 ng/g for NNK could be observed among these. Based on these results, the novel CE stacking strategy was successfully applied for the analysis of five TSNAs levels in cigarette products and could serve as a tool for assays of quality control of nitrosamines.

Application of Experimental Design Methodologies in the Enantioseparation of Pharmaceuticals by Capillary Electrophoresis: A Review

Chirality is one of the major issues in pharmaceutical research and industry. Capillary electrophoresis (CE) is an interesting alternative to the more frequently used chromatographic techniques in the enantioseparation of pharmaceuticals, and is used for the determination of enantiomeric ratio, enantiomeric purity, and in pharmacokinetic studies. Traditionally, optimization of CE methods is performed using a univariate one factor at a time (OFAT) approach; however, this strategy does not allow for the evaluation of interactions between experimental factors, which may result in ineffective method development and optimization. In the last two decades, Design of Experiments (DoE) has been frequently employed to better understand the multidimensional effects and interactions of the input factors on the output responses of analytical CE methods. DoE can be divided into two types: screening and optimization designs. Furthermore, using Quality by Design (QbD) methodology to develop CE-based enantioselective techniques is becoming increasingly popular. The review presents the current use of DoE methodologies in CE-based enantioresolution method development and provides an overview of DoE applications in the optimization and validation of CE enantioselective procedures in the last 25 years. Moreover, a critical perspective on how different DoE strategies can aid in the optimization of enantioseparation procedures is presented.

Polysaccharide- and β-Cyclodextrin-Based Chiral Selectors for Enantiomer Resolution: Recent Developments and Applications

Polysaccharides, oligosaccharides, and their derivatives, particularly of amylose, cellulose, chitosan, and β-cyclodextrin, are well-known chiral selectors (CSs) of chiral stationary phases (CSPs) in chromatography, because they can separate a wide range of enantiomers. Typically, such CSPs are prepared by physically coating, or chemically immobilizing the polysaccharide and β-cyclodextrin derivatives onto inert silica gel carriers as chromatographic support. Over the past few years, new chiral selectors have been introduced, and progressive methods to prepare CSPs have been exploited. Also, chiral recognition mechanisms, which play a crucial role in the investigation of chiral separations, have been better elucidated. Further insights into the broad functional performance of commercially available chiral column materials and/or the respective newly developed chiral phase materials on enantiomeric separation (ES) have been gained. This review summarizes the recent developments in CSs, CSP preparation, chiral recognition mechanisms, and enantiomeric separation methods, based on polysaccharides and β-cyclodextrins as CSs, with a focus on the years 2019-2020 of this rapidly developing field.

Preparation of a polydopamine/β-cyclodextrin coated open tubular capillary electrochromatography column and application for enantioseparation of five proton pump inhibitors

An open tubular capillary electrochromatography column was prepared by immobilizing β-cyclodextrin on the inner wall of pretreated capillary via noncovalent adsorption of polydopamine. The resulting coating layer on the capillary was characterized by scanning electron microscopy and Fourier transform infrared spectroscopy. Electroosmotic flow was studied to evaluate the variation of the immobilized columns. The prepared columns showed good chiral separation performance toward five proton pump inhibitors including lansoprazole, pantoprazole, tenatoprazole, rabeprazole, and omeprazole. The influences of β-cyclodextrin concentration, coating time, buffer pH, buffer concentration, and applied voltage on separation were investigated. In the optimum conditions, the enantiomers of five analytes were fully resolved within 15 min with high resolutions of 4.57 to 8.13. The method was extensively validated in terms of accuracy, precision, and linearity and proved to be robust. The relative standard deviation values for migration times and peak areas of the analytes representing intraday and interday were less than 1.9 and 3.6%, respectively. Further, the polydopamine/β-cyclodextrin coated capillary column could be successively used over 100 runs without showing significant decrease in the separation efficiency.

Chiral separation in the class of proton pump inhibitors by chromatographic and electromigration techniques: An overview

Proton pump inhibitors (PPIs) are benzimidazole-derivative chiral sulfoxides, frequently used in the treatment of gastric hyperacidity-related disorders. Due to their stereoselective metabolism, the eutomeric forms of PPIs can present a more advantageous pharmacokinetic profile by comparison with the distomers or racemates. Moreover, two representatives of the class are used in therapy both as racemates and as pure enantiomers (esomeprazole, dexlansoprazole). A relatively large number of enantioseparation methods employed for the stereoselective determination of PPIs from pharmaceutical, biological, and environmental matrices were published in the past three decades. The purpose of the current overview is to provide a systematic survey of the available chiral separation methods published since the introduction of PPIs in the therapy up to the present. Analytical and bioanalytical methods using different chromatographic and electromigration techniques reported for the enantioseparation of omeprazole, lansoprazole, pantoprazole, rabeprazole, ilaprazole, and tenatoprazole are included. The analytical conditions of the presented methods are summarized in three comprehensive tables, while a critical discussion of the applied techniques, possible mechanism of enantiorecognition, and future perspectives on the topic are also presented.

Chiral Capillary Electrokinetic Chromatography: Principle and Applications, Detection and Identification, Design of Experiment, and Exploration of Chiral Recognition Using Molecular Modeling

This work reviews the literature of chiral capillary electrokinetic chromatography from January 2016 to March 2021. This is done to explore the state-of-the-art approach and recent developments carried out in this field. The separation principle of the technique is described and supported with simple graphical illustrations, showing migration under normal and reversed polarity modes of the separation voltage. The most relevant applications of the technique for enantioseparation of drugs and other enantiomeric molecules in different fields using chiral selectors in single, dual, or multiple systems are highlighted. Measures to improve the detection sensitivity of chiral capillary electrokinetic chromatography with UV detector are discussed, and the alternative aspects are explored, besides special emphases to hyphenation compatibility to mass spectrometry. Partial filling and counter migration techniques are described. Indirect identification of the separated enantiomers and the determination of enantiomeric migration order are mentioned. The application of Quality by Design principles to facilitate method development, optimization, and validation is presented. The elucidation and explanation of chiral recognition in molecular bases are discussed with special focus on the role of molecular modeling.

The Use of Dual Cyclodextrin Chiral Selector Systems in the Enantioseparation of Pharmaceuticals by Capillary Electrophoresis: An Overview

Cyclodextrin (CD) derivatives are the most efficient and frequently used chiral selectors (CSs) in capillary electrophoresis (CE). There are situations when the use of a single CD as CS is not enough to obtain efficient chiral discrimination of the enantiomers; in these cases, sometimes this problem can be resolved using a dual CD system. The use of dual CD systems can often dramatically enhance enantioseparation selectivity and can be applied for the separation of many analytes of pharmaceutical interest for which enantioseparation by CE with another CS systems can be problematic. Usually in a dual CD system an anionic CD is used together with a neutral one, but there are situations when the use of a cationic CD with a neutral one or the use of two neutral CDs or even two ionized CDs can be an efficient solution. In the current review we present general aspects of the use of dual CD systems in the analysis of pharmaceutical substances. Several examples of applications of the use of dual CD systems in the analysis of pharmaceuticals are selected and discussed. Theoretical aspects regarding the separation of enantiomers through simultaneous interaction with the two CSs are also explained. Finally, advantages, disadvantages, potential and new direction in this chiral analysis field are highlighted.

An appraisal of experimental designs: Application to enantioselective capillary electromigration techniques

Enantioresolution processes are vital tools for investigating the enantioselectivities of chiral compounds. An analyst resolves to optimize enantioresolution conditions once they are determined. Generally, optimization is conducted by a one-factor-at-a-time (OFAT) approach. Although this approach may determine an adequate condition for the method, it does not often allow the estimation of the real optimum condition. Experimental designs are conducive for the optimization of enantioresolution methods via capillary electromigration techniques (CETs). They can efficiently extract information from the behavior of a method and enable the estimation of the real optimum condition. Furthermore, the application of the analytical quality by design (AQbD) approach to the development of CET-based enantioselective methods is a trend. This article (i) offers an overview of the application of experimental designs to the development of enantioselective methods from 2015 to mid-2020, (ii) reveals the experimental designs that are presently employed in CET-based enantioresolutions, and (iii) offers a critical point of view on how the different experimental designs can aid the optimization of enantioresolution processes by considering the method parameters.

Capillary electrophoresis and molecular modeling of the chiral separation of aromatic amino acids using α/β-cyclodextrin and 18-crown-6

In this work, chiral separation of enantiomers of three amino acids was achieved using capillary electrophoresis technique with α-cyclodextrin (αCD) as a running buffer additive. Only tryptophan has exhibited baseline separation in the presence of αCD, while the enantiomers of the other two amino acids, phenylalanine and tyrosine, were only partially separated. The addition of 18-crown-6 (18C6) as a second additive imparted only slight improvement to the separation of all enantiomers. On the other hand, all three racemic amino acid mixtures demonstrated no indication of separation when the larger cavity cyclodextrin members, β- and γCD, are used as running buffer chiral additives. However, remarkable improvements in the separation of the enantiomers of phenylalanine and tyrosine were obtained when 18C6 is used together with βCD as a running buffer additive. Surprisingly, tryptophan enantiomers were not separated by the dual additive system of cyclodextrin and crown ether. Using electrospray ionization mass spectrometry (ESI-MS), all amino acids were found to form stable binary complexes with individual hosts as well as ternary compounds involving the crown ether and the cyclodextrin. Furthermore, we used molecular dynamics (MD) simulations to build a clear picture about the interaction between the guest and the hosts. Most of these complexes remained stable throughout the simulation times, and the molecular dynamics study allowed better understanding of these supramolecular assemblies.

Rabeprazole: A comprehensive profile

Rabeprazole belongs to the class of anti-secretory drugs, with benzimidazoles substitution. These drugs induce gastric acid secretion through precise inhibition of the enzyme H⁺/K⁺-ATPase (acid or proton pump). This effect helps to treat and prevent conditions in which gastric acid directly aggravates symptoms such as duodenal and gastric ulcers. This chapter includes a comprehensive review of rabeprazole in terms of nomenclature, its physical-chemical properties, methods of preparation and ADME profiles. In addition, the chapter also includes a review of several methods for analysis of rebeprazole in its dosage forms and biological fluids.

Advances of capillary electrophoresis enantioseparations in pharmaceutical analysis (2017-2020)

Capillary electrophoresis is a powerful technique for the analysis of polar chiral compounds and has been widely accepted for analytical enantioseparations of drug compounds in pharmaceuticals and biological media. In addition, many mechanistic studies have been conducted in an attempt to rationalize enantioseparations in combination with spectroscopic and computational techniques. The present review will focus on recent examples of mechanistic aspects and summarize recent applications of stereoselective pharmaceutical and biomedical analysis published between January 2017 and November 2020. Various separation modes including electrokinetic chromatography in combination with several detection modes including laser-induced fluorescence, mass spectrometry and contactless conductivity detection will be discussed. A general trend also observed in other analytical techniques is the application of quality by design principles in method development and optimization.

Negatively charged cyclodextrins: Synthesis and applications in chiral analysis-A review

The negatively charged cyclodextrins (CDs) play an important role in chiral analysis due to the additional electrostatic effect beyond the host-guest inclusion, especially in enantioanalysis of positively charged and electrically neutral analytes. This review presents recent advances in application of anionic CDs for enantioanalysis during the past five years. Firstly, the synthesis approaches of random substitution and single isomers of anionic CDs are briefly discussed. The main part focuses on the chiral analysis using anionic CDs in various analytical techniques, including capillary electrophoresis, high-performance liquid chromatography, capillary electrochromatography, counter current chromatography, nuclear magnetic resonance, etc. Particular attention is given to the capillary electrophoresis application since charged CDs could be used as a carrier of enantiomers by virtue of their self-mobility and offer an easy adjustment of the enantiomer migration order. Finally, future opportunities are also discussed in the conclusion of this review.

Capillary electrophoretic methods for quality control analyses of pharmaceuticals: A review

Capillary electrophoresis represents a promising technique in the field of pharmaceutical analysis. The presented review provides a summary of capillary electrophoretic methods suitable for routine quality control analyses of small molecule drugs published since 2015. In total, more than 80 discussed methods are sorted into three main sections according to the applied electroseparation modes (capillary zone electrophoresis, electrokinetic chromatography, and micellar, microemulsion, and liposome-electrokinetic chromatography) and further subsections according to the applied detection techniques (UV, capacitively coupled contactless conductivity detection, and mass spectrometry). Key parameters of the procedures are summarized in four concise tables. The presented applications cover analyses of active pharmaceutical ingredients and their related substances such as degradation products or enantiomeric impurities. The contribution of reported results to the current knowledge of separation science and general aspects of the practical applications of capillary electrophoretic methods are also discussed.