Solar photocatalytic removal of metal ions from industrial wastewater

A review of chloride ions removal from high chloride industrial wastewater: Sources, hazards, and mechanisms

To reduce metal pipe corrosion, improve product quality, and meet zero liquid discharge (ZLD) criteria, managing chloride ion concentrations in industrial wastewaters from metallurgical and chemical sectors has become increasingly important. This review provides detailed information on the sources, concentration levels, and deleterious effects of chloride ions in representative industrial wastewaters, and also summarizes and discusses various chloride ion removal techniques, including precipitation, ion exchange, physical separation, and advanced oxidation (AOPs). Among these, AOPs are particularly promising due to their ability to couple with other technologies and the diversity of their auxiliary technologies. The development of dechlorination electrode materials by electro-adsorption (CDI) can be inspired by the electrode materials used in chloride ion battery (CIB). This review also provides insights into exploring the effective combination of multiple chloride removal mechanisms, as well as the development of environmentally friendly composite materials. This review provides a theoretical basis and development direction for the effective treatment and secondary utilization of chlorine-containing industrial wastewater in the future.

Potentiality of sewage sludge-based organo-mineral fertilizer production in Poland considering nutrient value, heavy metal content and phytotoxicity for rapeseed crops

Sewage sludge is a valuable source of nutrients and organic matter, which are beneficial for plant growth. The use of sewage sludge for agricultural purposes can be limited by the potential content of heavy metals and toxic organic compounds that pose a threat to the environment. The characterisation of sewage sludges from 11 Polish wastewater treatment plants (WWTPs) in terms of their fertilizing properties and heavy metal contents are presented in the study. Based on the chemical composition of sewage sludge from the WWTP in Żywiec, the compositions of organo-mineral fertilizers dedicated for rapeseed crop was developed. Alternative raw materials such as poultry litter ash and biomass ash were considered as components for fertilizer production. The production process of organo-mineral fertilizers included mixing sewage sludge with poultry litter ash/biomass ash and mineral fertilizers and granulation with mineral acids. The final products contained 24-34% of total NPK and fulfilled the requirements regarding heavy metal content according to Polish legislation. Using sewage sludge for fertilizer production is a promising solution for sewage sludge management, allowing the recycling of 82-140 tonnes of phosphorus (as P₂O₅) and 42-73 tonnes of nitrogen (N) annually in the WWTP in Żywiec.

Removal of copper from water using a thermally regenerative electrodeposition battery

A thermally regenerative ammonia battery (TRAB) recently developed for electricity generation using waste heat was adapted and used here as a treatment process for solutions containing high concentrations of copper ions. Copper removal reached a maximum of 77% at an initial copper concentration (C_i) of 0.05M, with a maximum power density (P) of 31Wm^-2-electrode area. Lowering the initial copper concentration decreased the percentage of copper removal from 51% (C_i=0.01M, P=13Wm^-2) to 2% (C_i=0.002M, P=2Wm^-2). Although the final solution may require additional treatment, the adapted TRAB process removed much of the copper while producing electrical power that could be used in later treatment stages. These results show that the adapted TRAB can be a promising technology for removing copper ions and producing electricity by using waste heat as a highly available and free source of energy at many industrial sites.

Adsorptive removal of nickel(II) ions from aqueous environment: A review

Among various methods adsorption can be efficiently employed for the treatment of heavy metal ions contaminated wastewater. In this context the authors reviewed variety of adsorbents used by various researchers for the removal of nickel(II) ions from aqueous environment. One of the objectives of this review article is to assemble the scattered available enlightenment on a wide range of potentially effective adsorbents for nickel(II) ions removal. This work critically assessed existing knowledge and research on the uptake of nickel by various adsorbents such as activated carbon, non-conventional low-cost materials, nanomaterials, composites and nanocomposites. The system's performance is evaluated with respect to the overall metal removal and the adsorption capacity. In addition, the equilibrium adsorption isotherms, kinetics and thermodynamics data as well as various optimal experimental conditions (solution pH, equilibrium contact time and dosage of adsorbent) of different adsorbents towards Ni(II) ions were also analyzed. It is evident from a literature survey of more than 190 published articles that agricultural solid waste materials, natural materials and biosorbents have demonstrated outstanding adsorption capabilities for Ni(II) ions.

Highly efficient and recyclable triple-shelled Ag@Fe3O4@SiO2@TiO2 photocatalysts for degradation of organic pollutants and reduction of hexavalent chromium ions

Herein, we demonstrate the design and fabrication of the well-defined triple-shelled Ag@Fe3O4@SiO2@TiO2 nanospheres with burr-shaped hierarchical structures, in which the multiple distinct functional components are integrated wonderfully into a single nanostructure. In comparison with commercial TiO2 (P25), pure TiO2 microspheres, Fe3O4@SiO2@TiO2 and annealed Ag@Fe3O4@SiO2@TiO2 nanocomposites, the as-obtained amorphous triple-shelled Ag@Fe3O4@SiO2@TiO2 hierarchical nanospheres exhibit a markedly enhanced visible light or sunlight photocatalytic activity towards the photodegradation of methylene blue and photoreduction of hexavalent chromium ions in wastewater. The outstanding photocatalytic activities of the plasmonic photocatalyst are mainly due to the enhanced light harvesting, reduced transport paths for both mass and charge transport, reduced recombination probability of photogenerated electrons/holes, near field electromagnetic enhancement and efficient scattering from the plasmonic nanostructure, increased surface-to-volume ratio and active sites in three dimensional (3D) hierarchical porous nanostructures, and improved photo/chemical stability. More importantly, the hierarchical nanostructured Ag@Fe3O4@SiO2@TiO2 photocatalysts could be easily collected and separated by applying an external magnetic field and reused at least five times without any appreciable reduction in photocatalytic efficiency. The enhanced photocatalytic activity and excellent chemical stability, in combination with the magnetic recyclability, make these multifunctional nanostructures promising candidates to remediate aquatic contaminants and meet the demands of future environmental issues.