Evaluating porewater polycyclic aromatic hydrocarbon-related toxicity at a contaminated sediment site using a spiked field-sediment approach

Spiking organic chemicals onto sediments for ecotoxicological analyses: an overview of methods and procedures

Laboratory testing with spiked sediments with organic contaminants is a valuable tool for ecotoxicologists to study specific processes such as effects of known concentrations of toxicants, interactions of the toxicants with sediment and biota, and uptake kinetics. Since spiking of the sediment may be performed by using different strategies, a plethora of procedures was proposed in the literature for spiking organic chemicals onto sediments to perform ecotoxicological analyses. In this paper, we reviewed the scientific literature intending to characterise the kind of substrates that were used for spiking (i.e. artificial or field-collected sediment), how the substrates were handled before spiking and amended with the organic chemical, how the spiked sediment was mixed to allow the homogenisation of the chemical on the substrate and finally how long the spiked sediment was allowed to equilibrate before testing. What emerged from this review is that the choice of the test species, the testing procedures and the physicochemical properties of the organic contaminant are the primary driving factors affecting the selection of substrate type, sediment handling procedures, solvent carrier and mixing method. Finally, we provide recommendations concerning storage and characterization of the substrate, equilibrium times and verification of both equilibration and homogeneity.

Biosensor applications in contaminated estuaries: Implications for disaster research response

BACKGROUND

Given the time and monetary costs associated with traditional analytical chemistry, there remains a need to rapidly characterize environmental samples for priority analysis, especially within disaster research response (DR2). As PAHs are both ubiquitous and occur as complex mixtures at many National Priority List sites, these compounds are of interest for post-disaster exposures.

OBJECTIVE

This study tests the field application of the KinExA Inline Biosensor in Galveston Bay and the Houston Ship Channel (GB/HSC) and in the Elizabeth River, characterizing the PAH profiles of these region's soils and sediments. To our knowledge, this is the first application of the biosensor to include soils.

METHODS

The biosensor enables calculation of total free PAHs in porewater (C free), which is confirmed through gas chromatography-mass spectrometry (GC-MS) analysis. To determine potential risk of the collected soils the United States Environmental Protection (USEPA) Agency's Regional Screening Level (RSL) Calculator is used along with the USEPA Region 4 Ecological Screening Values (R4-ESV) and Refined Screening Values (R4-RSV).

RESULTS

Based on GC-MS results, all samples had PAH-related hazard indices below 1, indicating low noncarcinogenic risks, but some samples exceeded screening levels for PAH-associated cancer risks. Combining biosensor-based C free with Total Organic Carbon yields predictions highly correlated (r > 0.5) both with total PAH concentrations as well as with hazard indices and cancer risks. Additionally, several individual parent PAH concentrations in both the GB/HSC and Elizabeth River sediments exceeded the R4- ESV and R4-RSV values, indicating a need for follow-up sediment studies.

CONCLUSIONS

The resulting data support the utility of the biosensor for future DR2 efforts to characterize PAH contamination, enabling preliminary PAH exposure risk screening to aid in prioritization of environmental sample analysis.

Evaluation of Aliphatic Hydrocarbons in Surface Sediments of Lagoa Mirim (RS, Brazil)

In this study, the hydrocarbons (HCs) levels in sediments from Lagoa Mirim, situated in the south of Brazil, were verified. The methodology brought together stages of pre-sonification, soxhlet extraction, and determination by gas chromatography coupled with mass spectrometry (GC/MS). Ten sample points were evaluated where ∑n-alkanes varied between 1.46 µg kg^-1 ± 4.0% and 10.10 µg kg^-1 ± 17.6%. Diagnostic indexes were calculated, being: Carbon Preferential Index (CPI), terrestrial/aquatic ratio (TAR), unresolved complex mixture (UCM), UCM/∑n-alkanes ratio, and n-alkane ratio with Low molecular weight hydrocarbon and High molecular weight hydrocarbons (HMW/LMW). In general, the results of this study indicate a low anthropogenic impact in the environment.

Distribution, sources, and ecological risk assessment of polycyclic aromatic hydrocarbons in the sediments of Daihai Lake in Inner Mongolia, China

Polycyclic aromatic hydrocarbons (PAHs) are typical toxic organic pollutants that can accumulate in sediments and may be toxic to aquatic organisms. In the present study, the contamination level, composition pattern, and sources of sixteen PAHs listed by the United States Environmental Protection Agency were investigated in surface sediments and a sediment core from Daihai Lake, which is located in a typical semiarid area of Inner Mongolia, China, and the ecological risk of these PAHs was assessed. The results show that the total concentration of PAHs in the surface sediments ranged from 204.6 to 344.5 ng/g with an average value of 287.2 ng/g and that compared with other aquatic systems, the level of PAHs in the sediments from Daihai Lake was low. However, a general upward trend was observed for the concentrations of PAHs in the sediment core, which might be related to the increase in human activities in the area. Moreover, the PAH concentrations were significantly positively correlated with the total organic carbon (TOC) content in the sediments, and it is thus inferred that TOC regulates the distribution of PAHs in Daihai Lake. Three-ring and four-ring PAHs were found to be predominant in all the sediment samples, and phenanthrene (Phe) was the most abundant compound. According to the composition of PAHs and the anthracene (Ant)/(Ant+Phe) or fluoranthene (Flt)/(Flt+pyrene (Pyr)) ratios, the PAHs in Daihai Lake mainly originated from the combustion of domestic coal, grass, and wood, and petroleum cannot be ignored as a source considering the growth of industry. Risk assessment based on a comparison of PAH concentrations and the effect range low (ERL) and effect range median (ERM) values demonstrated that acenaphthene (Ace) at 11 sites and fluorene (Flu) at 7 sites had occasional adverse biological effects.

Evaluation of a rapid biosensor tool for measuring PAH availability in petroleum-impacted sediment

Decades of research have shown that the concentration of freely dissolved PAH (C_free) in sediment correlates with PAH bioavailability and toxicity to aquatic organisms. Passive sampling techniques and models have been used for measuring and predicting C_free, respectively, but these techniques require weeks for analytical chemical measurements and data evaluation. This study evaluated the performance of a portable, field-deployable antibody-based PAH biosensor method that can provide measurements of PAH C_free within a matter of minutes using a small volume of mechanically-extracted sediment porewater. Four sediments with a wide range of PAHs (ΣPAH 2.4 to 307 mg/kg) derived from petroleum, creosote, and mixed urban sources, were analyzed via three methods: 1) bulk chemistry analysis; 2) ex situ sediment passive sampling; and 3) biosensor analysis of mechanically-extracted sediment porewater. Mean ΣPAH C_free determined by the biosensor for the four sediments (3.1 to 55 μg/L) were within a factor of 1.1 (on average) compared to values determined by the passive samplers (2.0 to 52 μg/L). All mean values differed by a factor of 3 or less. The biosensor was also useful in identifying sediments that are likely to be non-toxic to benthic invertebrates. In two of the four sediments, biosensor results of 20 and 55 μg/L exceeded a potential risk-based screening level of 10 μg/L, indicating toxicity could not be ruled out. PAH Toxic Units (ΣTU) measured in these two sediments using the passive sampler C_free results were also greater than the ΣTU threshold of 1 (6.7 and 5.8, respectively), confirming the conclusions reached with the biosensor. In contrast, the other two sediments were identified as non-toxic by both the biosensor (3.1 and 4.3 μg/L) and the passive sampler (ΣTUs of 0.34 and 0.039). These results indicate that the biosensor is a promising tool for rapid screening of sediments potentially-impacted with PAHs.

A Critical Review of Analytical Methods for Comprehensive Characterization of Produced Water

Produced water is the largest waste stream associated with oil and gas production. It has a complex matrix composed of native constituents from geologic formation, chemical additives from fracturing fluids, and ubiquitous bacteria. Characterization of produced water is critical to monitor field operation, control processes, evaluate appropriate management practices and treatment effectiveness, and assess potential risks to public health and environment during the use of treated water. There is a limited understanding of produced water composition due to the inherent complexity and lack of reliable and standardized analytical methods. A comprehensive description of current analytical techniques for produced water characterization, including both standard and research methods, is discussed in this review. Multi-tiered analytical procedures are proposed, including field sampling; sample preservation; pretreatment techniques; basic water quality measurements; organic, inorganic, and radioactive materials analysis; and biological characterization. The challenges, knowledge gaps, and research needs for developing advanced analytical methods for produced water characterization, including target and nontarget analyses of unknown chemicals, are discussed.