Challenges and advances of organic electrode materials for sustainable secondary batteries

Interface Engineering for Aqueous Aluminum Metal Batteries: Current Progresses and Future Prospects

Aqueous aluminum metal batteries (AMBs) have attracted numerous attention because of the abundant reserves, low cost, high theoretical capacity, and high safety. Nevertheless, the poor thermodynamics stability of metallic Al anode in aqueous solution, which is caused by the self-corrosion, surface passivation, or hydrogen evolution reaction, dramatically limits the electrochemical performance and hampers the further development of AMBs. In this comprehensive review, the key scientific challenges of Al anode/electrolyte interface (AEI) are highlighted. A systematic overview is also provided about the recent progress on the rational interface engineering principles toward a relatively stable AEI. Finally, suggestions and perspectives for future research are offered on the optimization of Al anode and aqueous electrolytes to enable a stable and durable AEI, which may pave the way for developing high-performance AMBs.

Recyclable Organic Radical Electrodes for Metal-Free Batteries

Organic batteries are one of the possible routes for transitioning to sustainable energy storage solutions. However, the recycling of organic batteries, which is a key step toward circularity, is not easily achieved. This work shows the direct recycling of poly(2,2,6,6-tetramethylpiperidinyloxy-4-yl) (PTMA) and poly(2,2,6,6-tetramethylpiperidinyloxy-4-yl acrylamide) (PTAm) based composite electrodes. After charge-discharge cycling, the electrodes are deconstructed using a solubilizing-solvent and then reconstructed using a casting-solvent. The electrochemical properties of the original and recycled electrodes are compared using cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) cycling, from which it is discovered using time-of-flight secondary ion mass spectrometry (ToF-SIMS) that recycling can be challenged by the formation of a cathode electrolyte interphase (CEI). In turn, an additive is proposed to modify the CEI layer and improve the properties after recycling. Last, an anionic rocking chair battery consisting of PTAm electrodes as both positive and negative electrodes is demonstrated, in which the electrodes are recycled to form a new battery. This work demonstrates the recycling of composite electrodes for organic batteries and provides insights into the challenges and possible solutions for recycling the next-generation electrochemical energy storage devices.

Redox-Active Organic Materials: From Energy Storage to Redox Catalysis

Electroactive materials are central to myriad applications, including energy storage, sensing, and catalysis. Compared to traditional inorganic electrode materials, redox-active organic materials such as porous organic polymers (POPs) and covalent organic frameworks (COFs) are emerging as promising alternatives due to their structural tunability, flexibility, sustainability, and compatibility with a range of electrolytes. Herein, we discuss the challenges and opportunities available for the use of redox-active organic materials in organoelectrochemistry, an emerging area in fine chemical synthesis. In particular, we highlight the utility of organic electrode materials in photoredox catalysis, electrochemical energy storage, and electrocatalysis and point to new directions needed to unlock their potential utility for organic synthesis. This Perspective aims to bring together the organic, electrochemistry, and polymer communities to design new heterogeneous electrocatalysts for the sustainable synthesis of complex molecules.

Non-Metal Ion Storage in Zinc-Organic Batteries

Zinc-organic batteries (ZOBs) are receiving widespread attention as up-and-coming energy-storage systems due to their sustainability, operational safety and low cost. Charge carrier is one of the critical factors affecting the redox kinetics and electrochemical performances of ZOBs. Compared with conventional large-sized and sluggish Zn2+ storage, non-metallic charge carriers with small hydrated size and light weight show accelerated interfacial dehydration and fast reaction kinetics, enabling superior electrochemical metrics for ZOBs. Thus, it is valuable and ongoing works to build better ZOBs with non-metallic ion storage. In this review, versatile non-metallic cationic (H+, NH4 +) and anionic (Cl-, OH-, CF3SO3 -, SO4 2-) charge carriers of ZOBs are first categorized with a brief comparison of their respective physicochemical properties and chemical interactions with redox-active organic materials. Furthermore, this work highlights the implementation effectiveness of non-metallic ions in ZOBs, giving insights into the impact of ion types on the metrics (capacity, rate capability, operation voltage, and cycle life) of organic cathodes. Finally, the challenges and perspectives of non-metal-ion-based ZOBs are outlined to guild the future development of next-generation energy communities.

Modulation of Radical Intermediates in Rechargeable Organic Batteries

Organic materials have been considered as promising electrodes for next-generation rechargeable batteries in view of their sustainability, structural flexibility, and potential recyclability. The radical intermediates generated during the redox process of organic electrodes have profound effect on the reversible capacity, operation voltage, rate performance, and cycling stability. However, the radicals are highly reactive and have very short lifetime during the redox of organic materials. Great efforts have been devoted to capturing and investigating the radical intermediates in organic electrodes. Herein, this review summarizes the importance, history, structures, and working principles of organic radicals in rechargeable batteries. More importantly, challenges and strategies to track and regulate the radicals in organic batteries are highlighted. Finally, further perspectives of organic radicals are proposed for the development of next-generation high-performance rechargeable organic batteries.

Organoboron-thiophene-based polymer electrodes for high-performance lithium-ion batteries

Polymer electrodes are drawing widespread attention to the future generation of lithium-ion battery materials. However, weak electrochemical performance of organic anode materials still exists, such as low capacity, low rate performance, and low cyclability. Herein, we successfully constructed a donor-acceptor thiophene-based polymer (PBT-1) by introducing an organoboron unit. The charge delocalization and lower LUMO energy level due to the unique structure enabled good performance in electrochemical tests with a reversible capacity of 405 mA h g-1 at 0.5 A g-1 and over 10 000 cycles at 1 A g-1. Moreover, electron paramagnetic resonance (EPR) spectra revealed that the unique stable spin system in the PBT-1 backbone during cycling provides a fundamental explanation for the highly stable electrochemical performance. This work offers a reliable reference for the design of organic anode materials and expands the potential application directions of organoboron chemistry.

Organoboron flank-substituted donor-acceptor polymer anode with ultra-long cycling stability for lithium ion batteries

The tunable structure and other properties of organic materials suggest that they can potentially solve the shortcomings of traditional anodes such as graphite. We successfully introduced an organoboron unit into the thiophene-based polymer PBT-2 to construct a donor-acceptor polymer anode. The charge delocalization and LUMO energy level resulting from the unique structure of this material enabled good redox activity and a very stable electrochemical performance in electrochemical tests, with a reversible capacity of 262 mA h g-1 at 0.5 A g-1 and >10 000 cycles at 1 A g-1 with a decay of 0.056‰ per cycle. Accordingly, targeted structural design to overcome the shortcomings of active units such as thiophene can effectively regulate their electrochemical performance, providing a solution for the development of high-performance anode materials for use in lithium ion batteries.

Aqueous Organic Batteries Using the Proton as a Charge Carrier

Benefiting from the merits of low cost, nonflammability, and high operational safety, aqueous rechargeable batteries have emerged as promising candidates for large-scale energy-storage applications. Among various metal-ion/non-metallic charge carriers, the proton (H+ ) as a charge carrier possesses numerous unique properties such as fast proton diffusion dynamics, a low molar mass, and a small hydrated ion radius, which endow aqueous proton batteries (APBs) with a salient rate capability, a long-term life span, and an excellent low-temperature electrochemical performance. In addition, redox-active organic molecules, with the advantages of structural diversity, rich proton-storage sites, and abundant resources, are considered attractive electrode materials for APBs. However, the charge-storage and transport mechanisms of organic electrodes in APBs are still in their infancy. Therefore, finding suitable electrode materials and uncovering the H+ -storage mechanisms are significant for the application of organic materials in APBs. Herein, the latest research progress on organic materials, such as small molecules and polymers for APBs, is reviewed. Furthermore, a comprehensive summary and evaluation of APBs employing organic electrodes as anode and/or cathode is provided, especially regarding their low-temperature and high-power performances, along with systematic discussions for guiding the rational design and the construction of APBs based on organic electrodes.

Carbonyl-Based Redox-Active Compounds as Organic Electrodes for Batteries: Escape from Middle-High Redox Potentials and Further Improvement?

Extracting─from the vast space of organic compounds─the best electrode candidates for achieving energy material breakthrough requires the identification of the microscopic causes and origins of various macroscopic features, including notably electrochemical and conduction properties. As a first guess of their capabilities, molecular DFT calculations and quantum theory of atoms in molecules (QTAIM)-derived indicators were applied to explore the family of pyrano[3,2-b]pyran-2,6-dione (PPD, i.e., A0) compounds, expanded to A0 fused with various kinds of rings (benzene, fluorinated benzene, thiophene, and merged thiophene/benzene). A glimpse of up-to-now elusive key incidences of introducing oxygen in vicinity to the carbonyl redox center within 6MRs─as embedded in the A0 core central unit common to all A-type compounds─has been gained. Furthermore, the main driving force toward achieving modulated low redox potential/band gaps thanks to fusing the aromatic rings for the A compound series was discovered.

Organic Anode Materials for Lithium-Ion Batteries: Recent Progress and Challenges

In the search for novel anode materials for lithium-ion batteries (LIBs), organic electrode materials have recently attracted substantial attention and seem to be the next preferred candidates for use as high-performance anode materials in rechargeable LIBs due to their low cost, high theoretical capacity, structural diversity, environmental friendliness, and facile synthesis. Up to now, the electrochemical properties of numerous organic compounds with different functional groups (carbonyl, azo, sulfur, imine, etc.) have been thoroughly explored as anode materials for LIBs, dividing organic anode materials into four main classes: organic carbonyl compounds, covalent organic frameworks (COFs), metal-organic frameworks (MOFs), and organic compounds with nitrogen-containing groups. In this review, an overview of the recent progress in organic anodes is provided. The electrochemical performances of different organic anode materials are compared, revealing the advantages and disadvantages of each class of organic materials in both research and commercial applications. Afterward, the practical applications of some organic anode materials in full cells of LIBs are provided. Finally, some techniques to address significant issues, such as poor electronic conductivity, low discharge voltage, and undesired dissolution of active organic anode material into typical organic electrolytes, are discussed. This paper will guide the study of more efficient organic compounds that can be employed as high-performance anode materials in LIBs.

Novel C3N4-Assisted Bilateral Interface Engineering for Efficient and Stable Perovskite Solar Cells

g-C₃N₄-assisted interface engineering has been developed as an effective method to improve the efficiency and stability of perovskite solar cells (PSCs). However, most of the reported works used g-C₃N₄-induced single-interface modification, which is difficult to passivate the bilateral interfaces of the perovskite layer at the same time. In this paper, we fabricated two kinds of C₃N₄ materials simultaneously (w-CN and y-CN) after the twice calcination of melamine and used them in the bilateral interface modification toward all-inorganic PSCs. The two kinds of C₃N₄ play different roles in different interface engineering. On the front interface, w-CN could optimize band level arrangement and improve the perovskite film quality, which contributes to the efficiency of the device. On the back interface, y-CN could also improve the film quality of the perovskite layer, accelerating the extraction of charge carriers. The champion efficiency of the CsPbIBr₂-based device treated by the bilateral interface is significantly enhanced from 7.8 to 10.1%. Moreover, the modified perovskite film exhibits negligible degradation after 40 min of exposure in the ambient environment with a relative humidity of 70%, while the pristine perovskite film has a rapid degradation within 20 min.

Metallic B2C3P Monolayer as Li-Ion Battery Materials: A First-Principles Study

The search for and design of high-performance electrode materials is always an important topic in rechargeable batteries. Using a global structure prediction method together with first-principles calculations, a free-standing two-dimensional B2C3P monolayer with honeycomb structure was identified. The stability of the B2C3P monolayer was confirmed by cohesive energy, phonon curves, and ab initio molecular dynamics calculations. Of note, the B2C3P monolayer was demonstrated to be metallic, which shows excellent performance for Li-ion batteries. For example, the B2C3P monolayer also exhibited a metallic characteristic after Li adsorption, therefore the ability to keep good electrical conductivity during battery operation. Furthermore, when a B2C3P monolayer is used as a lithium-ion battery anode, it shows an ultra-high theoretical capacity of 3024 mAh/g, and a comparatively low diffusion barrier of 0.33 eV. All calculated results showed that the B2C3P monolayer is an appealing anode material, and has great potential in energy storage devices.