Cyclo-?-peptides: Structure and tubular stacking of cyclic tetramers of 3-aminobutanoic acid as determined from powder diffraction data

Exploring Macroscopic Dipoles of Designed Cyclic Peptide Ordered Assemblies to Harvest Piezoelectric Properties

Crystalline materials exhibiting non-centrosymmetry and possessing substantial surface dipole moments play a critical role in piezoelectricity. Designing biocompatible self-assembled materials with these attributes is particularly challenging when compared to inorganic materials and ceramics. In this study, we elucidate the crystal conformations of novel cyclic peptides that exhibit self-assembly into tubular structures characterized by unidirectional hydrogen bonding and piezoelectric properties. Unlike cyclic peptides derived from alternating L- and D-amino acids, those derived from new δ-amino acids demonstrate the formation of self-assembled tubes with unidirectional hydrogen bonds. Further, the tightly packed tubular assemblies and higher macrodipole moments result in superior piezoelectric coefficients compared to peptides with lower macrodipole moments. Our findings underscore the potential for designing cyclic peptides with unidirectional hydrogen bonds, thereby paving the way for their application in design of biocompatible piezo- and ferroelectric materials.

Supramolecular Channels Assembled within Intercellular Gaps

Tubular structures exist broadly in biological systems and exhibit important functions including mediating cellular communications. The construction of artificial analogues in living cells would provide a new strategy for chemotherapy. In this report, a kind of supramolecular channel has been constructed within intercellular gaps by mimicking the assembly process and structure of natural gap junctional channels, which consist of hydrophobic tubular modules located in the adjacent cell membranes and hydrophilic modules within the extracellular space. The assembly of the channels was driven by electrostatic interactions. The channels could inhibit tumor cell invasion by preventing cell migration.

Molecular Self-Assembly and Supramolecular Chemistry of Cyclic Peptides

This Review focuses on the establishment and development of self-assemblies governed by the supramolecular interactions between cyclic peptides. The Review first describes the type of cyclic peptides able to assemble into tubular structures to form supramolecular cyclic peptide nanotubes. A range of cyclic peptides have been identified to have such properties, including α-peptides, β-peptides, α,γ-peptides, and peptides based on δ- and ε-amino acids. The Review covers the design and functionalization of these cyclic peptides and expands to a recent advance in the design and application of these materials through their conjugation to polymer chains to generate cyclic peptide-polymer conjugates nanostructures. The Review, then, concentrates on the challenges in characterizing these systems and presents an overview of the various analytical and characterization techniques used to date. This overview concludes with a critical survey of the various applications of the nanomaterials obtained from supramolecular cyclic peptide nanotubes, with a focus on biological and medical applications, ranging from ion channels and membrane insertion to antibacterial materials, anticancer drug delivery, gene delivery, and antiviral applications.

Molecular Plumbing to Bend Self-Assembling Peptide Nanotubes

Light-induced molecular piping of cyclic peptide nanotubes to form bent tubular structures is described. The process is based on the [4+4] photocycloaddition of anthracene moieties, whose structural changes derived from the interdigitated flat disposition of precursors to the corresponding cycloadduct moieties, induced the geometrical modifications in nanotubes packing that provokes their curvature. For this purpose, we designed a new class of cyclic peptide nanotubes formed by β- and α-amino acids. The presence of the former predisposes the peptide to stack in a parallel fashion with the β-residues aligned along the nanotube and the homogeneous distribution of anthracene pendants.

Transmembrane Self-Assembled Cyclic Peptide Nanotubes Based on α-Residues and Cyclic δ-Amino Acids: A Computational Study

Self-assembling cyclic peptide nanotubes have been shown to function as synthetic, integral transmembrane channels. The combination of natural and nonnatural aminoacids in the sequence of cyclic peptides enables the control not only of their outer surface but also of the inner cavity behavior and properties, affecting, for instance, their permeability to different molecules including water and ions. Here, a thorough computational study on a new class of self-assembling peptide motifs, in which δ-aminocycloalkanecarboxylic acids are alternated with natural α-amino acids, is presented. The presence of synthetic δ-residues creates hydrophobic regions in these α,δ-SCPNs, which makes them especially attractive for their potential implementation in the design of new drug or diagnostic agent carrier systems. Using molecular dynamics simulations, the behavior of water molecules, different ions (Li+, Na+, K+, Cs+, and Ca2+), and their correspondent counter Cl- anions is extensively investigated in the nanoconfined environment. The structure and dynamics are mutually combined in a diving immersion inside these transmembrane channels to discover a fascinating submarine nanoworld where star-shaped water channels guide the passage of cations and anions therethrough.

Effect of Water Models on Transmembrane Self-Assembled Cyclic Peptide Nanotubes

Self-assembling cyclic peptide nanotubes can form nanopores when they are inserted in lipid bilayers, acting as ion and/or water permeable channels. In order to improve the versatility of these systems, it is possible to specifically design cyclic peptides with a combination of natural and non-natural amino acids, enabling the control of the nature of the inner cavity of the channels. Here, the behavior of two types of self-assembling peptide motifs, alternating α-amino acids with γ- or δ-aminocycloalkanecarboxylic acids, is studied via molecular dynamics (MD) simulations. The behavior of water molecules in nanopores is expected to affect the properties of these channels and therefore merits detailed examination. A number of water models commonly used in MD simulations have been validated by how well they reproduce bulk water properties. However, it is less clear how these water models behave in the nanoconfined condition inside a channel. The behavior of four different water models-TIP3P, TIP4P, TIP4P/2005, and OPC-are evaluated in MD simulations of self-assembled cyclic peptide nanotubes of distinct composition and diameter. The dynamic behavior of the water molecules and ions in these designed artificial channels depends subtly on the water model used. TIP3P water molecules move faster than those of TIP4P, TIP4P/2005, and OPC. This demeanor is clearly observed in the filling of the nanotube, in water diffusion within the pore, and in the number and stability of hydrogen bonds of the peptides with water. It was also shown that the water model influences the simulated ion flux through the nanotubes, with TIP3P producing the greatest ion flux. Additionally, the two more recent models, TIP4P/2005 and OPC, which are known to reproduce the experimental self-diffusion coefficient of bulk water quite well, exhibit very similar results under the nanoconfined conditions studied here. Because none of these models have been parametrized specifically for waters confined in peptide nanotubes, this study provides a point of reference for further validation.

New perspectives in macromolecular powder diffraction using single-photon-counting strip detectors: high-resolution structure of the pharmaceutical peptide octreotide

Advances in instrumentation, as well as the development of powerful crystallographic software have significantly facilitated the collection of high-resolution diffraction data and have made X-ray powder diffraction (XRPD) particularly useful for the extraction of structural information; this is true even for complex molecules, especially when combined with synchrotron radiation. In this study, in-line with past instrumental profile studies, an improved data collection strategy exploiting the MYTHEN II detector system together with significant beam focusing and tailored data collection options was introduced and optimized for protein samples at the Material Science beamline at the Swiss Light Source. Polycrystalline precipitates of octreotide, a somatostatin analog of particular pharmaceutical interest, were examined with this novel approach. XRPD experiments resulted in high angular and d-spacing (1.87 Å) resolution data, from which electron-density maps of enhanced quality were extracted, revealing the molecule's structural properties. Since microcrystalline precipitates represent a viable alternative for administration of therapeutic macromolecules, XRPD has been acknowledged as the most applicable tool for examining a wide spectrum of physicochemical properties of such materials and performing studies ranging from phase identification to complete structural characterization.

Hierarchy of π-stacking determines the conformational preferences of bis-squaramates

Orientation of squaramate dimers in crystal structures is tuned by varying the degree of cooperativity between hydrogen bonding and π-stacking.

Strategies for Fine-Tuning the Conformations of Cyclic Peptides

Cyclic peptides are promising scaffolds for drug development, attributable in part to their increased conformational order compared to linear peptides. However, when optimizing the target-binding or pharmacokinetic properties of cyclic peptides, it is frequently necessary to "fine-tune" their conformations, e.g., by imposing greater rigidity, by subtly altering certain side chain vectors, or by adjusting the global shape of the macrocycle. This review systematically examines the various types of structural modifications that can be made to cyclic peptides in order to achieve such conformational control.

Parallel Versus Antiparallel β-Sheet Structure in Cyclic Peptide Hybrids Containing γ- or δ-Cyclic Amino Acids

Cyclic peptides with disc-shaped structures have emerged as potent building blocks for the preparation of new biomaterials in fields ranging from biological to material science. In this work, we analyze in depth the self-assembling properties of a new type of cyclic peptides based on the alternation of α-residues and cyclic δ-amino acids (α,δ-CPs). To examine the preferred stacking properties adopted by cyclic peptides bearing this type of amino acids, we carried out a synergistic in vitro/in silico approximation by using simple dimeric models and then extended to nanotubes. Although these new cyclic peptides (α,δ-CPs) can interact either in a parallel or antiparallel fashion, our results confirm that although the parallel β-sheet is more stable, it can be switched to the antiparallel stacking by choosing residues that can establish favorable cross-strand interactions. Moreover, the subsequent comparison by using the same methodology but applied to α,γ-CPs models, up to the moment assumed as antiparallel-like d,l-α-CPs, led to unforeseen conclusions that put into question preliminary conjectures about these systems. Surprisingly, they tend to adopt a parallel β-sheet directed by the skeleton interactions. These results imply a change of paradigm with respect to cyclic peptide designs that should be considered for dimers and nanotubes.

Cyclic Tetrapeptides from Nature and Design: A Review of Synthetic Methodologies, Structure, and Function

Small cyclic peptides possess a wide range of biological properties and unique structures that make them attractive to scientists working in a range of areas from medicinal to materials chemistry. However, cyclic tetrapeptides (CTPs), which are important members of this family, are notoriously difficult to synthesize. Various synthetic methodologies have been developed that enable access to natural product CTPs and their rationally designed synthetic analogues having novel molecular structures. These methodologies include the use of reversible protecting groups such as pseudoprolines that restrict conformational freedom, ring contraction strategies, on-resin cyclization approaches, and optimization of coupling reagents and reaction conditions such as temperature and dilution factors. Several fundamental studies have documented the impacts of amino acid configurations, N-alkylation, and steric bulk on both synthetic success and ensuing conformations. Carefully executed retrosynthetic ring dissection and the unique structural features of the linear precursor sequences that result from the ring dissection are crucial for the success of the cyclization step. Other factors that influence the outcome of the cyclization step include reaction temperature, solvent, reagents used as well as dilution levels. The purpose of this review is to highlight the current state of affairs on naturally occurring and rationally designed cyclic tetrapeptides, including strategies investigated for their syntheses in the literature, the conformations adopted by these molecules, and specific examples of their function. Using selected examples from the literature, an in-depth discussion of the synthetic techniques and reaction parameters applied for the successful syntheses of 12-, 13-, and 14-membered natural product CTPs and their novel analogues are presented, with particular focus on the cyclization step. Selected examples of the three-dimensional structures of cyclic tetrapeptides studied by NMR, and X-ray crystallography are also included.

DL-3-Aminoisobutyric acid: vibrational, NBO and AIM analysis of N-H⋯O bonded-zwitterionic dimer model

A zwitterionic dimer model constructed of inter-molecular -N-H⋯O bonding has been proposed for the solid sample of DL-3-Aminoisobutyric acid consistent with IR absorption and Raman spectral features measured in the 3500-400/50 cm^-1. This zwitterionic dimer model in water as solvent has been computed at B3LYP/6-311++G(d,p) and B3LYP-D3/6-311++G(d,p) levels including Grimme's dispersion correction associated with the -N-H⋯O interaction and SCRF-SMD method. Of the several possible monomer and dimer conformational structures, the most stable dimer constructed of two zwitterion monomer units has produced vibrational modes due to the -NH₃ ⁺ cation and -CO₂‾ anion involved in the -N-H⋯O bonding in fair agreement with the observed broad but composite IR modal features near the 3500-2000 cm^-1. Except for the frequency of asymmetric stretching mode of the -NH₃ ⁺ cation, its symmetric and bending modes agree with the observed values. As for the -CO₂‾ anion, the frequencies of all of its modes are in good agreement with the experiment. Natural bond orbital (NBO), molecular electrostatic potential (MEP), atoms-in-molecules (AIM) and non-covalent interaction (NCI) analyses have been used to understand electronic characterization of the -N-H⋯O bonding.

Characterization of New Cyclic D,L-α-Alternate Amino Acid Peptides by Capillary Electrophoresis Coupled to Electrospray Ionization Mass Spectrometry

The self-assembly of peptide nanotubes (PNTs) depends on the structure and chemistry of cyclic peptide (CP) monomers, impacting on their properties, which makes the choice of their monomers and their characterization a high challenge. For this purpose, we developed for the first time a capillary electrophoresis coupled to electrospray ionization mass spectrometry (CE-ESI-MS) methodology and characterized a set of eight original CP sequences of 8, 10, and 12 D,L-α-alternate amino acids with a controlled internal diameter (from 7 to 13 Å) and various properties (diameter, global surface charge, hydrophobicity). This new CE-ESI-MS methodology allows verifying the structure, the purity, as well as the stability (when stored during several months) of interesting potential precursors for PNTs that could be employed as nanoplatforms in diagnostics or pseudo sieving tools for separation purposes.

New self-assembling peptide nanotubes of large diameter using δ-amino acids

Here we show that 4-aminocyclohexanecarboxylic acid is a rigid stretcher building block for the preparation of cyclic peptides that self-assemble to form peptide nanotubes with large diameter and hydrophobic pores. The hydrophobic properties of the resulting nanotubes provided by the two methylene groups per δ-residue allow the encapsulation of C60 moieties forming a new type of bionanopeapod structure.

Applications of cyclic peptide nanotubes (cPNTs)

Self-assembled cyclic peptide nanotubes (cPNTs) have recently drawn particular attention as one of the most intriguing nanostructures in the field of nanotechnology. Given their unique features including high surface area, increased drug loading, environmental stability, enhanced permeation, and modifiable drug release, these hollow tubular structures can be constructed with cyclic di-, tri-, tetra-, hexa-, octa-, and decapeptides with various amino acid sequences, enantiomers, and functionalized side chains and can be applied for antiviral and antibacterial drugs, drug delivery and gene delivery vectors, organic electronic devices, and ionic or molecular channels. Recent publications have presented promising results regarding the use of cPNTs as drugs or biomedical devices. However, there is an urgent need for the further in vivo nanotoxicity and safety testing of these nanotubes to evaluate their suitability in different fields.

Two one-dimensional arrays of naphthyl and anthryl groups along peptide nanotubes prepared from cyclic peptides comprising α- and β-amino acids

A novel cyclic hexapeptide composed of l-α-naphthylalanine, d-α-anthrylalanine, and four β-alanines (CP6) is synthesized and its molecular assembly into peptide nanotubes (PNTs) and the electronic properties arising from one-dimensional arrays of aromatic groups along the PNTs were investigated. CP6 with a combination of l- and d-α-amino acids is designed to self-assemble into PNTs with them stacking on top of each other under the constraint of maximizing the number of intermolecular hydrogen bonds between the cyclic peptides. Upon PNT formation, the respective side chains of l- and d-α-amino acids are aligned in line along the PNTs. The topological arrangement of the anthryl groups being in close proximity in the CP6 PNT is supported by higher photo-excited energy transfer, appearance of the induced Cotton effects, and the promoted photo-dimerization reaction upon PNT formation. AFM observations reveal that PNT bundles with diameters 5-15 nm are dielectric microcrystals having a piezoelectric coefficient of 2-6 pC N-1. Kelvin force microscopy observations show the generation of surface potentials over 100 mV owing to the one-dimensional array of the anthryl groups along PNTs. Incorporation of α-amino acids with opposite chirality into cyclic β-peptides is therefore an effective molecular design for the nano-architecture of PNTs displaying one-dimensional arrays of chromophores along PNTs.

Recent advances in controlling the internal and external properties of self-assembling cyclic peptide nanotubes and dimers

Tuning the internal and external properties of self-assembling cyclic peptide nanotubes.

Spontaneous Self-Assembly of Fully Protected Ester 1:1 [α/α-Nα-Bn-hydrazino] Pseudodipeptides into a Twisted Parallel β-Sheet in the Crystal State

Previous studies have demonstrated that amidic α/β-pseudodipeptides, 1:1 [α/α-N^α-Bn-hydrazino], have the ability to fold via a succession of γ-turn (C₇ pseudocycle) and hydrazinoturn in CDCl₃ solution, their amide terminals enabling the formation of an intramolecular H-bond network. Despite their lack of a primary amide terminals allowing the formation of the hydrazinoturn, their ester counterparts 1-4 were proven to self-assemble into C₆ and C₇ pseudocycles by intramolecular H-bonds in solution state and into an uncommon twisted parallel β-sheet through intermolecular H-bonding in the crystal state to form a supramolecular helix, with eight molecules needed to complete a full 360° rotation. Such self-organization (with eight molecules) has only been observed in a specific α/α-pseudodipeptide, depsipeptide (Boc-Leu-Lac-OEt). Relying on IR absorption, NMR, X-ray diffraction, and CD analyses, the aim of this study was to demonstrate that stereoisomers of ester 1:1 [α/α-N^α-Bn-hydrazino] pseudodipeptides 1-4 are able to self-assemble into this β-helical structure. The absolute configuration of the asymmetric C^α-atom of the α-amino acid residue influences the left- or right-handed twist without changing the pitch of the formed helix.

Design, synthesis, and characterization of new cyclic d,l-α-alternate amino acid peptides by capillary electrophoresis coupled to electrospray ionization mass spectrometry

The self-assembly of peptide nanotubes (PNTs) depends on the structure and chemistry of cyclic peptide (CP) monomers, having an impact on their properties, making the choice of their monomers and their characterization a great challenge. We synthesized for the first time a new set of eight original CP sequences of 8, 10, and 12 d,l-α-alternate amino acids with a controlled internal diameter from 7 to 13 Å. They present various properties (e.g., diameter, global surface charge, hydrophobicity) that can open the way to new applications. Their structure and purity were determined thanks to a capillary electrophoresis coupled to electrospray ionization mass spectrometry (CE-ESI-MS) methodology developed for the first time for this purpose. The CPs were successfully separated in a basic hydro-organic background electrolyte (BGE, pH 8.0, H2O/EtOH 50:50, v/v) and analyzed in MS positive mode. The effect of CP structure on electrophoretic mobility was studied, and the mass spectra were deeply analyzed. This methodology allowed verifying their purity and the absence of linear peptide precursors as well as their stability when stored over several months. Therefore, we have developed a new CE-ESI-MS methodology for the structure and purity control of interesting potential precursors for PNTs that could be employed as nanoplatforms in diagnostics or as pseudo sieving tools for separative purposes.

Extremely strong tubular stacking of aromatic oligoamide macrocycles

As the third-generation rigid macrocycles evolved from progenitor 1, cyclic aromatic oligoamides 3, with a backbone of reduced constraint, exhibit extremely strong stacking with an astoundingly high affinity (estimated lower limit of Kdimer > 1013 M-1 in CHCl3), which leads to dispersed tubular stacks that undergo further assembly in solution. Computational study reveals a very large binding energy (-49.77 kcal mol-1) and indicates highly cooperative local dipole interactions that account for the observed strength and directionality for the stacking of 3. In the solid-state, X-ray diffraction (XRD) confirms that the aggregation of 3 results in well-aligned tubular stacks. The persistent tubular assemblies of 3, with their non-deformable sub-nm pore, are expected to possess many interesting functions. One such function, transmembrane ion transport, is observed for 3.

A combined molecular dynamic and quantum mechanic study of the solvent and guest molecule effect on the stability and length of heterocyclic peptide nanotubes

Guest molecules and solvents affect the stability and length of the heterocyclic peptide nanotube through the electrostatic interactions.

The synthesis of head-to-tail cyclic sulfono-γ-AApeptides

Head-to-tail cyclic sulfono-γ-AApeptides.

Solving the structures of light-atom compounds with powder charge flipping

While the powder charge flipping (pCF) algorithm has been applied successfully to a variety of inorganic compounds, reports on its application to organic structures, in particular those consisting of light atoms only, are rare. To investigate the reason for this apparent incongruity, a series of light-atom structures were tested using the pCF algorithm implemented in the programSuperflip. The data sets, which covered varying degrees of reflection overlap, had resolutions of approximately 1 Å, and the structures ranged from 40 to 136 atoms per unit cell. Both centrosymmetric and noncentrosymmetric structures were investigated. A modified pCF approach, which was developed in a separate study, was tested on several compounds whose structures could not be solved by applying the basic pCF algorithm inSuperflip. The results show that organic structures with no heavy atoms and low symmetry do indeed test the limits of the pCF algorithm inSuperflip. The study has allowed a few guidelines for approaching such problems to be formulated.

Self-assembling organic nanotubes with precisely defined, sub-nanometer pores: formation and mass transport characteristics

The transport of molecules and ions across nanometer-scaled pores, created by natural or artificial molecules, is a phenomenon of both fundamental and practical significance. Biological channels are the most remarkable examples of mass transport across membranes and demonstrate nearly exclusive selectivity and high efficiency with a diverse collection of molecules. These channels are critical for many basic biological functions, such as membrane potential, signal transduction, and osmotic homeostasis. If such highly specific and efficient mass transport or separation could be achieved with artificial nanostructures under controlled conditions, they could create revolutionary technologies in a variety of areas. For this reason, investigators from diverse disciplines have vigorously studied small nondeformable nanopores. The most exciting studies have focused on carbon nanotubes (CNTs), which have exhibited fast mass transport and high ion selectivity despite their very simple structure. However, the limitations of CNTs and the dearth of other small (≤2 nm) nanopores have severely hampered the systematic investigation of nanopore-mediated mass transport, which will be essential for designing artificial nanopores with desired functions en masse. Researchers can overcome the difficulties associated with CNT and other artificial pores by stacking macrocyclic building blocks with persistent shapes to construct tunable, self-assembling organic pores. This effort started when we discovered a highly efficient, one-pot macrocyclization process to efficiently prepare several classes of macrocycles with rigid backbones containing nondeformable cavities. Such macrocycles, if stacked atop one another, should lead to nanotubular assemblies with defined inner pores determined by their constituent macrocycles. One class of macrocycles with aromatic oligoamide backbones had a very high propensity for directional assembly, forming nanotubular structures containing nanometer and sub-nanometer hydrophilic pores. These self-assembling hydrophilic pores can form ion channels in lipid membranes with very large ion conductances. To control the assembly, we have further introduced multiple hydrogen-bonding side chains to enforce the stacking of rigid macrocycles into self-assembling nanotubes. This strategy has produced a self-assembling, sub-nanometer hydrophobic pore that not only acted as a transmembrane channel with surprisingly high ion selectivity, but also mediated a significant transmembrane water flux. The stacking of rigid macrocycles that can be chemically modified in either the lumen or the exterior surface can produce self-assembling organic nanotubes with inner pores of defined sizes. The combination of our approach with the availability and synthetic tunability of various rigid macrocycles should produce a variety of organic nanopores. Such structures would allow researchers to systematically explore mass transport in the sub-nanometer regime. Further advances should lead to novel applications such as biosensing, materials separation, and molecular purifications.