LithiumOxygen Electrochemistry in Non-Aqueous Solutions

Unraveling the solvent stability on the cathode surface of Li-O2 batteries by using in situ vibrational spectroscopies

In aprotic lithium-oxygen (Li-O2) batteries, solvent properties are crucial in the charge/discharge processes. Therefore, a thorough understanding of the solvent stability at the cathode surface during the oxygen reduction/evolution reactions (ORR/OER) is essential for the rational design of high-performance electrolytes. In this study, the stability of typical solvents, a series of glyme solvents with different chain lengths, has been investigated during the ORR/OER by in situ vibrational spectroscopy measurements of sum frequency generation (SFG) spectroscopy and infrared reflection absorption spectroscopy (IRRAS). The structural evolution and decomposition mechanism of the solvents during ORR/OER have been discussed based on the observations. Our results demonstrate that superoxide (O2-) generated during the ORR plays a critical role in the stability of the solvents.

Effects of Atmospheric Gases on Li Metal Cyclability and Solid-Electrolyte Interphase Formation

For Li-air batteries, dissolved gas can cross over from the air electrode to the Li metal anode and affect the solid-electrolyte interphase (SEI) formation, a phenomenon that has not been fully characterized. In this work, the impact of atmospheric gases on the SEI properties is studied using electrochemical methods and ex situ characterization techniques, including X-ray photoelectron spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. The presence of O₂ significantly improved the lithium cyclability; less lithium is consumed to form the SEI or is lost because of electrical disconnects. However, the SEI resistivity and plating overpotentials increased. Lithium cycled in an "air-like" mixed O₂/N₂ environment also demonstrated improved cycling efficiency, suggesting that dissolved O₂ participates in electrolyte reduction, forming a homogeneous SEI, even at low concentrations. The impact of gas environments on Li metal plating and SEI formation represents an additional parameter in designing future Li-metal batteries.

Lithium-Oxygen Batteries and Related Systems: Potential, Status, and Future

The goal of limiting global warming to 1.5 °C requires a drastic reduction in CO₂ emissions across many sectors of the world economy. Batteries are vital to this endeavor, whether used in electric vehicles, to store renewable electricity, or in aviation. Present lithium-ion technologies are preparing the public for this inevitable change, but their maximum theoretical specific capacity presents a limitation. Their high cost is another concern for commercial viability. Metal-air batteries have the highest theoretical energy density of all possible secondary battery technologies and could yield step changes in energy storage, if their practical difficulties could be overcome. The scope of this review is to provide an objective, comprehensive, and authoritative assessment of the intensive work invested in nonaqueous rechargeable metal-air batteries over the past few years, which identified the key problems and guides directions to solve them. We focus primarily on the challenges and outlook for Li-O₂ cells but include Na-O₂, K-O₂, and Mg-O₂ cells for comparison. Our review highlights the interdisciplinary nature of this field that involves a combination of materials chemistry, electrochemistry, computation, microscopy, spectroscopy, and surface science. The mechanisms of O₂ reduction and evolution are considered in the light of recent findings, along with developments in positive and negative electrodes, electrolytes, electrocatalysis on surfaces and in solution, and the degradative effect of singlet oxygen, which is typically formed in Li-O₂ cells.

Inhibition of Discharge Side Reactions by Promoting Solution-Mediated Oxygen Reduction Reaction with Stable Quinone in Li-O2 Batteries

Aprotic lithium-oxygen (Li-O₂) batteries with an ultrahigh theoretical energy density have great potential in rechargeable power supply, while their application still faces several challenges, especially poor cycle stability. To solve the problems, one of the effective strategies is to inhibit the generation of the LiO₂ intermediate produced via a surface-mediated oxygen reduction reaction (ORR) pathway, which is an important species inducing byproduct generation and low cell cyclic stability. Herein, a series of quinones and solid materials serve as the solution-mediated and surface-mediated ORR catalysts, and it was found that the generation of LiO₂ and byproducts from solid catalysts was inhibited by quinones. Among the studied quinones, benzo[1,2-b:4,5-b']dithiophene-4,8-dione, a quinone molecule with the advantage of a highly symmetrical planar and conjugated structure and without α-H, exhibits high redox potential, diffusion coefficient, and electrochemical stability, and consequently the best ORR activities and the capability to inhibit byproduct generation. It indicated that the increase of the solution-mediated ORR pathway plays an important role in restraining the discharging side reaction, substantially improving cell cycle stability and capacity. This study provides the theoretical and experimental basis for better understanding the ORR process of Li-O₂ batteries.

Adsorption, surface relaxation and electrolyte structure at Pt(111) electrodes in non-aqueous and aqueous acetonitrile electrolytes

Application of synchrotron X-ray scattering to probe the atomic structure of the interface between Pt(111) electrodes and non-aqueous acetonitrile electrolytes.

A high-energy-density lithium-oxygen battery based on a reversible four-electron conversion to lithium oxide

Lithium-oxygen (Li-O2) batteries have attracted much attention owing to the high theoretical energy density afforded by the two-electron reduction of O2 to lithium peroxide (Li2O2). We report an inorganic-electrolyte Li-O2 cell that cycles at an elevated temperature via highly reversible four-electron redox to form crystalline lithium oxide (Li2O). It relies on a bifunctional metal oxide host that catalyzes O–O bond cleavage on discharge, yielding a high capacity of 11 milliampere-hours per square centimeter, and O2 evolution on charge with very low overpotential. Online mass spectrometry and chemical quantification confirm that oxidation of Li2O involves transfer of exactly 4 e–/O2. This work shows that Li-O2 electrochemistry is not intrinsically limited once problems of electrolyte, superoxide, and cathode host are overcome and that coulombic efficiency close to 100% can be achieved.

The Effect of Water on Quinone Redox Mediators in Nonaqueous Li-O2 Batteries

The parasitic reactions associated with reduced oxygen species and the difficulty in achieving the high theoretical capacity have been major issues plaguing development of practical nonaqueous Li-O₂ batteries. We hereby address the above issues by exploring the synergistic effect of 2,5-di-tert-butyl-1,4-benzoquinone and H₂O on the oxygen chemistry in a nonaqueous Li-O₂ battery. Water stabilizes the quinone monoanion and dianion, shifting the reduction potentials of the quinone and monoanion to more positive values (vs Li/Li⁺). When water and the quinone are used together in a (largely) nonaqueous Li-O₂ battery, the cell discharge operates via a two-electron oxygen reduction reaction to form Li₂O₂, with the battery discharge voltage, rate, and capacity all being considerably increased and fewer side reactions being detected. Li₂O₂ crystals can grow up to 30 μm, more than an order of magnitude larger than cases with the quinone alone or without any additives, suggesting that water is essential to promoting a solution dominated process with the quinone on discharging. The catalytic reduction of O₂ by the quinone monoanion is predominantly responsible for the attractive features mentioned above. Water stabilizes the quinone monoanion via hydrogen-bond formation and by coordination of the Li⁺ ions, and it also helps increase the solvation, concentration, lifetime, and diffusion length of reduced oxygen species that dictate the discharge voltage, rate, and capacity of the battery. When a redox mediator is also used to aid the charging process, a high-power, high energy density, rechargeable Li-O₂ battery is obtained.

Room temperature ionic liquids versus organic solvents as lithium–oxygen battery electrolytes

Correlation between the physicochemical properties of ionic liquid-based electrolytes and lithium–oxygen battery performance.

Understanding LiOH Chemistry in a Ruthenium-Catalyzed Li-O2 Battery

Non-aqueous Li-O₂ batteries are promising for next-generation energy storage. New battery chemistries based on LiOH, rather than Li₂ O₂ , have been recently reported in systems with added water, one using a soluble additive LiI and the other using solid Ru catalysts. Here, the focus is on the mechanism of Ru-catalyzed LiOH chemistry. Using nuclear magnetic resonance, operando electrochemical pressure measurements, and mass spectrometry, it is shown that on discharging LiOH forms via a 4 e^- oxygen reduction reaction, the H in LiOH coming solely from added H₂ O and the O from both O₂ and H₂ O. On charging, quantitative LiOH oxidation occurs at 3.1 V, with O being trapped in a form of dimethyl sulfone in the electrolyte. Compared to Li₂ O₂ , LiOH formation over Ru incurs few side reactions, a critical advantage for developing a long-lived battery. An optimized metal-catalyst-electrolyte couple needs to be sought that aids LiOH oxidation and is stable towards attack by hydroxyl radicals.

Feasibility of Full (Li-Ion)-O2 Cells Comprised of Hard Carbon Anodes

Aprotic Li-O₂ battery is an exciting concept. The enormous theoretical energy density and cell assembly simplicity make this technology very appealing. Nevertheless, the instability of the cell components, such as cathode, anode, and electrolyte solution during cycling, does not allow this technology to be fully commercialized. One of the intrinsic challenges facing researchers is the use of lithium metal as an anode in Li-O₂ cells. The high activity toward chemical moieties and lack of control of the dissolution/deposition processes of lithium metal makes this anode material unreliable. The safety issues accompanied by these processes intimidate battery manufacturers. The need for a reliable anode is crucial. In this work we have examined the replacement of metallic lithium anode in Li-O₂ cells with lithiated hard carbon (HC) electrodes. HC anodes have many benefits that are suitable for oxygen reduction in the presence of solvated lithium cations. In contrast to lithium metal, the insertion of lithium cations into the carbon host is much more systematic and safe. In addition, with HC anodes we can use aprotic solvents such as glymes that are suitable for oxygen reduction applications. By contrast, lithium cations fail to intercalate reversibly into ordered carbon such as graphite and soft carbons using ethereal electrolyte solutions, due to detrimental co-intercalation of solvent molecules with Li ions into ordered carbon structures. The hard carbon electrodes were prelithiated prior to being used as anodes in the Li-O₂ rechargeable battery systems. Full cells containing diglyme based solutions and a monolithic carbon cathode were measured by various electrochemical methods. To identify the products and surface films that were formed during cells operation, both the cathodes and anodes were examined ex situ by XRD, FTIR, and electron microscopy. The HC anodes were found to be a suitable material for (Li-ion)-O₂ cell. Although there are still many challenges to tackle, this study offers a more practical direction for this promising battery technology and sets up a platform for further systematic optimization of its various components.

A Rechargeable Li-Air Fuel Cell Battery Based on Garnet Solid Electrolytes

Non-aqueous Li-air batteries have been intensively studied in the past few years for their theoretically super-high energy density. However, they cannot operate properly in real air because they contain highly unstable and volatile electrolytes. Here, we report the fabrication of solid-state Li-air batteries using garnet (i.e., Li_6.4La₃Zr_1.4Ta_0.6O₁₂, LLZTO) ceramic disks with high density and ionic conductivity as the electrolytes and composite cathodes consisting of garnet powder, Li salts (LiTFSI) and active carbon. These batteries run in real air based on the formation and decomposition at least partially of Li₂CO₃. Batteries with LiTFSI mixed with polyimide (PI:LiTFSI) as a binder show rechargeability at 200 °C with a specific capacity of 2184 mAh g⁻¹_carbon at 20 μA cm⁻². Replacement of PI:LiTFSI with LiTFSI dissolved in polypropylene carbonate (PPC:LiTFSI) reduces interfacial resistance, and the resulting batteries show a greatly increased discharge capacity of approximately 20300 mAh g⁻¹_carbon and cycle 50 times while maintaining a cutoff capacity of 1000 mAh g⁻¹_carbon at 20 μA cm⁻² and 80 °C. These results demonstrate that the use of LLZTO ceramic electrolytes enables operation of the Li-air battery in real air at medium temperatures, leading to a novel type of Li-air fuel cell battery for energy storage.

The importance of solvent selection in Li–O2 cells

Diglyme (G2) is the highly preferred solvent choice over other types of glymes for achieving longer cycling performance of Li–O₂ cells.

In operando X-ray diffraction of lithium–oxygen batteries using an ionic liquid as an electrolyte co-solvent

Chemical instability of ionic liquids in the presence of lithium metal leading to spontaneous LiOH formation.

Mechanistic Insights into the Challenges of Cycling a Nonaqueous Na-O2 Battery

Superoxide-based nonaqueous metal-oxygen batteries have received considerable research attention as they exhibit high energy densities and round-trip efficiencies. The cycling performance, however, is still poor. Here we study the cycling characteristic of a Na-O₂ battery using solid-state nuclear magnetic resonance, Raman spectroscopy, and scanning electron microscopy. We find that the poor cycling performance is primarily caused by the considerable side reactions stemming from the chemical aggressiveness of NaO₂ as both a solid-phase and dissolved species in the electrolyte. The side reaction products cover electrode surfaces and hinder electron transfer across the electrode-electrolyte interface, being a major reason for cell failure. In addition, the available electrode surface and porosity change considerably during cell discharging and charging, affecting the diffusion of soluble species (superoxide and water) and resulting in inhomogeneous reactions across the electrode. This study provides insights into the challenges associated with achieving long-lived superoxide-based metal-O₂ batteries.

Promoting solution phase discharge in Li-O2 batteries containing weakly solvating electrolyte solutions

On discharge, the Li-O2 battery can form a Li2O2 film on the cathode surface, leading to low capacities, low rates and early cell death, or it can form Li2O2 particles in solution, leading to high capacities at relatively high rates and avoiding early cell death. Achieving discharge in solution is important and may be encouraged by the use of high donor or acceptor number solvents or salts that dissolve the LiO2 intermediate involved in the formation of Li2O2. However, the characteristics that make high donor or acceptor number solvents good (for example, high polarity) result in them being unstable towards LiO2 or Li2O2. Here we demonstrate that introduction of the additive 2,5-di-tert-butyl-1,4-benzoquinone (DBBQ) promotes solution phase formation of Li2O2 in low-polarity and weakly solvating electrolyte solutions. Importantly, it does so while simultaneously suppressing direct reduction to Li2O2 on the cathode surface, which would otherwise lead to Li2O2 film growth and premature cell death. It also halves the overpotential during discharge, increases the capacity 80- to 100-fold and enables rates >1 mA cmareal(-2) for cathodes with capacities of >4 mAh cmareal(-2). The DBBQ additive operates by a new mechanism that avoids the reactive LiO2 intermediate in solution.

Catalytic Behavior of Lithium Nitrate in Li-O2 Cells

The development of a successful Li-O2 battery depends to a large extent on the discovery of electrolyte solutions that remain chemically stable through the reduction and oxidation reactions that occur during cell operations. The influence of the electrolyte anions on the behavior of Li-O2 cells was thought to be negligible. However, it has recently been suggested that specific anions can have a dramatic effect on the chemistry of a Li-O2 cell. In the present paper, we describe how LiNO3 in polyether solvents can improve both oxygen reduction (ORR) and oxygen evolution (OER) reactions. In particular, the nitrate anion can enhance the ORR by enabling a mechanism that involves solubilized species like superoxide radicals, which allows for the formation of submicronic Li2O2 particles. Such phenomena were also observed in Li-O2 cells with high donor number solvents, such as dimethyl sulfoxide dimethylformamide (DMF) and dimethylacetamide (DMA). Nevertheless, their instability toward oxygen reduction, lithium metals, and high oxidation potentials renders them less suitable than polyether solvents. In turn, using catalysts like LiI to reduce the OER overpotential might enhance parasitic reactions. We show herein that LiNO3 can serve as an electrolyte and useful redox mediator. NO2(-) ions are formed by the reduction of nitrate ions on the anode. Their oxidation forms NO2, which readily oxidizes to Li2O2. The latter process moves the OER overpotentials down into a potential window suitable for polyether solvent-based cells. Advanced analytical tools, including in situ electrochemical quartz microbalance (EQCM) and ESR plus XPS, HR-SEM, and impedance spectroscopy, were used for the studies reported herein.