Room Temperature Ionic Liquid-based Electrolytes as an Alternative to Carbonate-based Electrolytes

An azobenzene-modified redox-active ionic liquid electrolyte for supercapacitors

A new redox-active ionic liquid (2-(4-(phenyldiazenyl)phenoxy)ethyl)-1-methyl-imidazolium tetrafluoroborate ([ABEMIM][BF₄]) is demonstrated. It is incorporated into another ionic liquid ([EMIM][BF₄]) to form a mixed IL electrolyte, which can markedly improve the capacitance performance of carbon-based supercapacitors via extra pseudocapacitance contribution. It opens up a new path to develop high-energy supercapacitors through introducing a redox-active ionic liquid to electrolytes.

Chemical Vapor Deposition of Ionic Liquids for the Fabrication of Ionogel Films and Patterns

Film deposition and high-resolution patterning of ionic liquids (ILs) remain a challenge, despite a broad range of applications that would benefit from this type of processing. Here, we demonstrate for the first time the chemical vapor deposition (CVD) of ILs. The IL-CVD method is based on the formation of a non-volatile IL through the reaction of two vaporized precursors. Ionogel micropatterns can be easily obtained via the combination of IL-CVD and standard photolithography, and the resulting microdrop arrays can be used as microreactors. The IL-CVD approach will facilitate leveraging the properties of ILs in a range of applications and microfabricated devices.

Novel piperidinium-based ionic liquid as electrolyte additive for high voltage lithium-ion batteries

Conventional carbonate-based electrolyte is prone to oxidative decomposition at high voltage (over 4.5 V vs. Li/Li+), which leads to the bad oxidation stability and inferior cycling performance of lithium ion batteries (LIBs). To solve these problems, a novel ionic liquid (IL) N-butyronitrile-N-methylpiperidinium bis(fluorosulfonyl)imide (PP1,CNFSI) was synthesized and explored as the additive to the LiPF6-ethylene carbonate (EC)/dimethyl carbonate (DMC) electrolyte. For the cell performance, the addition of PP1,CNFSI not only inhibits overcharge phenomenon, but also improves discharge capacity, thus enhancing capacity retention capability. Compared to the cell with blank electrolyte, the capacity retentions of adding 15 wt% PP1,CNFSI into the electrolyte were improved to 96.8% and 97% from 82.8% and 78.7% at 0.2 C and 5 C, respectively. The effects of PP1,CNFSI on the LNMO cathode surface were further investigated by electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). It reveals that PP1,CNFSI addition drives the formation of solid electrolyte interphase (SEI) film which suppresses oxidative decomposition of the electrolyte and protects the structure cathode material.

Synthesis, characterization and application of a non-flammable dicationic ionic liquid in lithium-ion battery as electrolyte additive

A novel dicationic room temperature ionic liquid, 1,1′-(5,14-dioxo-4,6,13,15-tetraazaoctadecane-1,18-diyl) bis(3-(sec-butyl)-1H-imidazol-3-ium) bis((trifluoromethyl)-sulfonyl) imide has been synthesized and fully characterized. Its thermal and electrochemical analyses along with transport properties have been studied. We propose it as a potential nominal additive to the commonly used conventional organic carbonate electrolyte mixture and study its adaptability in Lithium-ion batteries which are the prime power sources for ultraportable electronic devices. We have compared the performance characteristics of the full cells made without and with this ionic liquid. The cells comprise lithium nickel cobalt manganese oxide cathode, graphite anode and ethylene carbonate - dimethyl carbonate (1:1, v/v + LiPF₆) mixture electrolyte with nominal amount of ionic liquid as additive. The major concern with conventional electrolytes such as degradation of the materials inside batteries has been addressed by this electrolyte additive. Additionally, this additive is safer at relatively higher temperature. In its presence, the overall battery life is enhanced and it shows good cycling performance and coulombic efficiency with better discharge capacities (22% higher) after 100 cycles. Even after the increase in current rate from 10 mA/g to 100 mA/g, the cell still retains around 73% of capacity.

Specifically Designed Ionic Liquids—Formulations, Physicochemical Properties, and Electrochemical Double Layer Storage Behavior

Two key features—non-volatility and non-flammability—make ionic liquids (ILs) very attractive for use as electrolyte solvents in advanced energy storage systems, such as supercapacitors and Li-ion batteries. Since most ILs possess high viscosity and are less prone to dissolving common electrolytic salts when compared to traditional electrolytic solvents, they must be formulated with low viscosity thinner solvents to achieve desired ionic conductivity and dissolution of electrolyte salts in excess of 0.5 M concentration. In the past few years, our research group has synthesized several specifically designed ILs (mono-cationic, di-cationic, and zwitterionic) with bis(trifluoromethylsulfonyl)imide (TFSI) and dicyanamide (DCA) as counter anions. This article describes several electrolyte formulations to achieve superior electrolytic properties. The performance of a few representative IL-based electrolytes in supercapacitor coin cells is presented.

Synthesis and physicochemical characterization of room temperature ionic liquids and their application in sodium ion batteries

Sodium ion batteries (SIBs) based on IL electrolytes have attracted great attention, particularly in large-scale energy storage systems for renewable energy due to the abundance of sodium and the excellent safety resulting from the use of non-flammable ionic liquid (IL) electrolytes. In this article, a series of 15 functionalized room temperature ionic liquids (RTILs) suitable as electrolytes is presented. Special emphasis was laid on the purity of the synthesized RTILs and a consistent and uniform characterization of their physicochemical properties. Evaluation of the viscosity, conductivity, and thermal and electrochemical stabilities resulted in clear structure-property relationships, rendering the ether functionalized RTILs most promising for application in SIBs. Electrochemical investigations of the ether functionalized IL electrolytes in SIB half cells (Na0.6Mn0.9Co0.1O2 as cathode material) proved their compatibility with a SIB system. Stable cycling performance was achieved with the piperidinium based RTIL IL 6 outperforming the organic electrolyte by far with a retention of 81% after 350 cycles. These results show the suitability of RTILs to enhance the performance of SIB systems and serve as a basis for the design of high performance IL electrolytes.

High Performance Polymer/Ionic Liquid Thermoplastic Solid Electrolyte Prepared by Solvent Free Processing for Solid State Lithium Metal Batteries

A polymer/ionic liquid thermoplastic solid electrolyte based on poly(ethylene oxide) (PEO), modified sepiolite (TPGS-S), lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), and 1-Butyl-1-methylpyrrolidinium bis(trifluoromethanesulfonyl)imide (PYR14TFSI) ionic liquid is prepared using solvent free extrusion method. Its physical-chemical, electrical, and electrochemical properties are comprehensively studied. The investigated solid electrolyte demonstrates high ionic conductivity together with excellent compatibility with lithium metal electrode. Finally, truly Li-LiFePO₄ solid state coin cell with the developed thermoplastic solid electrolyte demonstrates promising electrochemical performance during cycling under 0.2 C/0.5 C protocol at 60 °C.

A 1,2,3-triazolate lithium salt with ionic liquid properties at room temperature

A triethylene glycol-based 1,2,3-triazolate lithium salt with ionic liquid properties at room temperature is synthesized in three steps including copper-catalysed cycloaddition between alkyne-functionalized monomethoxy-triethylene glycol and azidomethyl pivalate, followed by the deprotection of the methyl pivalate group and further lithiation of the 1H-1,2,3-triazole intermediate.

Surface/Interfacial Structure and Chemistry of High-Energy Nickel-Rich Layered Oxide Cathodes: Advances and Perspectives

The urgent prerequisites of high energy-density and superior electrochemical properties have been the main inspiration for the advancement of cathode materials in lithium-ion batteries (LIBs) in the last two decades. Nickel-rich layered transition-metal oxides with large reversible capacity as well as high operating voltage are considered as the most promising candidate for next-generation LIBs. Nonetheless, the poor long-term cycle-life and inferior thermal stability have limited their broadly practical applications. In the research of LIBs, it is observed that surface/interfacial structure and chemistry play significant roles in the performance of cathode cycling. This is due to the fact that they are basically responsible for the reversibility of Li⁺ intercalation/deintercalation chemistries while dictating the kinetics of the general cell reactions. In this Review, the surface/interfacial structure and chemistry of nickel-rich layered cathodes involving structural defects, redox mechanisms, structural evolutions, side-reactions among others are initially demonstrated. Recent advancements in stabilizing the surface/interfacial structure and chemistry of nickel-rich cathodes by surface modification, core-shell/concentration-gradient structure, foreign-ion substitution, hybrid surface, and electrolyte additive are presented. Then lastly, the remaining challenges such as the fundamental studies and commercialized applications, as well as the future research directions are discussed.

Computer Simulations of Ion Transport in Polymer Electrolyte Membranes

Understanding the mechanisms and optimizing ion transport in polymer membranes have been the subject of active research for more than three decades. We present an overview of the progress and challenges involved with the modeling and simulation aspects of the ion transport properties of polymer membranes. We are concerned mainly with atomistic and coarser level simulation studies and discuss some salient work in the context of pure binary and single ion conducting polymer electrolytes, polymer nanocomposites, block copolymers, and ionic liquid-based hybrid electrolytes. We conclude with an outlook highlighting future directions.