Current materials and techniques for direct restorations in posterior teeth. Part 1: Silver amalgam

The effect of common dental fixtures on treatment planning and delivery for head and neck intensity modulated proton therapy

PURPOSE

Proton treatment plan perturbation by common dental fixtures such as amalgams (Am) and porcelain-fused-to-metal (PFM) crowns has, to date, been uncharacterized. Previous studies have been conducted to determine the physical effect of these materials within the beam path for single spots, but their effects on complex treatment plans and clinical anatomy have not yet been quantified. The present manuscript aims to study the effect of Am and PFM fixtures on proton treatment planning in a clinical setting.

METHODS

An anthropomorphic phantom with removable tongue, maxilla, and mandible modules was simulated on a clinical computed tomography (CT) scanner. Spare maxilla modules were modified to include either a 1.5 mm depth central groove occlusal amalgam (Am) or a porcelain-fused-to-metal (PFM) crown, implanted on the first right molar. Modified tongue modules were 3D printed to accommodate several axial or sagittal oriented pieces of EBT-3 film. Clinically representative spot-scanning proton plans were generated in Eclipse v.15.6 using the proton convolution superposition (PCS) algorithm v.15.6.06 using a multi-field optimization (MFO) technique with the goal of delivering a uniform 54 Gy dose to a clinical target volume (CTV) typical of a base-of-tongue (BoT) treatment. A typical geometric beam arrangement of two anterior oblique (AO) beams and a posterior beam was employed. Plans optimized without any material overrides were delivered to the phantom A) without implants; B) with Am fixture; or C) with PFM crown. Plans were also reoptimized and delivered with inclusion of material overrides to equate relative stopping power of the fixture with that of a previously measured result.

RESULTS

Plans exhibit slightly greater dose weight towards AO beams. The optimizer accounted for inclusion of fixture overrides by increasing beam weights to the beam closest to the implant. Film measurements exhibited cold spots directly within the beam path through the fixture in plans with and without overridden materials. Cold spots were somewhat mitigated in plans including overridden materials in the structure set but were not entirely eliminated. Cold spots associated with Am and PFM fixtures were quantified at 17% and 14% for plans without overrides, respectively, and 11% and 9% with using Monte Carlo simulation. Compared with film measurements and Monte Carlo simulation, the treatment planning system underestimates the dose shadowing effect in plans including material overrides.

CONCLUSIONS

Dental fixtures create a dose shadowing effect directly in line with the beam path through the material. This cold spot is partially mitigated by overriding the material to measured relative stopping powers. Due to uncertainties in modeling perturbation through the fixture, the magnitude of the cold spot is underestimated using the institutional TPS when compared to measurement and MC simulation.

Physical characterization of therapeutic proton delivery through common dental materials

PURPOSE

Dental fixtures are commonplace in an aging, radiation treatment population. The current, local standard of practice in particle therapy is to employ treatment geometries to avoid delivery through implanted dental fixtures. The present study aims to observe the physical effect of delivering therapeutic proton beams through common dental fixture materials as prelude to an eventual goal of assessing the feasibility of using treatment geometries not specified for avoidance of oral implants. A sampling of common dental materials was selected based on prosthodontic consult and was evaluated in terms of relative stopping power and three-dimensional (3D) dose perturbation.

METHODS

Amalgams, porcelain-fused-to-metal (PFM) crowns consisting of zirconia and non-noble base metals, and lithium disilicate implants were chosen for analysis. Theoretical stopping power (S) and mass stopping power (S/ρ) were calculated using the Stopping and Range of Ions in Matter (SRIM) application, basing stoichiometric compositions of each fixture on published materials data. S and S/ρ were calculated for a range of historically available compositions of amalgams from 1900 until the current era. The perturbance of S and S/ρ as a function of clinically relevant ranges of amalgam compositions for the modern era was analyzed. Water equivalent thickness (WET) and relative stopping power (S_rel ) of each material was measured for a clinical spot-scanning proton beam with monoenergies of 159.9 and 228.8 MeV with a multi-layer ionization chamber (MLIC). Subsequently, 3D dose perturbation was assessed by delivering proton beams through a custom phantom designed to simulate both en-face and on-edge treatment geometries through the selected materials. A treatment plan mimicking the experimental delivery was constructed in the institutional treatment planning system and calculated using TOPAS based Monte Carlo Simulation (MCS). Experimental results were used to validate the MCS. Finally, TPS outputs were compared to MCS to determine the accuracy of the dose calculation model.

RESULTS

Historical compositions of amalgams ranged in S from 44.8 to 42.9 MeV/cm, with the greatest deviation being observed for the 1900-1959 era. Deviation as a function of amalgam composition from the modern era was most sensitive to proportion of Hg, accounting for deviations up to -4.2% at the greatest clinically relevant concentration. S/ρ was not found to vary greatly between each porcelain and metal alloy material for porcelain-fused-to-metal (PFM) type crowns. Relative stopping powers ranged between 1.3 and 5.4 for all studied materials, suggesting substantial changes in proton range with respect to water. Film measurements of pristine spots confirm dose perturbance and shortening of proton range, with an upstream shift of each Bragg peak being observed directly behind the installed fixture. At high energies, cold spots were found in all cases directly behind each material feature with a medial fill-in of dose occurring distally. Qualitative agreement of spot perturbance was confirmed between film measurements and MCS. Finally, when comparing integrated depth doses (IDD) by summing over all axial directions, good agreement is observed between TPS and MCS.

CONCLUSIONS

All dental materials studied substantially perturbed the dosimetry of pristine proton spots both in terms of WET/S_rel as well as the spatial distribution of dose. Proton range was quantifiably shortened, and each dental material affected a cold spot directly behind the object with medial dose back-filling was observed distally. Monte Carlo simulations and Eclipse dose calculations exhibited good agreement with measurements, suggesting that treatment planning without employing avoidance strategies may be possible with further investigation. This article is protected by copyright. All rights reserved.

Uma revisão de escopo de revisões sistemáticas sobre exposição humana ao mercúrio

Resumo: Introdução: a promulgação da Convenção de Minamata no Brasil em 2018 incentivou o cumprimento dos seus objetivos em reduzir o uso e a poluição por mercúrio. Objetivo: caracterizar a produção científica sobre exposição humana ao mercúrio e identificar lacunas de conhecimento a fim de subsidiar a tomada de decisão em saúde. Métodos: revisão de escopo de revisões sistemáticas e metanálises, sem restrição de idioma ou data de publicação, utilizando as bases PubMed, BVS e Cochrane Library. Resultados: 71 estudos atenderam aos critérios de elegibilidade, com 40 revisões sistemáticas, 30 metanálises e 1 overview. Amálgama dentário e contaminação alimentar e ambiental por atividades que utilizam mercúrio foram as fontes de exposição mais mencionadas. Os temas mais estudados contaram com transtornos mentais e comportamentais, assim como uso de biomarcadores e testes neurocomportamentais relacionados à exposição ao mercúrio. Discussão: lacunas como a exposição ocupacional ao mercúrio, uso em práticas tradicionais e em cosméticos apontam para a necessidade de mais estudos. As revisões identificadas podem oferecer subsídios para sínteses de evidências e protocolos de atenção à saúde de populações expostas, assim como para a elaboração de políticas públicas que visem o controle do uso e da exposição ao mercúrio.

Recent update on potential cytotoxicity, biocompatibility and preventive measures of biomaterials used in dentistry

Dental treatment is provided for a wide variety of oral health problems like dental caries, periodontal diseases, periapical infections, replacement of missing teeth and orthodontic problems. Various biomaterials, like composite resins, amalgam, glass ionomer cement, acrylic resins, metal alloys, impression materials, bone grafts, membranes, local anaesthetics, etc., are used for dental applications. The physical and chemical characteristics of these materials influence the outcome of dental treatment. It also impacts on the biological, allergic and toxic potential of biomaterials. With innovations in science and their positive results, there is also a need for awareness about the biological risks of these biomaterials. The aim of dental treatment is to have effective, yet safe, and long-lasting results for the benefit of patients. For this, it is important to have a thorough understanding of biomaterials and their effects on local and systemic health. Materials used in dentistry undergo a series of analyses before their oral applications. To the best of our knowledge, this is the first and original review that discusses the reasons for and studies on the toxicity of commonly used biomaterials for applications in dentistry. It will help clinicians to formulate a methodical approach for the selection of dental biomaterials, thus providing an awareness for forecasting their risk of toxic reactions.

Is Dental Amalgam a Higher Risk Factor rather than Resin-Based Restorations for Systemic Conditions? A Systematic Review

Objective: The aim of this study was to confirm the hypothesis that patients with one or more amalgam restorations have an increased risk for systemic diseases rather than patients with resin-based restorations. Data: The data search produced an initial 3568 total number of records. All titles and abstract were reviewed by five independent examiners, and only 36 records were selected for full text in depth examination. Out of these, only nine publications matched the inclusion criteria and were included in this systematic review. Sources: Electronic databases (MEDLINE, Scopus, Embase, and Web of Knowledge) were searched up to June 2019. In addition, a manual search was carried out on journals related to this topic. Study selection: All selected human clinical studies compared patients with dental amalgam restorations to patients with non-amalgam restorations on restorative material related diseases/health conditions with at least 50 patients and a reasonable follow up. The systemic effects of dental restorations were analyzed. As for any systemic effects, there was no difference between amalgam and composite restoration. Conclusions: With the limitations of the few available randomized controlled trials (RCTs) on the matter, amalgam restorations, similarly to other modern resin-based materials, were not related to an increased risk of systemic diseases or conditions. Clinical significance: On the basis of the available RCTs, amalgam restorations, if compared with resin-based fillings, do not show an increased risk for systemic diseases. There is still insufficient evidence to exclude or demonstrate any direct influence on general health. The removal of old amalgam restorations and their substitution with more modern adhesive restorations should be performed only when clinically necessary and not just for material concerns. In order to better evaluate the safety of dental amalgam compared to other more modern restorative materials, further RCTs that consider important parameters such as long and uniform follow up periods, number of restorations per patient, and sample populations representative of chronic or degenerative diseases are needed.

Antibacterial quaternary ammonium compounds in dental materials: A systematic review

OBJECTIVE

Quaternary ammonium compounds (QACs) represent one of the most effective classes of disinfectant agents in dental materials and resin nanocomposites. This reviews aims to give a wide overview on the research in the field of antibacterial QACs in dental materials and nanocomposites.

METHOD

An introduction to dental materials components as well as the microorganisms and methods of evaluation for the antimicrobial assays are presented. Then, the properties and synthesis route of QACs, as monomer and filler, are shown. Finally, antimicrobial monomers and fillers, specifically those contain quaternary ammonium salts (QASs), in dental materials are reviewed.

RESULTS

QACs have been used as monomer and micro/nanofiller in restorative dentistry. They possess one or more methacrylate functional groups to participate in polymerization reactions. QACs with multiple methacrylate groups can also be used as crosslinking agents. Furthermore, QACs with chain length from ∼12 to 16 have higher antimicrobial activity in cured dental resins. In general, increasing the chain length leads to a threshold value (critical point) and then it causes decrease in the antimicrobial activity.

SIGNIFICANCE

The current state of the art of dental materials and resin nanocomposites includes a wide variety of antimicrobial materials. Among them, QACs presents low cytotoxicity and excellent long-term antimicrobial activity without leaching out over time.

Seal, replacement or monitoring amalgam restorations with occlusal marginal defects? Results of a 10-year clinical trial

The aim of this prospective and blind clinical trial was to assess the effectiveness of sealing localized marginal defects of amalgam restoration that were initially scheduled to be replaced. A cohort of twenty six patients with 60 amalgam restorations (n=44Class I and n=16Class II), that presented marginal defects deviating from ideal (Bravo) according to USPHS criteria, were assigned to either sealing or replacement groups: A: sealing n=20, Replacement n=20, and no treatment (n=20). Two blind examiners evaluated the restorations at baseline (K=0.74) and after ten years (K=0.84) according with USPHS criteria, in four parameters: marginal adaptation (MA), secondary caries (SC), marginal staining (MS) and teeth sensitivity (TS). Multiple comparison of restorations degradation/upgrade was analyzed by Friedman test and the comparisons within groups were performed by Wilcoxon test. After 10 years, 44 restorations were assessed (73.3%), Group A: n=14 and Group B: n=16; and Group C: n=14 sealing and replacement amalgam restorations presented similar level of quality in MA (p=0.76), SC (p=0.25) and TS (p=0.52), while in MS (p=0.007) presented better performance in replacement group after 10-years. Most of the occlusal amalgam restorations with marginal gaps showed similar long term outcomes than the restorations were sealed, replaced, or not treated over a 10-year period. Most of the restorations of the three groups were clinically acceptable, under the studied parameters. All restorations had the tendency to present downgrade/deterioration over time.

Effect of Nd:YAG laser pulse energy on mercury vapor release from the dental amalgam

OBJECTIVE

The aim of this study was to evaluate the effect of different pulse energies of Nd:YAG laser on the amalgam ablation, and its effect on the amount of mercury vapor release from amalgam.

BACKGROUND DATA

Toxic vapor release from amalgam restorations at the laser focus site is possible.

MATERIALS AND METHODS

Forty-five amalgam samples (4 mm in diameter and 5 mm in height) were placed in sealed containers and underwent Nd:YAG laser irradiation with pulse energies of 50, 150, and 250 mJ at a distance of 1 mm from the amalgam surface for 4 sec. Subsequently, 150 mL of air was collected from the inside of the container using an Apex Pump to analyze the amount of mercury vapor in the air samples using a mercury vapor analyzer. Data were analyzed using Kruskal-Wallis and Mann-Whitney U tests (p<0.05).

RESULTS

The amount of mercury vapor release significantly increased with an increase in the pulse energy of Nd:YAG laser (p<0.001). In addition, the amount of mercury vapor release with 250 mJ pulse energy was significantly higher compared with the standard mercury vapor concentration (50 μg/m(3)) (p<0.001). Nd:YAG laser produced cavities on the amalgam surface, which increased in size with an increase in the energy of the laser beam.

CONCLUSIONS

The amount of mercury vapor significantly increased with an increase in the pulse energy of the laser beam, and was significantly higher than the standard mercury vapor concentration with 250 mJ pulse energy.

Posterior composite restoration update: focus on factors influencing form and function

Restoring posterior teeth with resin-based composite materials continues to gain popularity among clinicians, and the demand for such aesthetic restorations is increasing. Indeed, the most common aesthetic alternative to dental amalgam is resin composite. Moderate to large posterior composite restorations, however, have higher failure rates, more recurrent caries, and increased frequency of replacement. Investigators across the globe are researching new materials and techniques that will improve the clinical performance, handling characteristics, and mechanical and physical properties of composite resin restorative materials. Despite such attention, large to moderate posterior composite restorations continue to have a clinical lifetime that is approximately one-half that of the dental amalgam. While there are numerous recommendations regarding preparation design, restoration placement, and polymerization technique, current research indicates that restoration longevity depends on several variables that may be difficult for the dentist to control. These variables include the patient’s caries risk, tooth position, patient habits, number of restored surfaces, the quality of the tooth–restoration bond, and the ability of the restorative material to produce a sealed tooth–restoration interface. Although clinicians tend to focus on tooth form when evaluating the success and failure of posterior composite restorations, the emphasis must remain on advancing our understanding of the clinical variables that impact the formation of a durable seal at the restoration–tooth interface. This paper presents an update of existing technology and underscores the mechanisms that negatively impact the durability of posterior composite restorations in permanent teeth.

Silver as an antimicrobial: facts and gaps in knowledge

Silver has been used for centuries. Today, silver and silver nanoparticles (AgNPs) are used in a wide range of healthcare, food industry, domiciliary applications, and are commonly found in hard surface materials and textiles. Such an extensive use raises questions about its safety, environmental toxicity and the risks associated with microbial resistance and cross-resistance. If the mechanisms of antimicrobial action of ionic silver (Ag+) have been studied, there is little understanding of AgNPs interactions with microorganisms. There have been excellent reviews on the bacterial resistance mechanisms to silver, but there is a paucity of information on resistance to AgNPs. Silver toxicity and accumulation in the environment has been studied and there is a better understanding of silver concentration and species in different environmental compartments. However, owing to the increased applications of silver and AgNPs, questions remain about the presence and consequences of AgNPs in the environment. This review provides an historical perspective of silver usage, an overview of applications, and combined information of microbial resistance and toxicity. Owing the evidence provided in this review, a call for a better understanding and control of silver usage, and for tighter regulations of silver and AgNPs usage is proposed.

The dental amalgam toxicity fear: a myth or actuality

Amalgam has been used in dentistry since about 150 years and is still being used due to its low cost, ease of application, strength, durability, and bacteriostatic effect. When aesthetics is not a concern it can be used in individuals of all ages, in stress bearing areas, foundation for cast-metal and ceramic restorations and poor oral hygiene conditions. Besides all, it has other advantages like if placed under ideal conditions, it is more durable and long lasting and least technique sensitive of all restorative materials, but, concern has been raised that amalgam causes mercury toxicity. Mercury is found in the earth's crust and is ubiquitous in the environment, so even without amalgam restorations everyone is exposed to small but measurable amount of mercury in blood and urine. Dental amalgam restorations may raise these levels slightly, but this has no practical or clinical significance. The main exposure to mercury from dental amalgam occurs during placement or removal of restoration in the tooth. Once the reaction is complete less amount of mercury is released, and that is far below the current health standard. Though amalgam is capable of producing delayed hypersensitivity reactions in some individuals, if the recommended mercury hygiene procedures are followed the risks of adverse health effects could be minimized. For this review the electronic databases and PubMed were used as data sources and have been evaluated to produce the facts regarding amalgam's safety and toxicity.

Posterior amalgam restorations--usage, regulation, and longevity

The use of dental amalgam has declined, but in most of the world, amalgam is the most widely used and widely taught direct restorative material for load-bearing posterior restorations. There are few national regulations on the use of amalgam; however, there are several nations where few amalgam restorations are placed. Long-term studies have shown that under optimum conditions, posterior restorations of amalgam and resin composite last longer than reported previously and that amalgam restorations outlast composite restorations. In general practice settings, posterior amalgam and composite restorations both have lower longevities.

Exposição ocupacional por uso de mercúrio em odontologia: uma revisão bibliográfica

Este trabalho visa apresentar dados referentes ao gerenciamento de resíduos perigosos na área da saúde, com ênfase no uso de mercúrio em odontologia. Foi elaborado com base numa revisão bibliográfica sobre o uso do mercúrio em amálgama dentário e seus potenciais riscos toxicológicos ligados à exposição, tanto de profissionais quanto de pacientes. Os estudos levantados baseiam-se também em recomendações de alguns organismos internacionais e nacionais em relação ao uso do mercúrio e seus limites de exposição ocupacional. Os dados da literatura revelam o potencial tóxico do mercúrio, tanto para o ambiente quanto para a saúde humana. Tendo em vista que o amálgama ainda é muito utilizado na odontologia, considera-se necessário uma tomada de decisão político-administrativa que vise minimizar os riscos relacionados ao uso de amálgama em procedimentos odontológicos, voltados para a segurança ocupacional, dos indivíduos e do ambiente, baseada em diretrizes e orientações técnicas sobre seu uso, descarte e disposição final.

Preparation and Properties of Novel Dentin Adhesives with Esterase Resistance

A new methacrylate monomer, trimethylolpropane mono allyl ether dimethacrylate (TMPEDMA), was synthesized and evaluated. This branched methacrylate was designed to increase esterase-resistance when incorporated into conventional HEMA (2-hydroxyethyl methacrylate)/BisGMA (2,2-bis[4(2-hydroxy-3-methacryloyloxy-propyloxy)-phenyl] propane) dental adhesives. The new adhesives, HEMA/BisGMA/TMPEDMA in a 45/30/25 (w/w) ratio were formulated with H(2)O at 0 (A0T) and 8 wt % water (A8T) and compared with control adhesives (HEMA/BisGMA, 45/55 (w/w), at 0 (A0) and 8 wt % (A8) water). Camphoroquinone (CQ), 2-(dimethylamino) ethyl methacrylate and diphenyliodonium hexafluorophosphate were used as photoinitiators. The new adhesives showed a degree of conversion comparable with the control and improved modulus and glass transition temperature (T(g)). Exposure of photopolymerized discs to porcine liver esterase for up to eight days showed that the net cumulative methacrylic acid (MAA) release in adhesives formulated with the new monomer and 8% water (A8T: 182 μg/mL) was dramatically (P < 0.05) decreased in comparison to the control (A8: 361.6 μg/mL). The results demonstrate that adhesives made with the new monomer and cured in water to simulate wet bonding are more resistant to esterase than conventional HEMA/BisGMA adhesive.

Multiscale mechanics of hierarchical structure/property relationships in calcified tissues and tissue/material interfaces

This paper presents a review plus new data that describes the role hierarchical nanostructural properties play in developing an understanding of the effect of scale on the material properties (chemical, elastic and electrical) of calcified tissues as well as the interfaces that form between such tissues and biomaterials. Both nanostructural and microstructural properties will be considered starting with the size and shape of the apatitic mineralites in both young and mature bovine bone. Microstructural properties for human dentin and cortical and trabecular bone will be considered. These separate sets of data will be combined mathematically to advance the effects of scale on the modeling of these tissues and the tissue/biomaterial interfaces as hierarchical material/structural composites. Interfacial structure and properties to be considered in greatest detail will be that of the dentin/adhesive (d/a) interface, which presents a clear example of examining all three material properties, (chemical, elastic and electrical). In this case, finite element modeling (FEA) was based on the actual measured values of the structure and elastic properties of the materials comprising the d/a interface; this combination provides insight into factors and mechanisms that contribute to premature failure of dental composite fillings. At present, there are more elastic property data obtained by microstructural measurements, especially high frequency ultrasonic wave propagation (UWP) and scanning acoustic microscopy (SAM) techniques. However, atomic force microscopy (AFM) and nanoindentation (NI) of cortical and trabecular bone and the dentin-enamel junction (DEJ) among others have become available allowing correlation of the nanostructural level measurements with those made on the microstructural level.

Parametric study of the effect of phase anisotropy on the micromechanical behaviour of dentin-adhesive interfaces

A finite element (FE) model has been developed based upon the recently measured micro-scale morphological, chemical and mechanical properties of dentin-adhesive (d-a) interfaces using confocal Raman microspectroscopy and scanning acoustic microscopy (SAM). The results computed from this FE model indicated that the stress distributions and concentrations are affected by the micro-scale elastic properties of various phases composing the d-a interface. However, these computations were performed assuming isotropic material properties for the d-a interface. The d-a interface components, such as the peritubular and intertubular dentin, the partially demineralized dentin and the so-called "hybrid layer" adhesive-collagen composite, are probably anisotropic. In this paper, the FE model is extended to account for the probable anisotropic properties of these d-a interface phases. A parametric study is performed to study the effect of anisotropy on the micromechanical stress distributions in the hybrid layer and the peritubular dentin phases of the d-a interface. It is found that the anisotropy of the phases affects the region and extent of stress concentration as well as the location of the maximum stress concentrations. Thus, the anisotropy of the phases could effect the probable location of failure initiation, whether in the peritubular region or in the hybrid layer.

Interfacial chemistry of moisture-aged class II composite restorations

Under in vivo conditions, the adhesive/dentin bond at the gingival margin of class II composite restorations can be the first defense against substances that may penetrate and ultimately undermine the composite restoration. Deterioration of this bond during aqueous aging is an area of intense investigation, but to date, the majority of our techniques have provided only an indirect assessment of the degrading components. The purpose of this study was to analyze the in situ molecular structure of adhesive/dentin interfaces in class II composite restorations, following aging in aqueous solutions. Class II preparations were cut from 12 unerupted human third molars, with a water-cooled, high-speed, dental handpiece. The prepared teeth were randomly selected for restoration with single bond (SB) and Z100 (3M). Teeth were restored, as per the manufacturer's directions, under environmental conditions that simulated humidity and temperature characteristics of the oral cavity. Restored teeth were kept in sterile Delbecco's phosphate saline for 48 h or 90 days. The samples were sectioned occlusogingivally and micro-Raman spectra were acquired at approximately 1.5 microm spatial resolution across the composite/adhesive/dentin interfaces at the gingival margins. Samples were wet throughout spectral acquisition. The relative intensity of bands associated with the adhesive in the interfacial region decreased dramatically after aqueous storage. This decrease in concert with the similar depth of dentin demineralization provides direct spectroscopic evidence of leaching of adhesive monomer from the interface during the 90 days of storage. SB adhesive infiltrated 4-5 microm of 12-microm demineralized dentin at the gingival margin. After 90 days of aqueous storage, SB adhesive infiltration was reduced to approximately 2 microm, leaving approximately 10 microm of demineralized dentin collagen exposed at the gingival margin. The unprotected collagen at the gingival margin of the aged class II composite restorations was disorganized, suggesting hydrolysis of the collagen, with 90 days of aqueous storage.

Silver as biocides in burn and wound dressings and bacterial resistance to silver compounds

Silver products have been used for thousands of years for their beneficial effects, often for hygiene and in more recent years as antimicrobials on wounds from burns, trauma, and diabetic ulcers. Silver sulfadiazine creams (Silvazine and Flamazine) are topical ointments that are marketed globally. In recent years, a range of wound dressings with slow-release Ag compounds have been introduced, including Acticoat, Actisorb Silver, Silverlon, and others. While these are generally accepted as useful for control of bacterial infections (and also against fungi and viruses), key issues remain, including importantly the relative efficacy of different silver products for wound and burn uses and the existence of microbes that are resistant to Ag+. These are beneficial products needing further study, although each has drawbacks. The genes (and proteins) involved in bacterial resistance to Ag have been defined and studied in recent years.

Teaching the placement of posterior resin-based composite restorations in U.S. dental schools

BACKGROUND

In light of the increased use of and demand for posterior resin-based composite restorations in dental practice, the authors investigated U.S. dental schools' current teaching with regard to placement of posterior composite restorations.

METHODS

In early 2005, the authors invited 52 schools to participate in an e-mailed survey.

RESULTS

The authors received 47 completed responses, for a 90 percent response rate. Although all schools provided didactic and clinical teaching in the placement of occlusal resin-based composites in posterior teeth, the survey results showed variation in teaching the use of two- and three-surface occlusoproximal composites.

CONCLUSIONS

The survey findings demonstrate a marked change in instruction in placement of posterior resin-based composite restorations in U.S. dental schools during the last five to 10 years. However, the authors found much variation in the nature and extent of the instruction and techniques taught.

CLINICAL IMPLICATIONS

Dental schools need to ensure that their graduating students are well-prepared for independent clinical practice.

Teaching of posterior composite resin restorations in undergraduate dental schools in Ireland and the United Kingdom

PURPOSE

The aim of this study was to investigate the current teaching of posterior composite resin restorations to undergraduate dental students in Ireland and the United Kingdom (UK). The investigation was a follow-up to a survey undertaken in 1997.

MATERIALS AND METHODS

A questionnaire was distributed by e-mail to the Heads of Departments of Restorative Dentistry/Units of Operative Dentistry in each of the 15 dental schools with undergraduate dental degree programmes in Ireland and the UK. The questionnaire sought information relating to the teaching of posterior composite resin restorations in each dental school.

RESULTS

Fifteen completed questionnaires were returned (response rate = 100%). All schools (n = 15) taught the placement of composite resin restorations in occlusal cavities, 14 schools taught composite resin placement in two-surface occlusoproximal cavities and nine schools taught composite resin placement in three-surface occlusoproximal cavities. Respondents anticipated that the amount of preclinical teaching of posterior composite resin placement will increase twofold over the next 5 years, whilst the corresponding teaching of amalgam will fall to two-thirds its current level. Variation was found between dental schools in the teaching of the principles of cavity design, contraindications to placement, indications for lining and basing techniques, matrix and wedging techniques, and the use of curing lights.

CONCLUSIONS

The amount of teaching of posterior composite resin restorations in undergraduate dental schools in Ireland and the UK has increased since the time of a previous survey in 1997. Composite resin may soon equal or overtake amalgam as the material of choice when restoring posterior cavities in Irish and UK dental schools. There was, however, much variation in the nature and extent of the teaching and the techniques taught.

Isolation of silver- and antibiotic-resistant Enterobacter cloacae from teeth

Antibiotic-resistant bacteria pose a serious threat to human health; hence the mechanisms that lead to their selection need to be investigated. One possible mechanism is that the silver and mercury in amalgam dental restorations may select for bacteria that contain heavy metal and antibiotic-resistance determinants, leading to the spread of these resistances, particularly if they are contained on the same mobile genetic element. The incidence of silver-resistant bacteria on teeth is investigated in this work. Two silver-resistant Enterobacter cloacae isolates were isolated from infected teeth containing dental restorations. Both isolates were also resistant to ampicillin, erythromycin, and clindamycin. The silE gene, which is encoded on the silver resistance operon, has been sequenced from both isolates. Results suggest that the silver resistance operon is encoded on plasmid DNA.

A 3-year longitudinal, controlled clinical study of a gallium-based restorative material

AIM

The aim of this three-year longitudinal controlled study was to compare the clinical performance of Galloy versus a high copper, mercury based Dispersalloy filling material.

METHODS

Moderate to large class I and class II cavities or replacement restorations were selected and 25 Galloy restorations and 25 Dispersalloy controls were placed in 14 adult patients by a single operator. Restorations were photographed and a silicone impression recorded at baseline, 6 months, 1 year, 2 years and 3 years.

RESULTS

At 3 years all 22 Dispersalloy restorations but only 4 Galloy restorations were still in situ. Three Dispersalloy restorations were lost to follow-up. Tooth fracture was observed in 15 (60%) of the Galloy restorations by the end of the 3 years, compared to one (4%) Dispersalloy restoration, which failed due to tooth fracture. A further six Galloy restorations had to be removed due to complaints of persistent pain. Four teeth restored with Galloy required endodontic treatment but none of the Dispersalloy restored teeth required endodontics. Of the four Galloy restorations remaining in situ, three were relatively small restorations and the fourth a moderate sized restoration required a marginal repair.

CONCLUSION

The clinical performance of Galloy restorations was so grossly inferior to the Dispersalloy controls that Galloy cannot be recommended for clinical use in moderate to large or multi-surface cavities.

Micromechanical analysis of dentin/adhesive interface by the finite element method

The interfacial microstructure and spatial distribution of the modulus of elasticity have a profound effect on load transfer at the dentin/adhesive (d/a) interface. The microstructure is influenced by the varying degree of demineralization of intertubular and peritubular dentin during etching as well as the depth of adhesive penetration into the hybrid layer. These factors lead not only to a unique microstructure in the vicinity of the dentinal tubules, but also to a mechanically graded hybrid layer. This article investigates the micromechanical stress distribution at a d/a interface with the use of finite element analysis (FEA). Such analysis is now feasible given the newly measured moduli of elasticity at micro- and nanoscales. The results indicate that the morphological and micromechanical properties of the d/a interface affects the stress field such that the fracture/failure is likely to initiate in the stress-concentration zone of peritubular dentin next to the hybrid/exposed-collagen layer. The results suggest that devising a full-depth high modulus hybrid layer may considerably reduce the stress concentration zone and the magnitude of stress concentration in the peritubular dentin next to the hybrid/exposed-collagen layer.

A 3-year clinical evaluation of a gallium restorative alloy

Several alternative materials have been suggested to take the place of amalgam, because of the environmental toxic effects of its mercury component. One such material is gallium-based alloy restoratives. The aim of this in vivo study was to compare the long-term clinical performance of a commercial gallium alloy with an admixed high copper amalgam alloy. For this purpose, 32 gallium and 32 amalgam restorations were placed in molar teeth in 14 human subjects. All the selected patients had at least two molar teeth that required restoration. In this way both restoratives were used in the same oral cavity. The restorations were examined at baseline, 6 months, 1, 2 and 3 years. At baseline, six teeth restored with gallium alloy showed post-operative sensitivity, whereas none of the amalgams were sensitive. At the end of 3 years, only a few amalgam restorations showed slight surface tarnish and marginal integrity loss. None of them needed replacement. Of the 32 gallium restorations placed, five had to be removed because of sensitivity, corrosion and tooth fracture. Also dramatic surface roughness and corrosion were noticed in 12 gallium restoration. According to the results of this clinical study, gallium-based restoratives should not be used before their physical properties are improved.

Diversity of silver resistance genes in IncH incompatibility group plasmids

Silver compounds are used as antimicrobial agents in medicine and bacteria that develop resistance to silver cations (Ag(+)) pose problems similar to those of antibiotic-resistant bacteria. The first set of Ag(+) resistance genes (sil) was from plasmid pMG101, now assigned to the IncHI incompatibility group. Questions of whether sil genes are unique to pMG101 or are more widely found, and whether they are associated with a specific incompatibility group or occur in many plasmid groups and on bacterial chromosomes were addressed. sil genes were identified in five IncH plasmids, but not in plasmids of the IncP incompatibility group. Three sil genes (silP, silR and silE) from these plasmids were PCR-amplified, cloned, sequenced and compared to those of pMG101. Differences of 0-50 nt per kb of sequence were found. Predicted gene products were 0-6% different in amino acid sequence, but the differences did not alter residues thought to be involved in protein function (see supplementary data at http://mic.sgmjournals.org or http://www.uic.edu/depts/mcmi/individual/gupta/index.htm). For representative IncH plasmid R476b and pMG101 the effects of Ag(+) exposure on resistance levels were measured by growth. The inducibility of silC, silR and silE gene expression after Ag(+) exposure was studied by reverse transcriptase (RT)-PCR. Silver resistance increased after Ag(+) exposure for strains carrying plasmid R476b. silC and silE expression from R476b was inducible after Ag(+) exposure and was constitutive and high from pMG101. The mRNA levels for the regulatory gene silR was constitutive for both pMG101 and R476b. Close homologues for silABC(ORF96)RS from pMG101 are clustered on the chromosomes of Escherichia coli strains K-12 and O157:H7, without contiguous silP and silE homologues. Insertion deletions of the E. coli K-12 chromosomal homologues for silA and silP gave Ag(+) hypersensitivity for growth. The silA homologue knockout was complemented back to wild-type resistance by the same gene cloned on a plasmid. Homologues of sil genes have also been identified on other enterobacterial genomes.

Dental amalgam and mercury in dentistry

Mercury in dentistry has re-emerged as a contentious issue in public health, predominantly because so many people are inadvertently exposed to mercury in order to obtain the benefits of dental amalgam fillings, and the risks remain difficult to interpret. This commentary aims to examine the issues involved in public policy assessment of the continued use of dental amalgam in dentistry. More than 30 per cent of Australian adults are concerned about mercury from dental amalgam fillings but only a small percentage report having their amalgam fillings removed. The placement of dental fillings nearly halved between 1983 and 1997, but many millions of dental amalgam fillings exist in the Australian community. These fillings release mercury (mercury vapour or inorganic ions) at a low level (about 2-5 micrograms/day in an adult). Evidence on the health effect of dental amalgams comes from studies of the association between their presence and signs or symptoms of adverse effects or health changes after removal of dental amalgam fillings. More formal risk assessment studies focus on occupational exposure to mercury and health effects. Numerous methodological issues make their interpretation difficult but new research will continue to challenge policymakers. Policy will also reflect prudent and cautious approaches, encouraging minimization of exposure to mercury in potentially more sensitive population groups. Wider environmental concerns and decreasing tolerance of exposure to other mercury compounds (for example, methylmercury in seafoods) will ensure the use of mercury in dentistry remains an issue, necessitating dentists keep their patients informed of health risks and respect their choices.

Dental post-operative sensitivity associated with a gallium-based restorative material

INTRODUCTION

This study forms part of a 2-year longitudinal clinical trial to compare the performance of a gallium-based restorative material (Galloy) with a high copper, mercury based (Dispersalloy) control material.

METHOD

Following Ethical Committee approval, 25 galloy restorations and 25 Dispersalloy controls were placed in 14 adult patients, by a single operator. The cavities were of moderate size, indicating the use of amalgam as the restorative material. All restorations were polished within 1 week of placement, photographed and a silicone impression of the tooth and restoration recorded. In addition, a visual analogue scale (VAS), indicating the extent of any post-operative sensitivity, was completed by each patient for each restoration, immediately prior to polishing. A score of 0 indicated no sensitivity, while a score of 10 indicated the greatest possible sensitivity. At 6-month recall, the VAS scores, silicone impressions and photographs were repeated.

RESULTS

The mean sensitivity scores for the galloy and Dispersalloy restorations at 1 week were 5.1 (+/- 3.4) and 1.0 (+/- 1.5), respectively and at 6 months, 1.8 (+/- 3.0) and 0.2 (+/- 0.1) respectively. The differences between these means at 1 week and at 6 months were significant (P < 0.01).

CONCLUSION

Galloy restorations were associated with a much greater severity of post-operative sensitivity than Dispersalloy restorations.

The teaching of Class I and Class II direct composite restorations in European dental schools

OBJECTIVES

The purpose of this descriptive study was to provide updated data on the teaching of Class I and Class II direct composite restorations in Europe as part of a survey of this aspect of the primary dental curriculum in Europe and North America.

METHODS

Data on the teaching of posterior composite restorations and related matters were collected by means of a postal questionnaire sent to 185 dental schools known to exist in Europe. Non-respondents were sent a second questionnaire after two months. Further information pertaining to student requirements was sought after six months from all respondents.

RESULTS

The response ranged from 92% for dental schools in Scandinavia to 40% from dental schools in Southern Europe with an overall response of 56%. All but four of the 104 participating schools were found to teach the use of composites in Class I and Class II, two-surface situations in at least premolar teeth. Contraindications and techniques taught for posterior composites varied within and between the country groupings of Northern and Central Europe. Scandinavia, Southern Europe and Eastern Europe. However, certain consensus views were identified. The experience of adverse biological reactions to the use of resin-based restoratives in European dental schools was found to be limited.

CONCLUSIONS

Notwithstanding the variation in the response from the four geographic regions investigated and the relatively low overall response to the questionnaire, it is concluded that the data reported indicates that most dental schools in Europe teach the use of composites in selected Class I and Class II situations. However, considerable variation exists both within and between the regions investigated in relation to this teaching. Further research and consensus conferences should be planned to reduce variability across Europe in relation to the contraindications and techniques taught for posterior composites.

Dental materials: 1997 literature review

This review of the published literature on dental materials for the year 1997 has been compiled by the Dental Materials Panel of UK. It continues a series of annual reviews started in 1973. Emphasis has been placed upon publications, which report upon the materials science or clinical performance of the materials. The review has been divided by accepted materials classifications (fissure sealants, glass polyalkenoate cements, dentine bonding, dental amalgam, endodontic materials, casting alloys, ceramometallic restorations and resin-bonded bridges, ceramics, denture base resins and soft lining materials, impression materials, dental implant materials, orthodontic materials, biomechanics and image processing, resin composites, and casting investment materials and waxes). Three hundred and thirty three articles have been reviewed.

The impact of the ART approach on the treatment profile in a mobile dental system (MDS) in South Africa

The changing profile of oral care rendered through the Mobile Dental System (MDS), after the introduction of the Atraumatic Restorative Treatment (ART) approach is described. During the first year of introduction of ART, the percentages of amalgam restorations and tooth extractions decreased significantly (P < 0.0001). This is partly ascribed to a change in choice of treatment by dental operators in favour of ART and also due to an increase in acceptance by patients because of the reduced fear, and the patient-friendly nature of the ART approach. The reduction in amalgam restorations was 16.0 per cent for permanent and 1.4 per cent for primary posterior teeth. Extraction of posterior teeth was reduced by 17.4 per cent in the permanent and 35.7 per cent in the primary dentitions. The restorative component of oral care increased by 33.4 per cent in the permanent and 37.1 per cent in primary posterior teeth. The one-year survival of one-surface ART restorations using Fuji IX and KetacMolar was 93.6 per cent. Full and partial (more than 90 per cent) retention of the sealant part of the ART restoration was obtained in 75 per cent of the cases after one-year. During the one-year period, infection control was made more simple and this facilitated easier maintenance of mobile dental equipment. The introduction of the ART approach reduced extraction, restored more teeth and made oral care in the MDS more preventive, less threatening and thus more patient-friendly.

Current materials and techniques for direct restorations in posterior teeth. Part 2: Resin composite systems

This paper, the second in a two-part review of direct materials and techniques for intracoronal restorations in posterior teeth, deals with resin composite systems. Based on a consensus view on appropriate applications for composites in posterior teeth, consideration is given to the selection of composite systems, indications for posterior composites in different populations, principles for cavity preparation, placement techniques, clinical performance and the use of posterior composites in the context of the changing pattern of dental disease and the need to expand existing knowledge. It is concluded that posterior composites have a place in everyday clinical practice, albeit relatively limited and that the time has come to actively pursue and realise the opportunities afforded by these materials.

Dental materials citations: Part A, January to June 1997

OBJECTIVE

A search was conducted in biomedical journals published from January 1997 to June 1997 to identify all dental materials publications and sort them into major categories.

METHODS

Tables of contents for 79 journals for the period of January to June, 1997 were inspected and divided into 17 categories. Citations were analyzed by both frequency in journals and in categories, as well as compared to frequencies for previous years.

RESULTS

A total of 445 citations were detected in 79 journals for the period January 1997 to June 1997. Certain journals (n = 19) demonstrated a higher citation frequency (> or = 10 citations for 6 months) and represented 77.8% of all citations. The greatest number of citations continued to involve bonding (n = 97), resin-based restorative materials (composites; glass ionomers) (n = 95), prosthodontic materials (n = 51), and pulp protection/luting materials (n = 48). Frequencies by category were very similar to those for the last four years.

SIGNIFICANCE

The compiled literature citations provide a supplement for researchers and academicians seeking information in existing electronic databases.