MICROBIOLOGICAL ASPECTS OF SPONTANEOUS WORT FERMENTATION IN THE PRODUCTION OF LAMBIC AND GUEUZE

Refermentation and maturation of lambic beer in bottles: a necessary step for gueuze production

The production of gueuze beers through refermentation and maturation of blends of lambic beer in bottles is a way for lambic brewers to cope with the variability among different lambic beer batches. The resulting gueuze beers are more carbonated than lambic beers and are supposed to possess a unique flavor profile that varies over time. To map this refermentation and maturation process for gueuze production, a blend of lambic beers was made and bottled, whereby one of them was produced with the old wheat landrace Zeeuwse Witte. Through the use of matrix-assisted laser desorption/ionization time-of-flight mass spectrometry and high-throughput sequencing of bacterial and fungal amplicons, in combination with metabolite target analysis, new insights into gueuze production were obtained. During the initial stages of refermentation, the conditions in the bottles were similar to those encountered during the maturation phase of lambic beer productions in wooden barrels, which was also reflected microbiologically (presence of Brettanomyces species, Pediococcus damnosus, and Acetobacter lambici) and biochemically (ethanol, higher alcohols, lactic acid, acetic acid, volatile phenolic compounds, and ethyl esters). However, after a few weeks of maturation, a switch from a favorable environment to one with nutrient and dissolved oxygen depletion resulted in several changes. Concerning the microbiology, a sequential prevalence of three lactic acid bacterial species occurred, namely, P. damnosus, Lentilactobacillus buchneri, and Lactobacillus acetotolerans, while the diversity of the yeasts decreased. Concerning the metabolites produced, mainly those of the Brettanomyces yeasts determined the metabolic profiles encountered during later stages of the gueuze production.IMPORTANCEGueuze beers are the result of a refermentation and maturation process of a blend of lambic beers carried out in bottles. These gueuze beers are known to have a long shelf life, and their quality typically varies over time. However, knowledge about gueuze production in bottles is scarce. The present study provided more insights into the varying microbial and metabolite composition of gueuze beers during the first 2 years of this refermentation and maturation process. This will allow gueuze producers to gain more information about the influence of the refermentation and maturation time on their beers. These insights can also be used by gueuze producers to better inform their customers about the quality of young and old gueuze beers.

The potential for Scotch Malt Whisky flavour diversification by yeast

Scotch Whisky, a product of high importance to Scotland, has gained global approval for its distinctive qualities derived from the traditional production process, which is defined in law. However, ongoing research continuously enhances Scotch Whisky production and is fostering a diversification of flavour profiles. To be classified as Scotch Whisky, the final spirit needs to retain the aroma and taste of 'Scotch'. While each production step contributes significantly to whisky flavour-from malt preparation and mashing to fermentation, distillation, and maturation-the impact of yeast during fermentation is crucially important. Not only does the yeast convert the sugar to alcohol, it also produces important volatile compounds, e.g. esters and higher alcohols, that contribute to the final flavour profile of whisky. The yeast chosen for whisky fermentations can significantly influence whisky flavour, so the yeast strain employed is of high importance. This review explores the role of yeast in Scotch Whisky production and its influence on flavour diversification. Furthermore, an extensive examination of nonconventional yeasts employed in brewing and winemaking is undertaken to assess their potential suitability for adoption as Scotch Whisky yeast strains, followed by a review of methods for evaluating new yeast strains.

Study of a First Approach to the Controlled Fermentation for Lambic Beer Production

Non-Saccharomyces yeasts represent a great source of biodiversity for the production of new beer styles, since they can be used in different industrial areas, as pure culture starters, in co-fermentation with Saccharomyces, and in spontaneous fermentation (lambic and gueuze production, with the main contribution of Brettanomyces yeast). The fermentation process of lambic beer is characterized by different phases with a characteristic predominance of different microorganisms in each of them. As it is a spontaneous process, fermentation usually lasts from 10 months to 3 years. In this work, an attempt was made to perform a fermentation similar to the one that occurred in this process with lactic bacteria, Saccharomyces yeast and Brettanomyces yeast, but controlling their inoculation and therefore decreasing the time necessary for their action. For this purpose, after the first screening in 100 mL where eight Brettanomyces yeast strains from D.O. "Ribeira Sacra" (Galicia) were tested, one Brettanomyces bruxellensis strain was finally selected (B6) for fermentation in 1 L together with commercial strains of Saccharomyces cerevisiae S-04 yeast and Lactobacillus brevis lactic acid bacteria in different sequences. The combinations that showed the best fermentative capacity were tested in 14 L. Volatile compounds, lactic acid, acetic acid, colour, bitterness, residual sugars, ethanol, melatonin and antioxidant capacity were analysed at different maturation times of 1, 2, 6 and 12 months. Beers inoculated with Brettanomyces yeast independently of the other microorganisms showed pronounced aromas characteristic of the Brettanomyces yeast. Maturation after 12 months showed balanced beers with "Brett" aromas, as well as an increase in the antioxidant capacity of the beers.

New insights into the role of key microorganisms and wooden barrels during lambic beer fermentation and maturation

Belgian lambic beers are still produced through traditional craftsmanship. They rely on a spontaneous fermentation and maturation process that is entirely carried out in wooden barrels. The latter are used repetitively and may introduce some batch-to-batch variability. The present systematic and multiphasic study dealt with two parallel lambic beer productions carried out in nearly identical wooden barrels making use of the same cooled wort. It encompassed a microbiological and metabolomic approach. Further, a taxonomic classification and metagenome-assembled genome (MAG) investigation was based on shotgun metagenomics. These investigations provided new insights into the role of these wooden barrels and key microorganisms for this process. Indeed, besides their role in traditionality, the wooden barrels likely helped in establishing the stable microbial ecosystem of lambic beer fermentation and maturation by acting as an inoculation source of the necessary microorganisms, thereby minimizing batch-to-batch variations. They further provided a microaerobic environment, which aided in achieving the desirable succession of the different microbial communities for a successful lambic beer production process. Moreover, these conditions prevented excessive growth of acetic acid bacteria and, therefore, uncontrolled production of acetic acid and acetoin, which may lead to flavor deviations in lambic beer. Concerning the role of less studied key microorganisms for lambic beer production, it was shown that the Acetobacter lambici MAG contained several acid tolerance mechanisms toward the harsh environment of maturing lambic beer, whereas genes related to sucrose and maltose/maltooligosaccharide consumption and the glyoxylate shunt were absent. Further, a Pediococcus damnosus MAG possessed a gene encoding ferulic acid decarboxylase, possibly contributing to 4-vinyl compound production, as well as several genes, likely plasmid-based, related to hop resistance and biogenic amine production. Finally, contigs related to Dekkera bruxellensis and Brettanomyces custersianus did not possess genes involved in glycerol production, emphasizing the need for alternative external electron acceptors for redox balancing.

Comparison Review of the Production, Microbiology, and Sensory Profile of Lambic and American Coolship Ales

Sour beers have been traditionally brewed with spontaneous fermentation. This has been occurring in Belgium for hundreds of years, and more recently in the United States as the American craft beer industry has boomed. Belgian sour styles include lambics, which are mirrored in a burgeoning style called the American coolship ale (ACA). American beers have much more creative leeway than their Belgian counterparts, as American craft brewing tends to incorporate more contemporary techniques and ingredients than their traditional European forebears. This review paper will summarize the history, production methods, fermentation, microbiological profiles, and sensory profiles of Belgian lambics and American coolship ales.

Storage time and temperature affect microbial dynamics of yeasts and acetic acid bacteria in a kombucha beverage

Kombucha is a mildly sweet, slightly acidic fermented beverage, commercially available worldwide, that has attracted increasing consumers' interest due to its potential health benefits. Kombucha is commonly prepared using sugared black or green tea, but also other plant substrates are frequently utilised. Kombucha is obtained by fermentation using a symbiotic culture of bacteria and yeasts, whose composition varies depending on inoculum origin, plant substrates and environmental conditions. After fermentation, kombucha drinks are usually refrigerated at 4 °C, in order to maintain their biological and functional properties. There are no reports on the fate of microbial communities of kombucha in relation to long-term storage time and temperature. Here, for the first time, we monitored the diversity and dynamics of the microbial communities of a kombucha beverage fermented with different herbs during storage at 4 °C and at room temperature, for a period of 90 days, utilising culture-dependent and independent approaches. Moreover, cultivable yeasts and acetic acid bacteria (AAB) were isolated from the beverage, inoculated in pure culture, identified by molecular methods, and yeasts assessed for their functional properties. Total yeast counts were not affected by storage temperature and time, although their community composition changed, as Saccharomyces species significantly decreased after 45 days of storage at room temperature, completely disappearing after 90 days. On the other hand, Dekkera anomala (Brettanomyces anomalus), representing 52 % of the yeast isolates, remained viable up to 90 days at both storage temperatures, and was able to produce high levels of organic acids and exopolysaccharides. Data from DGGE (Denaturing Gradient Gel Electrophoresis) band sequencing confirmed that it was the dominant yeast species in all samples across storage. Other yeast isolates were represented by Saccharomyces and Zygosaccharomyces species. Among AAB, Gluconobacter oxydans, Novacetimonas hansenii and Komagataeibacter saccharivorans represented 46, 36 and 18 % of the isolates, whose occurrence remained unchanged across storage at 4 °C and did not vary up to 20 days of storage at room temperature. This work showed that the combination of culture-dependent and independent approaches is important for obtaining a complete picture of the distinctive core microbial community in kombucha beverages during storage, elucidating its diversity and composition, and preliminary characterizing yeast strains with putative functional activities.

Identification of spoilage microflora in draught beer using culture-dependent methods

AIMS

To determine whether the culture-dependent spoilage microflora found in draught beer are influenced by beer style.

METHODS AND RESULTS

Four beer styles - lager, ale, stout, and cask ale - were sampled twice from five different public houses (accounts) in four different locations. The microbiological quality of the dispensed beers was determined by a culture-dependent method ('forcing'), measuring the increase in turbidity after incubation at 30°C. The quality of draught beer varied from 'excellent' to 'poor' with cask beer samples having a higher Quality Index (90%) with keg ale the lowest (67.5%). With PCR amplified DNA (ITS1, ITS4, 16S rRNA primers) and BLAST identification of microflora, 386 colonies from agar plates were identified with 28 different microorganisms from five genera of yeast and six of bacteria. Seven microorganisms were found in all beer styles with Brettanomyces bruxellensis, B. anomalus and Acetobacter fabarum representing 53% of the identified microorganisms. A subsequent, limited study using PALL multiplex PCR GeneDisc technology on forced samples (without selection on plates) suggests that draught beer microflora is qualitatively broader. It is noteworthy that the microflora of spoilt draught beer resembles that involved in the production of Belgian Lambic sour beers.

CONCLUSIONS

Draught beer was of variable quality. Culture-dependent analysis suggests that species of Brettanomyces and Acetobacter are core microflora with some microorganisms being associated with beer style.

SIGNIFICANCE AND IMPACT OF THE STUDY

The microbiological quality of draught beer is important both commercially and to the Consumer. Here, we report the core and diverse microflora found in different styles of draught beer using culture-dependent methods.

Acetic Acid Bacteria in Sour Beer Production: Friend or Foe?

Beer is the result of a multistep brewing process, including a fermentation step using in general one specific yeast strain. Bacterial presence during beer production (or presence in the beer itself) is considered as bad, since bacteria cause spoilage, produce off-flavors, and/or turbidity. Although most problems in the past related to lack of hygiene and/or cleaning, bacteria do still cause problems nowadays. Despite this negative imago, certain bacteria play an irreplaceable role during fermentation and/or maturation of more unique, funky, and especially refreshing sour beers. The term sour beers or sours is not restricted to one definition but covers a wide variety of beers produced via different techniques. This review proposes an uncluttered sour beer classification scheme, which includes all sour beer production techniques and pays special attention to the functional role of acetic acid bacteria. Whereas their oxidation of ethanol and lactate into acetic acid and acetoin usually spoils beer, including sour beers, organoleptically, a controlled growth leads to a desirable acidic flavor in sour beers, such as lambic-style, lambic-based, and red-brown acidic ales.

Metabolomics of Non-Saccharomyces Yeasts in Fermented Beverages

Fermented beverages have been consumed for millennia and today support a global industry producing diverse products. Saccharomyces yeasts currently dominate the fermented beverage industry, but consumer demands for alternative products with a variety of sensory profiles and actual or perceived health benefits are driving the diversification and use of non-Saccharomyces yeasts. The diversity of flavours, aromas, and other sensory characteristics that can be obtained by using non-Saccharomyces yeasts in fermentation is, in large part, due to the diverse secondary metabolites they produce compared to conventional Saccharomyces yeast. Here, we review the use of metabolomic analyses of non-Saccharomyces yeasts to explore their impact on the sensory characteristics of fermented beverages. We highlight several key species currently used in the industry, including Brettanomyces, Torulaspora, Lachancea, and Saccharomycodes, and emphasize the future potential for the use of non-Saccharomyces yeasts in the production of diverse fermented beverages.

Maltose-Negative Yeast in Non-Alcoholic and Low-Alcoholic Beer Production

Although beer is a widely used beverage in many cultures, there is a need for a new drinking alternative in the face of rising issues such as health concerns or weight problems. However, non-alcoholic and low-alcoholic beers (NABLAB) still have some sensory problems that have not been fully remedied today, such as “wort-like”/”potato-like” flavours or a lack of aroma. These defects are due to the lack of alcohol (and the lack of the aldehyde-reducing effect of alcohol fermentation), as well as production techniques. The use of new yeast strains that cannot ferment maltose—the foremost sugar in the wort—is highly promising to produce a more palatable and sustainable NABLAB product because production with these yeast strains can be performed with standard brewery equipment. In the scientific literature, it is clear that interest in the production of NABLAB has increased recently, and experiments have been carried out with maltose-negative yeast strains isolated from many different environments. This study describes maltose-negative yeasts and their aromatic potential for the production of NABLAB by comprehensively examining recent academic studies.

Brettanomyces bruxellensis: Overview of the genetic and phenotypic diversity of an anthropized yeast

Human-associated microorganisms are ideal models to study the impact of environmental changes on species evolution and adaptation because of their small genome, short generation time, and their colonization of contrasting and ever-changing ecological niches. The yeast Brettanomyces bruxellensis is a good example of organism facing anthropogenic-driven selective pressures. It is associated with fermentation processes in which it can be considered either as a spoiler (e.g. winemaking, bioethanol production) or as a beneficial microorganism (e.g. production of specific beers, kombucha). Besides its industrial interests, noteworthy parallels and dichotomies with Saccharomyces cerevisiae propelled B. bruxellensis as a valuable complementary yeast model. In this review, we emphasize that the broad genetic and phenotypic diversity of this species is only beginning to be uncovered. Population genomic studies have revealed the co-existence of auto- and allotriploidization events with different evolutionary outcomes. The different diploid, autotriploid and allotriploid subpopulations are associated with specific fermented processes, suggesting independent adaptation events to anthropized environments. Phenotypically, B. bruxellensis is renowned for its ability to metabolize a wide variety of carbon and nitrogen sources, which may explain its ability to colonize already fermented environments showing low-nutrient contents. Several traits of interest could be related to adaptation to human activities (e.g. nitrate metabolization in bioethanol production, resistance to sulphite treatments in winemaking). However, phenotypic traits are insufficiently studied in view of the great genomic diversity of the species. Future work will have to take into account strains of varied substrates, geographical origins as well as displaying different ploidy levels to improve our understanding of an anthropized yeast's phenotypic landscape.

Draft Genome Sequence of Lactiplantibacillus plantarum NMZ-1139, Isolated from Whisky Mash

Lactiplantibacillus plantarum NMZ-1139 was isolated from whisky mash and applied to sour beer production. Here, we report the draft genome sequence of L. plantarum NMZ-1139, which contains 3,117 protein-coding sequences, including genes associated with hop resistance, such as horA and hitA.

Temporal Shotgun Metagenomics Revealed the Potential Metabolic Capabilities of Specific Microorganisms During Lambic Beer Production

Lambic beer production processes are characterized by a temporal succession of well-adapted microbial species. Temporal metagenomic analysis of a Belgian, traditional, lambic beer production process, which was examined microbiologically and metabolomically before, confirmed that the microbial diversity is limited. Moreover, it allowed to link the consumption and production of certain compounds to specific microbial groups or species. Fermentation characteristics, such as the conversion of malic acid into lactic acid and acetoin production, were retrieved and could be attributed to specific microorganisms, namely Pediococcus damnosus and Acetobacter species, respectively. Traits previously ascribed to brewery-specific Dekkera bruxellensis strains were confirmed during the lambic beer production process examined multiphasically; in particular, the higher production of 4-ethylguaiacol compared to 4-ethylphenol was further shown by mass spectrometric analysis. Moreover, the absence of phenolic acid decarboxylase in Brettanomyces custersianus was shown culture-independently and could explain its late occurrence during the maturation phase. Furthermore, the potential of maltooligosaccharide degradation could be ascribed metagenomically to not only Brettanomyces species but also Saccharomyces kudriavzevii, possibly explaining their degradation early in the lambic beer production process. Also, acetic acid bacteria (AAB) seemed to be able to consume maltooligosaccharides via their conversion into trehalose. Furthermore, these AAB possessed esterase genes, potentially capable of forming ethyl acetate, which may contribute to the flavor of lambic beer. Improved knowledge on the reasons behind certain community dynamics and the role of the different microorganisms in terms of potential functionality could improve brewery practices to assure to produce more quality-stable end-products.

Microbial Dynamics in Traditional and Modern Sour Beer Production

Traditional sour beers are produced by spontaneous fermentations involving numerous yeast and bacterial species. One of the traits that separates sour beers from ales and lagers is the high concentration of organic acids such as lactic acid and acetic acid, which results in reduced pH and increased acidic taste. Several challenges complicate the production of sour beers through traditional methods. These include poor process control, lack of consistency in product quality, and lengthy fermentation times. This review summarizes the methods for traditional sour beer production with a focus on the use of lactobacilli to generate this beverage. In addition, the review describes the use of selected pure cultures of microorganisms with desirable properties in conjunction with careful application of processing steps. Together, this facilitates the production of sour beer with a higher level of process control and more rapid fermentation compared to traditional methods.

Analysis of Lambic Beer Volatiles during Aging Using Gas Chromatography–Mass Spectrometry (GCMS) and Gas Chromatography–Olfactometry (GCO)

Lambic beer is produced using spontaneous fermentation. Gueuze is a style of lambic beer that blends “young” (1 year old) and “aged” (2+ years old) beers. Little is known about the development of volatile aroma compounds in lambic beer during aging. Solid-phase microextraction and gas chromatography–mass spectrometry were used to analyze volatile compounds from 3, 6, 9, 12, and 28-month-old commercial samples of lambic beer. Compounds were identified using standardized retention time and mass spectra of standards. Gas chromatography–olfactometry was used to characterize the aroma profiles of the samples. A total of 41 compounds were identified using gas chromatography–mass spectrometry (GC–MS). Ethyl lactate, ethyl acetate, 4-ethylphenol and 4-ethylguaiacol were identified in the 9, 12, and 28-month old samples. These four compounds have been linked to the microorganism Brettanomyces. Twenty-one aroma active compounds were identified using Gas chromatography–olfactometry (GC–O). As the age of the gueuze samples increased, a larger number of aroma compounds were identified by the panelists; the compounds identified increased from seven for the 3-month-old samples to nine for the 6-month-old samples, and eleven for both the nine and twelve-month-old samples, and seventeen for the twenty-eight-month-old samples.

New genome assemblies reveal patterns of domestication and adaptation across Brettanomyces (Dekkera) species

Background

Yeasts of the genus Brettanomyces are of significant interest, both for their capacity to spoil, as well as their potential to positively contribute to different industrial fermentations. However, considerable variance exists in the depth of research and knowledgebase of the five currently known species of Brettanomyces. For instance, Brettanomyces bruxellensis has been heavily studied and many resources are available for this species, whereas Brettanomyces nanus is rarely studied and lacks a publicly available genome assembly altogether. The purpose of this study is to fill this knowledge gap and explore the genomic adaptations that have shaped the evolution of this genus.

Results

Strains for each of the five widely accepted species of Brettanomyces (Brettanomyces anomalus, B. bruxellensis, Brettanomyces custersianus, Brettanomyces naardenensis, and B. nanus) were sequenced using a combination of long- and short-read sequencing technologies. Highly contiguous assemblies were produced for each species. Structural differences between the species’ genomes were observed with gene expansions in fermentation-relevant genes (particularly in B. bruxellensis and B. nanus) identified. Numerous horizontal gene transfer (HGT) events in all Brettanomyces species’, including an HGT event that is probably responsible for allowing B. bruxellensis and B. anomalus to utilize sucrose were also observed.

Conclusions

Genomic adaptations and some evidence of domestication that have taken place in Brettanomyces are outlined. These new genome assemblies form a valuable resource for future research in Brettanomyces.

Co-fermentation Involving Saccharomyces cerevisiae and Lactobacillus Species Tolerant to Brewing-Related Stress Factors for Controlled and Rapid Production of Sour Beer

Increasing popularity of sour beer urges the development of novel solutions for controlled fermentations both for fast acidification and consistency in product flavor and quality. One possible approach is the use of Saccharomyces cerevisiae in co-fermentation with Lactobacillus species, which produce lactic acid as a major end-product of carbohydrate catabolism. The ability of lactobacilli to ferment beer is determined by their capacity to sustain brewing-related stresses, including hop iso-α acids, low pH and ethanol. Here, we evaluated the tolerance of Lactobacillus brevis BSO464 and Lactobacillus buchneri CD034 to beer conditions and different fermentation strategies as well as their use in the brewing process in mixed fermentation with a brewer's yeast, S. cerevisiae US-05. Results were compared with those obtained with a commercial Lactobacillus plantarum (WildBrewTM Sour Pitch), a strain commonly used for kettle souring. In pure cultures, the three strains showed varying susceptibility to stresses, with L. brevis being the most resistant and L. plantarum displaying the lowest stress tolerance. When in co-fermentation with S. cerevisiae, both L. plantarum and L. brevis were able to generate sour beer in as little as 21 days, and their presence positively influenced the composition of flavor-active compounds. Both sour beers were sensorially different from each other and from a reference beer fermented by S. cerevisiae alone. While the beer produced with L. plantarum had an increased intensity in fruity odor and dried fruit odor, the L. brevis beer had a higher total flavor intensity, acidic taste and astringency. Remarkably, the beer generated with L. brevis was perceived as comparable to a commercial sour beer in multiple sensory attributes. Taken together, this study demonstrates the feasibility of using L. brevis BSO464 and L. plantarum in co-fermentation with S. cerevisiae for controlled sour beer production with shortened production time.

Chromosomal genome assembly of the ethanol production strain CBS 11270 indicates a highly dynamic genome structure in the yeast species Brettanomyces bruxellensis

Here, we present the genome of the industrial ethanol production strain Brettanomyces bruxellensis CBS 11270. The nuclear genome was found to be diploid, containing four chromosomes with sizes of ranging from 2.2 to 4.0 Mbp. A 75 Kbp mitochondrial genome was also identified. Comparing the homologous chromosomes, we detected that 0.32% of nucleotides were polymorphic, i.e. formed single nucleotide polymorphisms (SNPs), 40.6% of them were found in coding regions (i.e. 0.13% of all nucleotides formed SNPs and were in coding regions). In addition, 8,538 indels were found. The total number of protein coding genes was 4897, of them, 4,284 were annotated on chromosomes; and the mitochondrial genome contained 18 protein coding genes. Additionally, 595 genes, which were annotated, were on contigs not associated with chromosomes. A number of genes was duplicated, most of them as tandem repeats, including a six-gene cluster located on chromosome 3. There were also examples of interchromosomal gene duplications, including a duplication of a six-gene cluster, which was found on both chromosomes 1 and 4. Gene copy number analysis suggested loss of heterozygosity for 372 genes. This may reflect adaptation to relatively harsh but constant conditions of continuous fermentation. Analysis of gene topology showed that most of these losses occurred in clusters of more than one gene, the largest cluster comprising 33 genes. Comparative analysis against the wine isolate CBS 2499 revealed 88,534 SNPs and 8,133 indels. Moreover, when the scaffolds of the CBS 2499 genome assembly were aligned against the chromosomes of CBS 11270, many of them aligned completely, some have chunks aligned to different chromosomes, and some were in fact rearranged. Our findings indicate a highly dynamic genome within the species B. bruxellensis and a tendency towards reduction of gene number in long-term continuous cultivation.

Microbial acidification, alcoholization, and aroma production during spontaneous lambic beer production

Acidic beers, such as Belgian lambic beers and American and other coolship ales, are becoming increasingly popular worldwide thanks to their refreshing acidity and fruity notes. The traditional fermentation used to produce them does not apply pure yeast cultures but relies on spontaneous, environmental inoculation. The fermentation and maturation process is carried out in wooden barrels and can take up to three years. It is characterized by different microbial species belonging to the enterobacteria, acetic acid bacteria, lactic acid bacteria, and yeasts. This review provides an introduction to the technology and four fermentation strategies of beer production, followed by the microbiology of acidic beer production, focusing on the main microorganisms present during the long process used for the production of Belgian lambic beers. © 2018 Society of Chemical Industry.

The Interior Surfaces of Wooden Barrels Are an Additional Microbial Inoculation Source for Lambic Beer Production

Traditional lambic beer production takes place through wort inoculation with environmental air and fermentation and maturation in wooden barrels. These wooden casks or foeders are possible additional inoculation sources of microorganisms for lambic worts. To date, however, these lambic barrels have been examined only with culture-dependent techniques, thereby missing a portion of the microorganisms present. Moreover, the effects of the cleaning procedures (involving high-pressure water and/or fumigation) and the barrel type on the microbial community structures of the interior surfaces of wooden lambic barrels were unclear. The culture-dependent plating and culture-independent amplicon sequencing of swab samples obtained from the interior surfaces of different wooden casks and foeders used for traditional lambic beer production in Belgium revealed that the microbial compositions of these surfaces differed statistically throughout the barrel-cleaning procedures applied. At the end of the cleaning procedures, amplicon sequencing still detected fermentation- and maturation-related microorganisms, although only a few colonies were still detectable using culture-dependent methods. It is possible that some of the surviving microorganisms were missed due to the presence of many of these cells in a viable but not culturable state and/or engrained deeper in the wood. These surviving microorganisms could act as an additional inoculation source, besides brewery air and brewery equipment, thereby helping to establish a stable microbial community in the wort to diminish batch-to-batch variations in fermentation profiles. Furthermore, the microbial compositions of the interior barrel surfaces differed statistically based on the barrel type, possibly reflecting different characteristics of the lambic barrels in terms of age, wood thickness, and wood porosity.IMPORTANCE Although the coolship step is generally regarded as the main contributor to the spontaneous inoculation by environmental air of fresh worts for lambic beer production, it is known that microorganisms often associate with specific surfaces present in a brewery. However, knowledge about the association of microorganisms with the interior surfaces of wooden lambic barrels is limited. To clarify the role of casks and foeders as additional microbial inoculation sources, it was important to determine the influence of the barrel characteristics and the cleaning procedures on the microbial communities of the interior barrel surfaces. Moreover, this helped to elucidate the complex spontaneous lambic beer fermentation and maturation process. It will allow further optimization of the lambic beer production process, as well as the wooden-barrel-cleaning procedures applied.

Wort Substrate Consumption and Metabolite Production During Lambic Beer Fermentation and Maturation Explain the Successive Growth of Specific Bacterial and Yeast Species

The present study combined high-throughput culture-dependent plating and culture-independent amplicon sequencing with a metabolite target analysis to systematically dissect the identity, evolution, and role of the microorganisms, substrates, and metabolites during the four-phase fermentation and maturation process of lambic beer production. This led to the following new insights. The changing physicochemical parameters and substrate and metabolite compositions of the fermenting wort and maturing lambic beer provoked several transitions between microbial species and explained the four-step production process. Manual wort acidification with lactic acid shortened the enterobacterial phase and thus kept biogenic amine formation by enterobacteria present during the early stages of fermentation at a minimum. Growth advantages during the alcoholic fermentation phase caused a transition from the prevalence by Hanseniaspora uvarum and Kazachstania species to that by Saccharomyces cerevisiae and later on Saccharomyces kudriavzevii, due to changing environmental parameters. During the acidification phase, Pediococcus damnosus was prevalent and performed a malolactic fermentation. Acetobacter pasteurianus produced acetic acid and acetoin. Upon maturation, Dekkera species appeared, together with P. damnosus and Pichia membranifaciens, thereby contributing to acetic acid production, depending on the oxygen availability. Moreover, the Dekkera species consumed the acetoin produced by the acetic acid bacteria for redox balancing. The breakdown of maltooligosaccharides seemed to be independent of the occurrence of Dekkera species and started already early in the fermentation process.

Temporal and Spatial Distribution of the Acetic Acid Bacterium Communities throughout the Wooden Casks Used for the Fermentation and Maturation of Lambic Beer Underlines Their Functional Role

Few data have been published on the occurrence and functional role of acetic acid bacteria (AAB) in lambic beer production processes, mainly due to their difficult recovery and possibly unknown role. Therefore, a novel aseptic sampling method, spanning both the spatial and temporal distributions of the AAB and their substrates and metabolites, was combined with a highly selective medium and matrix-assisted laser desorption ionization-time of flight mass spectrometry (MALDI-TOF MS) as a high-throughput dereplication method followed by comparative gene sequencing for their isolation and identification, respectively. The AAB (Acetobacter species more than Gluconobacter species) proliferated during two phases of the lambic beer production process, represented by Acetobacter orientalis during a few days in the beginning of the fermentation and Acetobacter pasteurianus from 7 weeks until 24 months of maturation. Competitive exclusion tests combined with comparative genomic analysis of all genomes of strains of both species available disclosed possible reasons for this successive dominance. The spatial analysis revealed that significantly higher concentrations of acetic acid (from ethanol) and acetoin (from lactic acid) were produced at the tops of the casks, due to higher AAB counts and a higher metabolic activity of the AAB species at the air/liquid interface during the first 6 months of lambic beer production. In contrast, no differences in AAB species diversity occurred throughout the casks.IMPORTANCE Lambic beer is an acidic beer that is the result of a spontaneous fermentation and maturation process. Acidic beers are currently attracting attention worldwide. Part of the acidity of these beers is caused by acetic acid bacteria (AAB). However, due to their difficult recovery, they were never investigated extensively regarding their occurrence, species diversity, and functional role in lambic beer production. In the present study, a framework was developed for their isolation and identification using a novel aseptic sampling method in combination with matrix-assisted laser desorption ionization-time of flight mass spectrometry as a high-throughput dereplication technique followed by accurate molecular identification. The sampling method applied enabled us to take spatial differences into account regarding both enumerations and metabolite production. In this way, it was shown that more AAB were present and more acetic acid was produced at the air/liquid interface during a major part of the lambic beer production process. Also, two different AAB species were encountered, namely, Acetobacter orientalis at the beginning and Acetobacter pasteurianus in a later stage of the production process. This developed framework could also be applied for other fermentation processes.

Identification of a novel interspecific hybrid yeast from a metagenomic spontaneously inoculated beer sample using Hi-C

Interspecific hybridization is a common mechanism enabling genetic diversification and adaptation; however, the detection of hybrid species has been quite difficult. The identification of microbial hybrids is made even more complicated, as most environmental microbes are resistant to culturing and must be studied in their native mixed communities. We have previously adapted the chromosome conformation capture method Hi-C to the assembly of genomes from mixed populations. Here, we show the method's application in assembling genomes directly from an uncultured, mixed population from a spontaneously inoculated beer sample. Our assembly method has enabled us to de-convolute four bacterial and four yeast genomes from this sample, including a putative yeast hybrid. Downstream isolation and analysis of this hybrid confirmed its genome to consist of Pichia membranifaciens and that of another related, but undescribed, yeast. Our work shows that Hi-C-based metagenomic methods can overcome the limitation of traditional sequencing methods in studying complex mixtures of genomes. Copyright © 2017 John Wiley & Sons, Ltd.

Overview of craft brewing specificities and potentially associated microbiota

The brewing process differs slightly in craft breweries as compared to industrial breweries, as there are fewer control points. This affects the microbiota of the final product. Beer contains several antimicrobial properties that protect it from pathogens, such as low pH, low oxygen and high carbon dioxide content, and the addition of hops. However, these hurdles have limited power controlling spoilage organisms. Contamination by these organisms can originate in the raw materials, persist in the environment, and be introduced by using flavoring ingredients later in the process. Spoilage is a prominent issue in brewing, and can cause quality degradation resulting in consumer rejection and product waste. For example, lactic acid bacteria are predominately associated with producing a ropy texture and haze, along with producing diacetyl which gives the beer butter flavor notes. Other microorganisms may not affect flavor or aroma, but can retard fermentation by consuming nutrients needed by fermentation yeast. Quality control in craft breweries today relies on culturing methods to detect specific spoilage organisms. Using media can be beneficial for detecting the most common beer spoilers, such as Lactobacillus and Pediococci. However, these methods are time consuming with long incubation periods. Molecular methods such as community profiling or high throughput sequencing are better used for identifying entire populations of beer. These methods allow for detection, differentiation, and identification of taxa.

The genomics of microbial domestication in the fermented food environment

Shortly after the agricultural revolution, the domestication of bacteria, yeasts, and molds, played an essential role in enhancing the stability, quality, flavor, and texture of food products. These domestication events were probably the result of human food production practices that entailed the continual recycling of isolated microbial communities in the presence of abundant agricultural food sources. We suggest that within these novel agrarian food niches the metabolic requirements of those microbes became regular and predictable resulting in rapid genomic specialization through such mechanisms as pseudogenization, genome decay, interspecific hybridization, gene duplication, and horizontal gene transfer. The ultimate result was domesticated strains of microorganisms with enhanced fermentative capacities.

Dekkera bruxellensis--spoilage yeast with biotechnological potential, and a model for yeast evolution, physiology and competitiveness

Dekkera bruxellensis is a non-conventional yeast normally considered a spoilage organism in wine (off-flavours) and in the bioethanol industry. But it also has potential as production yeast. The species diverged from Saccharomyces cerevisiae 200 mya, before the whole genome duplication. However, it displays similar characteristics such as being Crabtree- and petite positive, and the ability to grow anaerobically. Partial increases in ploidy and promoter rewiring may have enabled evolution of the fermentative lifestyle in D. bruxellensis. On the other hand, it has genes typical for respiratory yeasts, such as for complex I or the alternative oxidase AOX1. Dekkera bruxellensis grows more slowly than S. cerevisiae, but produces similar or greater amounts of ethanol, and very low amounts of glycerol. Glycerol production represents a loss of energy but also functions as a redox sink for NADH formed during synthesis of amino acids and other compounds. Accordingly, anaerobic growth required addition of certain amino acids. In spite of its slow growth, D. bruxellensis outcompeted S. cerevisiae in glucose-limited cultures, indicating a more efficient energy metabolism and/or higher affinity for glucose. This review tries to summarize the latest discoveries about evolution, physiology and metabolism, and biotechnological potential of D. bruxellensis.

Brettanomyces yeasts--From spoilage organisms to valuable contributors to industrial fermentations

Ever since the introduction of controlled fermentation processes, alcoholic fermentations and Saccharomyces cerevisiae starter cultures proved to be a match made in heaven. The ability of S. cerevisiae to produce and withstand high ethanol concentrations, its pleasant flavour profile and the absence of health-threatening toxin production are only a few of the features that make it the ideal alcoholic fermentation organism. However, in certain conditions or for certain specific fermentation processes, the physiological boundaries of this species limit its applicability. Therefore, there is currently a strong interest in non-Saccharomyces (or non-conventional) yeasts with peculiar features able to replace or accompany S. cerevisiae in specific industrial fermentations. Brettanomyces (teleomorph: Dekkera), with Brettanomyces bruxellensis as the most commonly encountered representative, is such a yeast. Whilst currently mainly considered a spoilage organism responsible for off-flavour production in wine, cider or dairy products, an increasing number of authors report that in some cases, these yeasts can add beneficial (or at least interesting) aromas that increase the flavour complexity of fermented beverages, such as specialty beers. Moreover, its intriguing physiology, with its exceptional stress tolerance and peculiar carbon- and nitrogen metabolism, holds great potential for the production of bioethanol in continuous fermentors. This review summarizes the most notable metabolic features of Brettanomyces, briefly highlights recent insights in its genetic and genomic characteristics and discusses its applications in industrial fermentation processes, such as the production of beer, wine and bioethanol.

Comparative genome analysis of Pediococcus damnosus LMG 28219, a strain well-adapted to the beer environment

BACKGROUND

Pediococcus damnosus LMG 28219 is a lactic acid bacterium dominating the maturation phase of Flemish acid beer productions. It proved to be capable of growing in beer, thereby resisting this environment, which is unfavorable for microbial growth. The molecular mechanisms underlying its metabolic capabilities and niche adaptations were unknown up to now. In the present study, whole-genome sequencing and comparative genome analysis were used to investigate this strain's mechanisms to reside in the beer niche, with special focus on not only stress and hop resistances but also folate biosynthesis and exopolysaccharide (EPS) production.

RESULTS

The draft genome sequence of P. damnosus LMG 28219 harbored 183 contigs, including an intact prophage region and several coding sequences involved in plasmid replication. The annotation of 2178 coding sequences revealed the presence of many transporters and transcriptional regulators and several genes involved in oxidative stress response, hop resistance, de novo folate biosynthesis, and EPS production. Comparative genome analysis of P. damnosus LMG 28219 with Pediococcus claussenii ATCC BAA-344(T) (beer origin) and Pediococcus pentosaceus ATCC 25745 (plant origin) revealed that various hop resistance genes and genes involved in de novo folate biosynthesis were unique to the strains isolated from beer. This contrasted with the genes related to osmotic stress responses, which were shared between the strains compared. Furthermore, transcriptional regulators were enriched in the genomes of bacteria capable of growth in beer, suggesting that those cause rapid up- or down-regulation of gene expression.

CONCLUSIONS

Genome sequence analysis of P. damnosus LMG 28219 provided insights into the underlying mechanisms of its adaptation to the beer niche. The results presented will enable analysis of the transcriptome and proteome of P. damnosus LMG 28219, which will result in additional knowledge on its metabolic activities.

Mapping microbial ecosystems and spoilage-gene flow in breweries highlights patterns of contamination and resistance

Distinct microbial ecosystems have evolved to meet the challenges of indoor environments, shaping the microbial communities that interact most with modern human activities. Microbial transmission in food-processing facilities has an enormous impact on the qualities and healthfulness of foods, beneficially or detrimentally interacting with food products. To explore modes of microbial transmission and spoilage-gene frequency in a commercial food-production scenario, we profiled hop-resistance gene frequencies and bacterial and fungal communities in a brewery. We employed a Bayesian approach for predicting routes of contamination, revealing critical control points for microbial management. Physically mapping microbial populations over time illustrates patterns of dispersal and identifies potential contaminant reservoirs within this environment. Habitual exposure to beer is associated with increased abundance of spoilage genes, predicting greater contamination risk. Elucidating the genetic landscapes of indoor environments poses important practical implications for food-production systems and these concepts are translatable to other built environments.

DOI:http://dx.doi.org/10.7554/eLife.04634.001

Many microbes—including bacteria and fungi—can affect the food and drink we consume, for better and for worse. Some spoil food, making it less tasty or even harmful to health. However, microbes can also be important ingredients: for example, yeast ferments malted barley sugars to make the alcohol and flavor of beer.

Nowadays, many beers are made under carefully controlled conditions, where the only microbes in the beer should be the strain of yeast added to the barley sugars. A more traditional ‘coolship’ method can be used to make sour beers; the barley sugars cool in an open-topped vessel and are fermented by the yeast and bacteria found naturally on the raw ingredients and in the surrounding environment.

Relatively little was known about how microbes spread around and adapt to living inside buildings. Now, Bokulich et al. have used a range of molecular and statistical techniques to examine how bacteria and fungi are dispersed throughout a North American brewery that produces beer using both conventional and coolship brewing techniques. Most of the microbes found in the building originated from the raw ingredients used to make the beer, with different parts of the brewery containing different species. Over the course of a year, some species spread to new parts of the building; a statistical method predicted the sources of these microbes, and revealed some key areas and features of the brewery that affect microbial transfer.

Bokulich et al. also looked at the spread of genes that enable their bacterial hosts to spoil beer, including those that protect bacteria from the antimicrobial action of the hops that flavor many beers. Lactic acid bacteria are the main cause of beer spoilage and so are usually to be avoided in breweries, but are also a normal ingredient in sour beer. In the brewery Bokulich et al. investigated, beer-spoilage and hop-resistance genes were found throughout the brewery, even in areas not used to produce sour beer. However, little beer spoilage occurred.

The techniques used by Bokulich et al. to track the spread of microbes and their detrimental genes could be used in the future to understand how microbes adapt to other indoor environments. Indeed, Bokulich et al. suggest that breweries could be used as models to safely understand the factors that influence microbial movement in any food-production facility as well as other building environments.

DOI:http://dx.doi.org/10.7554/eLife.04634.002

The microbial diversity of traditional spontaneously fermented lambic beer

Lambic sour beers are the products of a spontaneous fermentation that lasts for one to three years before bottling. The present study determined the microbiota involved in the fermentation of lambic beers by sampling two fermentation batches during two years in the most traditional lambic brewery of Belgium, using culture-dependent and culture-independent methods. From 14 samples per fermentation, over 2000 bacterial and yeast isolates were obtained and identified. Although minor variations in the microbiota between casks and batches and a considerable species diversity were found, a characteristic microbial succession was identified. This succession started with a dominance of Enterobacteriaceae in the first month, which were replaced at 2 months by Pediococcus damnosus and Saccharomyces spp., the latter being replaced by Dekkera bruxellensis at 6 months fermentation duration.

Gluconobacter cerevisiae sp. nov., isolated from the brewery environment

Three strains, LMG 27748T, LMG 27749 and LMG 27882 with identical MALDI-TOF mass spectra were isolated from samples taken from the brewery environment. Analysis of the 16S rRNA gene sequence of strain LMG 27748T revealed that the taxon it represents was closely related to type strains of the species Gluconobacter albidus (100 % sequence similarity), Gluconobacter kondonii (99.9 %), Gluconobacter sphaericus (99.9 %) and Gluconobacter kanchanaburiensis (99.5 %). DNA–DNA hybridization experiments on the type strains of these species revealed moderate DNA relatedness values (39–65 %). The three strains used d-fructose, d-sorbitol, meso-erythritol, glycerol, l-sorbose, ethanol (weakly), sucrose and raffinose as a sole carbon source for growth (weak growth on the latter two carbon sources was obtained for strains LMG 27748T and LMG 27882). The strains were unable to grow on glucose-yeast extract medium at 37 °C. They produced acid from meso-erythritol and sucrose, but not from raffinose. d-Gluconic acid, 2-keto-d-gluconic acid and 5-keto-d-gluconic acid were produced from d-glucose, but not 2,5-diketo-d-gluconic acid. These genotypic and phenotypic characteristics distinguish strains LMG 27748T, LMG 27749 and LMG 27882 from species of the genus Gluconobacter with validly published names and, therefore, we propose classifying them formally as representatives of a novel species, Gluconobacter cerevisiae sp. nov., with LMG 27748T ( = DSM 27644T) as the type strain.