Detoxification of mycotoxins in agricultural products by non-thermal physical technologies: a review of the past five years

Mycotoxins produced by Aspergillus spp., Penicillium spp. and Fusarium spp. with small molecular weight and thermal stability, are highly toxic and carcinogenic secondary metabolites. Mycotoxins have caused widespread concern regarding food safety internationally because of their adverse effects on the health of humans and animals, and the major economic losses they cause. There is an urgent need to find ways to reduce or eliminate the impact of mycotoxins in food and feed without introducing new safety issues, or reducing nutritional quality. Non-thermal physical technology is the basis for new techniques to degrade mycotoxins, with great potential for practical detoxification applications in the food industry. Compared with conventional thermal treatments, non-thermal physical detoxification technologies are easier to apply and effective, with less adverse impact on the nutritional value of agricultural products. The advantages, limitations and development prospects of these new detoxification technologies are discussed. Further studies are recommended to standardize the treatment conditions for each detoxification technology, evaluate the safety of the degradation products, and to combine different detoxification technologies to achieve synergistic effects. This will facilitate realization of the great potential of the new technologies and the development of practical applications.

Peppermint essential oil and its nano-emulsion: Potential against aflatoxigenic fungus Aspergillus flavus in food and feed

A facultative parasite called Aspergillus flavus contaminates several important food crops before and after harvest. In addition, the pathogen that causes aspergillosis infections in humans and animals is opportunistic. Aflatoxin, a secondary metabolite produced by Aspergillus flavus, is also carcinogenic and mutagenic, endangering human and animal health and affecting global food security. Peppermint essential oils and plant-derived natural products have recently shown promise in combating A. flavus infestations and aflatoxin contamination. This review discusses the antifungal and anti-aflatoxigenic properties of peppermint essential oils. It then discusses how peppermint essential oils affect the growth of A. flavus and the biosynthesis of aflatoxins. Several cause physical, chemical, or biochemical changes to the cell wall, cell membrane, mitochondria, and associated metabolic enzymes and genes. Finally, the prospects for using peppermint essential oils and natural plant-derived chemicals to develop novel antifungal agents and protect foods are highlighted. In addition to reducing the risk of aspergillosis infection, this review highlights the significant potential of plant-derived natural products and peppermint essential oils to protect food and feed from aflatoxin contamination and A. flavus infestation.

Current physical techniques for the degradation of aflatoxins in food and feed: Safety evaluation methods, degradation mechanisms and products

Aflatoxins are the most toxic natural mycotoxins discovered so far, posing a serious menace to the food safety and trading economy of the world, especially developing countries. How to effectively detoxify has persistently occupied a place on the list of "global hot-point" concerns. Among the developed detoxification methods, physical methods, as the authoritative techniques for aflatoxins degradation, could rapidly induce irreversible denaturation of aflatoxins. This review presents a brief overview of aflatoxins detection and degradation product structure identification methods. Four main safety evaluation methods for aflatoxins and degradation product toxicity assessment are highlighted combined with an update on research of aflatoxins decontamination in the last decade. Furthermore, the latest applications, degradation mechanisms and products of physical aflatoxin decontamination techniques including microwave heating, irradiation, pulsed light, cold plasma and ultrasound are discussed in detail. Regulatory issues related to "detoxification" are also explained. Finally, we put forward the challenges and future work in studying aflatoxin degradation based on the existing research. The purpose of supplying this information is to help researchers have a deeper understanding on the degradation of aflatoxins, break through the existing bottleneck, and further improve and innovate the detoxification methods of aflatoxins.

Occurrence of aflatoxins in water and decontamination strategies: A review

Aflatoxins are highly carcinogenic metabolites produced by some Aspergillus species and are the most prevalent mycotoxins. Although aflatoxins are commonly synthesized during fungal colonization in preharvest maize, cereals, and nuts, they can be transported by rainfall to surface water and are a common toxin found in wastewater from some food industries. Here, the occurrence of aflatoxins in bodies of water is reviewed for the first time, along with the decontamination methods. Aflatoxins have been detected in surface, wastewater and drinking water, including tap and bottled water. The specific sources of water contamination remain unclear, which is an important gap that must be addressed in future research. Two main kinds of decontamination methods have been reported, including degradation and adsorption. The best degradation rates were observed using gamma and UV irradiations, oxidoreductases and ozone, while the best adsorption abilities were observed with minerals, polyvinyl alcohol, durian peel and activated carbon. Synthetic polymers could be used as membranes in pipes to remove aflatoxins in water flows. Although most decontamination methods were screened using AFB₁, the other commonly found aflatoxins were not used in the screenings. Overall, the occurrence of aflatoxins in water could be a significant emerging public health concern largely ignored by local and international legislation. Numerous advances have been reported for the decontamination of aflatoxins in water; however, there is still a long way to go to put them into practice.

Deoxynivalenol in food and feed: Recent advances in decontamination strategies

Deoxynivalenol (DON) is a mycotoxin that contaminates animal feed and crops around the world. DON not only causes significant economic losses, but can also lead diarrhea, vomiting, and gastroenteritis in humans and farm animals. Thus, there is an urgent need to find efficient approaches for DON decontamination in feed and food. However, physical and chemical treatment of DON may affect the nutrients, safety, and palatability of food. By contrast, biological detoxification methods based on microbial strains or enzymes have the advantages of high specificity, efficiency, and no secondary pollution. In this review, we comprehensively summarize the recently developed strategies for DON detoxification and classify their mechanisms. In addition, we identify remaining challenges in DON biodegradation and suggest research directions to address them. In the future, an in-depth understanding of the specific mechanisms through which DON is detoxified will provide an efficient, safe, and economical means for the removal of toxins from food and feed.

Transcriptomic analysis reveals the inhibition mechanism of pulsed light on fungal growth and ochratoxin A biosynthesis in Aspergillus carbonarius

Pulsed light (PL) technology has a good effect on the control of fungi in postharvest fruit. In this present work, PL inhibited the growth of Aspergillus carbonarius in a dose-dependent manner, the mycelial growth decreased by 4.83 %, 13.91 % and 30.01 % at a fluence of 4.5 J·cm^-2 (PL5), 9 J·cm^-2 (PL10) and 13.5 J·cm² (PL15), respectively. When inoculated with PL15 treated A. carbonarius, the scab diameter of the pears, ergosterol and OTA content was reduced by 23.2 %, 27.9 % and 80.7 % after 7 days, respectively. The third-generation sequencing technique was applied to study the transcriptome response of A. carbonarius treated with PL. Compared with the blank control, a total number of 268 and 963 differentially expressed genes (DEGs) were discovered in the group of PL10 and PL15, respectively. To be specific, a large amount of DEGs involved in DNA metabolism were up-regulated, while most of DEGs related to cell integrity, energy and glucose metabolism, ochratoxin A (OTA) biosynthesis and transport were down-regulated. In addition, the stress response of A. carbonarius was imbalanced, including up-regulation of Catalase and PEX12 and down-regulation of taurine and subtaurine metabolism, alcohol dehydrogenase and glutathione metabolism. Meanwhile, the results of transmission electron microscopy, mycelium cellular leakage and DNA electrophoresis indicated that PL15 treatment caused mitochondrial swelling, the destroyed cell membrane permeability and imbalance of DNA metabolism. The expression of P450 and Hal involved in OTA biosynthesis pathway were down-regulated in PL treated samples detected by qRT-PCR. In conclusion, this study reveals the molecular mechanism of pulsed light on inhibiting the growth, development and toxin production of A. carbonarius.

Bio-control on the contamination of Ochratoxin A in food: Current research and future prospects

Ochratoxin A (OTA) is a secondary metabolite of several fungi and widely exists in various species of foods. The establishment of effective methods for OTA reduction is a key measure to ensure food processing and human health. This article reviews the current research of OTA reduction by biological approaches, summarizes the characteristics and efficiency of them, and evaluates the transformation pathways and metabolites safety of each degradation technology. The shortcomings of various methods are pointed out and future prospects are also proposed. Biological methods are the most promising approaches for OTA control. The defect of them is the long processing time and the growth of microbial cells may affect the product quality. Therefore, the control of OTA contamination should be conducted according to the food processing and their product types. Besides, it is significant for the exploitation of new strains, enzyme and novel adsorbents.

Approaches to Inactivating Aflatoxins-A Review and Challenges

According to the World Health Organization, the contamination of crops with aflatoxins poses a significant economic burden, estimated to affect 25% of global food crops. In the event that the contaminated food is processed, aflatoxins enter the general food supply and can cause serious diseases. Aflatoxins are distributed unevenly in food or feedstock, making eradicating them both a scientific and a technological challenge. Cooking, freezing, or pressurizing have little effect on aflatoxins. While chemical methods degrade toxins on the surface of contaminated food, the destruction inside entails a slow process. Physical techniques, such as irradiation with ultraviolet photons, pulses of extensive white radiation, and gaseous plasma, are promising; yet, the exact mechanisms concerning how these techniques degrade aflatoxins require further study. Correlations between the efficiency of such degradation and the processing parameters used by various authors are presented in this review. The lack of appropriate guidance while interpreting the observed results is a huge scientific challenge.

Photoelectrocatalytic degradation of deoxynivalenol on CuO-Cu2O/WO3 ternary film: Mechanism and reaction pathways

A ternary film of CuO-Cu₂O/WO₃ possessing high visible-light photoelectrocatalytic (PEC) performance was prepared for degradation of deoxynivalenol (DON). In such a ternary film, the introduction of CuO-Cu₂O significantly promoted the absorption of WO₃ in the visible region and reduced the recombination of photogenerated charge carriers. As a result, the CuO-Cu₂O/WO₃ film exhibited high photoelectrochemical activity under visible light illumination. The PEC performance of CuO-Cu₂O/WO₃ film was evaluated by the decoloration of Rhodamine B. The result indicated that the CuO-Cu₂O/WO₃ film exhibited higher PEC activity than WO₃ or CuO-Cu₂O film. When the CuO-Cu₂O/WO₃ film was applied to study the removal of DON, the degradation efficiency reached 87.6% after 180-min PEC treatment. According to reactive oxygen species detected by electron spin resonance analysis, a Z-scheme and type-II PEC mechanism was proposed for this ternary film. Furthermore, the intermediates formed during the PEC degradation process of DON were separated by high-performance liquid chromatography and identified with liquid chromatography-mass spectrometry. On the basis of sixteen intermediate products identified, we proposed a degradation pathway for DON in such a PEC system.

Application of Novel Non-Thermal Physical Technologies to Degrade Mycotoxins

Mycotoxins cause adverse effects on human health. Therefore, it is of the utmost importance to confront them, particularly in agriculture and food systems. Non-thermal plasma, electron beam radiation, and pulsed light are possible novel non-thermal technologies offering promising results in degrading mycotoxins with potential for practical applications. In this paper, the available publications are reviewed-some of them report efficiency of more than 90%, sometimes almost 100%. The mechanisms of action, advantages, efficacy, limitations, and undesirable effects are reviewed and discussed. The first foretastes of plasma and electron beam application in the industry are in the developing stages, while pulsed light has not been employed in large-scale application yet.

Mechanisms of deoxynivalenol (DON) degradation during different treatments: a review

Deoxynivalenol (DON) is one of the main trichothecenes, that causes health-related issues in humans and animals and imposes considerable financial loss to the food industry each year. Numerous treatments have been reported in the literature on the degradation of DON in food products. These treatments include thermal, chemical, biological/enzymatic, irradiation, light, ultrasound, ozone, and atmospheric cold plasma treatments. Each of these methods has different degradation efficacy and degrades DON by a distinct mechanism, which leads to various degradation byproducts with different toxicity. This manuscript focuses to review the degradation of DON by the aforementioned treatments, the chemical structure and toxicity of the byproducts, and the degradation pathway of DON. Based on the type of treatment, DON can be degraded to norDONs A-F, DON lactones, and ozonolysis products or transformed into de-epoxy deoxynivalenol, DON-3-glucoside, 3-acetyl-DON, 7-acetyl-DON, 15-acetyl-DON, 3-keto-DON, or 3-epi-DON. DON is a major problem for the grain industry and the studies focusing on DON degradation mechanisms could be helpful to select the best method and overcome the DON contamination in grains.

Physical and Chemical Methods for Reduction in Aflatoxin Content of Feed and Food

Aflatoxins (AFs) are among the most harmful fungal secondary metabolites imposing serious health risks on both household animals and humans. The more frequent occurrence of aflatoxins in the feed and food chain is clearly foreseeable as a consequence of the extreme weather conditions recorded most recently worldwide. Furthermore, production parameters, such as unadjusted variety use and improper cultural practices, can also increase the incidence of contamination. In current aflatoxin control measures, emphasis is put on prevention including a plethora of pre-harvest methods, introduced to control Aspergillus infestations and to avoid the deleterious effects of aflatoxins on public health. Nevertheless, the continuous evaluation and improvement of post-harvest methods to combat these hazardous secondary metabolites are also required. Already in-use and emerging physical methods, such as pulsed electric fields and other nonthermal treatments as well as interventions with chemical agents such as acids, enzymes, gases, and absorbents in animal husbandry have been demonstrated as effective in reducing mycotoxins in feed and food. Although most of them have no disadvantageous effect either on nutritional properties or food safety, further research is needed to ensure the expected efficacy. Nevertheless, we can envisage the rapid spread of these easy-to-use, cost-effective, and safe post-harvest tools during storage and food processing.

Novel strategies for degradation of aflatoxins in food and feed: A review

Aflatoxins are toxic secondary metabolites mainly produced by Aspergillus fungi, posing high carcinogenic potency in humans and animals. Dietary exposure to aflatoxins is a global problem in both developed and developing countries especially where there is poor regulation of their levels in food and feed. Thus, academics have been striving over the decades to develop effective strategies for degrading aflatoxins in food and feed. These strategies are technologically diverse and based on physical, chemical, or biological principles. This review summarizes the recent progress on novel aflatoxin degradation strategies including irradiation, cold plasma, ozone, electrolyzed oxidizing water, organic acids, natural plant extracts, microorganisms and enzymes. A clear understanding of the detoxification efficiency, mechanism of action, degradation products, application potential and current limitations of these methods is presented. In addition, the development and future perspective of nanozymes in aflatoxins degradation are introduced.

Performance of a UV-A LED system for degradation of aflatoxins B1 and M1 in pure water: kinetics and cytotoxicity study

The efficacy of a UV-A light emitting diode system (LED) to reduce the concentrations of aflatoxin B₁, aflatoxin M₁ (AFB₁, AFM₁) in pure water was studied. This work investigates and reveals the kinetics and main mechanism(s) responsible for the destruction of aflatoxins in pure water and assesses the cytotoxicity in liver hepatocellular cells. Irradiation experiments were conducted using an LED system operating at 365 nm (monochromatic wave-length). Known concentrations of aflatoxins were spiked in water and irradiated at UV-A doses ranging from 0 to 1,200 mJ/cm². The concentration of AFB₁ and AFM₁ was determined by HPLC with fluorescence detection. LC–MS/MS product ion scans were used to identify and semi-quantify degraded products of AFB₁ and AFM₁. It was observed that UV-A irradiation significantly reduced aflatoxins in pure water. In comparison to control, at dose of 1,200 mJ/cm² UV-A irradiation reduced AFB₁ and AFM₁ concentrations by 70 ± 0.27 and 84 ± 1.95%, respectively. We hypothesize that the formation of reactive species initiated by UV-A light may have caused photolysis of AFB₁ and AFM₁ molecules in water. In cell culture studies, our results demonstrated that the increase of UV-A dosage decreased the aflatoxins-induced cytotoxicity in HepG2 cells, and no significant aflatoxin-induced cytotoxicity was observed at UV-A dose of 1,200 mJ/cm². Further results from this study will be used to compare aflatoxins detoxification kinetics and mechanisms involved in liquid foods such as milk and vegetable oils.

Applications of Pulsed Light Decontamination Technology in Food Processing: An Overview

Consumers of the 21st century tend to be more aware and demand safe as well as nutritionally balanced food. Unfortunately, conventional thermal processing makes food safe at the cost of hampering nutritional value. The food industry is trying to develop non-thermal processes for food preservation. Pulsed light (PL) is one such emerging non-thermal food processing method that can decontaminate food products or food contact surfaces using white light. Exposure to intense light pulses (in infrared, visible, and ultraviolet (UV) regions) causes the death of microbial cells, rendering the food safe at room temperature. PL technology is an excellent and rapid method of disinfection of product surfaces and is increasingly being used for food surfaces and packaging decontamination, enabling the minimal processing of food. This paper aims to give an overview of the latest trends in pulsed light research, discuss principles of pulse generation, and review applications of various PL systems for the inactivation of microorganisms in vitro, in various food products, and on food contact surfaces. Effects of PL on food quality, challenges of the process, and its prospects are presented.

Minimizing Ochratoxin A Contamination through the Use of Actinobacteria and Their Active Molecules

Ochratoxin A (OTA) is a secondary metabolite produced by fungal pathogens such as Penicilliumverrucosum, which develops in food commodities during storage such as cereals, grapes, and coffee. It represents public health concerns due to its genotoxicity, carcinogenicity, and teratogenicity. The objective of this study was to evaluate the ability of actinobacteria and their metabolites to degrade OTA and/or to decrease its production. Sixty strains of actinobacteria were tested for their ability to prevent OTA formation by in vitro dual culture assays or with cell free extracts (CFEs). In dual culture, 17 strains strongly inhibited fungal growth, although it was generally associated with an increase in OTA specific production. Seventeen strains inhibited OTA specific production up to 4% of the control. Eleven actinobacteria CFEs reduced OTA specific production up to 62% of the control, while no substantial growth inhibition was observed except for two strains up to 72% of the control. Thirty-three strains were able to degrade OTA almost completely in liquid medium whereas only five were able to decrease it on solid medium, and two of them reduced OTA to an undetectable amount. Our results suggest that OTA decrease could be related to different strategies of degradation/metabolization by actinobacteria, through enzyme activities and secretion of secondary metabolites interfering with the OTA biosynthetic pathway. CFEs appeared to be ineffective at degrading OTA, raising interesting questions about the detoxification mechanisms. Common degradation by-products (e.g., OTα or L-β-phenylalanine) were searched by HPLC-MS/MS, however, none of them were found, which implies a different mechanism of detoxification and/or a subsequent degradation into unknown products.

The spore coat is essential for Bacillus subtilis spore resistance to pulsed light, and pulsed light treatment eliminates some spore coat proteins

Microbial surface contamination of equipment or of food contact material is a recurring problem in the food industry. Spore-forming bacteria are far more resistant to a wide variety of treatments than their vegetative forms. Understanding the mechanisms underlying decontamination processes is needed to improve surface decontamination strategies against endospores potentially at the source of foodborne diseases or food-spoilage. Pulsed light (PL) with xenon lamps delivers high-energy short-time pulses of light with wavelengths in the range 200 nm-1100 nm and a high UV-C fraction. Bacillus subtilis spores were exposed to either PL or to continuous UV-C. Gel electrophoresis and western blotting revealed elimination of various proteins of the spore coat, an essential outer structure that protects spores from a wide variety of environmental conditions and inactivation treatments. Proteomic analysis confirmed the elimination of some spore coat proteins after PL treatment. Transmission electron microscopy of PL treated spores revealed a gap between the lamellar inner spore coat and the outer spore coat. Overall, spores of mutant strains with defects in genes coding for spore coat proteins were more sensitive to PL than to continuous UV-C. This study demonstrates that radiations delivered by PL contribute to specific damage to the spore coat, and overall to spore inactivation.

Adverse Effects, Transformation and Channeling of Aflatoxins Into Food Raw Materials in Livestock

Aflatoxins are wide-spread harmful carcinogenic secondary metabolites produced by Aspergillus species, which cause serious feed and food contaminations and affect farm animals deleteriously with acute or chronic manifestations of mycotoxicoses. On farm, both pre-harvest and post-harvest strategies are applied to minimize the risk of aflatoxin contaminations in feeds. The great economic losses attributable to mycotoxin contaminations have initiated a plethora of research projects to develop new, effective technologies to prevent the highly toxic effects of these secondary metabolites on domestic animals and also to block the carry-over of these mycotoxins to humans through the food chain. Among other areas, this review summarizes the latest findings on the effects of silage production technologies and silage microbiota on aflatoxins, and it also discusses the current applications of probiotic organisms and microbial products in feeding technologies. After ingesting contaminated foodstuffs, aflatoxins are metabolized and biotransformed differently in various animals depending on their inherent and acquired physiological properties. These mycotoxins may cause primary aflatoxicoses with versatile, species-specific adverse effects, which are also dependent on the susceptibility of individual animals within a species, and will be a function of the dose and duration of aflatoxin exposures. The transfer of these undesired compounds from contaminated feed into food of animal origin and the aflatoxin residues present in foods become an additional risk to human health, leading to secondary aflatoxicoses. Considering the biological transformation of aflatoxins in livestock, this review summarizes (i) the metabolism of aflatoxins in different animal species, (ii) the deleterious effects of the mycotoxins and their derivatives on the animals, and (iii) the major risks to animal health in terms of the symptoms and consequences of acute or chronic aflatoxicoses, animal welfare and productivity. Furthermore, we traced the transformation and channeling of Aspergillus-derived mycotoxins into food raw materials, particularly in the case of aflatoxin contaminated milk, which represents the major route of human exposure among animal-derived foods. The early and reliable detection of aflatoxins in feed, forage and primary commodities is an increasingly important issue and, therefore, the newly developed, easy-to-use qualitative and quantitative aflatoxin analytical methods are also summarized in the review.

Ozone technology to reduce zearalenone contamination in whole maize flour: degradation kinetics and impact on quality

BACKGROUND

Maize is one of the most important cereals. It is used for different purposes and in different industries worldwide. This cereal is prone to contamination with mycotoxins, such as zearalenone (ZEN), which is produced mainly by Fusarium graminearum, F. culmorum and F. equiseti. Toxin production under highly moist conditions (aw > 0.95) is exacerbated if there are alternations between low temperatures (12-14 °C) and high temperatures (25-28 °C). Even if good production practices are adopted, mycotoxins can be found in several stages of the production chain. For this reason, an alternative to reducing this contamination is ozonation. This study evaluated the reduction of ZEN in naturally contaminated whole maize flour (WMF) treated with 51.5 mg L^-1 of ozone for up to 60 min. Pasting properties, peroxide value, and fatty acid composition were also evaluated.

RESULTS

Zearalenone degradation in ozonated WMF was described by a fractional first-order kinetic, with a maximum reduction of 62.3% and kinetic parameter of 0.201 min^-1 in the conditions that were evaluated. The ozonation process in WMF showed a decrease in the apparent viscosity, a decrease in the proportion of linoleic, oleic, and α-linolenic fatty acids, an increase in the proportion of palmitic acid, and an increase in the peroxide value.

CONCLUSION

Ozonation was effective in reducing ZEN contamination in WMF. However, it also modified the pasting properties, fatty acid profile, and peroxide value, affecting functional and technological aspects of WMF. © 2019 Society of Chemical Industry.

Cold Plasma Treatment as an Alternative for Ochratoxin a Detoxification and Inhibition of Mycotoxigenic Fungi in Roasted Coffee

Ochratoxin A (OTA) produced by mycotoxigenic fungi (Aspergillus and Penicillium spp.) is an extremely toxic and carcinogenic metabolite. The use of cold plasma to inhibit toxin-producing microorganisms in coffee could be an important alternative to avoid proliferation of mycotoxigenic fungi. Roasted coffee samples were artificially inoculated with A. westerdijikiae, A. steynii, A. versicolor, and A. niger, and incubated at 27 °C over 21 days for OTA production. Samples were cold plasma treated at 30 W input power and 850 V output voltage with helium at 1.5 L/min flow. OTA production in coffee was analyzed by high performance liquid chromatography coupled to a mass spectrometer (HPLC-MS). After 6 min of treatment with cold plasma, fungi were completely inhibited (4 log reduction). Cold plasma reduces 50% of OTA content after 30 min of treatment. Toxicity was estimated for extracts of artificially contaminated roasted coffee samples using the brine shrimp (Artemia salina) lethality assay. Toxicity for untreated roasted coffee was shown to be “toxic”, while toxicity for cold plasma treated coffee was reduced to “slightly toxic”. These results suggested that cold plasma may be considered as an alternative method for the degradation and reduction of toxin production by mycotoxigenic fungi in the processing of foods and feedstuffs.

Transformation Products of Organic Contaminants and Residues-Overview of Current Simulation Methods

The formation of transformation products (TPs) from contaminants and residues is becoming an increasing focus of scientific community. All organic compounds can form different TPs, thus demonstrating the complexity and interdisciplinarity of this topic. The properties of TPs could stand in relation to the unchanged substance or be more harmful and persistent. To get important information about the generated TPs, methods are needed to simulate natural and manmade transformation processes. Current tools are based on metabolism studies, photochemical methods, electrochemical methods, and Fenton’s reagent. Finally, most transformation processes are based on redox reactions. This review aims to compare these methods for structurally different compounds. The groups of pesticides, pharmaceuticals, brominated flame retardants, and mycotoxins were selected as important residues/contaminants relating to their worldwide occurrence and impact to health, food, and environmental safety issues. Thus, there is an increasing need for investigation of transformation processes and identification of TPs by fast and reliable methods.

Degradation kinetics of aflatoxin B1 and B2 in solid medium by using pulsed light irradiation

BACKGROUND

Pulsed light (PL) is a new potential technology to degrade aflatoxin. The objective of this study was to investigate the degradation characters of aflatoxin B₁ (AFB₁ ) and B₂ (AFB₂ ) treated under PL irradiation. A kinetic degradation study of AFB₁ and AFB₂ in solid medium was performed under PL irradiation at different initial concentrations of AFB₁ (229.9, 30.7 and 17.8 μg kg^-1 ) and AFB₂ (248.2, 32.2 and 19.5 μg kg^-1 ) and irradiation intensities (2.86, 1.60 and 0.93 W cm^-2 ) of PL. A second-order reaction model was applied to describe degradation of AFB₁ and AFB₂ .

RESULTS

The results showed that the degradation of AFB₁ and AFB₂ followed the second-order reaction kinetic model well (R²  > 0.97). The degradation rate was proportional to the intensities of PL irradiation and the initial concentrations of aflatoxins.

CONCLUSION

It is concluded that the degradation of AFB₁ and AFB₂ with the use of PL could be accurately described using the second-order reaction kinetic model. © 2018 Society of Chemical Industry.

The Effect of Solution Properties on the Photochemical Ability of Pulsed Light to Inactivate Soybean Lipoxygenase

Inactivation of pure soybean lipoxygenase (LOX) by pulsed light (PL) technique was found to occur due to a photochemical effect, while inactivation of soybean LOX in a real food (soymilk) was due to the photothermal effect of PL. The effect of solution properties on the photochemical ability of PL to inactivate and degrade LOX was investigated. LOX was placed in different conditions and treated with PL at a 7 cm distance with different times. The result showed that LOX was less stable during PL operation at pH 9 compared with pH 6.8. Increasing LOX concentration, adding starch, and making a colored solution did reduce the photochemical ability of PL to inactivate LOX. PL and thermal treatment of partially purified LOX degraded the LOX band (measured by using SDS-PAGE) when no protease inhibitors were added. Controlling protease activity led to degradation of LOX by PL but not by thermal treatment.

Inactivation of Lipoxygenase in Soymilk by Pulsed Light

Inactivation of soybean lipoxygenase in soymilk by pulsed light (PL) at different durations and distances from the pulsed light lamp was determined with and without ice surrounding the soymilk sample tray for cooling. The results show that without cooling, the lowest LOX residual activity was 0.37%, 0.00%, and 7.24%, and with cooling the LOX residual activity was 76.3%, 87.2%, and 69.0% for origin fluence of 302 J/cm2, 340 J/cm2, and 567 J/cm2, respectively. The LOX band reduced or disappeared after PL treatments compared with the LOX band control as assessed by electrophoresis. Peroxide value of the soymilk had no significant increase after pulsed light treatment. This research provided evidence that PL treatment could fully inactivate LOX in soymilk, mostly due to heat generated by the PL strobe, therefore the photo-thermal effect was the main factor that impacted LOX activity.

Effect of UV irradiation on aflatoxin reduction: a cytotoxicity evaluation study using human hepatoma cell line

In this proof-of-concept study, the efficacy of a medium-pressure UV (MPUV) lamp source to reduce the concentrations of aflatoxin B₁, aflatoxin B₂, and aflatoxin G₁ (AFB_1, AFB₂, and AFG₁) in pure water is investigated. Irradiation experiments were conducted using a collimated beam system operating between 200 to 360 nm. The optical absorbance of the solution and the irradiance of the lamp are considered in calculating the average fluence rate. Based on these factors, the UV dose was quantified as a product of average fluence rate and treatment time. Known concentrations of aflatoxins were spiked in water and irradiated at UV doses ranging from 0, 1.22, 2.44, 3.66, and 4.88 J cm^-2. The concentration of aflatoxins was determined by HPLC with fluorescence detection. LC-MS/MS product ion scans were used to identify and semi-quantify degraded products of AFB₁, AFB₂, and AFG₁. It was observed that UV irradiation significantly reduced aflatoxins in pure water (p < 0.05). Irradiation doses of 4.88 J cm^-2 reduced concentrations 67.22% for AFG₁, 29.77% for AFB₂, and 98.25% for AFB₁ (p < 0.05). Using this technique, an overall reduction of total aflatoxin content of ≈95% (p < 0.05) was achieved. We hypothesize that the formation of ˙OH radicals initiated by UV light may have caused photolysis of AFB₁, AFB₂, and AFG₁ molecules. In cell culture studies, our results demonstrated that the increase of UV dosage decreased the aflatoxin-induced cytotoxicity in HepG₂ cells. Therefore, our research finding suggests that UV irradiation can be used as an effective technique for the reduction of aflatoxins.

Mycotoxin Decontamination of Food: Cold Atmospheric Pressure Plasma versus "Classic" Decontamination

Mycotoxins are secondary metabolites produced by several filamentous fungi, which frequently contaminate our food, and can result in human diseases affecting vital systems such as the nervous and immune systems. They can also trigger various forms of cancer. Intensive food production is contributing to incorrect handling, transport and storage of the food, resulting in increased levels of mycotoxin contamination. Mycotoxins are structurally very diverse molecules necessitating versatile food decontamination approaches, which are grouped into physical, chemical and biological techniques. In this review, a new and promising approach involving the use of cold atmospheric pressure plasma is considered, which may overcome multiple weaknesses associated with the classical methods. In addition to its mycotoxin destruction efficiency, cold atmospheric pressure plasma is cost effective, ecologically neutral and has a negligible effect on the quality of food products following treatment in comparison to classical methods.

Recent findings in pulsed light disinfection

Nonthermal disinfection technologies are gaining increasing interest in the field of minimally processed food in order to improve the microbial safety or to extend the shelf life. Especially fresh-cut produce or meat and fish products are vulnerable to microbial spoilage, but, due to their sensitivity, they require gentle preservation measures. The application of intense light pulses of a broad spectral range comprising ultraviolet, visible and near infrared irradiation is currently investigated as a potentially suitable technology to reduce microbial loads on different food surfaces or in beverages. Considerable research has been performed within the last two decades, in which the impact of various process parameters or microbial responses as well as the suitability of pulsed light (PL) for food applications has been examined. This review summarizes the outcome of the latest studies dealing with the treatment of various foods including the impact of PL on food properties as well as recent findings about the microbicidal action and relevant process parameters.

Decontamination of poultry feed from ochratoxin A by UV and sunlight radiations

BACKGROUND

Mycotoxin-contaminated feed is very dangerous for the growth and even life of poultry. The objective of the current study was to investigate the efficacy of ultra-violet irradiation for decontamination of ochratoxin A (OTA) in spiked and naturally contaminated poultry feed samples. Spiked and naturally contaminated feed samples were irradiated with ultra-violet light (UV) at distance of 25 cm over the feed samples. In vitro, the effect of UV intensity (0.1 mW cm(-2) at 254 nm UV-C) on different types of poultry feeds contaminated with OTA was evaluated. The same samples were also irradiated with sunlight and analysed for OTA by an indirect enzyme linked immunosorbent assay method.

RESULTS

Poultry feed samples containing 500 µg kg(-1) were 100% decontaminated in 180 min with UV radiation while OTA was decreased to 70-95 µg kg(-1) using the same poultry feed samples after 8 h sunlight irradiation. Therefore, UV light was found to be more effective. Only 1 h of UV irradiation was found to be sufficient to bring the OTA level to the maximum regulatory limit suggested for poultry feeds (100 µg kg(-1) ), while 8 h were needed to obtain this level using sunlight radiations.

CONCLUSION

The proposed approach is a viable option to reduce the level of OTA in contaminated poultry feeds. © 2015 Society of Chemical Industry.

Light regulation of mycotoxin biosynthesis: new perspectives for food safety

Mycotoxins are secondary metabolites produced by toxigenic fungi contaminating foods and feeds in pre-, post-harvest and processing, and represent a great concern worldwide, both for the economic implications and for the health of the consumers. Many environmental conditions are involved in the regulation of mycotoxin biosynthesis. Among these, light represents one of the most important signals for fungi, influencing several physiological responses such as pigmentation, sexual development and asexual conidiation, primary and secondary metabolism, including mycotoxin biosynthesis. In this review we summarise some recent findings on the effect of specific light wavelength and intensity on mycotoxin biosynthesis in the main toxigenic fungal genera. We describe the molecular mechanism underlying light perception and its involvement in the regulation of secondary metabolism, focusing on VeA, global regulator in Aspergillus nidulans, and the White-Collar proteins, key components of light response in Neurospora crassa. Light of specific wavelength and intensity exerts different effects both on growth and on toxin production depending on the fungal genus. In Penicillium spp. red (627 nm) and blue wavelengths (455-470 nm) reduce ochratoxin A (OTA) biosynthesis by modulating the level of expression of the ochratoxin polyketide synthase. Furthermore a mutual regulation between citrinin and OTA production is reported in Penicillium toxigenic species. In Aspergillus spp. the effect of light treatment is strongly dependent on the species and culture conditions. Royal blue wavelength (455 nm) of high intensity (1,700 Lux) is capable of completely inhibit fungal growth and OTA production in Aspergillus stenyii and Penicillum verrucosum. In Fusarium spp. the effect of light exposure is less effective; mycotoxin-producing species, such as Fusarium verticillioides and Fusarium proliferatum, grow better under light conditions, and fumonisin production increased. This review provides a comprehensive picture on light regulation of mycotoxin biosynthesis and discusses possible new applications of this resource in food safety.