The influence of protein adsorption on interactions of cultured human endothelial cells with polymers

A niche-mimicking polymer hydrogel-based approach to identify molecular targets for tackling human pancreatic cancer stem cells

BACKGROUND

Pancreatic adenocarcinoma (PAAD) is one of the most fatal human cancers, but effective therapies remain to be established. Cancer stem cells (CSCs) are highly resistant to anti-cancer drugs and a deeper understanding of their microenvironmental niche has been considered important to provide understanding and solutions to cancer eradication. However, as the CSC niche is composed of a wide variety of biological and physicochemical factors, the development of multidisciplinary tools that recapitulate their complex features is indispensable. Synthetic polymers have been studied as attractive biomaterials due to their tunable biofunctionalities, while hydrogelation technique further renders upon them a diversity of physical properties, making them an attractive tool for analysis of the CSC niche.

METHODS

To develop innovative materials that recapitulate the CSC niche in pancreatic cancers, we performed polymer microarray analysis to identify niche-mimicking scaffolds that preferentially supported the growth of CSCs. The niche-mimicking activity of the identified polymers was further optimized by polyethylene glycol (PEG)-based hydrogelation. To reveal the biological mechanisms behind the activity of the optimized hydrogels towards CSCs, proteins binding onto the hydrogel were analyzed by liquid chromatography with tandem mass spectrometry (LC-MS/MS), and the potential therapeutic targets were validated by looking at gene expression and patients' outcome in the TCGA database.

RESULTS

PA531, a heteropolymer composed of 2-methoxyethyl methacrylate (MEMA) and 2-(diethylamino)ethyl methacrylate (DEAEMA) (5.5:4.5) that specifically supports the growth and maintenance of CSCs was identified by polymer microarray screening using the human PAAD cell line KLM1. The polymer PA531 was converted into five hydrogels (PA531-HG1 to HG5) and developed to give an optimized scaffold with the highest CSC niche-mimicking activities. From this polymer that recapitulated CSC binding and control, the proteins fetuin-B and angiotensinogen were identified as candidate target molecules with clinical significance due to the correlation between gene expression levels and prognosis in PAAD patients and the proteins associated with the niche-mimicking polymer.

CONCLUSION

This study screened for biofunctional polymers suitable for recapitulation of the pancreatic CSC niche and one hydrogel with high niche-mimicking abilities was successfully fabricated. Two soluble factors with clinical significance were identified as potential candidates for biomarkers and therapeutic targets in pancreatic cancers. Such a biomaterial-based approach could be a new platform in drug discovery and therapy development against CSCs, via targeting of their niche.

Cell type specific adhesion to surfaces functionalised by amine plasma polymers

Our previously-obtained impressive results of highly increased C2C12 mouse myoblast adhesion to amine plasma polymers (PPs) motivated current detailed studies of cell resistance to trypsinization, cell proliferation, motility, and the rate of attachment carried out for fibroblasts (LF), keratinocytes (HaCaT), rat vascular smooth muscle cells (VSMC), and endothelial cells (HUVEC, HSVEC, and CPAE) on three different amine PPs. We demonstrated the striking difference in the resistance to trypsin treatment between endothelial and non-endothelial cells. The increased resistance observed for the non-endothelial cell types was accompanied by an increased rate of cellular attachment, even though spontaneous migration was comparable to the control, i.e., to the standard cultivation surface. As demonstrated on LF fibroblasts, the resistance to trypsin was similar in serum-supplemented and serum-free media, i.e., medium without cell adhesion-mediating proteins. The increased cell adhesion was also confirmed for LF cells by an independent technique, single-cell force spectroscopy. This method, as well as the cell attachment rate, proved the difference among the plasma polymers with different amounts of amine groups, but other investigated techniques could not reveal the differences in the cell behaviour on different amine PPs. Based on all the results, the increased resistance to trypsinization of C2C12, LF, HaCaT, and VSMC cells on amine PPs can be explained most probably by a non-specific cell adhesion such as electrostatic interaction between the cells and amine groups on the material surface, rather than by the receptor-mediated adhesion through serum-derived proteins adsorbed on the PPs.

The Construction of Biomimetic Cementum Through a Combination of Bioskiving and Fluorine-Containing Biomineralization

Despite tremendous attention is given to the construction of biomimetic cementum for regeneration of tooth cementum, the lack of recapitulating the composition and hierarchical structure of cementum often leads to the poor performance of constructed materials. How to highly mimic the sophisticated composition and hierarchy of cementum remains a longstanding challenge in constructing the biomimetic cementum. Inspired by cementum formation process, a novel construction approach via a combination of bioskiving and fluorine-containing biomineralization is developed in this study. The alternative collagen lamellae (ACL) that can highly mimic the rotated plywood structure of cementum collagen matrix is fabricated via bioskiving. Followed by biomineralization in the amorphous calcium phosphate (ACP) solution with different concentration of fluorine, a series of biomimetic cementum is constructed. Screened by physicochemical characterization, the biomimetic cementum with the composition and hierarchical structure highly similar to human cementum is selected. Through in vitro biological assay, this biomimetic cementum is proven to significantly promote the adhesion, proliferation, and cementogenic differentiation of periodontal ligament cells (PDLCs). Furthermore, in vivo study demonstrates that biomimetic cementum could induce cementogenesis. This biomimetic cementum constructed via combinatory application of bioskiving and fluorine-containing biomineralization stands as a promising candidate for achieving cementum regeneration.

Toll-like Receptor 2-Dependent NF-κB/AP-1 Activation by Damage-Associated Molecular Patterns Adsorbed on Polymeric Surfaces

The foreign body reaction is a chronic inflammatory response to an implanted biomaterial that ultimately leads to fibrous encapsulation of the implant. It is widely accepted that the host response to implanted biomaterials is largely dependent on the species and conformations of proteins adsorbed onto the material surface due to the adsorbate's role in mediating cellular interactions with the implanted material. While the cellular response to adsorbed serum-derived proteins has been studied extensively, the presence of endogenous, matrix- and cell-derived mediators of inflammation within the adsorbed protein layer and their impact on cell-material interactions is not well-understood. Damage associated molecular patterns (DAMPs) are endogenous ligands released by stressed or damaged tissues to stimulate sterile inflammatory responses via Toll-like receptors (TLRs) and other pattern recognition receptors. The present study investigated the potential role of tissue-derived, pro-inflammatory stimuli in macrophage responses to biomaterials using cell lysate as a complex source of cell-derived DAMPs and poly(methyl methacrylate) (PMMA) and polydimethylsiloxane (PDMS) films as model biomaterials. We show that lysate-adsorbed PMMA and PDMS surfaces strongly induced NF-κB/AP-1 transcription factor activity and pro-inflammatory cytokine secretion in the RAW-Blue macrophage cell line compared to serum-adsorbed surfaces. Lysate-dependent NF-κB/AP-1 activation and cytokine expression were strongly attenuated by TLR2 neutralizing antibodies, while TLR4 inhibition resulted in a modest reduction. These data suggest that DAMPs, in their adsorbed conformations on material surfaces, may play a significant role in macrophage activation through TLR signaling, and that TLR pathways, particularly TLR2, merit further investigation as potential therapeutic targets to modulate host responses to implanted biomaterials.

Cross-linked antifouling polysaccharide hydrogel coating as extracellular matrix mimics for wound healing

Antifouling hydrogel coating based on natural polysaccharide could effectively promote diabetic wound healing.

Nanochips of Tantalum Oxide Nanodots as artificial-microenvironments for monitoring Ovarian cancer progressiveness

Nanotopography modulates cell characteristics and cell behavior. Nanotopological cues can be exploited to investigate the in-vivo modulation of cell characteristics by the cellular microenvironment. However, the studies explaining the modulation of tumor cell characteristics and identifying the transition step in cancer progressiveness are scarce. Here, we engineered nanochips comprising of Tantalum oxide nanodot arrays of 10, 50, 100 and 200 nm as artificial microenvironments to study the modulation of cancer cell behavior. Clinical samples of different types of Ovarian cancer at different stages were obtained, primary cultures were established and then seeded on different nanochips. Immunofluorescence (IF) was performed to compare the morphologies and cell characteristics. Indices corresponding to cell characteristics were defined. A statistical comparison of the cell characteristics in response to the nanochips was performed. The cells displayed differential growth parameters. Morphology, Viability, focal adhesions, microfilament bundles and cell area were modulated by the nanochips which can be used as a measure to study the cancer progressiveness. The ease of fabrication of nanochips ensures mass-production. The ability of the nanochips to act as artificial microenvironments and modulate cell behavior may lead to further prospects in the markerless monitoring of the progressiveness and ultimately, improving the prognosis of Ovarian cancer.

Prospects of common biomolecules as coating substances for polymeric biomaterials

The concept of using common biomolecules like proteins, carbohydrates,etc., for improving the biocompatibility seems rational and effective because of the bio-friendly surface that they present, remains closer in mimicking the innate environment.

Effect of bioactive extruded PLA/HA composite films on focal adhesion formation of preosteoblastic cells

The quality of the initial cell attachment to a biomaterial will influence any further cell function, including spreading, proliferation, differentiation and viability. Cell attachment is influenced by the material's ability to adsorb proteins, which is related to the surface chemistry and topography of the material. In this study, we incorporated hydroxyapatite (HA) particles into a poly(lactic acid) (PLA) composite and evaluated the surface structure and the effects of HA density on the initial cell attachment in vitro of murine calvarial preosteoblasts (MC3T3-EI). Scanning electron microscopy (SEM), atomic force microscopy (AFM) and infrared spectroscopy (FTIR) showed that the HA particles were successfully incorporated into the PLA matrix and located at the surface which is of importance in order to maintain the bioactive effect of the HA particles. SEM and AFM investigation revealed that the HA density (particles/area) as well as surface roughness increased with HA loading concentration (i.e. 5, 10, 15 and 20wt%), which promoted protein adsorption. Furthermore, the presence of HA on the surface enhanced cell spreading, increased the formation of actin stress fibers and significantly improved the expression of vinculin in MC3T3-E1 cells which is a key player in the regulation of cell adhesion. These results suggest the potential utility of PLA/HA composites as biomaterials for use as a bone substitute material and in tissue engineering applications.

Evaluation of biocompatibility using in vitro methods: interpretation and limitations

The in vitro biocompatibility of novel materials has to be proven before a material can be used as component of a medical device. This must be done in cell culture tests according to internationally recognized standard protocols. Subsequently, preclinical and clinical tests must be performed to verify the safety of the new material and device. The present chapter focuses on the first step, the in vitro testing according to ISO 10993-5, and critically discusses its limited significance. Alternative strategies and a brief overview of activities to improve the current in vitro tests are presented in the concluding section.

Biological evaluation of polyvinyl alcohol hydrogel crosslinked by polyurethane chain for cartilage tissue engineering in rabbit model

Polyvinyl alcohol (PVA) hydrogel chains were crosslinked by urethane pre-polymer (PPU) in order to fabricate a new substitute for cartilage lesions. The microscopy images showed that the cultured chondrocytes had spherical morphology on PVA-PPU sample after 4 weeks of isolation in vitro. The alcian blue and safranin O staining proved the presence of proteoglycan on the surface of PVA-PPU sample secreted by cultured chondrocytes. This was confirmed by the detection of sulfate ions in the wavelength dispersive X-ray (WDX) analysis. In addition, the expression of collagen type II and aggrecan were observed in chondrocytes cultured on PVA-PPU by RT-PCR. Moreover, the implantation of the PVA-PPU sample with autologous cultured chondrocytes revealed the formation of neocartilage tissue in a rabbit model during 12 weeks follow up. In conclusion, the results verified that isolated chondrocytes cultured on PVA-PPU retain their original phenotype and this composition can be considered as promising substrate for cartilage tissue engineering.

Tailored degradation of biocompatible poly(3-hydroxybutyrate-co-3-hydroxyvalerate)/calcium silicate/poly(lactide-co-glycolide) ternary composites: an in vitro study

Biodegradable materials, which are currently available for bone tissue regeneration, still have limitations regarding their degradation rate, mechanical stability and/or biological response. Thus, a novel generation of materials for bioactive bone scaffolds is needed that triggers hydroxyapatite formation and can be tailored to suit application-specific requirements. In this study we developed ternary bioactive composite materials composed of poly(3-hydroxybutyrate-co-3-hydroxyvalerate), calcium silicate and poly(lactide-co-glycolide) (PHBV/CS/PLGA), which merged the good bioactivity of CS/PHBV composite and the improved degradation velocity of PHBV/PLGA blend. Bioactive character of all composites was proven by formation of hydroxyapatite-like crystals after already one week of incubation in simulated body fluid. Addition of PLGA significantly increased initial ultimate tensile strength (UTS0) and Young's modulus of the ternary composites from 14.3±1.1 MPa (binary composite) to 22.3±2.6 MPa and 1.23±0.05 GPa up to 1.64±0.14 GPa, respectively. Furthermore the degradation rate (measured as a decrease of UTS during degradation) could be successfully tailored and was in range of -0.033 UTS0 to -0.118 UTS0 MPa/week. The bioacceptance of the materials was proven in vitro using 2-D (conventional setup) and 3-D (multicellular spheroids) human bone marrow stromal cell cultures.

Development of novel fluorescent probes for the analysis of protein interactions under physiological conditions with medical devices

In this article, a method to analyze protein adsorption on porous, clinically relevant samples under physiologically relevant conditions is described. The use of fluorescent probes was identified as a methodology that would facilitate analysis under a range of conditions including fully competitive conditions where a protein of interest may be labeled in isolation and then allowed to compete with unlabeled proteins on samples that require no specialized surface pretreatment. As a first step, this article describes the covalent labeling of isolated bovine serum albumin (BSA) with fluorescent fluoresceinthioureidoaminocaproic acid, FTCA, giving FTCA-BSA. The fluorescence intensity of FTCA-BSA was then used to monitor the adsorption and desorption of the protein under noncompetitive conditions with two forms of hydroxyapatite discs (silicate-substituted, SA and stoichiometric, HA) in phosphate-buffered saline (PBS) and minimum essential Eagles' medium (MEM). Noncompetitive conditions were used to facilitate the validation of the technique in which data obtained from these experiments were corroborated against data obtained using an established total protein assay method (Quant-IT kit, Invitrogen). These experiments demonstrated that the FTCA-BSA probe had several advantages including a greater sensitivity at lower concentrations and a considerably longer lifetime. The results also demonstrated that the interaction of BSA with SA and HA was also highly temperature- and media-dependent. Under the most physiologically relevant conditions of MEM at 37 °C, BSA was more readily adsorbed to SA with significant differences between biomaterials, but no differences were observed during the desorption process. The use of this method to analyze adsorption under competitive conditions will be the subject of further investigations.

Interplay between protein-modified surface and functional response of osteoblasts

The objective of the study is to elucidate the interplay between fibronectin-metal hybrid surfaces and osteoblast function. The practical relevance is that a significant initial step in the process of prosthetic integration within a physiological system is the rapid adsorption of proteins, including fibronectin, on the surface of biomedical device. Here, we compare and contrast the cell-substrate interactions on bare and protein-modified surfaces. The protein adsorption on the surface was beneficial in favorably modulating biological functions including cell attachment, proliferation, and viability. Additionally, immunofluorescence studies demonstrated stronger vinculin signals associated with actin stress fibers in the outer regions of the cells and cellular extensions on protein-adsorbed surfaces. These results support the hypothesis that protein adsorption on artificial biomedical devices can promote bioactivity and regulate biological functions.

Interplay between grain structure and protein adsorption on functional response of osteoblasts: ultrafine-grained versus coarse-grained substrates

The rapid adsorption of proteins is the starting and primary biological response that occurs when a biomedical device is implanted in the physiological system. The biological response, however, depends on the surface characteristics of the device. Considering the significant interest in nano-/ultrafine surfaces and nanostructured coatings, we describe here, the interplay between grain structure and protein adsorption (bovine serum albumin: BSA) on osteoblasts functions by comparing nanograined/ultrafine-grained (NG/UFG) and coarse-grained (CG: grain size in the micrometer range) substrates by investigating cell-substrate interactions. The protein adsorption on NG/UFG surface was beneficial in favorably modulating biological functions including cell attachment, proliferation, and viability, whereas the effect was less pronounced on protein adsorbed CG surface. Additionally, immunofluorescence studies demonstrated stronger vinculin signals associated with actin stress fibers in the outer regions of the cells and cellular extensions on protein adsorbed NG/UFG surface. The functional response followed the sequence: NG/UFG(BSA) > NG/UFG > CG(BSA) > CG. The differences in the cellular response on bare and protein adsorbed NG/UFG and CG surfaces are attributed to cumulative contribution of grain structure and degree of hydrophilicity. The study underscores the potential advantages of protein adsorption on artificial biomedical devices to enhance the bioactivity and regulate biological functions.

Microvascular guidance: a challenge to support the development of vascularised tissue engineering construct

The guidance of endothelial cell organization into a capillary network has been a long-standing challenge in tissue engineering. Some research efforts have been made to develop methods to promote capillary networks inside engineered tissue constructs. Capillary and vascular networks that would mimic blood microvessel function can be used to subsequently facilitate oxygen and nutrient transfer as well as waste removal. Vascularization of engineering tissue construct is one of the most favorable strategies to overpass nutrient and oxygen supply limitation, which is often the major hurdle in developing thick and complex tissue and artificial organ. This paper addresses recent advances and future challenges in developing three-dimensional culture systems to promote tissue construct vascularization allowing mimicking blood microvessel development and function encountered in vivo. Bioreactors systems that have been used to create fully vascularized functional tissue constructs will also be outlined.

Contractility dominates adhesive ligand density in regulating cellular de-adhesion and retraction kinetics

Cells that are enzymatically detached from a solid substrate rapidly round up as the tensile prestress in the cytoskeleton is suddenly unopposed by cell-ECM adhesions. We recently showed that this retraction follows sigmoidal kinetics with time constants that correlate closely with cortical stiffness values. This raises the promising prospect that these de-adhesion measurements may be used for high-throughput screening of cell mechanical properties; however, an important limitation to doing so is the possibility that the retraction kinetics may also be influenced and potentially rate-limited by the time needed to sever matrix adhesions. In this study, we address this open question by separating contributions of contractility and adhesion to cellular de-adhesion and retraction kinetics. We first develop serum-free conditions under which U373 MG glioma cells can be cultured on substrates of fixed fibronectin density without direct matrix contributions from the medium. We show that while spreading area increases with ECM protein density, cortical stiffness and the time constants of retraction do not. Conversely, addition of lysophosphatidic acid (LPA) to stimulate cell contractility strongly speeds retraction, independent of the initial matrix protein density and LPA's contributions to spreading area. All of these trends hold in serum-rich medium commonly used in tissue culture, with the time constants of retraction much more closely tracking cortical stiffness than adhesive ligand density or cell spreading. These results support the use of cellular de-adhesion measurements to track cellular mechanical properties.

Combinatorial development of biomaterials for clonal growth of human pluripotent stem cells

Both human embryonic stem cells and induced pluripotent stem cells can self-renew indefinitely in culture; however, present methods to clonally grow them are inefficient and poorly defined for genetic manipulation and therapeutic purposes. Here we develop the first chemically defined, xeno-free, feeder-free synthetic substrates to support robust self-renewal of fully dissociated human embryonic stem and induced pluripotent stem cells. Material properties including wettability, surface topography, surface chemistry and indentation elastic modulus of all polymeric substrates were quantified using high-throughput methods to develop structure-function relationships between material properties and biological performance. These analyses show that optimal human embryonic stem cell substrates are generated from monomers with high acrylate content, have a moderate wettability and employ integrin alpha(v)beta(3) and alpha(v)beta(5) engagement with adsorbed vitronectin to promote colony formation. The structure-function methodology employed herein provides a general framework for the combinatorial development of synthetic substrates for stem cell culture.

Polyelectrolyte multilayer films functionalized with peptides for promoting osteoblast functions

Layer-by-layer deposition of polyelectrolyte multilayer (PEM) thin films has recently been applied to biomaterial applications. This simple and versatile technique provides a wide variety of potential utilization by insertion of biomolecules such as cell adhesion peptides. In this work dual peptides containing RGD (a cell-binding domain) and LHRRVKI (a heparin-binding domain) were immobilized onto polystyrene by the PEM technique and the effects on osteoblast cell culture were investigated. These peptides were conjugated to the amino groups of poly(allylamine hydrochloride) and then adsorbed onto the top of a 10 layer poly(allylamine hydrochloride)/poly(acrylic acid) film assembled at either pH 2.0 or pH 6.5. Osteoblasts, isolated from neonatal rat calvariae, were then seeded and cultured on the peptide-conjugated surfaces. We found that the cells adhered and grew better on the RGD-conjugated PEM films. The osteoblasts exhibited a better differentiated phenotype on the pH 2.0 films than the pH 6.5 films with respect to calcium deposition. The incorporation of LHRRVKI did not support cell adhesion, growth and matrix mineral deposition. Our results showed that the efficacy of RGD conjugation on osteoblast behavior was affected by the base PEM film.

Immobilization of biomolecules on the surface of electrospun polycaprolactone fibrous scaffolds for tissue engineering

To make polycaprolactone (PCL) more suitable for tissue engineering, PCL in the form of electrospun fibrous scaffolds was first modified with 1,6-hexamethylenediamine to introduce amino groups on their surface. Various biomolecules, i.e., collagen, chitosan, and Gly-Arg-Gly-Asp-Ser (GRGDS) peptide, were then immobilized on their surface, with N,N'-disuccinimidylcarbonate being used as the coupling agent. Dynamic water contact angle measurement indicated that the scaffold surface became more hydrophilic after the aminolytic treatment and the subsequent immobilization of the biomolecules. The appropriateness of these PCL fibrous scaffolds for the tissue/cell culture was evaluated in vitro with three different cell lines, e.g., mouse fibroblasts (L929), human epidermal keratinocytes (HEK001), and mouse calvaria-derived preosteoblastic cells (MC3T3-E1). Both the neat and the modified PCL fibrous scaffolds released no substances in the levels that were harmful to these cells. Among the various biomolecule-immobilized PCL fibrous scaffolds, the ones that had been immobilized with type I collagen, a Arg-Gly-Asp-containing protein, showed the greatest ability to support both the attachment and the proliferation of all of the investigated cell types, followed by those that had been immobilized with GRGDS peptide.

Connective-tissue responses to defined biomaterial surfaces. I. Growth of rat fibroblast and bone marrow cell colonies on microgrooved substrates

Surface microgeometry plays a role in tissue-implant surface interactions, but our understanding of its effects is incomplete. Substrate microgrooves strongly influence cells in vitro, as evidenced by contact guidance and cell alignment. We studied "dot" colonies of primary fibroblasts and bone marrow cells that were grown on titanium-coated, microgrooved polystyrene surfaces that we designed and produced. Rat tendon fibroblast and rat bone marrow colony growth and migration varied (p < 0.01) by microgroove dimension and slightly by cell type. We observed profoundly altered morphologies, reduced growth rates, and directional growth in colonies grown on microgrooved substrates, when compared with colonies grown on flat, control surfaces (p < 0.01). The cells in our colonies grown on microgrooved surfaces were well aligned and elongated in the direction parallel to the grooves and colonies. Our "dot" colony is an easily reproduced, easily measured and artificial explant model of tissue-implant interactions that better approximates in vivo implant responses than culturing isolated cells on biomaterials. Our results correlate well with in vivo studies of titanium dioxide-coated polystyrene, titanium, and titanium alloy implants with controlled microgeometries. Microgrooves and other surface features appear to directionally or spatially organize cells and matrix molecules in ways that contribute to improved stabilization and osseointegration of implants.

Wettability of substrata controls cell–substrate and cell–cell adhesions

The maintenance of endothelial cell (EC) monolayer architecture requires stable adhesions not only between neighboring cells but also between cells and the extracellular matrix. While the influence of biomaterials surface wettability on cell-substratum adhesion is rather well studied, its impact on cell-cell cohesion has not been extensively investigated. In the present study a model system consisting of hydrophilic and hydrophobic glass pre-coated with fibronectin and fibrinogen was used to study the influence of surface wettability on both types of cell adhesions. It was demonstrated that the substrate wettability controls the adhesion and cytoskeletal organization of endothelial cells, which has an impact on the subsequent ability of cells to establish stable cell-cell cohesions. These effects were related to the accessibility of specific domains of the adsorbed proteins. While the hydrophobic substratum promoted cell-cell cohesion, on hydrophilic substrata cell-substrate adhesion was dominant. In addition, evidence for an influence of surface wettability on the cross talk between integrins and cadherins was found.

Fibronectin and culture temperature modulate the efficacy of an avidin–biotin binding system for chondrocyte adhesion and growth on biodegradable polymers

Cell adhesion to a scaffold is a prerequisite for tissue engineering. Many studies have been focused on enhancing cell adhesion to synthetic materials that are used for scaffold fabrication. Previously, we showed that immobilization of biotin molecules to chondrocyte surfaces enhanced cell adhesion to avidin-coated biodegradable polymers such as poly-L-lactic acid, poly-D,L-lactic acid and polycaprolactone. However, the endocytosis of cell membrane biotin molecules decreases binding strength between biotinylated-chondrocytes (B-chondrocytes) and avidin-coated substrata, and therefore decreases cell spreading and discourages long-term chondrocytes culture. In this study, we proposed two strategies to solve the shortcoming of the avidin-biotin binding system. First, the avidin-biotin binding system is combined with the intrinsic integrin-dependent adhesion systems in order to enhance long-term cell culture. Second, the incubation temperature is lowered in order to slow down the endocytosis process. We found that the avidin-biotin binding system in combination with FN-integrin binding system enhanced cell adhesion, cell spreading and cell growth. Decrease of cell culture temperature to 4 degrees C enhanced the adhesion of B-chondrocytes to the avidin-coated surfaces, but decreased cell viability and proliferation, compared to culture temperature of 37 degrees C. Whether there is an optimal seeding temperature between 4 and 37 degrees C for both adhesion and proliferation of B-chondrocytes needs further investigation. Our results indicated that modulation of the adhesion conditions could further enhance the efficacy of the avidin-biotin binding system in mediating cell adhesion, and subsequent tissue culture.

Coronary stents: a materials perspective

The objective of this review is to describe the suitability of different biomaterials as coronary stents. This review focuses on the following topics: (1) different materials used for stents, (2) surface characteristics that influence stent-biology interactions, (3) the use of polymers in stents, and (4) drug-eluting stents, especially those that are commercially available.

The effect of high-density-lipoprotein on thrombus formation on and endothelial cell attachement to biomaterial surfaces

Cardiovascular implants such as vascular grafts fail frequently because they lack genuine blood-compatibility. The blood-contacting surface should simultaneously prevent thrombus formation and promote formation of a confluent endothelial cell layer, to achieve sustained haemostasis. Contact activation and endothelialization are known to be determined by the plasma proteins which adsorb onto virtually all synthetic surfaces almost immediately upon contact with blood. A common approach in blood-compatibility research is, therefore, to use hydrophilic biomaterials, which are sometimes claimed to be "protein-repellent". We report here that, for synthetic polymeric surfaces, hydrophilicity is by no means synonymous to protein-repellency. We discovered that significant amounts of proteins, especially high-density lipoprotein, adsorb to hydrophilic surfaces. Pre-incubation of hydrophilic synthetic surfaces with high-density lipoprotein provides a blood-biomaterial interface, which inhibits thrombin generation and subsequent thrombus formation, and also accommodates overgrowth with a confluent endothelial layer. This approach may open the way to truly functional small-caliber arterial prostheses, and may also be relevant to cardiovascular tissue engineering in which de novo vascular tissues are cultured on or within a biomaterial scaffold.

Bootstrap analysis of the relation between initial adhesive events and long-term cellular functions of human osteoblasts cultured on biocompatible metallic substrates

Classically, the evaluation of cellular adhesion of cells on substrates is limited to the evaluation of cell attachment after some hours. We have claimed for several years that this evaluation is incomplete concerning the evaluation of cell adhesion and more precisely of the quality of the in vitro cell/biomaterial interface. With a view to demonstrating this assertion, we develop in this paper statistical correlations between short-term adhesion (STA) evaluating the attachment after 24 h (IA: initial attachment) and long-term adhesion (LTA) evaluating the strength of the cell/matrix substrate interface over 21 days of culture (AP: adhesion power). Additionally, as the adhesion phase is known to influence further growth of cells we proceed to the correlation of STA with the number of cells after 21 days. We demonstrate statistically the expected positive relation existing between STA and cell growth and we show that this relation is totally independent of the substrate's surface topography or chemistry. More surprisingly, we demonstrate the absence of correlation between IA and AP. This illustrates the fact that different mechanisms underlie STA and LTA. Moreover, this study demonstrates that the evaluation of the number of attached cells after some hours cannot let us presume either that cells will survive or that they will adhere at later times by forming a complex cell/substrate interface by synthesis of extracellular matrix proteins. Finally, the originality of this work lies in the extensive statistical correlation analysis performed between biological parameters describing the cell behaviour on a substrate.

Effect of an avidin-biotin binding system on chondrocyte adhesion, growth and gene expression

Cell adhesion to synthetic biomaterials is a prerequisite for anchorage cell culture and tissue engineering. The current study investigated utilization of an avidin-biotin binding system in enhancing chondrocyte adhesion to tissue culture polystyrene (TCPS). Biotinylated chondrocytes adhered to avidin-coated TCPS more quickly than untreated chondrocytes to bare TCPS. Also the avidin-biotin binding system enhanced cell initial spreading. However, the effects were only transient. The growth of biotinylated chondrocytes was first decreased during the first 3 days but increased afterwards. The progeny of biotinylated chondrocytes still maintained the ability in expressing cartilage extracellular matrix proteins such as type II collagen, type IX collagen and aggrecan. These results show potential for the application of the avidin-biotin binding system to cell culture and tissue engineering.

Effects of an Avidin-Biotin Binding System on Chondrocyte Adhesion and Growth on Biodegradable Polymers

Cell adhesion to a scaffold is a prerequisite for tissue engineering. Many studies have been focused on enhancing cell adhesion to synthetic materials that are used for scaffold fabrication. In this study, we applied an avidin-biotin binding system to enhance chondrocyte adhesion to biodegradable polymers. Biotin molecules were conjugated to the cell membrane of chondrocytes, and mediated cell adhesion to avidin-coated surfaces. We demonstrated that immobilization of biotin molecules to chondrocyte surfaces enhanced cell adhesion to avidin-coated biodegradable polymers such as poly(L-lactic acid), poly(D,L-lactic acid), and polycaprolactone, compared to the adhesion of normal chondrocytes to the same type of biodegradable polymer. The biotinylated chondrocytes still maintained their proliferation ability. This study showed the promise of applying the avidin-biotin system in cartilage tissue engineering. [diagram in text].

Improved cellular adhesion to acetone plasma modified polystyrene surfaces

The plasma polymerization of acetone has been used to modify polystyrene substrates for the controlled growth of human fibroblast cells. The surface modified polystyrene was studied by X-ray photoelectron spectroscopy, water contact angle and atomic force microscopy. This showed the surface oxygen levels and wettability to increase rapidly with exposure to the acetone plasma. High-resolution XPS allowed the determination of the relative amounts of surface hydroxyl, carbonyl and carboxyl groups. This showed that there was little incorporation of carboxyl groups in the deposited films. AFM measurements revealed the films to be conformal with a surface roughness equivalent to that of the underlying polystyrene substrate with film growth rates of approximately 0.5 nm min(-1). High edge-definition patterns were produced with a simple masking procedure and allowed the confinement of cells to selected areas of the substrate. These chemically patterned surfaces allowed the study of cells confined to particular regions of the substrate as a function of incubation time.

Biodegradable polymersomes as a basis for artificial cells: encapsulation, release and targeting

The encapsulation of biofunctional compounds, release properties and targetability of polymersomes of amphiphilic block-copolymers based on poly(ethylene glycol) (PEG) and biodegradable polyesters or polycarbonate are described. Carboxyfluorescein (CF), as a model for hydrophilic biofunctional compounds, could be readily incorporated in the polymersomes by adding the compound to the aqueous phase during polymersome preparation. The release of encapsulated material from the polymersomes can be adjusted by changing the copolymer composition, especially the molecular weight and type of hydrophobic block of the copolymer. The presence of plasma proteins other than albumin suppressed the release of CF. CF release in PBS both at room temperature and at 60 degrees C followed first order kinetics, confirming that the CF containing polymersome system is a membrane controlled reservoir system. These biodegradable polymersomes have the potential to be targeted to specific sites in the body as shown by the specific interaction of anti-human serum albumin immobilized polymersomes with a human serum albumin coated sensor surface.