Site-specific delivery of acidic fibroblast growth factor stimulates angiogenic and osteogenic responsesin vivo

Novel scaffold platforms for simultaneous induction osteogenesis and angiogenesis in bone tissue engineering: a cutting-edge approach

Despite the recent advances in the development of bone graft substitutes, treatment of critical size bone defects continues to be a significant challenge, especially in the elderly population. A current approach to overcome this challenge involves the creation of bone-mimicking scaffolds that can simultaneously promote osteogenesis and angiogenesis. In this context, incorporating multiple bioactive agents like growth factors, genes, and small molecules into these scaffolds has emerged as a promising strategy. To incorporate such agents, researchers have developed scaffolds incorporating nanoparticles, including nanoparticulate carriers, inorganic nanoparticles, and exosomes. Current paper provides a summary of the latest advancements in using various bioactive agents, drugs, and cells to synergistically promote osteogenesis and angiogenesis in bone-mimetic scaffolds. It also discusses scaffold design properties aimed at maximizing the synergistic effects of osteogenesis and angiogenesis, various innovative fabrication strategies, and ongoing clinical studies.

Design of 3D Scaffolds for Hard Tissue Engineering: From Apatites to Silicon Mesoporous Materials

Advanced bioceramics for bone regeneration constitutes one of the pivotal interests in the multidisciplinary and far-sighted scientific trajectory of Prof. Vallet Regí. The different pathologies that affect osseous tissue substitution are considered to be one of the most important challenges from the health, social and economic point of view. 3D scaffolds based on bioceramics that mimic the composition, environment, microstructure and pore architecture of hard tissues is a consolidated response to such concerns. This review describes not only the different types of materials utilized: from apatite-type to silicon mesoporous materials, but also the fabrication techniques employed to design and adequate microstructure, a hierarchical porosity (from nano to macro scale), a cell-friendly surface; the inclusion of different type of biomolecules, drugs or cells within these scaffolds and the influence on their successful performance is thoughtfully reviewed.

Cellular Mechanisms of FGF-Stimulated Tissue Repair

Growth factors belonging to the FGF family play important roles in tissue and organ repair after trauma. In this review, I discuss the regulation by FGFs of the aspects of cellular behavior important for reparative processes. In particular, I focus on the FGF-dependent regulation of cell proliferation, cell stemness, de-differentiation, inflammation, angiogenesis, cell senescence, cell death, and the production of proteases. In addition, I review the available literature on the enhancement of FGF expression and secretion in damaged tissues resulting in the increased FGF supply required for tissue repair.

Multimodal treatment combining cold atmospheric plasma and acidic fibroblast growth factor for multi-tissue regeneration

Cold atmospheric plasma (CAP) is an emerging technology for biomedical applications, exemplified by its antimicrobial and antineoplastic potentials. On the contrary, acidic fibroblast growth factor (aFGF) has been a long-standing potent mitogen for cells from various origins. In this study, we are the first to develop a multimodal treatment combining the aforementioned physicochemical and pharmacological treatments and investigated their individual and combined effects on wound healing, angiogenesis, neurogenesis, and osteogenesis. This work was performed at the tissue, cellular, protein, and gene levels, using histochemical staining, flow cytometry, ELISA, and PCR, respectively. Depending on the type of target tissue, various combinations of aforementioned methods were used. The results showed that the enhancement on would healing and angiogenesis by CAP and aFGF were synergistic. The former was manifested by increased murine fibroblast proliferation and reduced cutaneous tissue inflammation, whereas the latter by upregulated proangiogenic markers in vivo, for example, CD31, VEGF, and TGF-β, and downregulated antiangiogenic proteins in vitro, for example, angiostatin and angiopoietin-2, respectively. In addition, aFGF outperformed CAP during neurogenesis, which was evidenced by superior neurite outgrowth, while CAP exceeded aFGF in osteogenesis which was demonstrated by more substantial bone nodule formation. These novel findings not only support the fact that CAP and aFGF are both multipotent agents during tissue regeneration, but also highlight the potential of our multimodal treatment combining the individual advantages of CAP and aFGF. The versatile administration route, that is, topical and/or systemic, might further broaden its applications.

Vascularization Strategies in Bone Tissue Engineering

Bone is a highly vascularized tissue, and its development, maturation, remodeling, and regeneration are dependent on a tight regulation of blood vessel supply. This condition also has to be taken into consideration in the context of the development of artificial tissue substitutes. In classic tissue engineering, bone-forming cells such as primary osteoblasts or mesenchymal stem cells are introduced into suitable scaffolds and implanted in order to treat critical-size bone defects. However, such tissue substitutes are initially avascular. Because of the occurrence of hypoxic conditions, especially in larger tissue substitutes, this leads to the death of the implanted cells. Therefore, it is necessary to devise vascularization strategies aiming at fast and efficient vascularization of implanted artificial tissues. In this review article, we present and discuss the current vascularization strategies in bone tissue engineering. These are based on the use of angiogenic growth factors, the co-implantation of blood vessel forming cells, the ex vivo microfabrication of blood vessels by means of bioprinting, and surgical methods for creating surgically transferable composite tissues.

The role of the fibroblast growth factor family in bone-related diseases

Fibroblast growth factor (FGF) family members are important regulators of cell growth, proliferation, differentiation, and regeneration. The abnormal expression of certain FGF family members can cause skeletal diseases, including achondroplasia, craniosynostosis syndrome, osteoarthritis, and Kashin-Beck disease. Accumulating evidence shows that FGFs play a crucial role in the growth and proliferation of bone and in the pathogenesis of certain bone-related diseases. Here, we review the involvement of FGFs in bone-related processes and diseases; FGF1 in the differentiation of human bone marrow mesenchymal stem cells and fracture repair; FGF2, FGF9, and FGF18 in osteoarthritis; FGF6 in bone and muscle injury; FGF8 in osteoarthritis and Kashin-Beck disease; and FGF21 and FGF23 on bone regulation. These findings indicate that FGFs are targets for novel therapeutic interventions for bone-related diseases.

Fibroblast Growth Factor 1-Transfected Adipose-Derived Mesenchymal Stem Cells Promote Angiogenic Proliferation

The aim of this study was to investigate, for the first time, the effects of using adipose-derived mesenchymal stem cells (AD-MSCs) transfected with an episomal plasmid encoding fibroblast growth factor 1 (FGF1) (AD-MSCsFGF1), in providing the microenvironment required for angiogenic proliferation. The isolated rat AD-MSCs were positive for mesenchymal (CD29 and CD90) and negative for hematopoietic (CD34 and CD45) surface markers. Adipogenic and osteogenic differentiation of the AD-MSCs also occurred in the proper culture media. The presence of FGF1 in the conditioned medium from the AD-MSCsFGF1 was confirmed by Western blotting. G418 and PCR were used for selection of transfected cells and confirmation of the presence of FGF1 mRNA, respectively. Treatment with the AD-MSCFGF1-conditioned medium significantly increased the NIH-3T3 cell proliferation and human umbilical vein endothelial cell (HUVEC) tube formation compared to conditioned medium from nontransfected AD-MSCs (p < 0.001). In conclusion, the AD-MSCsFGF1 efficiently secreted functional FGF1, which promoted angiogenic proliferation. Using AD-MSCsFGF1 may provide a useful strategy in cell therapy, which can merge the beneficial effects of stem cells with the positive biological effects of FGF1 in various disorders, especially tissue defects, neurodegenerative, cardiovascular and diabetes endocrine pathologies, which remain to be tested in preclinical and clinical studies.

Controlled protein delivery in the generation of microvascular networks

Rapid induction and stabilization of new microvascular networks is essential for the proper functioning of engineered tissues. Many efforts to achieve this goal have used proangiogenic proteins-such as vascular endothelial growth factors-to induce the formation of new microvessels. These proteins have demonstrated promise in improving vascularization, but it is also clear that the spatial and temporal presentation of these signals is important for achieving proper vascular function. Delivery systems that present proteins in a localized and sustained manner, can promote the formation and stabilization of microvascular networks by precisely presenting proangiogenic proteins at desired locations, and for specified durations. Further, these systems allow for some control over the sequence of release of multiple proteins, and it has become clear that such coordination is critical for the development of fully functional and mature vascular structures. This review focuses on the actions of proangiogenic proteins and the innovations in controlled release technologies that precisely deliver these to stimulate microvascular network formation and stabilization.

In vitro differentiation and mineralization of dental pulp stem cells on enamel-like fluorapatite surfaces

Our previous studies have shown good biocompatibility of fluorapatite (FA) crystal surfaces in providing a favorable environment for functional cell-matrix interactions of human dental pulp stem cells (DPSCs) and also in supporting their long-term growth. The aim of the current study was to further investigate whether this enamel-like surface can support the differentiation and mineralization of DPSCs, and, therefore, act as a potential model for studying the enamel/dentin interface and, perhaps, dentine/pulp regeneration in tooth tissue engineering. The human pathway-focused osteogenesis polymerase chain reaction (PCR) array demonstrated that the expression of osteogenesis-related genes of human DPSCs was increased on FA surfaces compared with that on etched stainless steel (SSE). Consistent with the PCR array, FA promoted mineralization compared with the SSE surface with or without the addition of a mineralization promoting supplement (MS). This was confirmed by alkaline phosphatase (ALP) staining, Alizarin red staining, and tetracycline staining for mineral formation. In conclusion, FA crystal surfaces, especially ordered (OR) FA surfaces, which mimicked the physical architecture of enamel, provided a favorable extracellular matrix microenvironment for the cells. This resulted in the differentiation of human DPSCs and mineralized tissue formation, and, thus, demonstrated that it may be a promising biomimetic model for dentin-pulp tissue engineering.

The stimulation of adipose-derived stem cell differentiation and mineralization by ordered rod-like fluorapatite coatings

In this study, the effect of ordered rod-like FA coatings of metal discs on adipose-derived stem cell (ASC)'s growth, differentiation and mineralization was studied in vitro; and their mineral inductive effects in vivo. After 3 and 7 days, the cell number on the metal surfaces was significantly higher than those on the ordered and disordered FA surfaces. However, after 4 weeks much greater amounts of mineral formation was induced on the two FA surfaces with and even without osteogenesis induction. The osteogenic profiles showed the up regulation of a set of pro-osteogenic transcripts and bone mineralization phenotypic markers when the ASCs were grown on FA surfaces compared to metal surfaces at 7 and 21 days. In addition to BMP and TGFβ signaling pathways, EGF and FGF pathways also appeared to be involved in ASC differentiation and mineralization. In vivo studies showed accelerated and enhanced mineralized tissue formation integrated within ordered FA coatings. After 5 weeks, over 80% of the ordered FA coating was integrated with a mineralized tissue layer covering the implants. Both the intrinsic properties of the FA crystals and the topography of the FA coating appeared to dominate the cell differentiation and mineralization process.

Immobilization and bioactivity evaluation of FGF-1 and FGF-2 on powdered silicon-doped hydroxyapatite and their scaffolds for bone tissue engineering

Fibroblast growth factors (FGFs) are polypeptides that control the proliferation and differentiation of various cell types including osteoblasts. FGFs are also strong inducers of angiogenesis, necessary to obtain oxygen and nutrients during tissue repair. With the aim to incorporate these desirable FGF biological properties into bioceramics for bone repair, silicon substituted hydroxyapatites (Si-HA) were used as materials to immobilize bioactive FGF-1 and FGF-2. Thus, the binding of these growth factors to powdered Si-HA and Si-HA scaffolds was carried out efficiently in the present study and both FGFs maintained its biological activity on osteoblasts after its immobilization. The improvement of cell adhesion and proliferation onto Si-HA scaffolds suggests the potential utility of these FGF/scaffolds for bone tissue engineering.

Fibroblast growth factors: biology, function, and application for tissue regeneration

Fibroblast growth factors (FGFs) that signal through FGF receptors (FGFRs) regulate a broad spectrum of biological functions, including cellular proliferation, survival, migration, and differentiation. The FGF signal pathways are the RAS/MAP kinase pathway, PI3 kinase/AKT pathway, and PLCγ pathway, among which the RAS/MAP kinase pathway is known to be predominant. Several studies have recently implicated the in vitro biological functions of FGFs for tissue regeneration. However, to obtain optimal outcomes in vivo, it is important to enhance the half-life of FGFs and their biological stability. Future applications of FGFs are expected when the biological functions of FGFs are potentiated through the appropriate use of delivery systems and scaffolds. This review will introduce the biology and cellular functions of FGFs and deal with the biomaterials based delivery systems and their current applications for the regeneration of tissues, including skin, blood vessel, muscle, adipose, tendon/ligament, cartilage, bone, tooth, and nerve tissues.

Apatite Containing Aspartic Acid for Selective Protein Loading

Physico-chemical modifications of hydroxyapatite (HAp) materials are considered as pre-requisites for the development of new bioactive carrier materials for drug delivery and tissue engineering applications. Since acidic amino acids have well-documented affinities to both HAp and basic proteins, HAp modified by aspartic acid (Asp, acidic amino acid) might be one of the candidate substrates for a basic protein carrier. Here, we synthesized HAp in the presence of various concentrations of Asp and observed that HAp crystallinity and other physico-chemical properties were effectively modulated. Detailed studies indicated that Asp was not incorporated in the HAp crystal lattice, but rather was trapped in HAp crystals. Protein adsorption studies indicated that the HAp particles modified by Asp had a selective loading capacity for basic protein. Therefore, HAp particles containing Asp might have potential in drug delivery applications, especially as the carrier of basic proteins including bFGF and BMP.

Organic-inorganic composites for bone drug delivery

This review paper attempts to provide an overview in the fabrication and application of organic-inorganic based composites in the field of local drug delivery for bone. The concept of local drug delivery exists for a few decades. However, local drug delivery in bone and specially application of composites for delivery of drugs to bone is an area for potential research interest in the recent time. The advantages attained by an organic-inorganic composite when compared to its individual components include their ability to release drug, adopting to the natural environment and supporting local area until complete bone regeneration, which make them carriers of interest for local drug delivery for bone.

Fracture healing and bone repair: an update

Bone healing represents a physiological process of repair and restoration of function. Recent advances in a variety of medical disciplines have enabled scientists and clinicians to characterise this phenomenon at the molecular level. A number of molecular mediators and cells interact utilising different pathways. Despite the involvement of many local and systemic factors failure of the naturally occurring mechanisms can occur leading to either delayed union or non-union. This review article is focused on the recent understanding of the mechanisms governing the bone repair process.

Global burden of trauma: Need for effective fracture therapies

Orthopedic trauma care and fracture management have advanced significantly over the last 50 years. New developments in the biology and biomechanics of the musculoskeletal system, fixation devices, and soft tissue management have greatly influenced our ability to care for musculoskeletal injuries. Many therapies and treatment modalities have the potential to transform future orthopedic treatment by decreasing invasive procedures and providing shorter healing times. Promising results in experimental models have led to an increase in clinical application of these therapies in human subjects. However, for many modalities, precise clinical indications, timing, dosage, and mode of action still need to be clearly defined. In order to further develop fracture management strategies, predict outcomes and improve clinical application of newer technologies, further research studies are needed. Together with evolving new therapies, the strategies to improve fracture care should focus on cost effectiveness. This is a great opportunity for the global orthopedic community, in association with other stakeholders, to address the many barriers to the delivery of safe, timely, and effective care for patients with musculoskeletal injuries in developing countries.

Effect of celecoxib on E-cadherin, VEGF, Microvessel density and apoptosis in gastric cancer

Cyclooxygenase-2 (COX-2) plays a crucial role in the development and invasion of gastric cancer. COX-2 inhibitors have been shown to be chemopreventive against gastrointestinal cancers. In vitro studies have suggested that the mechanisms may be related to induction of apoptosis and inhibition of angiogenesis. COX-2 may also have impact on E-cadherin. In our study we investigate the effect of Celecoxib on expression of E-cadherin and serum soluble E-cadherin, as well as on apoptosis and angiogenesis in patients with gastric cancer. Fifty nine gastric cancer patients were randomly divided into two groups: Surgery group (n = 22), in which patients underwent surgical resection after diagnosis, and Celecoxib + Surgery group (n = 37), in which patients received oral Celecoxib 200 mg twice daily for 7 days before curative resection. Twenty healthy subjects (Healthy controls) were recruited as normal controls. After curative resection, COX-2, E-cadherin, VEGF, and MVD were detected by immunohistochemistry. Serum soluble E-cadherin was quantitatively measured using a commercially available enzyme-linked immunosorbent assay kit. Apoptosis was determined by TUNEL assay. Significantly decreased expression of COX-2, increased E-cadherin and apoptosis, decreased VEGF and MVD were observed in gastric cancer tissues from patients receiving Celecoxib compared to Surgery group. Compared to Healthy controls, the serum soluble E cadherin levels were higher in gastric cancer patients which were decreased by Celecoxib. This in vivo study demonstrated that Celecoxib induces apoptosis and inhibit angiogenesis of gastric cancer. Its impact on E-cadherin may suggest that this agent may suppress the invasion of advanced gastric cancer.

A novel poly(ethylene glycol)–fibrinogen hydrogel for tibial segmental defect repair in a rat model

The aim of this study is to investigate regeneration in a segmental bone defect using a novel fibrinogen-based hydrogel material. The use of hydrogels made from poly(ethylene glycol) (PEG) conjugated to fibrinogen for this purpose may be better to conventional fibrin-based materials as it offers an additional degree of control over the structural characteristics and biodegradation of the material. At the same time, it maintains some of the inherent biofunctionality of the fibrinogen molecule. PEGylated fibrinogen hydrogels with various degrees of proteolytic resistance based on PEG and fibrinogen composition were designed for slow, intermediate, and fast biodegradation. The hydrogels were implanted into 7-mm segmental rat tibial defects without additional osteoinductive factors with the rationale that the ingrowth matrix will displace the normal fibrin clot while sustaining a similar healing effect for a longer duration. Histological and X-ray results confirmed that the extent and distribution of newly formed bone in the defect after 5 weeks strongly parallels the biodegradation pattern of the implanted material. When compared to nonunions in animals treated with the fast-degrading implants and untreated control animals, the rats implanted with the intermediate-degrading material exhibited osteoneogenesis. This data supports the hypothesis that the perseverance of the PEGylated fibrinogen material can be synchronized with the optimal healing characteristics of a segmental osseous defect and that the consequent sustained release of fibrinogen fragments facilitates the osteogenic response at the injury site. The PEGylated fibrinogen material may, therefore, be a highly efficacious material for promoting the healing of bone defects and especially nonunion fractures.

Small molecule inducers of angiogenesis for tissue engineering

Engineering of implantable tissues requires rapid induction of angiogenesis to meet the significant oxygen and nutrient demands of cells during tissue repair. To this end, our laboratories have utilized medicinal chemistry to synthesize non-peptide-based inducers of angiogenesis to aid tissue engineering. In this study, we describe the evaluation of SC-3-149, a small molecule compound with proliferative effects on vascular endothelial cells. Specifically, exogenous exposure of SC-3-149 induced an 18-fold increase in proliferation of human microvascular endothelial cells in vitro at low micromolar potency by day 14 in culture. Moreover, SC-3-149 significantly increased the formation of endothelial cord and tubelike structures in vitro, and improved endothelial scratch wound healing within 24 h. SC-3-149 also significantly inhibited vascular endothelial cell death owing to serum deprivation and high acidity (pH 6). Concurrent incubation of SC-3-149 with vascular endothelial growth factor increased cell survivability under serum-deprived conditions by an additional 7%. In addition, in vivo injection of SC-3-149 into the rat mesentery produced qualitative increases in microvessel length density. Taken together, our studies suggest that SC-3-149 and its analogs may serve as promising new angiogenic agents for targeted drug delivery and therapeutic angiogenesis in tissue engineering.

Highly stable mutants of human fibroblast growth factor-1 exhibit prolonged biological action

Fibroblast growth factor 1 (FGF-1) shows strong angiogenic, osteogenic and tissue-injury repair properties that might be relevant to medical applications. Since FGF-1 is partially unfolded at physiological temperature we decided to increase significantly its conformational stability and test how such an improvement will affect its biological function. Using an homology approach and rational strategy we designed two new single FGF-1 mutations: Q40P and S47I that appeared to be the most strongly stabilizing substitutions among those reported so far, increasing the denaturation temperature by 7.8 deg. C and 9.0 deg. C, respectively. As our goal was to produce highly stable variants of the growth factor, we combined these two mutations with five previously described stabilizing substitutions. The multiple mutants showed denaturation temperatures up to 27 deg. C higher than the wild-type and exhibited full additivity of the mutational effects. All those mutants were biologically competent in several cell culture assays, maintaining typical FGF-1 activities, such as binding to specific cell surface receptors and activation of downstream signaling pathways. Thus, we demonstrate that the low denaturation temperature of wild-type FGF-1 is not related to its fundamental cellular functions, and that FGF-1 action is not affected by its stability. A more detailed analysis of the biological behavior of stable FGF-1 mutants revealed that, compared with the wild-type, their mitogenic properties, as probed by the DNA synthesis assay, were significantly increased in the absence of heparin, and that their half-lives were extensively prolonged. We found that the biological action of the mutants was dictated by their susceptibility to proteases, which strongly correlated with the stability. Mutants which were much more resistant to proteolytic degradation always displayed a significant improvement in the half-life and mitogenesis. Our results show that engineered stable growth factor variants exhibit enhanced and prolonged activity, which can be advantageous in terms of the potential therapeutic applications of FGF-1.