Crosslinking and Swelling Properties of pH-Responsive Poly(Ethylene Glycol)/Poly(Acrylic Acid) Interpenetrating Polymer Network Hydrogels

This study investigates the crosslinking dynamics and swelling properties of pH-responsive poly(ethylene glycol) (PEG)/poly(acrylic acid) (PAA) interpenetrating polymer network (IPN) hydrogels. These hydrogels feature denser crosslinked networks compared to PEG single network (SN) hydrogels. Fabrication involved a two-step UV curing process: First, forming PEG-SN hydrogels using poly(ethylene glycol) diacrylate (PEGDA) through UV-induced free radical polymerization and crosslinking reactions, then immersing them in PAA solutions with two different molar ratios of acrylic acid (AA) monomer and poly(ethylene glycol) dimethacrylate (PEGDMA) crosslinker. A subsequent UV curing step created PAA networks within the pre-fabricated PEG hydrogels. The incorporation of AA with ionizable functional groups imparted pH sensitivity to the hydrogels, allowing the swelling ratio to respond to environmental pH changes. Rheological analysis showed that PEG/PAA IPN hydrogels had a higher storage modulus (G') than PEG-SN hydrogels, with PEG/PAA-IPN5 exhibiting the highest modulus. Thermal analysis via thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC) indicated increased thermal stability for PEG/PAA-IPN5 compared to PEG/PAA-IPN1, due to higher crosslinking density from increased PEGDMA content. Consistent with the storage modulus trend, PEG/PAA-IPN hydrogels demonstrated superior mechanical properties compared to PEG-SN hydrogels. The tighter network structure led to reduced water uptake and a higher gel modulus in swollen IPN hydrogels, attributed to the increased density of active network strands. Below the pKa (4.3) of acrylic acid, hydrogen bonds between PEG and PAA chains caused the IPN hydrogels to contract. Above the pKa, ionization of PAA chains induced electrostatic repulsion and osmotic forces, increasing water absorption. Adjusting the crosslinking density of the PAA network enabled fine-tuning of the IPN hydrogels' properties, allowing comprehensive comparison of single network and IPN characteristics.

Sustained release delivery of favipiravir through statistically optimized, chemically cross-linked, pH-sensitive, swellable hydrogel

In the current work, favipiravir (an antiviral drug) loaded pH-responsive polymeric hydrogels were developed by the free redical polymerization technique. Box-Behnken design method via Design Expert version 11 was employed to furnish the composition of all hydrogel formulations. Here, polyethylene glycol (PEG) has been utilized as a polymer, acrylic acid (AA) as a monomer, and potassium persulfate (KPS) and methylene-bisacrylamide (MBA) as initiator and cross-linker, respectively. All networks were evaluated for in-vitro drug release (%), sol-gel fraction (%), swelling studies (%), porosity (%), percentage entrapment efficiency, and chemical compatibilities. According to findings, the swelling was pH sensitive and was shown to be greatest at a pH of 6.8 (2500%). The optimum gel fraction offered was 97.8%. A sufficient porosity allows the hydrogel to load a substantial amount of favipiravir despite its hydrophobic behavior. Hydrogels exhibited maximum entrapment efficiency of favipiravir upto 98%. The in-vitro release studies of drug-formulated hydrogel revealed that the drug release from hydrogel was between 85 to 110% within 24 h. Drug-release kinetic results showed that the Korsmeyer Peppas model was followed by most of the developed formulations based on the R2 value. In conclusion, the hydrogel-based technology proved to be an excellent option for creating the sustained-release dosage form of the antiviral drug favipiravir.

Strong, elastic and degradation-tolerated hydrogels composed of chitosan, silk fibroin and bioglass nanoparticles with factor-bestowed activity for bone tissue engineering

Polymer hydrogels intended for use in bone repair need to be strong, elastic, and capable of enduring degradation. However, many natural polymer hydrogels lack these essential properties and thus, are unsuitable for bone repair applications. Here, a new type of multi-network hydrogel with improved mechanical and degradation-resistant properties has been developed for use in bone repair. The hydrogel is composed of thiolated chitosan (TCH), silk fibroin (SF), and thiolated bioglass (TBG) nanoparticles (NPs). The multi-networks are built through sulfhydryl self-crosslinking, diepoxide crosslinker-involved linkages of amino or hydroxyl groups, and enzyme-mediated phenol hydroxyl crosslinking. Additionally, mesoporous TBG NPs serve as a vehicle for loading stromal cell-derived factor-1 (SDF-1) to provide the gel with cell-recruiting activity. The formulated TCH/SF/TBG hydrogels exhibit remarkably enhanced strength, elasticity, and improved degradation tolerance compared to some gels made from only TCH or SF. Furthermore, TCH/SF/TBG gels can support the growth of seeded cells and the deposition of matrix components. Some TCH/SF/TBG gels also demonstrate the ability to release SDF-1 in an approximately linear manner for a few weeks while retaining the chemotactic properties of the released SDF-1. Overall, the multi-network hydrogel has the potential as an in situ forming material for cell-recruiting bone repair and regeneration.

High-Quantum-Yield Ultrasmall Ln2O3 (Ln = Eu, Tb, or Dy) Nanoparticle Colloids in Aqueous Media Obtained via Photosensitization

Fluorescent nanoparticles used in biomedical applications should be stable in their colloidal form in aqueous media and possess a high quantum yield (QY). We report ultrasmall Ln2O3 (Ln = Eu, Tb, or Dy) nanoparticle colloids with high QYs in aqueous media. The nanoparticles are grafted with hydrophilic and biocompatible poly(acrylic acid) (PAA) to ensure colloidal stability and biocompatibility and with organic photosensitizer 2,6-pyridinedicarboxylic acid (PDA) for achieving a high QY. The PAA/PDA-Ln2O3 nanoparticle colloids were nearly monodispersed and ultrasmall (particle diameter: ∼2 nm). They exhibited excellent colloidal stability with no precipitation after synthesis (>1.5 years) in aqueous media, very low cellular toxicity, and very high absolute QYs of 87.6, 73.6, and 2.8% for Ln = Eu, Tb, and Dy, respectively. These QYs are the highest reported so far for lanthanides in aqueous media. Therefore, the results suggest their high potential as sensitive optical or imaging probes in biomedical applications.

Facile Synthesis and X-ray Attenuation Properties of Ultrasmall Platinum Nanoparticles Grafted with Three Types of Hydrophilic Polymers

Ultrasmall platinum nanoparticles (Pt-NPs) grafted with three types of hydrophilic and biocompatible polymers, i.e., poly(acrylic acid), poly(acrylic acid-co-maleic acid), and poly(methyl vinyl ether-alt-maleic acid) were synthesized using a one-pot polyol method. Their physicochemical and X-ray attenuation properties were characterized. All polymer-coated Pt-NPs had an average particle diameter (davg) of 2.0 nm. Polymers grafted onto Pt-NP surfaces exhibited excellent colloidal stability (i.e., no precipitation after synthesis for >1.5 years) and low cellular toxicity. The X-ray attenuation power of the polymer-coated Pt-NPs in aqueous media was stronger than that of the commercial iodine contrast agent Ultravist at the same atomic concentration and considerably stronger at the same number density, confirming their potential as computed tomography contrast agents.

Safe magnetic resonance imaging on biocompatible nanoformulations

Magnetic resonance imaging (MRI) holds promise for the early clinical diagnosis of various diseases, but most clinical MR techniques require the use of a contrast medium. Several nanomaterial (NM) mediated contrast agents (CAs) are widely used as T1- and T2-based MR contrast agents for clinical and non-clinical applications. Unfortunately, most NM-based CAs are toxic or non-biocompatible, restricting their practical/clinical applications. Therefore, the development of nontoxic and biocompatible CAs for clinical MRI diagnosis is highly desired. To this end, several biocompatible and biomimetic strategies have been developed to offer long blood circulation time, significant biocompatibility, in vivo biodistribution and high contrast ability for efficient imaging. However, detailed review reports on biocompatible NMs, specifically for MR imaging have not yet been summarized. Thus, in the present review we summarize  various surface coating strategies (such as polymers, proteins, cell membranes, etc.) to achieve biocompatible NPs, providing a detailed discussion of advances and future prospects for safe MRI imaging.

Enhanced Tumor Imaging Using Glucosamine-Conjugated Polyacrylic Acid-Coated Ultrasmall Gadolinium Oxide Nanoparticles in Magnetic Resonance Imaging

Owing to a higher demand for glucosamine (GlcN) in metabolic processes in tumor cells than in normal cells (i.e., GlcN effects), tumor imaging in magnetic resonance imaging (MRI) can be highly improved using GlcN-conjugated MRI contrast agents. Here, GlcN was conjugated with polyacrylic acid (PAA)-coated ultrasmall gadolinium oxide nanoparticles (UGONs) (davg = 1.76 nm). Higher positive (brighter or T1) contrast enhancements at various organs including tumor site were observed in human brain glioma (U87MG) tumor-bearing mice after the intravenous injection of GlcN-PAA-UGONs into their tail veins, compared with those obtained with PAA-UGONs as control, which were rapidly excreted through the bladder. Importantly, the contrast enhancements of the GlcN-PAA-UGONs with respect to those of the PAA-UGONs were the highest in the tumor site owing to GlcN effects. These results demonstrated that GlcN-PAA-UGONs can serve as excellent T1 MRI contrast agents in tumor imaging via GlcN effects.

Synthesis, Characterizations, and 9.4 Tesla T2 MR Images of Polyacrylic Acid-Coated Terbium(III) and Holmium(III) Oxide Nanoparticles

Polyacrylic acid (PAA)-coated lanthanide oxide (Ln2O3) nanoparticles (NPs) (Ln = Tb and Ho) with high colloidal stability and good biocompatibility were synthesized, characterized, and investigated as a new class of negative (T2) magnetic resonance imaging (MRI) contrast agents at high MR fields. Their r2 values were appreciable at a 3.0 T MR field and higher at a 9.4 T MR field, whereas their r1 values were negligible at all MR fields, indicating their exclusive induction of T2 relaxations with negligible induction of T1 relaxations. Their effectiveness as T2 MRI contrast agents at high MR fields was confirmed from strong negative contrast enhancements in in vivo T2 MR images at a 9.4 T MR field after intravenous administration into mice tails.

In vitro anti-inflammatory potential of marine macromolecules cross-linked bio-composite scaffold on LPS stimulated RAW 264.7 macrophage cells for cartilage tissue engineering applications

Biomaterials serve as an integral component of tissue engineering. They are designed to provide architectural framework of native extracellular matrix so as to encourage cell growth and eventual tissue regeneration. Naturally occurring biopolymers as scaffolds offer options for cartilage tissue engineering due to anti-inflammatory, biocompatibility, biodegradability, low toxicity of degradation by-products and plasticity in processing into a variety of material formats. Here we studied in vitro anti-inflammatory potential of marine macromolecules cross-linked bio-composite scaffold composed of hydroxyapatite, alginate, chitosan and fucoidan named as HACF on LPS stimulated RAW 264.7 macrophage cells. The effects of HACF on the viability of RAW264.7 cells, nitrite level, intracellular ROS as well as the mRNA levels of NF-κB, iNOS, COX-2, TNF-α, IL-1β and IL-6 were examined in LPS induced RAW264.7 macrophage cells. The results revealed that HACF hydrogel scaffold exerts anti-inflammatory effect by inhibiting the production of ROS, suppress NF-kB translocation to the nucleus and thereby inhibiting the production of inflammatory mediators. Hence, our results confirm that HACF has a strong anti-oxidant capacity to inhibit inflammation associated gene expression by suppressing NF-kB signaling pathway. It clearly reveals the anti-oxidant and anti-inflammatory effect of HACF hydrogel scaffold on LPS induced RAW 264.7 cells.

Mechanical Properties of Double Network Poly (Acrylic Acid) Based Hydrogels for Potential Use as a Biomaterial

Load-bearing applications of hydrogels include soft robots, tissue engineering, and stretchable electronics. This paper presents an extensive study of double network poly (acrylic acid) based hydrogel on stress relaxation, compression fatigue, shear stress, and shock absorption properties as a potential load-bearing soft tissue replacement biomaterial. Double network poly (acrylic acid) hydrogel was selected due to simple processing and availability. The optimized formulation of poly (acrylic acid) hydrogel was used for samples preparation. The compression modulus varied with hydrogel formulation, crosshead speed and swelled amount of the hydrogel. Stress relaxation and shock absorption properties of hydrogel were compared with polyurethane gel used in soft insoles (Shore 5A). Developed hydrogel displayed good fatigue properties up to 10,000 loading cycle at maximum stress of 390±30 kPa and at 84±4% strain. Further, maximum average shear stress and shear modulus of 80 kPa and 140 kPa respectively were observed at 84% strain before fracture.

In vivo neutron capture therapy of cancer using ultrasmall gadolinium oxide nanoparticles with cancer-targeting ability

Gadolinium neutron capture therapy (GdNCT) is considered as a new promising cancer therapeutic technique. Nevertheless, limited GdNCT applications have been reported so far. In this study, surface-modified ultrasmall gadolinium oxide nanoparticles (UGNPs) with cancer-targeting ability (d_avg = 1.8 nm) were for the first time applied to the in vivo GdNCT of cancer using nude model mice with cancer, primarily because each nanoparticle can deliver hundreds of Gd to the cancer site. For applications, the UGNPs were grafted with polyacrylic acid (PAA) for biocompatibility and colloidal stability, which was then conjugated with cancer-targeting arginylglycylaspartic acid (RGD) (shortly, RGD-PAA-UGNPs). The solution sample was intravenously administered into the tails of nude model mice with cancer. At the time of the maximum accumulation of the RGD-PAA-UGNPs at the cancer site, which was monitored using magnetic resonance imaging, the thermal neutron beam was locally irradiated onto the cancer site and the cancer growth was monitored for 25 days. The cancer growth suppression was observed due to the GdNCT effects of the RGD-PAA-UGNPs, indicating that the surface-modified UGNPs with cancer-targeting ability are potential materials applicable to the in vivo GdNCT of cancer.

A cancer growth suppression was observed due to the GdNCT effects of the RGD-PAA-UGNPs.

Immunocompatibility of poly(ethylene glycol)-penetrated alginate–chitosan hydrogels

Scaffold-guided tissue regeneration using hydrogels has been emerging as an ideal alternative for the management of terminal-stage organ damage. Design of scaffolds for tissue regrowth mainly focuses on their immuno/biocompatibility as well as physiochemical characteristics. The focus of this study is on the biocompatibility evaluations of a panel of four hydrogel scaffolds fabricated using alginate, chitosan and hydroxyapatite reinforced with poly(ethylene glycol). The hydrogels were subsequently cross-linked with calcium ions and glutaraldehyde. Immunocompatibility was assessed by interacting Raw 264.7 cell lines with these hydrogels. MTT cell viability assay revealed the non-cytotoxic nature of the hydrogels, and the macrophages grown in contact with the hydrogels exhibited no alteration in their morphology and were similar to the untreated normal cells. The concentration of nitric oxide, activity of myeloperoxidase and the messenger ribonucleic acid transcripts of proinflammatory cytokines, interleukin 6 and tumour necrosis factor alpha exhibited no considerable increase in the macrophages cultured with the hydrogels when compared to lipopolysaccharide-stimulated cells. In short, the absence of macrophage activation on contact with hydrogels is a clear indication of their in vitro immunocompatibility, suggesting their potential application as tissue engineering templates.

Stable and non-toxic ultrasmall gadolinium oxide nanoparticle colloids (coating material = polyacrylic acid) as high-performance T1 magnetic resonance imaging contrast agents

For use as positive (T₁) magnetic resonance imaging contrast agents (MRI-CAs), gadolinium oxide (Gd₂O₃) nanoparticle colloids (i.e. nanoparticles coated with hydrophilic ligands) should be stable, non-toxic, and ultrasmall in particle diameter for renal excretion. In addition, they should have a high longitudinal water proton relaxivity (r₁) and r₂/r₁ ratio that is close to one (r₂ = transverse water proton relaxivity) for high-performance. In this study, we report ultrasmall Gd₂O₃ nanoparticle colloids [coating material = polyacrylic acid, M_w = ∼5100 Da] satisfying these conditions. The particle diameter was monodisperse with an average value of 2.0 ± 0.1 nm. The colloidal suspension exhibited a high r₁ value of 31.0 ± 0.1 s⁻¹ mM⁻¹ and r₂/r₁ ratio of 1.2, where r₁ was ∼8 times higher than that of commercial Gd-chelates: the cooperative induction model was proposed to explain this. The effectiveness of the colloidal suspension as a high-performance T₁ MRI-CA was confirmed by taking in vivo T₁ MR images in a mouse after intravenous administration. Highly positive contrast enhancements were observed in various organs of the mouse such as the liver, kidneys, and bladder. The colloidal suspension was then excreted through the bladder.

Stable and non-toxic ultrasmall Gd₂O₃ nanoparticle colloids as high-performance T₁ MRI-CA were developed.

Magnetic resonance imaging, gadolinium neutron capture therapy, and tumor cell detection using ultrasmall Gd2O3 nanoparticles coated with polyacrylic acid-rhodamine B as a multifunctional tumor theragnostic agent

Monodisperse and ultrasmall gadolinium oxide (Gd₂O₃) nanoparticle colloids (d_avg = 1.5 nm) (nanoparticle colloid = nanoparticle coated with hydrophilic ligand) were synthesized and their performance as a multifunctional tumor theragnostic agent was investigated. The aqueous ultrasmall nanoparticle colloidal suspension was stable and non-toxic owing to hydrophilic polyacrylic acid (PAA) coating that was partly conjugated with rhodamine B (Rho) for an additional functionalization (mole ratio of PAA : Rho = 5 : 1). First, the ultrasmall nanoparticle colloids performed well as a powerful T₁ magnetic resonance imaging (MRI) contrast agent: they exhibited a very high longitudinal water proton relaxivity (r₁) of 22.6 s⁻¹ mM⁻¹ (r₂/r₁ = 1.3, r₂ = transverse water proton relaxivity), which was ∼6 times higher than those of commercial Gd-chelates, and high positive contrast enhancements in T₁ MR images in a nude mouse after intravenous administration. Second, the ultrasmall nanoparticle colloids were applied to gadolinium neutron capture therapy (GdNCT) in vitro and exhibited a significant U87MG tumor cell death (28.1% net value) after thermal neutron beam irradiation, which was 1.75 times higher than that obtained using commercial Gadovist. Third, the ultrasmall nanoparticle colloids exhibited stronger fluorescent intensities in tumor cells than in normal cells owing to conjugated Rho, proving their pH-sensitive fluorescent tumor cell detection ability. All these results together demonstrate that ultrasmall Gd₂O₃ nanoparticle colloids are the potential multifunctional tumor theragnostic agent.

Ultrasmall Gd₂O₃ nanoparticle colloids coated with PAA and Rho-PAA were synthesized and applied to T₁ MRI, GdNCT and fluorescent tumor cell detection.

Theranostic Iron Oxide/Gold Ion Nanoprobes for MR Imaging and Noninvasive RF Hyperthermia

This work focuses on the development of a nanoparticulate system that can be used for magnetic resonance (MR) imaging and E-field noninvasive radiofrequency (RF) hyperthermia. For this purpose, an amine-functional gold ion complex (GIC), [Au(III)(diethylenetriamine)Cl]Cl₂, which generates heat upon RF exposure, was conjugated to carboxyl-functional poly(acrylic acid)-capped iron-oxide nanoparticles (IO-PAA NPs) to form IO-GIC NPs of size ∼100 nm. The multimodal superparamagnetic IO-GIC NPs produced T2-contrast on MR imaging and unlike IO-PAA NPs generated heat on RF exposure. The RF heating response of IO-GIC NPs was found to be dependent on the RF power, exposure period, and particle concentration. IO-GIC NPs at a concentration of 2.5 mg/mL showed a high heating response (δT) of ∼40 °C when exposed to 100 W RF power for 1 min. In vitro cytotoxicity measurements on NIH-3T3 fibroblast cells and 4T1 cancer cells showed that IO-GIC NPs are cytocompatible at high NP concentrations for up to 72 h. Upon in vitro RF exposure (100 W, 1 min), a high thermal response leads to cell death of 4T1 cancer cells incubated with IO-GIC NPs (1 mg/mL). Hematoxylin and eosin imaging of rat liver tissues injected with 100 μL of 2.5 mg/mL IO-GIC NPs and exposed to low RF power of 20 W for 10 min showed significant loss of tissue morphology at the site of injection, as against RF-exposed or nanoparticle-injected controls. In vivo MR imaging and noninvasive RF exposure of 4T1-tumor-bearing mice after IO-GIC NP administration showed T2 contrast enhancement and a localized generation of high temperatures in tumors, leading to tumor tissue damage. Furthermore, the administration of IO-GIC NPs followed by RF exposure showed no adverse acute toxicity effects in vivo. Thus, IO-GIC NPs show good promise as a theranostic agent for magnetic resonance imaging and noninvasive RF hyperthermia for cancer.

Synergistic Interactions of a Synthetic Lubricin-Mimetic with Fibronectin for Enhanced Wear Protection

Lubricin (LUB), a major mucinous glycoprotein of mammalian synovial fluids, is believed to provide excellent lubrication to cartilage surfaces. Consequently, when joint disease or replacement leads to increased friction and surface damage in the joint, robust synthetic LUB alternatives that could be used therapeutically to improve lubrication and surface protection are needed. Here, we report the characterization of a lubricating multiblock bottlebrush polymer whose architecture was inspired by LUB, and we investigate the role of fibronectin (FN), a glycoprotein found in the superficial zone of cartilage, in mediating the tribological properties of the polymer upon shear between mica surfaces. Our surface forces apparatus (SFA) normal force measurements indicate that the lubricin-mimetic (mimLUB) could be kept anchored between mica surfaces, even under high contact pressures, when an intermediate layer of FN was present. Additional SFA friction measurements show that FN would also extend the wearless friction regime of the polymer up to pressures of 3.4 MPa while ensuring stable friction coefficients (μ ≈ 0.28). These results demonstrate synergistic interactions between mimLUB and FN in assisting the lubrication and wear protection of ideal (mica) substrates upon shear. Collectively, these findings suggest that our proposed mimLUB might be a promising alternative to LUB, as similar mechanisms could potentially facilitate the interaction between the polymer and cartilage surfaces in articular joints and prosthetic implants in vivo.

Photochemically Induced Folding of Single Chain Polymer Nanoparticles in Water

We pioneer the synthesis of fluorescent single chain nanoparticles (SCNPs) via UV-light induced folding based on tetrazole chemistry directly in pure water. Water-soluble photoreactive precursor polymers based on poly(acrylic acid) (PAA) bearing tetrazole, alkene and tetraethylene glycol monomethyl ether moieties, (PAA_n(Tet/p-Mal/TEG)), or simply tetrazoles moieties, PAA_n(Tet), were generated via RAFT polymerization. While tetrazole, ene, and acrylic acid containing polymers fold via dual nitrile imine-mediated tetrazole-ene cycloaddition (NITEC) as well as nitrile imine-carboxylic acid ligation (NICAL), tetrazole and acrylic acid only functional prepolymers fold exclusively via NICAL. A detailed study of the underpinning photochemistry of NITEC and NICAL is also included. The resulting water-soluble SCNPs were carefully characterized via analytical techniques such as NMR, UV-vis, and fluorescence spectroscopy, as well as SEC and DLS.

RAW 264.7 co-cultured with ultra-high molecular weight polyethylene particles spontaneously differentiate into osteoclasts: an in vitro model of periprosthetic osteolysis

Wear-particle osteolysis affects prosthesis survival leading to implant loosening up to 70% of revisions. Therapeutic strategies are increasing, however alternative testing methods to experimentally evaluate such treatments are lacking. The aim of this study was to reproduce an in vitro osteolysis model recapitulating the events that, starting from the exposure of macrophages to polyethylene, lead to the establishment of osteoclastogenesis and inflammation. Responses to polyethylene, at 3 and 7 days, in a macrophage cell line, RAW 264.7, were determined by DNA quantification, immunofluorescence, pit assay, gene expression, cytokine production and NF-kB activation. Results showed that 3 days exposure to particles could induce a significant production of Tumor Necrosis Factor alpha (p < 0.0005) and Prostaglandin E₂ (p < 0.005) compared to controls. Particles also induced macrophages to spontaneously differentiate into mature and active osteoclasts, in terms of identification of multinucleated cells by Phalloidin staining and by the analysis of osteoclast-specific gene markers. In particular, at 3 days polyethylene induced a significant up-regulation of Nuclear Factor of Activated T-cells, cytoplasmic 1, Receptor Activator of Nuclear factor Kappa-B and Receptor Activator of Nuclear Factor Kappa-B Ligand genes (p < 0.0005) compared to controls. At protein level, the particles induced a significant increase of Receptor Activator of Nuclear Factor Kappa-B Ligand at day 7 over controls (p < 0.0005). Osteoclasts were capable to resorb bone even in absence of differentiating factors. The possible mechanism, beside spontaneous osteoclastogenesis mediated by wear debris, was identified in an autocrine up-regulation of Receptor activator of nuclear factor kappa-B ligand gene expression and protein synthesis. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 510-520, 2017.

Prolonged Release of Bioactive Model Proteins from Anionic Microgels Fabricated with a New Microemulsion Approach

PURPOSE

Therapeutic proteins have become an integral part of health care. However, their controlled delivery remains a challenge. Protein function depends on a delicate three dimensional structure, which can be damaged during the fabrication of controlled release systems. This study presents a microgel-based controlled release system capable of high loading efficiencies, prolonged release and retention of protein function.

METHODS

A new DMSO/Pluronic microemulsion served as a reaction template for the crosslinking of poly(acrylic acid) and oligo (ethylene glycol) to form microgels. Poly(acylic acid) molecular weights and microgel crosslinking densities were altered to make a series of microgels. Microgel capacity to capture and retain proteins of different sizes and isoelectric points, to control their release rate (over ~30 days) and to maintain the biofunctionality of the released proteins were evaluated.

RESULTS

Microgels of different sizes and morphologies were synthesized. Loading efficiencies of 100% were achieved with lysozyme in all formulations. The loading efficiency of all other proteins was formulation dependent. Release of lysozyme was achieved for up to 30 days and the released lysozyme retained over 90% of its activity.

CONCLUSIONS

High loading efficiencies and prolonged release of different proteins was achieved. Furthermore, lysozyme's functionality remained uncompromised after encapsulation and release. This work begins to lay the foundation for a broad platform for the delivery of therapeutic proteins.

Reduction of inflammatory responses and enhancement of extracellular matrix formation by vanillin-incorporated poly(lactic-co-glycolic acid) scaffolds

Vanillin is one of the major components of vanilla, a commonly used flavoring agent and preservative and is known to exert potent antioxidant and anti-inflammatory activities. In this work, vanillin-incorporated poly(lactic-co-glycolic acid) (PLGA) films and scaffolds were fabricated to evaluate the effects of vanillin on the inflammatory responses and extracellular matrix (ECM) formation in vitro and in vivo. The incorporation of vanillin to PLGA films induced hydrophilic nature, resulting in the higher cell attachment and proliferation than the pure PLGA film. Vanillin also reduced the generation of reactive oxygen species (ROS) in cells cultured on the pure PLGA film and significantly inhibited the PLGA-induced inflammatory responses in vivo, evidenced by the reduced accumulation of inflammatory cells and thinner fibrous capsules. The effects of vanillin on the ECM formation were evaluated using annulus fibrous (AF) cell-seeded porous PLGA/vanillin scaffolds. PLGA/vanillin scaffolds elicited the more production of glycosaminoglycan and collagen than the pure PLGA scaffold, in a concentration-dependent manner. Based on the low level of inflammatory responses and enhanced ECM formation, vanillin-incorporated PLGA constructs make them promising candidates in the future biomedical applications.

Nanofibrous poly(lactide-co-glycolide) membranes loaded with diamond nanoparticles as promising substrates for bone tissue engineering

BACKGROUND

Nanofibrous scaffolds loaded with bioactive nanoparticles are promising materials for bone tissue engineering.

METHODS

In this study, composite nanofibrous membranes containing a copolymer of L-lactide and glycolide (PLGA) and diamond nanoparticles were fabricated by an electrospinning technique. PLGA was dissolved in a mixture of methylene chloride and dimethyl formamide (2:3) at a concentration of 2.3 wt%, and nanodiamond (ND) powder was added at a concentration of 0.7 wt% (about 23 wt% in dry PLGA).

RESULTS

In the composite scaffolds, the ND particles were either arranged like beads in the central part of the fibers or formed clusters protruding from the fibers. In the PLGA-ND membranes, the fibers were thicker (diameter 270 ± 9 nm) than in pure PLGA meshes (diameter 218 ± 4 nm), but the areas of pores among these fibers were smaller than in pure PLGA samples (0.46 ± 0.02 μm(2) versus 1.28 ± 0.09 μm(2) in pure PLGA samples). The PLGA-ND membranes showed higher mechanical resistance, as demonstrated by rupture tests of load and deflection of rupture probe at failure. Both types of membranes enabled the attachment, spreading, and subsequent proliferation of human osteoblast-like MG-63 cells to a similar extent, although these values were usually lower than on polystyrene dishes. Nevertheless, the cells on both types of membranes were polygonal or spindle-like in shape, and were distributed homogeneously on the samples. From days 1-7 after seeding, their number rose continuously, and at the end of the experiment, these cells were able to create a confluent layer. At the same time, the cell viability, evaluated by a LIVE/DEAD viability/cytotoxicity kit, ranged from 92% to 97% on both types of membranes. In addition, on PLGA-ND membranes, the cells formed well developed talin-containing focal adhesion plaques. As estimated by the determination of tumor necrosis factor-alpha levels in the culture medium and concentration of intercellular adhesion molecule-1, MG-63 cells, and RAW 264.7 macrophages on these membranes did not show considerable inflammatory activity.

CONCLUSION

This study shows that nanofibrous PLGA membranes loaded with diamond nanoparticles have interesting potential for use in bone tissue engineering.

Physicobiological properties and biocompatibility of biodegradable poly(oxalate-co-oxamide)

The development of biodegradable and biocompatible materials is the basis for tissue engineering and drug delivery. The aims of this study are to develop the poly(oxalate-co-oxamide) (POXAM) and evaluate its physicochemical properties and biocompatibility as the initial step for the development of new biomaterials. POXAM had a molecular weight of ~70,000 Da and rapidly degraded under physiological condition with a half-hydrolysis of ~4 days. POXAM films exhibited relative hydrophilic nature because of the presence of oxamide linkages and induced a higher cell attachment and proliferation compared with poly(lactic-co-glycolic acid) (PLGA) films. In vitro inflammatory responses to POXAM were evaluated using murine macrophage RAW 264.7 cells. POXAM films minimally stimulated the cells to generate less production of tumor necrosis factor-alpha (TNF-α) than PLGA films. We assessed the in vivo inflammatory responses to POXAM films implanted in the dorsal skin of rats. Histological studies revealed that POXAM provoked remarkably reduced inflammatory responses, evidenced by the less accumulation of inflammatory cells and giant cells, thinner fibrotic capsules, in comparison with PLGA. Given its excellent biocompatibility, fast degradation, and very mild inflammatory responses, POXAM has great potential for biomedical applications, such as scaffolds, wound dressing, and fast drug delivery.

Antioxidant and anti-inflammatory activities of hydroxybenzyl alcohol releasing biodegradable polyoxalate nanoparticles

p-Hydroxybenzyl alcohol (HBA) is one of phenolic compounds in herbal agents and plays a pivotal role in protection against oxidative damage-related diseases due to anti-inflammatory effects. We have developed a new biodegradable and anti-inflammatory peroxalate copolymer in which HBA is chemically incorporated into its backbone. The HBA-incorporated copolyoxalate (HPOX) was synthesized from a condensation reaction of oxalyl chloride, 1,4-cyclohexamethanol and HBA and was capable of releasing pharmaceutically active HBA during hydrolytic degradation. HPOX could be dispersed into a single emulsion for the formulation of nanoparticles which had a mean size approximately 500 nm in diameter. The nanoparticles released HBA which was able to inhibit the production of nitric oxide (NO) by suppressing the expression of inducible nitric oxide synthase (iNOS) in lipopolysaccharide (LPS)-activated RAW 264.7 macrophage cells. HPOX nanoparticles also reduced the production of tumor necrosis factor-alpha (TNF-alpha). The remarkable features of HPOX are that the polymer degrades completely into small molecules and one of degradation products is a pharmaceutically active compound. We anticipate that HPOX is highly potent and versatile for the treatment of inflammatory diseases.