In vitro evaluation of the surface effects on magnesium-yttrium alloy degradation and mesenchymal stem cell adhesion

Engineering Triphasic Nanocomposite Coatings on Pretreated Mg Substrates for Biomedical Applications

Biodegradable polymer-based nanocomposite coatings provide multiple advantages to modulate the corrosion resistance and cytocompatibility of magnesium (Mg) alloys for biomedical applications. Biodegradable poly(glycerol sebacate) (PGS) is a promising candidate used for medical implant applications. In this study, we synthesized a new PGS nanocomposite system consisting of hydroxyapatite (HA) and magnesium oxide (MgO) nanoparticles and developed a spray coating process to produce the PGS nanocomposite layer on pretreated Mg substrates, which improved the coating adhesion at the interface and their cytocompatibility with bone marrow derived mesenchymal stem cells (BMSCs). Prior to the spray coating process of polymer-based nanocomposites, the Mg substrates were pretreated in alkaline solutions to enhance the interfacial adhesion strength of the polymer-based nanocomposite coatings. The addition of HA and MgO nanoparticles (nHA and nMgO) to the PGS matrix, as well as the alkaline pretreatment of the Mg substrates, significantly enhanced the interfacial adhesion strength when compared with the PGS coating on the nontreated Mg control. The average BMSC adhesion densities were higher on the PGS/nHA/nMgO coated Mg than the noncoated Mg controls under direct contact conditions. Moreover, the addition of nHA and nMgO to the PGS matrix and coating the nanocomposite onto Mg substrates increased the average BMSC adhesion density when compared with the PGS/nHA/nMgO coated titanium (Ti) and PGS coated Mg controls under direct contact. Therefore, the spray coating process of PGS/nHA/nMgO nanocomposites on Mg substrates or other biodegradable metal substrates could provide a promising surface treatment strategy for biodegradable implant applications.

Facile bioactive transformation of magnesium alloy surfaces for surgical implant applications

The market for orthopedic implant alloys has seen significant growth in recent years, and efforts to reduce the carbon footprint of medical treatment (i.e., green medicine) have prompted extensive research on biodegradable magnesium-based alloys. Magnesium alloys provide the mechanical strength and biocompatibility required of medical implants; however, they are highly prone to corrosion. In this study, Mg-9Li alloy was immersed in cell culture medium to simulate degradation in the human body, while monitoring the corresponding effects of the reaction products on cells. Variations in pH revealed the generation of hydroxyl groups, which led to cell death. At day-5 of the reaction, a coating of MgCO3 (H2O)3, HA, and α -TCP appeared on sample surfaces. The coating presented three-dimensional surface structures (at nanometer to submicron scales), anti-corrosion effects, and an altered surface micro-environment conducive to the adhesion of osteoblasts. This analysis based on bio-simulation immersion has important implications for the clinical use of Mg alloys to secure regenerated periodontal tissue.

The combined effect of zinc and calcium on the biodegradation of ultrahigh-purity magnesium implants

Magnesium (Mg)-based implants are promising candidates for orthopedic interventions, because of their biocompatibility, good mechanical features, and ability to degrade completely in the body, eliminating the need for an additional removal surgery. In the present study, we synthesized and investigated two Mg-based materials, ultrahigh-purity ZX00 (Mg-Zn-Ca; <0.5 wt% Zn and <0.5 wt% Ca, in wt%; Fe-content <1 ppm) and ultrahigh-purity Mg (XHP-Mg, >99.999 wt% Mg; Fe-content <1 ppm), in vitro and in vivo in juvenile healthy rats to clarify the effect of the alloying elements Zn and Ca on mechanical properties, microstructure, cytocompatibility and degradation rate. Potential differences in bone formation and bone in-growth were also assessed and compared with state-of-the-art non-degradable titanium (Ti)-implanted, sham-operated, and control (non-intervention) groups, using micro-computed tomography, histology and scanning electron microscopy. At 6 and 24 weeks after implantation, serum alkaline phosphatase (ALP), calcium (Ca), and Mg level were measured and bone marrow stromal cells (BMSCs) were isolated for real-time PCR analysis. Results show that ZX00 implants have smaller grain size and superior mechanical properties than XHP-Mg, and that both reveal good biocompatibility in cytocompatibilty tests. ZX00 homogenously degraded with an increased gas accumulation 12 and 24 weeks after implantation, whereas XHP-Mg exhibited higher gas accumulation already at 2 weeks. Serum ALP, Ca, and Mg levels were comparable among all groups and both Mg-based implants led to similar relative expression levels of Alp, Runx2, and Bmp-2 genes at weeks 6 and 24. Histologically, Mg-based implants are superior for new bone tissue formation and bone in-growth compared to Ti implants. Furthermore, by tracking the sequence of multicolor fluorochrome labels, we observed higher mineral apposition rate at week 2 in both Mg-based implants compared to the control groups. Our findings suggest that (i) ZX00 and XHP-Mg support bone formation and remodeling, (ii) both Mg-based implants are superior to Ti implants in terms of new bone tissue formation and osseointegration, and (iii) ZX00 is more favorable due to its lower degradation rate and moderate gas accumulation.

A review on magnesium alloys for biomedical applications

Magnesium (Mg) and Mg alloys are considered as potential candidates for biomedical applications because of their high specific strength, low density, and elastic modulus, degradability, good biocompatibility and biomechanical compatibility. However, the rapid corrosion rate of Mg alloys results in premature loss of mechanical integrity, limiting their clinical application in load-bearing parts. Besides, the low strength of Mg alloys restricts their further application. Thus, it is essential to understand the characteristics and influencing factors of mechanical and corrosion behavior, as well as the methods to improve the mechanical performances and corrosion resistance of Mg alloys. This paper reviews the recent progress in elucidating the corrosion mechanism, optimizing the composition, and microstructure, enhancing the mechanical performances, and controlling the degradation rate of Mg alloys. In particular, the research progress of surface modification technology of Mg alloys is emphasized. Finally, the development direction of biomedical Mg alloys in the future is prospected.

Corrosion Behavior in Magnesium-Based Alloys for Biomedical Applications

Magnesium alloys exhibit superior biocompatibility and biodegradability, which makes them an excellent candidate for artificial implants. However, these materials also suffer from lower corrosion resistance, which limits their clinical applicability. The corrosion mechanism of Mg alloys is complicated since the spontaneous occurrence is determined by means of loss of aspects, e.g., the basic feature of materials and various corrosive environments. As such, this study provides a review of the general degradation/precipitation process multifactorial corrosion behavior and proposes a reasonable method for modeling and preventing corrosion in metals. In addition, the composition design, the structural treatment, and the surface processing technique are involved as potential methods to control the degradation rate and improve the biological properties of Mg alloys. This systematic representation of corrosive mechanisms and the comprehensive discussion of various technologies for applications could lead to improved designs for Mg-based biomedical devices in the future.

Insights into the Role of Magnesium Ions in Affecting Osteogenic Differentiation of Mesenchymal Stem Cells

Bone marrow mesenchymal stem cells (MSCs) are multipotent stem cells with the ability to differentiate into bone-producing cells, which is essential for bone formation. Magnesium biomedical materials, such as biodegradable matters with osteoinductive properties, play a vital role in the osteogenic differentiation of MSCs. International and Chinese studies have shown that magnesium ions, which are produced by biodegradation, mainly achieve this effect by regulating the expression of genes and proteins associated with osteogenesis, activating multiple signal pathways, elevating autophagic activities, and adjusting the pH in the microenvironment. It is of great significance to study the regulatory mechanisms and identify the optimal conditions that how magnesium ions promote osteogenic differentiation of MSCs. In this study, we summarized the regulatory mechanisms noted above.

Degradation behaviors and cytocompatibility of Mg/β-tricalcium phosphate composites produced by spark plasma sintering

Magnesium (Mg)-based materials have shown great potentials for bioresorbable implant applications. Previous studies showed that Mg with 10 and 20 vol % β-tricalcium phosphate (β-TCP) composites produced by spark plasma sintering, improved mechanical properties when compared with pure Mg. The objectives of this study were to evaluate the degradation behaviors of Mg/10% β-TCP and Mg/20% β-TCP composites in revised stimulated body fluid (rSBF), and to determine their cytocompatibility with bone marrow derived mesenchymal stem cells (BMSCs) using the direct culture method. During the 11 days of immersion in rSBF, Mg/β-TCP composites showed different degradation behaviors at different immersion periods, that is, the initial stage (0-1 hr), the mid-term stage (1 hr to 2 days), and the long-term stage (2-11 days). The counter effects of mass loss due to microgalvanic corrosion and mass gain due to deposition of Ca-P containing layers resulted in slower Mg²⁺ ion release for Mg/20% β-TCP than Mg/10% β-TCP in the mid-term, but eventually 16% mass loss for Mg/20% β-TCP and 10% mass loss for Mg/10% β-TCP after 11 days of immersion. The in vitro studies with BMSCs showed the highest cell adhesion density (i.e., 68% of seeding density) on the plate surrounding the Mg/10% β-TCP sample, that is, under the indirect contact condition of direct culture. The β-TCP showed a positive effect on direct adhesion of BMSCs on the surface of Mg/β-TCP composites. This study elucidated the degradation behaviors and the cytocompatibility of Mg/β-TCP composites in vitro; and, further studies on Mg/ceramic composites are needed to determine their potential for clinical applications. © 2019 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater 107B: 2238-2253, 2019.

The Effect of Surface Treatments on the Degradation of Biomedical Mg Alloys-A Review Paper

This report reviews the effects of chemical, physical, and mechanical surface treatments on the degradation behavior of Mg alloys via their influence on the roughness and surface morphology. Many studies have been focused on technically-used AZ alloys and a few investigations regarding the surface treatment of biodegradable and Al-free Mg alloys, especially under physiological conditions. These treatments tailor the surface roughness, homogenize the morphology, and decrease the degradation rate of the alloys. Conversely, there have also been reports which showed that rough surfaces lead to less pitting and good cell adherence. Besides roughness, there are many other parameters which are much more important than roughness when regarding the degradation behavior of an alloy. These studies, which indicate the relationship between surface treatments, roughness and degradation, require further elaboration, particularly for biomedical Mg alloy applications.

Special Biodegradable Fixation Device for Anterior Cruciate Ligament Reconstruction-Safety and Efficacy in a Beagle Model

This study aimed to evaluate the safety and efficacy of the special WE43 magnesium alloy stretch plates (SPs) used as fixation device for anterior cruciate ligament (ACL) reconstruction in a beagle model. Eleven beagle dogs underwent ACL reconstruction using WE43 SPs to fix the ligament grafts with the femoral ends, whereas titanium interferences were employed in the tibia ends. Load-to-failure tests were conducted to evaluate the mechanical properties. A comprehensive set of histological observations was performed to observe the local tissue response and assess the status of the attachment between the bone tissue and ligament grafts. Microcomputed tomography and scanning electron microscopy in conjunction with energy spectrum analysis were conducted to evaluate the degradation rate in vivo and investigate the morphology of the cross-section of the SPs and the element distribution in vivo. Immersion tests were employed to investigate the corrosion properties in vitro. The special WE43 SPs showed not only good mechanical strength but also a suitable degradation rate in vivo. The results indicated the special WE43 SP could be considered as a novel fixation device for ACL reconstruction.

In vitro and in vivo evaluation of novel biodegradable Mg-Ag-Y alloys for use as resorbable bone fixation implant

Magnesium (Mg) alloy is gaining more interest because of its degradability and osteogenic potential. Still, it has some deficiencies, such as its rapid degradation rate, insufficient mechanical property. This research aimed to design a novel biodegradable Mg-argentum (Ag)-yttrium (Y) alloy, and Y was added to improve degradable and mechanical property. Mg-Ag-Y alloys were characterized for mechanical features, practicabilities in vitro and in vivo. The mechanical features results shown that this novel component was similar to native bone tissue in elastic moduli, tensile, and compressive stress. Then mesenchymal stem cells (MSCs) were seeded in alloys to assess cell toxicity in vitro. The results showed that its aqueous extract was suitable for MSCs adhesion and proliferation. Then the alloy was evaluated for biomedical applications in nonfractured distal femora of Sprague Dawley rats for 6 weeks, compared with those of pure-Mg and stainless steel groups. All rats survived, and hematological and histological evaluation showed no abnormal physiology 6 weeks postimplantation, and measurements of serum Mg²⁺ concentration were within normal levels. X-ray scanning, microcomputed tomography, and histological examinations were performed to evaluate the degradability and osteogenic potential. The results indicated that the degradation rate of alloy was 0.91 mm per year, (range 0.77-1.22 mm), and pure-Mg 1.80 mm per year (1.43-2.26 mm). The new bone quantity was 3.18 mm³ (1.46-4.44 mm³ ) in Mg-Ag-Y alloys group, 1.39 mm³ (0.54-2.32 mm³ ) in pure-Mg group, and none in stainless steel group. These promising results suggest potential clinical application of Mg-Ag-Y alloys for use as resorbable bone fixation implant. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 2059-2069, 2018.

Magnesium degradation under physiological conditions - Best practice

This review focusses on the application of physiological conditions for the mechanistic understanding of magnesium degradation. Despite the undisputed relevance of simplified laboratory setups for alloy screening purposes, realistic and predictive in vitro setups are needed. Due to the complexity of these systems, the review gives an overview about technical measures, defines some caveats and can be used as a guideline for the establishment of harmonized laboratory approaches.

•

Physiological conditions are mandatory for mechanistic understanding of magnesium degradation.

•

Guidelines and caveats for experimental setups are reviewed.

•

Media composition is essential for reliable experiments.

Degradation of Bioresorbable Mg-4Zn-1Sr Intramedullary Pins and Associated Biological Responses in Vitro and in Vivo

This article reports the degradation and biological properties of as-drawn Mg-4Zn-1Sr (designated as ZSr41) and pure Mg (P-Mg) wires as bioresorbable intramedullary pins for bone repair. Specifically, their cytocompatibility with bone marrow derived mesenchymal stem cells (BMSCs) and degradation in vitro, and their biological effects on peri-implant tissues and in vivo degradation in rat tibiae were studied. The as-drawn ZSr41 pins showed a significantly faster degradation than P-Mg in vitro and in vivo. The in vivo average daily degradation rates of both ZSr41 and P-Mg intramedullary pins were significantly greater than their respective in vitro degradation rates, likely because the intramedullary site of implantation is highly vascularized for removal of degradation products. Importantly, the concentrations of Mg2+, Zn2+, and Sr2+ ions in the BMSC culture in vitro and their concentrations in rat blood in vivo were all lower than their respective therapeutic dosages, i.e., in a safe range. Despite of rapid degradation with a complete resorption time of 8 weeks in vivo, the ZSr41 intramedullary pins showed a significant net bone growth because of stimulatory effects of the metallic ions released. However, proportionally released OH- ions and hydrogen gas caused adverse effects on bone marrow cells and resulted in cavities in surrounding bone. Thus, properly engineering the degradation properties of Mg-based implants is critical for harvesting the bioactivities of beneficial metallic ions, while controlling adverse reactions associated with the release of OH- ions and hydrogen gas. It is necessary to further optimize the alloy processing conditions and/or modify the surfaces, for example, applying coatings onto the surface, to reduce the degradation rate of ZSr41 wires for skeletal implant applications.

Production and characterization of highly porous biodegradable Mg alloy scaffolds containing Ca, Zn and Co

In this study, highly porous Mg-Ca-Zn-Co alloy scaffolds for tissue engineering applications were prepared by powder metallurgy based space holder method. Mg-Ca-Zn-Co alloy foam can be used as a scaffold material for hard tissue generation. Mechanical properties of the porous specimens are close to cancellous bone. Increasing Zn content in the alloy decreased the Mg grain size and enhanced the mechanical properties. Increasing Zn content of the alloy from 1.0 to 8.0 wt.% increased the Young's modulus from 12 GPa to 23 GPa. Ca addition prevented the oxidation of the specimens during sintering. Electrochemical corrosion behaviour of the specimens was examined in the simulated body fluid. Corrosion rate was decreased with Zn addition up to 3.0 wt.% and then increased. Increasing Co content increased the corrosion rate. Weight loss/gain and Mg ion release values were increased with increasing immersion time. Weight loss of the specimen was initially decreased with Zn addition up to about 3% and then increased.

The Effects of Serum Proteins on Magnesium Alloy Degradation in Vitro

Magnesium (Mg) alloys are promising materials for biodegradable implants, but their clinical translation requires improved control over their degradation rates. Proteins may be a major contributing factor to Mg alloy degradation, but are not yet fully understood. This article reports the effects of fetal bovine serum (FBS), a physiologically relevant mixture of proteins, on Mg and Mg alloy degradation. FBS had little impact on mass loss of pure Mg during immersion degradation, regardless of whether or not a native oxide layer was present on the sample surface. FBS reduced the mass loss of Mg-Yttrium (MgY) alloy with an oxidized surface during immersion degradation, but increased the mass loss for the same alloy with a metallic surface (surface oxides were removed). FBS also influenced the mode of degradation by limiting the depth of pit formation during degradation processes on commercially pure Mg with metallic or oxidized surfaces and on MgY alloy with oxidized surfaces. The results demonstrated that serum proteins had significant interactions with Mg-based biodegradable metals, and these interactions may be modified by alloy composition and processing. Therefore, proteins should be taken into account when designing experiments to assess degradation of Mg-based implants.

Anodization of magnesium for biomedical applications - Processing, characterization, degradation and cytocompatibility

This article reports anodization of Mg in KOH electrolyte and the associated surface, degradation, and biological properties for bioresorbable implant applications. The preparation procedures for electrodes and anodization setup significantly enhanced reproducibility of samples. The results of anodization performed at the applied potentials of 1.8, 1.9, or 2.0V showed that the sample anodized at 1.9V and annealed, referred to as the 1.9 AA sample, had homogenous surface microstructure and elemental composition, and a reduction in corrosion current density in the electrochemical testing. In comparison with Mg control, the 1.9 AA sample showed a distinct mode of degradation, e.g., continuous growth of a passivation layer enriched with Ca and P instead of typical localized pitting and undermining, and a greater release rate of Mg²⁺ ions when immersed in physiologically relevant media. In the direct culture with bone marrow derived mesenchymal stem cells (BMSCs) in vitro, the 1.9 AA sample did not affect BMSC adhesion and morphology under indirect contact; however, the 1.9 AA sample showed a reduction in cell spreading under direct contact. The change in surface topography/composition at the dynamic interface of the anodized-annealed Mg sample might have contributed to the change in BMSC morphology. In summary, this study demonstrated the potential of anodic oxidation to modulate the degradation behaviors of Mg-based biomaterials and BMSC responses in vitro, and confirmed the value of direct culture method for studying cytocompatibility of Mg-based biomaterials for medical implant applications.

STATEMENT OF SIGNIFICANCE

Magnesium (Mg)-based biomaterials have been specifically designed and actively explored for biodegradable implant applications since the early 2000s. To realize the benefits of Mg-based materials for medical implant applications, it is critical to control the rate of Mg degradation (i.e. corrosion) in the body. We investigated an environmentally friendly anodization process using KOH electrolyte for modifying the surface of Mg-based materials, and the resulted surface, degradation, and biological properties for biomedical applications. This study reported critical considerations that are important for repeatability of anodization process, homogeneity of surface microstructure and composition, and in vitro evaluations of the degradation and biological properties of surface treated Mg samples. The details in preparation of electrodes, anodization setup, annealing, and sample handling before and after surface treatment (e.g. re-embedding) reported in this article are valuable for studying a variety of electrochemical processes for surface treatment of Mg-based metals, because of enhanced reproducibility.

A Comparison Study on the Degradation and Cytocompatibility of Mg-4Zn-xSr Alloys in Direct Culture

This article reports the behaviors of bone-marrow-derived mesenchymal stem cells (BMSCs) in the direct culture with four Mg-4Zn-xSr alloys (x = 0.15, 0.5, 1.0, 1.5 wt %), designated as ZSr41A, B, C, and D, respectively; and a systematic comparison on the degradation of the ZSr41 alloys and their biological impact in the direct culture with different cell types in their respective media. The direct culture method, in which cells are seeded directly onto the surface of the sample, was used to investigate cellular responses at the cell-biomaterial interface in vitro. The results showed that BMSCs adhered and remained viable on the surfaces of all ZSr41 alloys, but the faster degrading ZSr41A and ZSr41B alloys showed a significantly lower amount of viable BMSCs adhered to their surfaces. Moreover, BMSCs adhered to the culture plate surrounding the samples were unaffected by the solubilized degradation products from the ZSr41 alloys. The results from the comparison study showed that the in vitro degradation rates of Mg-based biomaterials in different culture systems might be mostly affected by media buffer capacity (i.e., HCO₃^- concentration), and to a lesser extent, d-glucose concentration. The comparison study also indicated that BMSCs were more robust than H9 human embryonic stem cells and human umbilical vein endothelial cells for screening the cytocompatibility of Mg-based biomaterials. In general, the adhesion and viability of BMSCs at the cell-material interface were inversely proportional to the alloy degradation rates. This study presented a clinically relevant in vitro culture system for screening bioresorbable alloys in direct culture, and provided valuable guidelines for determining the degradation rates of Mg-based biomaterials.

Cytocompatibility and early inflammatory response of human endothelial cells in direct culture with Mg-Zn-Sr alloys

Crystalline Mg-Zinc (Zn)-Strontium (Sr) ternary alloys consist of elements naturally present in the human body and provide attractive mechanical and biodegradable properties for a variety of biomedical applications. The first objective of this study was to investigate the degradation and cytocompatibility of four Mg-4Zn-xSr alloys (x=0.15, 0.5, 1.0, 1.5wt%; designated as ZSr41A, B, C, and D respectively) in the direct culture with human umbilical vein endothelial cells (HUVEC) in vitro. The second objective was to investigate, for the first time, the early-stage inflammatory response in cultured HUVECs as indicated by the induction of vascular cellular adhesion molecule-1 (VCAM-1). The results showed that the 24-h in vitro degradation of the ZSr41 alloys containing a β-phase with a Zn/Sr at% ratio ∼1.5 was significantly faster than the ZSr41 alloys with Zn/Sr at% ∼1. Additionally, the adhesion density of HUVECs in the direct culture but not in direct contact with the ZSr41 alloys for up to 24h was not adversely affected by the degradation of the alloys. Importantly, neither culture media supplemented with up to 27.6mM Mg2+ ions nor media intentionally adjusted up to alkaline pH 9 induced any detectable adverse effects on HUVEC responses. In contrast, the significantly higher, yet non-cytotoxic, Zn2+ ion concentration from the degradation of ZSr41D alloy was likely the cause for the initially higher VCAM-1 expression on cultured HUVECs. Lastly, analysis of the HUVEC-ZSr41 interface showed near-complete absence of cell adhesion directly on the sample surface, most likely caused by either a high local alkalinity, change in surface topography, and/or surface composition. The direct culture method used in this study was proposed as a valuable tool for studying the design aspects of Zn-containing Mg-based biomaterials in vitro, in order to engineer solutions to address current shortcomings of Mg alloys for vascular device applications.

STATEMENT OF SIGNIFICANCE

Magnesium (Mg) alloys specifically designed for biodegradable implant applications have been the focus of biomedical research since the early 2000s. Physicochemical properties of Mg alloys make these metallic biomaterials excellent candidates for temporary biodegradable implants in orthopedic and cardiovascular applications. As Mg alloys continue to be investigated for biomedical applications, it is necessary to understand whether Mg-based materials or the alloying elements have the intrinsic ability to direct an immune response to improve implant integration while avoiding cell-biomaterial interactions leading to chronic inflammation and/or foreign body reactions. The present study utilized the direct culture method to investigate for the first time the in vitro transient inflammatory activation of endothelial cells induced by the degradation products of Zn-containing Mg alloys.

Adhesion of mesenchymal stem cells to biomimetic polymers: A review

The mesenchymal stem cells (MSCs) are promising candidates for cell therapy due to the self-renewal, multi-potency, ethically approved state and suitability for autologous transplantation. However, key issue for isolation and manipulation of MSCs is adhesion in ex-vivo culture systems. Biomaterials engineered for mimicking natural extracellular matrix (ECM) conditions which support stem cell adhesion, proliferation and differentiation represent a main area of research in tissue engineering. Some of them successfully enhanced cells adhesion and proliferation because of their biocompatibility, biomimetic texture, and chemistry. However, it is still in its infancy, therefore intensification and optimization of in vitro, in vivo, and preclinical studies is needed to clarify efficacies as well as applicability of those bioengineered constructs. The aim of this review is to discuss mechanisms related to the in-vitro adhesion of MSCs, surfaces biochemical, biophysical, and other factors (of cell's natural and artificial micro-environment) which could affect it and a review of previous research attempting for its bio-chemo-optimization.

Cytocompatibility of magnesium and AZ31 alloy with three types of cell lines using a direct in vitro method

Magnesium alloys have been investigated by many researchers as a new absorbable biomaterial owing to their excellent degradability with non-maleficence or low-maleficence in living tissues. In the present work, the in vitro cytocompatibility of an Magnesium alloy was investigated by culturing cells directly on it. Investigations were carried out in terms of the cell viability along with the use of scanning electron microscopy to observe its morphology. The cell lines used were derived from fibroblast, endothelial, and smooth muscle cells. Pure magnesium and AZ31 alloy composed of magnesium (96 %), aluminum (3 %), and zinc (1 %) were adopted as models. The viability of cells on the metal samples and on the margin area of a multi-well plate was investigated. For direct culturing on metal, a depression in the viability and morphologically stressed cells were observed. In addition, the cell viability was also depressed for the margin area. To clarify the factors causing the negative effects, the amount of eluted metal ions and pH changes in the medium because of the erosion of the Magnesium samples were investigated, together with the cytotoxicity of sole metal ions corresponding to the composition of the metals. It was found that Mg(2+), Zn(2+), and Al(3+) ions were less toxic at the investigated concentrations, and that these factors will not produce negative effects on cells. Consequently, these factors cannot fully explain the results.

Mechanical properties, in vitro corrosion and biocompatibility of newly developed biodegradable Mg-Zr-Sr-Ho alloys for biomedical applications

Our previous studies have demonstrated that Mg-Zr-Sr alloys can be anticipated as excellent biodegradable implant materials for load-bearing applications. In general, rare earth elements (REEs) are widely used in magnesium (Mg) alloys with the aim of enhancing the mechanical properties of Mg-based alloys. In this study, the REE holmium (Ho) was added to an Mg-1Zr-2Sr alloy at different concentrations of Mg1Zr2SrxHo alloys (x = 0, 1, 3, 5 wt. %) and the microstructure, mechanical properties, degradation behaviour and biocompatibility of the alloys were systematically investigated. The results indicate that the addition of Ho to Mg1Zr2Sr led to the formation of the intermetallic phases MgHo3, Mg2Ho and Mg17Sr2 which resulted in enhanced mechanical strength and decreased degradation rates of the Mg-Zr-Sr-Ho alloys. Furthermore, Ho addition (≤5 wt. %) to Mg-Zr-Sr alloys led to enhancement of cell adhesion and proliferation of osteoblast cells on the Mg-Zr-Sr-Ho alloys. The in vitro biodegradation and the biocompatibility of the Mg-Zr-Sr-Ho alloys were both influenced by the Ho concentration in the Mg alloys; Mg1Zr2Sr3Ho exhibited lower degradation rates than Mg1Zr2Sr and displayed the best biocompatibility compared with the other alloys.

Cytocompatibility of Magnesium Alloys with Human Urothelial Cells: A Comparison of Three Culture Methodologies

Magnesium (Mg) is a biodegradable metallic material, which has shown great potential for medical device applications. In this study, human urothelial cells (HUCs) were cultured in vitro with Mg-based substrates to investigate their cytocompatibility for potential urological device applications. Three different in vitro culture methodologies were explored to mimic different in vivo conditions, in an attempt to establish standard methods of evaluating cytocompatibility of Mg-based biomaterials for urological device applications. Direct culture is a suitable in vitro method when it is important to evaluate direct cell attachment on the biomaterial surfaces. Direct exposure culture is a desirable in vitro method for investigating the response of well-established cells in the body with newly implanted biomaterials. The exposure culture method is appropriate for evaluating cell-biomaterial interactions in the same environment, where they are not in direct contact with each other. The results showed differences in HUC behaviors with the same Mg-based substrates when different culture methods were used. The Mg-based substrates inhibited the HUC viability with direct contact at the cell-material interface in direct culture and direct exposure culture. The faster degrading Mg alloys containing yttrium reduced HUC density in direct culture, direct exposure culture, and exposure culture. The major soluble degradation products of Mg-based materials reduced HUC density significantly when the pH increased to 8.6 and above or the Mg²⁺ ion concentration reached 10 mM and above. Mg-based biomaterials, especially the slower degrading alloys such as AZ31, should be further studied to determine their potential to be used for bioresorbable urological devices.

A preliminary study for novel use of two Mg alloys (WE43 and Mg3Gd)

In this study, two types of magnesium alloys (WE43 and Mg3Gd) were compared with Heal-All membrane (a biodegradable membrane used in guided bone regeneration) in vitro to determine whether the alloys could be used as biodegradable membranes. Degradation behavior was assessed using immersion testing with simulated body fluid (SBF). Microstructural characteristics before and after immersion were evaluated through scanning electron microscopy, and degradation products were analyzed with energy dispersive spectrometry (EDS). To evaluate the biocompatibility of the three types of materials, we performed cytotoxicity, adhesion, and mineralization tests using human osteoblast-like MG63 cells. Immersion testing results showed no significant difference in degradation rate between WE43 and Mg3Gd alloys. However, both Mg alloys corroded faster than the Heal-All membrane, with pitting corrosion as the main corrosion mode for the alloys. Degradation products mainly included P- and Ca-containing apatites on the surface of WE43 and Mg3Gd, whereas these apatites were rarely detected on the surface of the Heal-All membrane. All three type of materials exhibited good biocompatibility. In the mineralization experiment, the alkaline phosphatase (ALP) activity of 10 % Mg3Gd extract was significantly higher than the extracts of the two other materials and the negative control. This study highlighted the potential of these Mg-REE alloys for uses in bone regeneration and further studies and refinements are obviously required.

Degradation testing of Mg alloys in Dulbecco's modified eagle medium: Influence of medium sterilization

This work studies the in vitro degradation of Mg alloys for bioabsorbable implant applications under near physiological conditions. For this purpose, the degradation behaviour of Mg alloys in Dulbecco's modified eagle medium (DMEM) which is a commonly used cell culture medium is analysed. Unfortunately, DMEM can be contaminated by microorganisms, acidifying the medium and accelerating the Mg degradation process by dissolution of protective degradation layers, such as (Mgx,Cay)(PO4)z. In this paper the influence of sterilization by applying UV-C radiation and antibiotics (penicillin/streptomycin) is analysed with two implant material candidates: Mg-Gd and Mg-Ag alloys; and pure magnesium as well as Mg-4Y-3RE as a reference.

Comparison of Selective Laser Melted Titanium and Magnesium Implants Coated with PCL

Degradable implant material for bone remodeling that corresponds to the physiological stability of bone has still not been developed. Promising degradable materials with good mechanical properties are magnesium and magnesium alloys. However, excessive gas production due to corrosion can lower the biocompatibility. In the present study we used the polymer coating polycaprolactone (PCL), intended to lower the corrosion rate of magnesium. Additionally, improvement of implant geometry can increase bone remodeling. Porous structures are known to support vessel ingrowth and thus increase osseointegration. With the selective laser melting (SLM) process, defined open porous structures can be created. Recently, highly reactive magnesium has also been processed by SLM. We performed studies with a flat magnesium layer and with porous magnesium implants coated with polymers. The SLM produced magnesium was compared with the titanium alloy TiAl6V4, as titanium is already established for the SLM-process. For testing the biocompatibility, we used primary murine osteoblasts. Results showed a reduced corrosion rate and good biocompatibility of the SLM produced magnesium with PCL coating.

Nanostructured calcium phosphate coatings on magnesium alloys: characterization and cytocompatibility with mesenchymal stem cells

This article reports the deposition and characterization of nanostructured calcium phosphate (nCaP) on magnesium-yttrium alloy substrates and their cytocompatibility with bone marrow derived mesenchymal stem cells (BMSCs). The nCaP coatings were deposited on magnesium and magnesium-yttrium alloy substrates using proprietary transonic particle acceleration process for the dual purposes of modulating substrate degradation and BMSC adhesion. Surface morphology and feature size were analyzed using scanning electron microscopy and quantitative image analysis tools. Surface elemental compositions and phases were analyzed using energy dispersive X-ray spectroscopy and X-ray diffraction, respectively. The deposited nCaP coatings showed a homogeneous particulate surface with the dominant feature size of 200-500 nm in the long axis and 100-300 nm in the short axis, and a Ca/P atomic ratio of 1.5-1.6. Hydroxyapatite was the major phase identified in the nCaP coatings. The modulatory effects of nCaP coatings on the sample degradation and BMSC behaviors were dependent on the substrate composition and surface conditions. The direct culture of BMSCs in vitro indicated that multiple factors, including surface composition and topography, and the degradation-induced changes in media composition, influenced cell adhesion directly on the sample surface, and indirect adhesion surrounding the sample in the same culture. The alkaline pH, the indicator of Mg degradation, played a role in BMSC adhesion and morphology, but not the sole factor. Additional studies are necessary to elucidate BMSC responses to each contributing factor.

Investigation of magnesium-zinc-calcium alloys and bone marrow derived mesenchymal stem cell response in direct culture

Crystalline Mg-Zn-Ca ternary alloys have recently attracted significant interest for biomedical implant applications due to their promising biocompatibility, bioactivity, biodegradability and mechanical properties. The objective of this study was to characterize as-cast Mg-xZn-0.5Ca (x=0.5, 1.0, 2.0, 4.0wt.%) alloys, and determine the adhesion and morphology of bone marrow derived mesenchymal stem cells (BMSCs) at the interface with the Mg-xZn-0.5Ca alloys. The direct culture method (i.e. seeding cells directly onto the surface of the sample) was established in this study to probe the highly dynamic cell-substrate interface and thus to elucidate the mechanisms of BMSC responses to dynamic alloy degradation. The results showed that the BMSC adhesion density on these alloys was similar to the cell-only positive control and the BMSC morphology appeared more anisotropic on the rapidly degrading alloy surfaces in comparison with the cell-only positive control. Importantly, neither culture media supplemented with up to 27.6mM Mg(2+) ions nor media intentionally adjusted up to alkaline pH 9 induced any detectable adverse effects on BMSC responses. We speculated that degradation-induced dynamic surface topography played an important role in modulating cell morphology at the interface. This study presents a clinically relevant in vitro model for screening bioresorbable alloys, and provides useful design guidelines for determining the degradation rate of implants made of Mg-Zn-Ca alloys.

Testing the in vitro performance of hydroxyapatite coated magnesium (AZ91D) and titanium concerning cell adhesion and osteogenic differentiation

In the current study the in vitro outcome of a degradable magnesium alloy (AZ91D) and standard titanium modified by nanostructured-hydroxyapatite (n-HA) coatings concerning cell adhesion and osteogenic differentiation was investigated by direct cell culture. The n-HA modification was prepared via radio-frequency magnetron sputtering deposition and proven by field emission scanning electron microscopy and X-ray powder diffraction patterns revealing a homogenous surface coating. Human mesenchymal stem cell (hMSCs) adhesion was examined after one and 14 days displaying an enhanced initial cell adhesion on the n-HA modified samples. The osteogenic lineage commitment of the cells was determined by alkaline phosphatase (ALP) quantification. On day one n-HA coated AZ91D exhibited a comparable ALP expression to standard tissue culture polystyrene samples. However, after 14 days solely little DNA and ALP amounts were measurable on n-HA coated AZ91D due to the lack of adherent cells. Titanium displayed excellent cell adhesion properties and ALP was detectable after 14 days. An increased pH of the culture was measured for AZ91D as well as for n-HA coated AZ91D. We conclude that n-HA modification improves initial cell attachment on AZ91D within the first 24 h. However, the effect does not persist for 14 days in in vitro conditions.

Preclinical evaluation of the thrombogenicity and endothelialization of bare metal and surface-coated neurovascular stents

BACKGROUND AND PURPOSE

Stent-assisted coiling is routinely used for the endovascular treatment of complex or wide-neck intracranial aneurysms. However, in-stent thrombosis, thromboembolic events, and ischemic complications remain a major concern associated with stent implants. Therefore, a novel low-profile neurovascular stent with a bare metal surface was investigated with regard to thrombogenicity and endothelialization and compared with the same stent coated with albumin or heparin.

MATERIALS AND METHODS

The bare metal and heparin- or albumin-coated stents were loaded in heparin-coated tubing, which was then filled with heparinized human blood (n = 5) and circulated at 150 mL/min and 37°C for 60 minutes. Before and after circulation, measurement of various inflammation and coagulation markers and scanning electron microscopy were performed. Endothelialization of the stents was investigated in an in vitro model including human umbilical vascular endothelial cells.

RESULTS

Our results showed that platelet loss and platelet activation and activation of the coagulation cascade, which are induced by the bare metal stents, were significantly reduced by heparin or albumin coating. Adverse effects on erythrocytes, leukocytes, and the complement cascade were not induced by the bare metal or coated stents. Moreover, the bare metal and albumin-coated stents showed good endothelialization properties.

CONCLUSIONS

Albumin and heparin coatings clearly improve the thrombogenicity of the stents and thus may represent fundamental progress in the treatment of intracranial aneurysms. Moreover, preclinical evaluation of neurovascular stents under physiologic conditions supports and accelerates the development of more biocompatible neurovascular stents.

Electrophoretic Deposition and Characterization of Biocomposites on Magnesium for Orthopedic Applications

The objective of this study is to produce a uniform and consistent nanophase hydroxyapatite (nHA) and poly (lactic-co-glycolic acid) (PLGA) coating on three-dimensional magnesium (Mg) implants using electrophoretic deposition (EPD) process. Mg is biodegradable, mechanically strong, and promising for orthopedic implant and device applications. However, currently available Mg and its alloys degrade too rapidly to meet clinical needs. To control Mg degradation and promote bone ingrowth, nHA/PLGA composite microspheres were synthesized and deposited onto Mg substrates using EPD process. Annealing was applied to improve the coating adhesion. The surface morphology, composition, and coating cross-section were examined using a scanning electron microscope and energy dispersive X-ray spectrometer. The results showed the presence of calcium, phosphorous, carbon, and oxygen peaks, indicating the successful deposition of nHA/PLGA microspheres on Mg. The corrosion resistance of the coated Mg was evaluated using the Tafel test. The results showed that the nHA/PLGA composite coating improved the corrosion resistance of Mg.

Cytocompatibility evaluation of different biodegradable magnesium alloys with human mesenchymal stem cells

In the last few years, the use of biodegradable magnesium (Mg) alloys has evoked great interest in the orthopedic field due to great advantages over long-term implant materials associated with various side effects like allergy and sensitization and consequent implant removal surgeries. However, degradation of these Mg alloys results in ion release, which may cause severe cytotoxicity and undesirable complications after implantation. In this study, we investigated the cytological effects of various Mg alloys on cells that play an important role in bone repair. Eight different magnesium alloys containing varying amounts of Al, Zn, Nd and Y were either incubated directly or indirectly with the osteosarcoma cell line Saos-2 or with uninduced and osteogenically-induced human mesenchymal stem cells (MSCs) isolated from bone marrow specimens obtained from the femoral shaft of patients undergoing total hip replacement. Cell viability, cell attachment and the release of ions were investigated at different time points in vitro. During direct or indirect incubation different cytotoxic effects of the Mg alloys on Saos-2 cells and osteogenically-induced or uninduced MSCs were observed. Furthermore, the concentration of degradation products released from the Mg alloys differed. Overall, Mg alloys MgNd2, MgY4, MgAl9Zn1 and MgY4Nd2 exhibit good cytocompatibility. In conclusion, this study reveals the necessity of cytocompatibility evaluation of new biodegradable magnesium alloys with cells that will get in direct contact to the implant material. Furthermore, the use of standardized experimental in vitro assays is necessary in order to reliably and effectively characterize new Mg alloys before performing in vivo experiments.

The influence of biodegradable magnesium alloys on the osteogenic differentiation of human mesenchymal stem cells

The postdegradation effect of pure Mg, Mg-1Y, Mg-5Al, and Mg-2Ca alloys on the differentiation, proliferation and gene expression of human mesenchymal stem cells (hMSCs) was investigated. It was revealed that that Mg(2+) ions result in an increase in cell proliferation. However, we observed a maximum concentration (approximately 8.0 × 10(-4) M) that was favourable to ATP production, above which ATP production began to decrease. In contrast to proliferation, no maximum concentration for osteogenic differentiation was observed, with increasing concentration of Mg(2+) ions resulting in an increase in osteogenic differentiation across the entire tested range. Interestingly, the Mg-2Ca alloy had minimal effect on osteogenic differentiation, with Mg-1Y and pure Mg having a superior effect on the proliferation and differentiation of hMSCs. This was also observed from gene expression data, where these alloys upregulated TGFβ-1, SMAD4, FGF-2, FGF-10, and BMP-2, while SOX-2, SOX-9, and TNF-α were downregulated. Increased expression of TGFβ-1, SMAD4, BMPs, and COLIA1 protein provided further evidence to support osteogenic differentiation and that the influence of the alloying extracts on differentiation may be via the SMAD signaling pathway.

Magnesium degradation as determined by artificial neural networks

Magnesium degradation under physiological conditions is a highly complex process in which temperature, the use of cell culture growth medium and the presence of CO2, O2 and proteins can influence the corrosion rate and the composition of the resulting corrosion layer. Due to the complexity of this process it is almost impossible to predict the parameters that are most important and whether some parameters have a synergistic effect on the corrosion rate. Artificial neural networks are a mathematical tool that can be used to approximate and analyse non-linear problems with multiple inputs. In this work we present the first analysis of corrosion data obtained using this method, which reveals that CO2 and the composition of the buffer system play a crucial role in the corrosion of magnesium, whereas O2, proteins and temperature play a less prominent role.

An in vitro mechanism study on the proliferation and pluripotency of human embryonic stems cells in response to magnesium degradation

Magnesium (Mg) is a promising biodegradable metallic material for applications in cellular/tissue engineering and biomedical implants/devices. To advance clinical translation of Mg-based biomaterials, we investigated the effects and mechanisms of Mg degradation on the proliferation and pluripotency of human embryonic stem cells (hESCs). We used hESCs as the in vitro model system to study cellular responses to Mg degradation because they are sensitive to toxicants and capable of differentiating into any cell types of interest for regenerative medicine. In a previous study when hESCs were cultured in vitro with either polished metallic Mg (99.9% purity) or pre-degraded Mg, cell death was observed within the first 30 hours of culture. Excess Mg ions and hydroxide ions induced by Mg degradation may have been the causes for the observed cell death; hence, their respective effects on hESCs were investigated for the first time to reveal the potential mechanisms. For this purpose, the mTeSR®1 hESC culture media was either modified to an alkaline pH of 8.1 or supplemented with 0.4–40 mM of Mg ions. We showed that the initial increase of media pH to 8.1 had no adverse effect on hESC proliferation. At all tested Mg ion dosages, the hESCs grew to confluency and retained pluripotency as indicated by the expression of OCT4, SSEA3, and SOX2. When the supplemental Mg ion dosages increased to greater than 10 mM, however, hESC colony morphology changed and cell counts decreased. These results suggest that Mg-based implants or scaffolds are promising in combination with hESCs for regenerative medicine applications, providing their degradation rate is moderate. Additionally, the hESC culture system could serve as a standard model for cytocompatibility studies of Mg in vitro, and an identified 10 mM critical dosage of Mg ions could serve as a design guideline for safe degradation of Mg-based implants/scaffolds.

Nanostructured hydroxyapatite/poly(lactic-co-glycolic acid) composite coating for controlling magnesium degradation in simulated body fluid

Biodegradable magnesium (Mg) and its alloys have many attractive properties (e.g. comparable mechanical properties to cortical bone) for orthopedic implant applications, but they degrade too rapidly in the human body to meet clinical requirements. Nanostructured hydroxyapatite (nHA)/poly(lactic-co-glycolic acid) (PLGA) composite coatings provide synergistic properties for controlling degradation of Mg-based substrates and improving bone-implant integration. In this study, nHA/PLGA composites were spin coated onto Mg-based substrates and the results showed that the nHA/PLGA coatings retained nano-scale features with nHA dispersed in PLGA matrix. In comparison with non-coated Mg, the nHA/PLGA composite coated Mg increased the corrosion potential and decreased the corrosion current in revised simulated body fluid (rSBF). After 24 h of immersion in rSBF, increased calcium phosphate (CaP) deposition and formation of Mg-substituted CaP rosettes were observed on the surface of the nHA/PLGA coated Mg, indicating greater bioactivity. In contrast, no significant CaP was deposited on the PLGA coated Mg. Since both PLGA coating and nHA/PLGA coating showed some degree of delamination from Mg-based substrates during extended immersion in rSBF, the coating processing and properties should be further optimized in order to take full advantage of biodegradable Mg and nHA/PLGA nanocomposites for orthopedic applications.

Effects of magnesium on growth and proliferation of human embryonic stem cells

The effects of magnesium on the growth and proliferation of human embryonic stem cells (hESCs) was explored to advance magnesium as an implant biomaterial. When magnesium ions from magnesium salt were added to the culture media at 10, 100, 250, 500, 750, and 1000 ppm (0.4, 4, 10, 20, 30, 40 mM) the rate of increase in viable cell coverage over time was higher for the larger doses of magnesium salt. Thus, the addition of magnesium ions exerted a positive effect on viable cell coverage. When hESCs were cultured with pure magnesium metal strips through transwell inserts, the cells underwent an initial increase in viable cell coverage, followed by rapid cell death within the first 24 hours. This initial increase in viable cell coverage corresponded to the colonies dispersing and losing their tightly packed morphologies. The cell death may be attributed to an increased alkalinity in the culture media incubated with the magnesium metal strips. In conclusion, since the degradation of magnesium results in both magnesium ions and OH- ions (an increase of pH), controlling the degradation of magnesium to obtain the perfect balance of ions is critical for advancing magnesium as an implant biomaterial.

In vitro degradation and cytocompatibility of magnesium-zinc-strontium alloys with human embryonic stem cells

Magnesium-based alloys have attracted great interest for medical applications due to their unique biodegradable capability and desirable mechanical properties. When considered for medical applications, the degradation rate of these alloys must be tailored so that: (i) it does not exceed the rate at which the degradation products can be excreted from the body, and (ii) it is slow enough so that the load bearing properties of the implant are not jeopardized and do not conflict prior to and during synthesis of new tissue. Implant integration with surrounding cells and tissues and mechanical stability are critical aspects for clinical success. This study investigated Magnesium-Zinc-Strontium (ZSr41) alloy degradation rates and the interaction of the degradation products with human embryonic stem cells (hESC) over a 72 hour period. An in vitro hESC model was chosen due to the higher sensitivity of ESCs to known toxicants which allows to potentially detect toxicological effects of new biomaterials at an early stage. Four distinct ZSr41 compositions (0.15 wt.%, 0.5 wt.%, 1 wt.%, and 1.5 wt.% Sr) were designed and produced through metallurgical processing. ZSr41 alloy mechanical properties, degradation, and cytocompatibility were investigated and compared to pure polished Magnesium (Mg). Mechanical properties evaluated included hardness, ultimate tensile strength, and elongation to failure. Degradation was characterized by measuring total weight loss of samples and pH change in the cell culture media. Cytocompatibility was studied by comparing fluorescence and phase contrast images of hESCs after co-culture with Mg alloys. Results indicated that the Mg-Zn-Sr alloy with 0.15 wt.% Sr improved cytocompatibility and provided slower degradation as compared with pure Mg.

Cytotoxicity studies of AZ31D alloy and the effects of carbon dioxide on its biodegradation behavior in vitro

Magnesium alloys have been advocated as potential artificial bone materials due to their biocompatibility and biodegradability. The understanding of their corrosive mechanism in physiological environments is therefore essential for making application-orientated designs. Thus, this in vitro study was designed to assess the effects of CO2 on corrosive behavior of AZ31D to mimic in vivo special ingredient. Electrochemical technologies accompanied with Scanning electron microscope, Fourier transform infrared, X-ray diffraction, Energy dispersive spectroscopy and hydrogen evolution measurement were employed to analyze corrosive rates and mechanisms of AZ31D. Moreover, the biocompatibility of AZ31D was assessed with a direct cell attachment assay and an indirect cytotoxicity test in different diluted extracts. The ion concentrations in extracts were measured using inductively coupled plasma mass spectrometry to offer explanations on the differences of cell viability in the indirect test. The results of the direct cytotoxicity assay showed that the corrosive rate of AZ31D was too rapid to allow for cell adhesion. Extracts diluted less than 20 times would cause adverse effects on cell proliferation, likely due to excessive ions and gas release. Moreover, the presence of CO2 did not cause significant differences on corrosive behavior of AZ31D according to the results of electrochemical testing and hydrogen evolution measurement. This might be caused by the simultaneous process of precipitation and dissolution of MgCO3 due to the penetration role of CO2. This analysis of corrosive atmospheres on the degradation behavior of magnesium alloys would contribute to the design of more scientific in vitro testing systems in the future.

A study on factors affecting the degradation of magnesium and a magnesium-yttrium alloy for biomedical applications

Controlling degradation of magnesium or its alloys in physiological saline solutions is essential for their potential applications in clinically viable implants. Rapid degradation of magnesium-based materials reduces the mechanical properties of implants prematurely and severely increases alkalinity of the local environment. Therefore, the objective of this study is to investigate the effects of three interactive factors on magnesium degradation, specifically, the addition of yttrium to form a magnesium-yttrium alloy versus pure magnesium, the metallic versus oxide surfaces, and the presence versus absence of physiological salt ions in the immersion solution. In the immersion solution of phosphate buffered saline (PBS), the magnesium-yttrium alloy with metallic surface degraded the slowest, followed by pure magnesium with metallic or oxide surfaces, and the magnesium-yttrium alloy with oxide surface degraded the fastest. However, in deionized (DI) water, the degradation rate showed a different trend. Specifically, pure magnesium with metallic or oxide surfaces degraded the slowest, followed by the magnesium-yttrium alloy with oxide surface, and the magnesium-yttrium alloy with metallic surface degraded the fastest. Interestingly, only magnesium-yttrium alloy with metallic surface degraded slower in PBS than in DI water, while all the other samples degraded faster in PBS than in DI water. Clearly, the results showed that the alloy composition, presence or absence of surface oxide layer, and presence or absence of physiological salt ions in the immersion solution all influenced the degradation rate and mode. Moreover, these three factors showed statistically significant interactions. This study revealed the complex interrelationships among these factors and their respective contributions to degradation for the first time. The results of this study not only improved our understanding of magnesium degradation in physiological environment, but also presented the key factors to consider in order to satisfy the degradation requirements for next-generation biodegradable implants and devices.

In vitro degradation of four magnesium-zinc-strontium alloys and their cytocompatibility with human embryonic stem cells

Magnesium alloys have attracted great interest for medical applications due to their unique biodegradable capability and desirable mechanical properties. When designed for medical applications, these alloys must have suitable degradation properties, i.e., their degradation rate should not exceed the rate at which the degradation products can be excreted from the body. Cellular responses and tissue integration around the Mg-based implants are critical for clinical success. Four magnesium-zinc-strontium (ZSr41) alloys were developed in this study. The degradation properties of the ZSr41 alloys and their cytocompatibility were studied using an in vitro human embryonic stem cell (hESC) model due to the greater sensitivity of hESCs to known toxicants which allows to potentially detect toxicological effects of new biomaterials at an early stage. Four distinct ZSr41 alloys with 4 wt% zinc and a series of strontium compositions (0.15, 0.5, 1, and 1.5 wt% Sr) were produced through metallurgical processing. Their degradation was characterized by measuring total mass loss of samples and pH change in the cell culture media. The concentration of Mg ions released from ZSr41 alloy into the cell culture media was analyzed using inductively coupled plasma atomic emission spectroscopy. Surface microstructure and composition before and after culturing with hESCs were characterized using field emission scanning electron microscopy and energy dispersive X-ray spectroscopy. Pure Mg was used as a control during cell culture studies. Results indicated that the Mg-Zn-Sr alloy with 0.15 wt% Sr provided slower degradation and improved cytocompatibility as compared with pure Mg control.

Interactions between aggressive ions and the surface of a magnesium-yttrium alloy

Magnesium alloys possess many desirable properties for biodegradable orthopedic implants. Unfortunately, magnesium degrades too rapidly in vivo. This rapid degradation reduces the alloys' mechanical properties and increases the alkalinity of the local environment. Controlling the degradation rate and mode is an essential step in the development of magnesium based biomaterials. Accomplishing this essential step will require an improved understanding of magnesium alloy degradation. Herein, three interacting factors controlling magnesium degradation were investigated; (1) alloy composition, (2) alloy surface, (3) presence of aggressive ions in the immersion media. The magnesium-yttrium alloy was more susceptible to degradation in water than the high purity magnesium alloy. However, the polished surface magnesium-yttrium alloy had the least susceptibility to degradation in phosphate buffered saline (PBS) among all the sample compositions and surfaces.

Mg ion implantation on SLA-treated titanium surface and its effects on the behavior of mesenchymal stem cell

Magnesium (Mg) is one of the most important ions associated with bone osseointegration. The aim of this study was to evaluate the cellular effects of Mg implantation in titanium (Ti) surfaces treated with sand blast using large grit and acid etching (SLA). Mg ions were implanted into the surface via vacuum arc source ion implantation. The surface morphology, chemical properties, and the amount of Mg ion release were evaluated by scanning electron microscopy (SEM), Auger electron spectroscopy (AES), Rutherford backscattering spectroscopy (RBS), and inductively coupled plasma-optical emission spectrometer (ICP-OES). Human mesenchymal stem cells (hMSCs) were used to evaluate cellular parameters such as proliferation, cytotoxicity, and adhesion morphology by MTS assay, live/dead assay, and SEM. Furthermore, osteoblast differentiation was determined on the basis of alkaline phosphatase (ALP) activity and the degree of calcium accumulation. In the Mg ion-implanted disk, 2.3×10(16) ions/cm(2) was retained. However, after Mg ion implantation, the surface morphology did not change. Implanted Mg ions were rapidly released during the first 7 days in vitro. The MTS assay, live/dead assay, and SEM demonstrated increased cell attachment and growth on the Mg ion-implanted surface. In particular, Mg ion implantation increased the initial cell adhesion, and in an osteoblast differentiation assay, ALP activity and calcium accumulation. These findings suggest that Mg ion implantation using the plasma source ion implantation (PSII) technique may be useful for SLA-treated Ti dental implants to improve their osseointegration capacity.