Bone turnover markers correlate with implant fixation in a rat model using LPS-doped particles to induced implant loosening

Zucker Diabetic-Sprague Dawley Rats Have Impaired Peri-Implant Bone Formation, Matrix Composition, and Implant Fixation Strength

An increasing number of patients with type 2 diabetes (T2DM) will require total joint replacement (TJR) in the next decade. T2DM patients are at increased risk for TJR failure, but the mechanisms are not well understood. The current study used the Zucker Diabetic-Sprague Dawley (ZDSD) rat model of T2DM with Sprague Dawley (SPD) controls to investigate the effects of intramedullary implant placement on osseointegration, peri-implant bone structure and matrix composition, and fixation strength at 2 and 10 weeks post-implant placement. Postoperative inflammation was assessed with circulating MCP-1 and IL-10 2 days post-implant placement. In addition to comparing the two groups, stepwise linear regression modeling was performed to determine the relative contribution of glucose, cytokines, bone formation, bone structure, and bone matrix composition on osseointegration and implant fixation strength. ZDSD rats had decreased peri-implant bone formation and reduced trabecular bone volume per total volume compared with SPD controls. The osseointegrated bone matrix of ZDSD rats had decreased mineral-to-matrix and increased crystallinity compared with SPD controls. Osseointegrated bone volume per total volume was not different between the groups, whereas implant fixation was significantly decreased in ZDSD at 2 weeks but not at 10 weeks. A combination of trabecular mineral apposition rate and postoperative MCP-1 levels explained 55.6% of the variance in osseointegration, whereas cortical thickness, osseointegration mineral apposition rate, and matrix compositional parameters explained 69.2% of the variance in implant fixation strength. The results support the growing recognition that both peri-implant structure and matrix composition affect implant fixation and suggest that postoperative inflammation may contribute to poor outcomes after TJR surgeries in T2DM patients. © 2023 The Authors. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.

Impacts of residual 3D printing metal powders on immunological response and bone regeneration: an in vivo study

Residual powder is a defect in powder bed fusion-based additive manufacturing (3D printing), and it is difficult to completely remove it from as-printed materials. In addition, it is not necessary to apply 3D printed implants with residual powder in the clinic. The immunological response triggered by the residual powder is an important area of study in medical research. To further understand the possible immunological reactions and hidden dangers caused by residual powders in vivo, this study compared the immunological reactions and osteolysis caused by typical powders for four implant materials: 316 L stainless steel, CoCrMo, CP-Ti, and Ti-6Al-4V (particle size range of 15-45 μm), in a mouse skull model. Furthermore, the possible immunological responses and bone regeneration induced by the four 3D printed implants with residual powder in a rat femur model were compared. In the mouse skull model, it was found that the 316L-S, CoCrMo-S, and especially the 316L-M powders, upregulated the expression of pro-inflammatory factors, increased the ratio of RANKL/OPG, and activated more functional osteoclasts, resulting in more severe bone resorption compared with those in other groups. In the rat femur model, which is more suitable for clinical practice, there is no bone resorption in implants with residual powders, but they show good bone regeneration and integration ability because of their original roughness. The results indicate that the expressions of inflammatory cytokines in all experimental groups were the same as those in the control group, showing good biological safety. The results answered some critical questions related to additively manufactured medical materials in vivo and indicated that as-printed implants may have great potential in future clinical applications.

The relative contribution of bone microarchitecture and matrix composition to implant fixation strength in rats

Bone microarchitectural parameters significantly contribute to implant fixation strength but the role of bone matrix composition is not well understood. To determine the relative contribution of microarchitecture and bone matrix composition to implant fixation strength, we placed titanium implants in 12-week-old intact Sprague-Dawley rats, ovariectomized-Sprague-Dawley rats, and Zucker diabetic fatty rats. We assessed bone microarchitecture by microcomputed tomography, bone matrix composition by Raman spectroscopy, and implant fixation strength at 2, 6, and 10 weeks postimplantation. A stepwise linear regression model accounted for 83.3% of the variance in implant fixation strength with osteointegration volume/total volume (50.4%), peri-implant trabecular bone volume fraction (14.2%), cortical thickness (9.3%), peri-implant trabecular crystallinity (6.7%), and cortical area (2.8%) as the independent variables. Group comparisons indicated that osseointegration volume/total volume was significantly reduced in the ovariectomy group at Week 2 (~28%) and Week 10 (~21%) as well as in the diabetic group at Week 10 (~34%) as compared with the age matched Sprague-Dawley group. The crystallinity of the trabecular bone was significantly elevated in the ovariectomy group at Week 2 (~4%) but decreased in the diabetic group at Week 10 (~3%) with respect to the Sprague-Dawley group. Our study is the first to show that bone microarchitecture explains most of the variance in implant fixation strength, but that matrix composition is also a contributing factor. Therefore, treatment strategies aimed at improving bone-implant contact and peri-implant bone volume without compromising matrix quality should be prioritized.

Ibudilast Mitigates Delayed Bone Healing Caused by Lipopolysaccharide by Altering Osteoblast and Osteoclast Activity

Bacterial infection in orthopedic surgery is challenging because cell wall components released after bactericidal treatment can alter osteoblast and osteoclast activity and impair fracture stability. However, the precise effects and mechanisms whereby cell wall components impair bone healing are unclear. In this study, we characterized the effects of lipopolysaccharide (LPS) on bone healing and osteoclast and osteoblast activity in vitro and in vivo and evaluated the effects of ibudilast, an antagonist of toll-like receptor 4 (TLR4), on LPS-induced changes. In particular, micro-computed tomography was used to reconstruct femoral morphology and analyze callus bone content in a femoral defect mouse model. In the sham-treated group, significant bone bridge and cancellous bone formation were observed after surgery, however, LPS treatment delayed bone bridge and cancellous bone formation. LPS inhibited osteogenic factor-induced MC3T3-E1 cell differentiation, alkaline phosphatase (ALP) levels, calcium deposition, and osteopontin secretion and increased the activity of osteoclast-associated molecules, including cathepsin K and tartrate-resistant acid phosphatase in vitro. Finally, ibudilast blocked the LPS-induced inhibition of osteoblast activation and activation of osteoclast in vitro and attenuated LPS-induced delayed callus bone formation in vivo. Our results provide a basis for the development of a novel strategy for the treatment of bone infection.

The gut microbiota may be a novel pathogenic mechanism in loosening of orthopedic implants in rats

Particles released from implants cause inflammatory bone loss, which is a key factor in aseptic loosening, the most common reason for joint replacement failure. With the anticipated increased incidence of total joint replacement in the next decade, implant failure will continue to burden patients. The gut microbiome is increasingly recognized as an important factor in bone physiology, however, its role in implant loosening is currently unknown. We tested the hypothesis that implant loosening is associated with changes in the gut microbiota in a preclinical model. When the particle challenge caused local joint inflammation, decreased peri-implant bone volume, and decreased implant fixation, the gut microbiota was affected. When the particle challenge did not cause this triad of local effects, the gut microbiota was not affected. Our results suggest that cross-talk between these compartments is a previously unrecognized mechanism of failure following total joint replacement.

Early changes in serum osteocalcin and body weight are predictive of implant fixation in a rat model of implant loosening

Biomarkers are of interest to identify patients at risk for peri-implant osteolysis and aseptic loosening. We used a rat model of particle-induced peri-implant osteolysis to investigate if early changes in biomarkers were associated with subsequent implant fixation strength. Implants were placed in rat femora, which were then challenged with intra-articular knee injections of either clean polyethylene, lipopolysaccharide-doped polyethylene, or cobalt-chromium alloy particles, with particle-free vehicle serving as control (n ≥ 8 per group). Rats were weighed weekly, blood was collected at weeks 0, 3, 5, and 6, and locomotor behavior was assessed 4 days before study conclusion. Rats were euthanized 6 weeks post surgery. Week 6 serum was analyzed for five bone remodeling markers, while longitudinal serum was assessed for osteocalcin. Bone-implant contact, peri-implant trabecular architecture, and implant fixation strength were measured. Rats challenged with cobalt-chromium particles had a significant reduction in implant fixation strength compared with the vehicle-control group (P = .034). This group also had elevated serum osteocalcin (P = .005), depressed weight gain (P = .001) and less frequent rearing behavior (P = .029). Regardless of group, change in serum osteocalcin at week 3 (r = -.368; P = .046), change in weight at week 2 (r = .586; P < .001), as well as weight change at all other time intervals were associated with fixation strength. The finding that early alterations in serum osteocalcin and body weight were predictive of subsequent implant fixation strength supports continued investigation of biomarkers for early detection of peri-implant osteolysis and implant loosening. Further, change in biomarker levels was found to be more indicative of implant fixation status than any single measurement.

Synovial Fluid Interleukin-16 Contributes to Osteoclast Activation and Bone Loss through the JNK/NFATc1 Signaling Cascade in Patients with Periprosthetic Joint Infection

Because of lipopolysaccharide (LPS)-mediated effects on osteoclast differentiation and bone loss, periprosthetic joint infection (PJI) caused by Gram-negative bacteria increases the risk of aseptic loosening after reimplantation. Synovial fluid interleukin-16 (IL-16) expression was higher in patients with PJI than in patients without joint infection. Thus, we explored the effects of IL-16 on bone. We investigated whether IL-16 modulates osteoclast or osteoblast differentiation in vitro. An LPS-induced bone loss mice model was used to explore the possible advantages of IL-16 inhibition for the prevention of bone loss. IL-16 directly activated p38 and c-Jun N-terminal kinase (JNK)/mitogen-activated protein kinase (MAPK) signaling and increased osteoclast activation markers, including tartrate-resistant acid phosphatase (TRAP), cathepsin K, and nuclear factor of activated T cells 1 (NFATc1). IL-16 directly caused monocytes to differentiate into TRAP-positive osteoclast-like cells through NFATc1 activation dependent on JNK/MAPK signaling. Moreover, IL-16 did not alter alkaline phosphatase activity or calcium deposition during osteoblastic differentiation. Finally, IL-16 inhibition prevented LPS-induced trabecular bone loss and osteoclast activation in vivo. IL-16 directly increased osteoclast activation through the JNK/NFATc1 pathway. IL-16 inhibition could represent a new strategy for treating infection-associated bone loss.

Periprosthetic Joint Infection Caused by Gram-Positive Versus Gram-Negative Bacteria: Lipopolysaccharide, but not Lipoteichoic Acid, Exerts Adverse Osteoclast-Mediated Effects on the Bone

Periprosthetic joint infection (PJI)-the most common cause of knee arthroplasty failure-may result from Gram-positive (GP) or Gram-negative (GN) bacterial infections. The question as to whether PJI due to GP or GN bacteria can lead to different rates of aseptic loosening after reimplantation remains open. We have investigated this issue through a retrospective review of clinical records obtained from 320 patients with bacterial PJI. The results revealed that, compared with GP infections, GN infections were associated with an increased risk of aseptic loosening. In animal studies, mice underwent intrafemoral injection of lipopolysaccharide (LPS) from GN bacteria or lipoteichoic acid (LTA) from GP bacteria. We demonstrate that LPS-but not LTA-reduced both the number of trabeculae and the bone mineral density in mice. In addition, LPS-treated mice exhibited a reduced body weight, higher serum osteocalcin levels, and an increased number of osteoclasts. LPS accelerated monocyte differentiation into osteoclast-like cells, whereas LTA did not. Finally, ibudilast-a toll-like receptor (TLR)-4 antagonist-was found to inhibit LPS-induced bone loss and osteoclast activation in mice. Taken together, our data indicate that PJI caused by GN bacteria portends a higher risk of aseptic loosening after reimplantation, mainly because of LPS-mediated effects on osteoclast differentiation.

Effects of sequential treatment with intermittent parathyroid hormone and zoledronic acid on particle-induced implant loosening: Evidence from a rat model

Particle-induced implant loosening is a major challenge to long-term survival of joint prostheses. Administration of intermittent parathyroid hormone (PTH) has shown potential in the treatment of cases of early-stage periprosthetic osteolysis, while sequential administration of intermittent PTH (iPTH) and bisphosphonates (Bps) has achieved significant effects on treatment of postmenopausal osteoporosis. The objective of this study was to determine whether sequential treatment could preserve bone mass and implant fixation during a pathological course of peri-implant osteolysis in a rat model. Ninety male Sprague Dawley rats were randomly divided into nine groups, four of which were used for confirmation of establishment of the peri-implant osteolysis model at two time points, while the other five were used to determine the efficiency of the sequential treatment on peri-implant osteolysis. Implant fixation and peri-implant bone mass were evaluated using biomechanical testing, micro-CT analysis, and histology at 6 and 12 weeks postoperative. The biomechanical test demonstrated that the maximum loading force during a push-out test was significantly elevated in the sequential treatment group compared to the osteolysis group and iPTH withdrawal group at 12 weeks. Peri-implant bone morphology also indicated a robust increase in bone volume in the sequential treatment group. Sequential administration of iPTH and Bps was effective in preventing experimental peri-implant osteolysis, resulting in improved implant fixation and increased peri-implant bone volume. Clinical significance: The innovative application of sequential treatment in peri-implant osteolysis could be used clinically to improve the prognosis of patients with early-stage periprosthetic osteolysis. © 2019 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 37:1489-1497, 2019.

Pulsed electromagnetic fields and platelet rich plasma alone and combined for the treatment of wear-mediated periprosthetic osteolysis: An in vivo study

Wear-mediated osteolysis is a common complication occurring around implanted prosthesis, which ultimately leads to bone loss with mechanical instability and the need for surgical revision. At the moment, revision surgery is the only effective treatment. The aim of this study was to assess the efficacy of pulsed electromagnetic fields (PEMFs) and platelet rich plasma (PRP), alone and in association, in a clinically relevant in vivo model of periprosthetic osteolysis. Titanium alloy pins were implanted intramedullary in distal femurs of male inbred rats and, after osseointegration, polyethylene particles were injected intra-articularly to induce osteolysis. Animals were divided in four groups of treatment: PEMFs, PRP, PEMFs + PRP and no treatment. Microtomography was performed during the course of experiments to monitor bone stock and microarchitecture. Histology, histomorphometry, immunohistochemistry and biomechanics were evaluated after treatments. Biophysical and biological stimulations significantly enhanced bone to implant contact, bone volume and bone microhardness and reduced fibrous capsule formation and the number of osteoclasts around implants. Among treatments, PEMFs alone and in association with PRP exerted better results than PRP alone. Present data suggest that biophysical stimulation, with or without the enrichment with platelet derived growth factors, might be a safe, mini-invasive and conservative therapy for counteracting osteolysis and prompting bone formation around implants.

STATEMENT OF SIGNIFICANCE

Pulsed electromagnetic fields (PEMFs) and platelet rich plasma (PRP) show anabolic and anti-inflammatory effects and they are already been used in clinical practice, but separately. To date, there are no preclinical in vivo studies evaluating their combined efficacy in periprosthetic osteolysis, in bone tissue microarchitecture and in biomechanics. The aim of the present study was to evaluate the effects of PEMFs and PRP in vivo, when administered individually and in combination in the treatment of periprosthetic wear mediated ostelysis, and in restoring the osteogenetic properties of perimplant bone tissue and its biomechanical competence. The combination of PEMFs and PRP could be employed for counteracting the ostelysis process in a conservative and non surgical manner.

Optimizing a micro-computed tomography-based surrogate measurement of bone-implant contact

Histology and backscatter scanning electron microscopy (bSEM) are the current gold standard methods for quantifying bone-implant contact (BIC), but are inherently destructive. Microcomputed tomography (μCT) is a non-destructive alternative, but attempts to validate μCT-based assessment of BIC in animal models have produced conflicting results. We previously showed in a rat model using a 1.5 mm diameter titanium implant that the extent of the metal-induced artefact precluded accurate measurement of bone sufficiently close to the interface to assess BIC. Recently introduced commercial laboratory μCT scanners have smaller voxels and improved imaging capabilities, possibly overcoming this limitation. The goals of the present study were to establish an approach for optimizing μCT imaging parameters and to validate μCT-based assessment of BIC. In an empirical parametric study using a 1.5 mm diameter titanium implant, we determined 90 kVp, 88 µA, 1.5 μm isotropic voxel size, 1600 projections/180°, and 750 ms integration time to be optimal. Using specimens from an in vivo rat experiment, we found significant correlations between bSEM and μCT for BIC with the manufacturer's automated analysis routine (r = 0.716, p = 0.003) or a line-intercept method (r = 0.797, p = 0.010). Thus, this newer generation scanner's improved imaging capability reduced the extent of the metal-induced artefact zone enough to permit assessment of BIC. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:979-986, 2018.

Sophocarpine attenuates wear particle-induced implant loosening by inhibiting osteoclastogenesis and bone resorption via suppression of the NF-κB signalling pathway in a rat model

BACKGROUND AND PURPOSE

Aseptic prosthesis loosening, caused by wear particles, is one of the most common causes of arthroplasty failure. Extensive and over-activated osteoclast formation and physiological functioning are regarded as the mechanism of prosthesis loosening. Therapeutic modalities based on inhibiting osteoclast formation and bone resorption have been confirmed to be an effective way of preventing aseptic prosthesis loosening. In this study, we have investigated the effects of sophocarpine (SPC, derived from Sophora flavescens) on preventing implant loosening and further explored the underlying mechanisms.

EXPERIMENTAL APPROACH

The effects of SPC in inhibiting osteoclastogenesis and bone resorption were evaluated in osteoclast formation, induced in vitro by the receptor activator of NF-κB ligand (RANKL). A rat femoral particle-induced peri-implant osteolysis model was established. Subsequently, micro-CT, histology, mechanical testing and bone turnover were used to assess the effects of SPC in preventing implant loosening.

KEY RESULTS

In vitro, we found that SPC suppressed osteoclast formation, bone resorption, F-actin ring formation and osteoclast-associated gene expression by inhibiting NF-κB signalling, specifically by targeting IκB kinases. Our in vivo study showed that SPC prevented particle-induced prosthesis loosening by inhibiting osteoclast formation, resulting in reduced periprosthetic bone loss, diminished pseudomembrane formation, improved bone-implant contact, reduced bone resorption-related turnover and enhanced stability of implants. Inhibition of NF-κB signalling by SPC was confirmed in vivo.

CONCLUSION AND IMPLICATIONS

SPC can prevent implant loosening through inhibiting osteoclast formation and bone resorption. Thus, SPC might be a novel therapeutic agent to prevent prosthesis loosening and for osteolytic diseases.

Arthrotomy-based preclinical models of particle-induced osteolysis: A systematic review

We completed a systematic literature review of in vivo animal models that use arthrotomy-based methods to study particle-induced peri-implant osteolysis. The purpose of the review was to characterize the models developed to date, to determine the questions addressed, to assess scientific rigor and transparency, and to identify gaps in knowledge. We probed three literature databases (Medline, Embase, and Scopus) and found 77 manuscripts that fit the search parameters. In the most recent 10 years, researchers mainly used rat and mouse models, whereas in the previous 20 years, large animal, canine, and rabbit models were more common. The studies have demonstrated several pathophysiology pathways, including macrophage migration, particle phagocytosis, increased local production of cytokines and lysosomal enzymes, elevated bone resorption, and suppressed bone formation. The effect of variation in particle characteristics and concentration received limited attention with somewhat mixed findings. Particle contamination by endotoxin was shown to exacerbate peri-implant osteolysis. The possibility of early diagnosis was demonstrated through imaging and biomarker approaches. Several studies showed that both local and systemic delivery of bisphosphonates inhibits the development of particle-induced osteolysis. Other methods of inhibiting osteolysis include the use of anabolic agents and altering the implant design. Few studies examined non-surgical rescue of loosened implants, with conflicting results with alendronate. We found that the manuscripts often lacked the methodological detail now advocated by the ARRIVE guidelines, suggesting that improvement in reporting would be useful to maximize rigor and transparency. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:2595-2605, 2017.

Bone Mineral Density is Lower in Patients with Severe Knee Osteoarthritis and Attrition

Bone quality is probably important for the survival of knee arthroplasty (KA), but little is known about systemic bone mineral density and bone turnover in patients prior to KA surgery. The aim of this study was to explore the prevalence of osteoporosis and bone turnover in relation to knee osteoarthritis (OA) grade in patients scheduled for KA surgery. Prospective preoperative evaluation of 450 patients (259 females) prior to KA between 2014 and 2016 with standing knee radiography, Dual-energy X-ray absorptiometry (DXA), biomarkers for bone turnover (CTX, P1NP), and vitamin D. Grading of knee OA was done with the Altman Atlas and Kellgren Lawrence (KL). Adjustments for age and BMI were made. The mean age was 67.9 years (range 39-94), and mean BMI was 28.8 (SD 4.8). The prevalence of osteoporosis was 9.6% (CI 95% 7.2; 12.7), while the proportion of patients with osteopenia was 36.0%. T score was similar between KL OA grade 3 and 4 (p = 0.06); however, T score was lower (p = 0.02) with the worst knee OA grade (attrition). The median serum Vitamin D level was 78.5 nmol/L (range 10-196), and there was no association between serum vitamin D and the grade of OA (p > 0.88). P1NP was significantly higher in KL grade 4 compared to KL grade 3 (p = 0.03), but there was no association between KL grade and CTX (p = 0.21). 10% had osteoporosis, which is similar to the age-matched background population. Bone mineral density was lower with severe knee osteoarthritis (attrition), and P1NP was higher with worse osteoarthritis grading.

PTH[1-34] improves the effects of core decompression in early-stage steroid-associated osteonecrosis model by enhancing bone repair and revascularization

Steroid-associated osteonecrosis (SAON) might induce bone collapse and subsequently lead to joint arthroplasty. Core decompression (CD) is regarded as an effective therapy for early-stage SAON, but the prognosis is unsatisfactory due to incomplete bone repair. Parathyroid hormone[1–34] (PTH[1–34]) has demonstrated positive efficacy in promoting bone formation. We therefore evaluated the effects of PTH on improving the effects of CD in Early-Stage SAON. Distal femoral CD was performed two weeks after osteonecrosis induction or vehicle injection, with ten of the ON-induced rabbits being subjected to six-week PTH[1–34] treatment and the others, including ON-induced and non-induced rabbits, being treated with vehicle. MRI confirmed that intermittent PTH administration improved SAON after CD therapy. Micro-CT showed increased bone formation within the tunnel. Bone repair was enhanced with decreased empty osteocyte lacunae and necrosis foci area, resulting in enhanced peak load and stiffness of the tunnel. Additionally, PTH enlarged the mean diameter of vessels in the marrow and increased the number of vessels within the tunnels, as well as elevated the expression of BMP-2, RUNX2, IGF-1, bFGF and VEGF, together with serum OCN and VEGF levels. Therefore, PTH[1–34] enhances the efficacy of CD on osteogenesis and neovascularization, thus promoting bone and blood vessels repair in the SAON model.

Different activation of monocyte-derived macrophages by antimicrobial peptides at a titanium tibial implantation in rabbits

The aim of our study was to assess the functional and morphological features of monocyte derived Mfs from rabbits with titanium (Ti) tibial implants, their ability to polarize towards M1 or M2 and their reactivity after stimulation with neutrophil antimicrobial peptides extract (AMP). The study was conducted on six White New Zealand rabbits with tibial implants of pure titanium Grade 2. Blood was taken before implantation and 14days after biomaterial implantation. Then, blood-derived Mfs were cultured and their function was assessed on the basis of morphological changes, generation of nitric oxide (NO), superoxide, and proteases release after treatment with LPS or dexamethasone (Dex). As a result of polarization we specified two subpopulations of Mfs with features characteristic of each subtype. M1 stimulated with LPS exhibited an increased NO and superoxide level, and M2 stimulated with Dex which showed higher arginase and lower free radical generation. Addition of AMP evoked further changes in Mfs morphology and function. After 24h stimulation with AMP an increase of NO was observed in all cultures, whereas after 48h it decreased. Production of superoxide lowered, especially after 48h, when M1 generated 6.00±0.2nM and M1/AMP culture generated 5.2±0.1nM of superoxide. Our study revealed that activated Mfs stimulated with AMP demonstrated both pro- and anti-inflammatory features. Moreover, we did not detect significant differences between the response of Mfs cultured from blood derived monocytes before and after implantation of Ti implants.

RAW 264.7 co-cultured with ultra-high molecular weight polyethylene particles spontaneously differentiate into osteoclasts: an in vitro model of periprosthetic osteolysis

Wear-particle osteolysis affects prosthesis survival leading to implant loosening up to 70% of revisions. Therapeutic strategies are increasing, however alternative testing methods to experimentally evaluate such treatments are lacking. The aim of this study was to reproduce an in vitro osteolysis model recapitulating the events that, starting from the exposure of macrophages to polyethylene, lead to the establishment of osteoclastogenesis and inflammation. Responses to polyethylene, at 3 and 7 days, in a macrophage cell line, RAW 264.7, were determined by DNA quantification, immunofluorescence, pit assay, gene expression, cytokine production and NF-kB activation. Results showed that 3 days exposure to particles could induce a significant production of Tumor Necrosis Factor alpha (p < 0.0005) and Prostaglandin E₂ (p < 0.005) compared to controls. Particles also induced macrophages to spontaneously differentiate into mature and active osteoclasts, in terms of identification of multinucleated cells by Phalloidin staining and by the analysis of osteoclast-specific gene markers. In particular, at 3 days polyethylene induced a significant up-regulation of Nuclear Factor of Activated T-cells, cytoplasmic 1, Receptor Activator of Nuclear factor Kappa-B and Receptor Activator of Nuclear Factor Kappa-B Ligand genes (p < 0.0005) compared to controls. At protein level, the particles induced a significant increase of Receptor Activator of Nuclear Factor Kappa-B Ligand at day 7 over controls (p < 0.0005). Osteoclasts were capable to resorb bone even in absence of differentiating factors. The possible mechanism, beside spontaneous osteoclastogenesis mediated by wear debris, was identified in an autocrine up-regulation of Receptor activator of nuclear factor kappa-B ligand gene expression and protein synthesis. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 105A: 510-520, 2017.

Intramembranous bone regeneration and implant placement using mechanical femoral marrow ablation: rodent models

In this paper, we provide a detailed protocol for a model of long bone mechanical marrow ablation in the rodent, including surgical procedure, anesthesia, and pre- and post-operative care. In addition, frequently used experimental end points are briefly discussed. This model was developed to study intramembranous bone regeneration following surgical disruption of the marrow contents of long bones. In this model, the timing of the appearance of bone formation and remodeling is well-characterized and therefore the model is well-suited to evaluate the in vivo effects of various agents which influence these processes. When biomaterials such as tissue engineering scaffolds or metal implants are placed in the medullary cavity after marrow ablation, end points relevant to tissue engineering and implant fixation can also be analyzed. By sharing a detailed protocol, we hope to improve inter-laboratory reproducibility.

Sclerostin antibody treatment improves implant fixation in a model of severe osteoporosis

BACKGROUND

The mechanical fixation of orthopaedic and dental implants is compromised by diminished bone volume, such as with osteoporosis. Systemic administration of sclerostin antibody (Scl-Ab) has been shown to enhance implant fixation in normal animals. In the present study, we tested whether Scl-Ab can improve implant fixation in established osteoporosis in a rat model.

METHODS

We used an ovariectomized (ovx) rat model, in which we found a 78% decrease in trabecular bone volume at the time of implant surgery; sham-ovx, age-matched rats were used as controls. After placement of a titanium implant in the medullary cavity of the distal aspect of the femur, the rats were maintained for four, eight, or twelve weeks and treated biweekly with Scl-Ab or with the delivery vehicle alone. Outcomes were measured with use of microcomputed tomography, mechanical testing, and static and dynamic histomorphometry.

RESULTS

Scl-Ab treatment doubled implant fixation strength in both the sham-ovx and ovx groups, although the enhancement was delayed in the ovx group. Scl-Ab treatment also enhanced bone-implant contact; increased peri-implant trabecular thickness and volume; and increased cortical thickness. These structural changes were associated with an approximately five to sevenfold increase in the bone-formation rate and a >50% depression in the eroded surface following Scl-Ab treatment. Trabecular bone thickness and bone-implant contact accounted for two-thirds of the variance in fixation strength.

CONCLUSIONS

In this model of severe osteoporosis, Scl-Ab treatment enhanced implant fixation by stimulating bone formation and suppressing bone resorption, leading to enhanced bone-implant contact and improved trabecular bone volume and architecture.

CLINICAL RELEVANCE

Systemic administration of anti-sclerostin antibodies might be a useful strategy in total joint replacement when bone mass is deficient.

Are there biological markers for wear or corrosion? A systematic review

BACKGROUND

Identification of biomarkers associated with wear and tribocorrosion in joint arthroplasty would be helpful to enhance early detection of aseptic loosening and/or osteolysis and to improve understanding of disease progression. There have been several new reports since the last systematic review (which covered research through mid-2008) justifying a new assessment.

QUESTIONS/PURPOSES

We sought to determine which biomarkers have the most promise for early diagnosis and monitoring of aseptic loosening and/or osteolysis related to wear or corrosion in total joint arthroplasty.

METHODS

We performed a systematic review using MEDLINE and EMBASE databases, covering the period through December 2013, and identified 1050 articles. We restricted the definition of biomarker to biomolecules and imaging parameters useful for diagnosis and monitoring of disease progression, only including articles in English. We chose 65 articles for full review, including 44 from the original search and 21 from subsequent hand searches. We used the 22 articles in which patients with total joint arthroplasty who had aseptic loosening and/or periimplant osteolysis unrelated to sepsis had been compared with patients with total joint arthroplasty with stable implants. There were 90 comparisons of these two patient populations involving 35 different biomarkers.

RESULTS

Diagnostic accuracy was assessed in nine of the 90 comparisons with the highest accuracy found for tartrate-resistant acid phosphatase 5b (0.96), although a separate comparison for this biomarker found a lower accuracy (0.76). Accuracy of > 0.80 was also found for crosslinked n-telopeptide of type I collagen, osteoprotegerin, and deoxypyridinoline. The most studied markers, tumor necrosis factor-α and interleukin-1β, were found to differ in the affected and control groups in < 30% of the comparisons. Thirty of the 35 biomarkers were studied in four or fewer separate comparisons with nearly half of the biomarkers (17) studied in only one comparison. Many of the comparisons were not able to eliminate a number of confounding variables, and there was only one prospective study.

CONCLUSIONS

Currently, there are no validated biomarkers for early diagnosis and monitoring of the biological sequelae of wear or tribocorrosion, although there are some promising leads, including markers of bone turnover.

Particle-induced osteolysis is not accompanied by systemic remodeling but is reflected by systemic bone biomarkers

Particle-induced osteolysis is caused by an imbalance in bone resorption and formation, often leading to loss of implant fixation. Bone remodeling biomarkers may be useful for identification of osteolysis and studying pathogenesis, but interpretation of biomarker data could be confounded if local osteolysis engenders systemic bone remodeling. Our goal was to determine if remote bone remodeling contributes to biomarker levels. Serum concentrations of eight biomarkers and bone remodeling rates at local (femur), contiguous (tibia), and remote (humerus and lumbar vertebra) sites were evaluated in a rat model of particle-induced osteolysis. Serum CTX-1, cathepsin K, PINP, and OPG were elevated and osteocalcin was suppressed in the osteolytic group, but RANKL, TRAP 5b, and sclerostin were not affected at the termination of the study at 12 weeks. The one marker tested longitudinally (CTX-1) was elevated by 3 weeks. We found increased bone resorption and decreased bone formation locally, subtle differences in contiguous sites, but no differences remotely at 12 weeks. Thus, the skeletal response to local particle challenge was not systemic, implying that the observed differences in serum biomarker levels reflect differences in local remodeling.

Implant placement increases bone remodeling transiently in a rat model

To examine bone remodeling following implant placement, 88 female Sprague-Dawley rats underwent either sham ovariectomy (sham-ovx) or ovariectomy (ovx) at 4.5 months. At 11 months, 17 baseline control animals were euthanized, while 71 rats received bilateral intramedullary femoral implants. Implanted rats were randomized to 4-, 8-, or 12-week follow-up times. Microcomputed tomography was used to assess cortical area and trabecular architecture in all rats. Dynamic and static histomorphometry were performed in a subset to examine the trabecular and endocortical bone in the distal femoral metaphysis adjacent to the implant and the periosteal surface at the midshaft superior to the implant (n = 59). Implantation did not affect bone volume in either sham-ovx or ovx rats compared to baseline controls. Implant placement significantly increased mineralizing surface, mineral apposition rate, and bone formation rate in both sham-ovx and ovx rats at the trabecular and endocortical surfaces at four and sometimes 8 weeks, with a return to baseline values by 12 weeks. At the periosteal surface, implant placement increased bone formation at 4 weeks with a return to baseline levels by 8 weeks. Thus, implant placement increases bone remodeling transiently without affecting bone volume in sham-ovx and ovx rats.