Cell-free scaffolds with different stiffness but same microstructure promote bone regeneration in rabbit large bone defect model

KLF9 regulates osteogenic differentiation of mesenchymal stem cells

Osteoporosis is a progressive skeletal disease which is characterized by reduced bone mass and degradation of bone microstructure. Mesenchymal stem cells (MSCs) have the potential to inhibit osteoporosis since they are multipotent stem cells that can differentiate into multiple types of cells including osteoblasts. Hence the mechanism of osteogenic differentiation of MSCs deserves comprehensive study. Here we report that KLF9 is a novel regulator in osteogenic differentiation of MSCs. We observed that depletion of KLF9 can largely compromise the osteogenic differentiation ability of MSCs. In addition, we revealed that inhibition of the PI3K-Akt pathway could also affect osteogenic differentiation since KLF9 depletion inhibits PI3K expression. Finally, we discovered that KLF9 expression can be induced by dexamethasone which is an essential component in osteogenic induction medium. Taken together, our study provides new insights into the regulatory role of KLF9 in osteogenic differentiation of MSCs.

Use of allograft bone matrix in clinical orthopedics

Clinical orthopedics continuously aims to improve methods for bone formation. Clinical applications where bone formation is necessary include critical long bone defects in orthopedic trauma or tumor patients. Though some biomaterials combined with autologous stem cells significantly improve bone repair, critical-size damages are still challenged with the suitable implantation of biomaterials and donor cell survival. Extracellular matrix (ECM) is the fundamental structure in tissues that can nest and nourish resident cells as well as support specific functions of the tissue type. ECM also plays a role in cell signaling to promote bone growth, healing and turnover. In the last decade, the use of bone-derived ECMs or ECM-similar biomaterials have been widely investigated, including decellularized and demineralized bone ECM. In this article, we reviewed the current productions and applications of decellularized and demineralized bone matrices. We also introduce the current study of whole limb decellularization and recellularization.

A review on the effect of nanocomposite scaffolds reinforced with magnetic nanoparticles in osteogenesis and healing of bone injuries

Many problems related to disorders and defects of bone tissue caused by aging, diseases, and injuries have been solved by the multidisciplinary research field of regenerative medicine and tissue engineering. Numerous sciences, especially nanotechnology, along with tissue engineering, have greatly contributed to the repair and regeneration of tissues. Various studies have shown that the presence of magnetic nanoparticles (MNPs) in the structure of composite scaffolds increases their healing effect on bone defects. In addition, the induction of osteogenic differentiation of mesenchymal stem cells (MSCs) in the presence of these nanoparticles has been investigated and confirmed by various studies. Therefore, in the present article, the types of MNPs, their special properties, and their application in the healing of damaged bone tissue have been reviewed. Also, the molecular effects of MNPs on cell behavior, especially in osteogenesis, have been discussed. Finally, the present article includes the potential applications of MNP-containing nanocomposite scaffolds in bone lesions and injuries. In summary, this review article highlights nanocomposite scaffolds containing MNPs as a solution for treating bone defects in tissue engineering and regenerative medicine.

Aptamer/Hydroxyapatite-Functionalized Titanium Substrate Promotes Implant Osseointegration via Recruiting Mesenchymal Stem Cells

Endowing bone regeneration materials with both stem cell recruitment and osteoinduction properties is a key factor in promoting osseointegration of titanium (Ti) implants. In this study, Apt19s-grafted oxidized hyaluronic acid (OHA) was deposited onto a protein-mediated biomineralization hydroxyapatite (HAp) coating of Ti. HAp was achieved by the treatment of lysozyme and tris(2-carboxyethyl) phosphonate mixture and then soaked in calcium ion (Ca²⁺) solution to obtain functional Ti substrate (Ti/HAp/OHA-Apt). In vitro studies confirmed that Ti/HAp/OHA-Apt could effectively maintain the sustained release of Apt19s from Ti for 7 days. The released Apt19s significantly enhanced the migration of bone marrow mesenchymal stem cells (MSCs), which was reflected by the experiment of transwell assay, wound healing, and zymogram detection. Compared with pure Ti, Ti/HAp/OHA-Apt was able to adjust the adsorption of functional proteins at the Ti-based interface to expose their active sites, which significantly increased the expression of adhesion-associated proteins (vinculin and tensin) in MSCs to promote their adhesion on Ti-based interface. In vitro cell experiments of alkaline phosphatase activity staining, mineralization detection, and expression of osteogenesis-related genes showed that Ti/HAp/OHA-Apt significantly enhanced the osteogenic differentiation ability of MSCs, which may be highly related to the porous structure of hydroxyapatite on Ti interface. In vivo test of Micro-CT, H&E staining, and histochemical staining further confirmed that Ti/HAp/OHA-Apt was able to promote MSC recruitment at the peri-implant interface to form new bone. This work provides a new approach to develop functional Ti-based materials for bone defect repair.

An overview of substrate stiffness guided cellular response and its applications in tissue regeneration

Cell-matrix interactions play a critical role in tissue repair and regeneration. With gradual uncovering of substrate mechanical characteristics that can affect cell-matrix interactions, much progress has been made to unravel substrate stiffness-mediated cellular response as well as its underlying mechanisms. Yet, as a part of cell-matrix interaction biology, this field remains in its infancy, and the detailed molecular mechanisms are still elusive regarding scaffold-modulated tissue regeneration. This review provides an overview of recent progress in the area of the substrate stiffness-mediated cellular responses, including 1) the physical determination of substrate stiffness on cell fate and tissue development; 2) the current exploited approaches to manipulate the stiffness of scaffolds; 3) the progress of recent researches to reveal the role of substrate stiffness in cellular responses in some representative tissue-engineered regeneration varying from stiff tissue to soft tissue. This article aims to provide an up-to-date overview of cell mechanobiology research in substrate stiffness mediated cellular response and tissue regeneration with insightful information to facilitate interdisciplinary knowledge transfer and enable the establishment of prognostic markers for the design of suitable biomaterials.

•

Substrate stiffness physically determines cell fate and tissue development.

•

Rational design of scaffolds requires the understanding of cell-matrix interactions.

•

Substrate stiffness depends on scaffold molecular-constituent-structure interaction.

•

Substrate stiffness-mediated cellular responses vary in different tissues.

Reconstruction of critical-size segmental defects in rat femurs using carbonate apatite honeycomb scaffolds

Critical-size segmental defects are formidable challenges in orthopedic surgery. Various scaffolds have been developed to facilitate bone reconstruction within such defects. Many previously studied scaffolds achieved effective outcomes with a combination of high cost, high-risk growth factors or stem cells. Herein, we developed honeycomb scaffolds (HCSs) comprising carbonate apatite (CO3 Ap) containing 8% carbonate, identical to human bone composition. The CO3 Ap HCSs were white-columned blocks harboring regularly arranged macropore channels of a size and wall thickness of 156 ± 5 μm and 102 ± 10 μm, respectively. The compressive strengths of the HCSs parallel and perpendicular to the macropore channel direction were 51.0 ± 11.8 and 15.6 ± 2.2 MPa, respectively. The HCSs were grafted into critical-sized segmental defects in rat femurs. The HCSs bore high-load stresses without any observed breakage. Two-weeks post-implantation, calluses formed around the HCSs and immature bone formed in the HCS interior. The calluses and immature bone matured until 8 weeks via endochondral ossification. At 12 weeks post-implantation, large parts of the HCSs were gradually replaced by newly formed bone. The bone reconstruction efficacy of the CO3 Ap HCSs alone was comparable to that of protein and cell scaffolds, while achieving a lower cost and increased safety.

Current Insights into Collagen Type I

Collagen type I (Col-I) is unique due to its high biocompatibility in human tissue. Despite its availability from various sources, Col-I naturally mimics the extracellular matrix (ECM) and generally makes up the larger protein component (90%) in vasculature, skin, tendon bone, and other tissue. The acceptable physicochemical properties of native Col-I further enhance the incorporation of Col-I in various fields, including pharmaceutical, cosmeceutical, regenerative medicine, and clinical. This review aims to discuss Col-I, covering the structure, various sources of availability, native collagen synthesis, current extraction methods, physicochemical characteristics, applications in various fields, and biomarkers. The review is intended to provide specific information on Col-I currently available, going back five years. This is expected to provide a helping hand for researchers who are concerned about any development on collagen-based products particularly for therapeutic fields.

A review of biomimetic scaffolds for bone regeneration: Toward a cell-free strategy

In clinical terms, bone grafting currently involves the application of autogenous, allogeneic, or xenogeneic bone grafts, as well as natural or artificially synthesized materials, such as polymers, bioceramics, and other composites. Many of these are associated with limitations. The ideal scaffold for bone tissue engineering should provide mechanical support while promoting osteogenesis, osteoconduction, and even osteoinduction. There are various structural complications and engineering difficulties to be considered. Here, we describe the biomimetic possibilities of the modification of natural or synthetic materials through physical and chemical design to facilitate bone tissue repair. This review summarizes recent progresses in the strategies for constructing biomimetic scaffolds, including ion-functionalized scaffolds, decellularized extracellular matrix scaffolds, and micro- and nano-scale biomimetic scaffold structures, as well as reactive scaffolds induced by physical factors, and other acellular scaffolds. The fabrication techniques for these scaffolds, along with current strategies in clinical bone repair, are described. The developments in each category are discussed in terms of the connection between the scaffold materials and tissue repair, as well as the interactions with endogenous cells. As the advances in bone tissue engineering move toward application in the clinical setting, the demonstration of the therapeutic efficacy of these novel scaffold designs is critical.

3D bioactive cell-free-scaffolds for in-vitro/in-vivo capture and directed osteoinduction of stem cells for bone tissue regeneration

Hydrophilic bone morphogenetic protein 2 (BMP2) is easily degraded and difficult to load onto hydrophobic carrier materials, which limits the application of polyester materials in bone tissue engineering. Based on soybean-lecithin as an adjuvant biosurfactant, we designed a novel cell-free-scaffold of polymer of poly(ε-caprolactone) and poly(lactide-co-glycolide)-co-polyetherimide with abundant entrapped and continuously released BMP2 for in vivo stem cell-capture and in situ osteogenic induction, avoiding the use of exogenous cells. The optimized bioactive osteo-polyester scaffold (BOPSC), i.e. SBMP-10SC, had a high BMP2 entrapment efficiency of 95.35%. Due to its higher porosity of 83.42%, higher water uptake ratio of 850%, and sustained BMP2 release with polymer degradation, BOPSCs were demonstrated to support excellent in vitro capture, proliferation, migration and osteogenic differentiation of mouse adipose derived mesenchymal stem cells (mADSCs), and performed much better than traditional BMP-10SCs with unmodified BMP2 and single polyester scaffolds (10SCs). Furthermore, in vivo capture and migration of stem cells and differentiation into osteoblasts was observed in mice implanted with BOPSCs without exogenous cells, which enabled allogeneic bone formation with a high bone mineral density and ratios of new bone volume to existing tissue volume after 6 months. The BOPSC is an advanced 3D cell-free platform with sustained BMP2 supply for in situ stem cell capture and osteoinduction in bone tissue engineering with potential for clinical translation.

Radially patterned transplantable biodegradable scaffolds as topographically defined contact guidance platforms for accelerating bone regeneration

BACKGROUND

The healing of large critical-sized bone defects remains a clinical challenge in modern orthopedic medicine. The current gold standard for treating critical-sized bone defects is autologous bone graft; however, it has critical limitations. Bone tissue engineering has been proposed as a viable alternative, not only for replacing the current standard treatment, but also for producing complete regeneration of bone tissue without complex surgical treatments or tissue transplantation. In this study, we proposed a transplantable radially patterned scaffold for bone regeneration that was defined by capillary force lithography technology using biodegradable polycaprolactone polymer.

RESULTS

The radially patterned transplantable biodegradable scaffolds had a radial structure aligned in a central direction. The radially aligned pattern significantly promoted the recruitment of host cells and migration of osteoblasts into the defect site. Furthermore, the transplantable scaffolds promoted regeneration of critical-sized bone defects by inducing cell migration and differentiation.

CONCLUSIONS

Our findings demonstrated that topographically defined radially patterned transplantable biodegradable scaffolds may have great potential for clinical application of bone tissue regeneration.

Experimental study on repair of large segmental bone defects of goat femur by nano calcium-deficient hydroxyapatite-multi (amino acid) copolymer membrane tubes

OBJECTIVE

The purpose of this study was to observe feasibility of nano calcium-deficient hydroxyapatite-multi (amino acid) copolymer (n-CDHA-MAC) membrane tubes in repairing goat femurs' large defects.

METHODS

Twelve goats were divided into two groups, whose femurs were created 30 mm segmental bone defects and then implants were performed. In experimental group, the bone defect of right femur was reconstructed by n-CDHA-MAC membrane tube, while left side was reconstructed by allogenic bone tube in control group. Every three goats were sacrificed at 4, 8, 16, 24 weeks after operation respectively. General observation, X-ray analysis, histology, Scanning electron microscope (SEM) examination and protein level comparison of BMP-2 were conducted to evaluate the effects of repairing segmental bone defects.

RESULTS

All goats recovered well from anesthesia and surgical interventions. The radiographic evaluations showed that periosteal reaction outside of the membrane tubes and allogenic bone tubes were observed 4 weeks after surgery. At 16 weeks, callus was continuously increased in experimental group, which was more obvious than control group. At 24 weeks, callus outside of the membrane tubes connected together. Histologic evaluation showed fibro-cartilage callus was evolved into bony callus in experimental group, which was more obvious than control group at 8 and 16 weeks. The protein expression level of BMP-2 increased at 4, 8 weeks and peaked at 16 weeks in experimental groups. There were statistical differences at 8 and 16 weeks (P < 0.05). At each time point in 8, 16, 24 weeks after surgery, the bending stiffness, torsional stiffness and compressive strength of the two groups were similar, and there was no significant difference (P > 0.05).

CONCLUSIONS

This novel surface degradation n-CDHA-MAC membrane tube has good ability to maintain enough membrane space, which can provide long-term and stable biomechanical support for large bone defects and integrate well with the surrounding bone.

Biomaterial Properties Modulating Bone Regeneration

Biomaterial scaffolds have been gaining momentum in the past several decades for their potential applications in the area of tissue engineering. They function as three-dimensional porous constructs to temporarily support the attachment of cells, subsequently influencing cell behaviors such as proliferation and differentiation to repair or regenerate defective tissues. In addition, scaffolds can also serve as delivery vehicles to achieve sustained release of encapsulated growth factors or therapeutic agents to further modulate the regeneration process. Given the limitations of current bone grafts used clinically in bone repair, alternatives such as biomaterial scaffolds have emerged as potential bone graft substitutes. This review summarizes how physicochemical properties of biomaterial scaffolds can influence cell behavior and its downstream effect, particularly in its application to bone regeneration.

Stem cell recruitment based on scaffold features for bone tissue engineering

Stem-cell based therapy strategies are promising approaches for the treatment of bone defects. However, extensive cell expansion steps, the low rate of cell survival and uncontrolled differentiation of stem cells transplanted into the body currently remain key challenges in advancing stem cell therapeutics. An alternative strategy is to use specifically designed bone scaffolds to recruit endogenous stem cells upon implantation and to stimulate new bone formation and remodeling. Stem cell recruitment based on scaffold features for bone tissue engineering relies on the development of scaffolds that can effectively mobilize and recruit endogenous stem cells to the implantation site. This article addresses the recent advances in the recruitment of endogenous stem cells in applications of bone scaffolds, particularly focusing on chemical modification and physical characteristic modification of the scaffold for endogenous stem cell homing and recruitment. Finally, the continuing challenges and future directions of scaffold-based stem cell recruitment are discussed.

Demineralized bone matrix scaffold modified with mRNA derived from osteogenically pre-differentiated MSCs improves bone repair

Gene therapy based on mRNA provides a promising approach for bone regeneration. Quick mRNA translation and controlled protein production could be earned by implantation of mRNA-activated scaffold in bone remodeling region. Furthermore, the expression levels of osteogenic-related mRNA in the cytoplasm of osteogenically pre-differentiated mesenchymal stem cells (MSCs) were high and the expression levels were different at different stages of osteogenically differentiated MSCs. This study intended to investigate the effect of osteoinductive-mRNAs (Oi-mRNAs), derived from osteogenically pre-differentiated MSCs at various stages (Day 1 (Oi1-mRNA), Day 3 (Oi3-mRNA), Day 7 (Oi7-mRNA), Day 14 (Oi14-mRNA) and Day 21 (Oi21-mRNA), respectively), on the osteogenic differentiation of MSCs. Further, the Oi-mRNAs combined with cationic polymer polyethylenimine (PEI) were loaded onto demineralized bone matrix (DBM) scaffold (Oi-mRNA/DBM). The results revealed that the Oi1-mRNA, Oi3-mRNA and Oi21-mRNA had no obvious effect on the osteogenic differentiation of MSCs, while the Oi7-mRNA increased the expression of alkaline phosphatase (ALP) and the Oi14-mRNA significantly promoted the expression of osteocalcin (OC) and osteopontin (OPN), and calcium deposition. In addition, the Oi14-mRNA/DBM scaffold could significantly enhance extracellular matrix (ECM) secretion and new collagen formation of MSCs. After being implanted into rat critical-sized cranium defect model, the Oi14-mRNA/DBM scaffold could promote the infiltration of cells and repair of bone defect in vivo. The DBM scaffold loaded with mRNA encoding osteoinductive protein may provide a powerful tool for bone defect repair.

Three-Dimensional Culture System of Cancer Cells Combined with Biomaterials for Drug Screening

Simple Summary

For the research and development of drug discovery, it is of prime importance to construct the three-dimensional (3D) tissue models in vitro. To this end, the enhancement design of cell function and activity by making use of biomaterials is essential. In this review, 3D culture systems of cancer cells combined with several biomaterials for anticancer drug screening are introduced.

Abstract

Anticancer drug screening is one of the most important research and development processes to develop new drugs for cancer treatment. However, there is a problem resulting in gaps between the in vitro drug screening and preclinical or clinical study. This is mainly because the condition of cancer cell culture is quite different from that in vivo. As a trial to mimic the in vivo cancer environment, there has been some research on a three-dimensional (3D) culture system by making use of biomaterials. The 3D culture technologies enable us to give cancer cells an in vitro environment close to the in vivo condition. Cancer cells modified to replicate the in vivo cancer environment will promote the biological research or drug discovery of cancers. This review introduces the in vitro research of 3D cell culture systems with biomaterials in addition to a brief summary of the cancer environment.

Functionalized cell-free scaffolds for bone defect repair inspired by self-healing of bone fractures: A review and new perspectives

Studies have demonstrated that scaffolds, a component of bone tissue engineering, play an indispensable role in bone repair. However, these scaffolds involving ex-vivo cultivated cells seeded have disadvantages in clinical practice, such as limited autologous cells, time-consuming cell expansion procedures, low survival rate and immune-rejection issues. To overcome these disadvantages, recent focus has been placed on the design of functionalized cell-free scaffolds, instead of cell-seeded scaffolds, that can reduplicate the natural self-healing events of bone fractures, such as inflammation, cell recruitment, vascularization, and osteogenic differentiation. New approaches and applications in tissue engineering and regenerative medicine continue to drive the development of functionalized cell-free scaffolds for bone repair. In this review, the self-healing processes were highlighted, and approaches for the functionalization were summarized. Also, ongoing efforts and breakthroughs in the field of functionalization for bone defect repair were discussed. Finally, a brief summery and new perspectives for functionalization strategies were presented to provide guidelines for further efforts in the design of bioinspired cell-free scaffolds.

Reconstructing Bone with Natural Bone Graft: A Review of In Vivo Studies in Bone Defect Animal Model

Bone defects caused by fracture, disease or congenital defect remains a medically important problem to be solved. Bone tissue engineering (BTE) is a promising approach by providing scaffolds to guide and support the treatment of bone defects. However, the autologous bone graft has many defects such as limited sources and long surgical procedures. Therefore, xenograft bone graft is considered as one of the best substitutions and has been effectively used in clinical practice. Due to better preserved natural bone structure, suitable mechanical properties, low immunogenicity, good osteoinductivity and osteoconductivity in natural bone graft, decellularized and demineralized bone matrix (DBM) scaffolds were selected and discussed in the present review. In vivo animal models provide a complex physiological environment for understanding and evaluating material properties and provide important reference data for clinical trials. The purpose of this review is to outline the in vivo bone regeneration and remodeling capabilities of decellularized and DBM scaffolds in bone defect models to better evaluate the potential of these two types of scaffolds in BTE. Taking into account the limitations of the state-of-the-art technology, the results of the animal bone defect model also provide important information for future design of natural bone composite scaffolds.

Micro-CT - a digital 3D microstructural voyage into scaffolds: a systematic review of the reported methods and results

BACKGROUND

Cell behavior is the key to tissue regeneration. Given the fact that most of the cells used in tissue engineering are anchorage-dependent, their behavior including adhesion, growth, migration, matrix synthesis, and differentiation is related to the design of the scaffolds. Thus, characterization of the scaffolds is highly required. Micro-computed tomography (micro-CT) provides a powerful platform to analyze, visualize, and explore any portion of interest in the scaffold in a 3D fashion without cutting or destroying it with the benefit of almost no sample preparation need.

MAIN BODY

This review highlights the relationship between the scaffold microstructure and cell behavior, and provides the basics of the micro-CT method. In this work, we also analyzed the original papers that were published in 2016 through a systematic search to address the need for specific improvements in the methods section of the papers including the amount of provided information from the obtained results.

CONCLUSION

Micro-CT offers a unique microstructural analysis of biomaterials, notwithstanding the associated challenges and limitations. Future studies that will include micro-CT characterization of scaffolds should report the important details of the method, and the derived quantitative and qualitative information can be maximized.

Demineralized Bone Scaffolds with Tunable Matrix Stiffness for Efficient Bone Integration

As a biophysical cue, matrix stiffness can decide the stem cell fate. However, most methods to construct three-dimensional (3D) scaffolds may change the 3D microstructure while altering their mechanical properties. In this study, demineralized bone matrix scaffolds with different compressive modulus (66.06 ± 27.83 MPa (high), 26.90 ± 13.16 MPa (medium), and 0.67 ± 0.14 MPa (low)) were constructed by controlling the decalcification duration (1 h, 12 h, and 5 days), respectively. The pore size and porosity have no significant difference between the scaffolds before and after decalcification. Cell experiments indicated that the low scaffolds could promote the osteogenic differentiation of bone marrow mesenchymal stem cells (MSCs) in vitro. Rat subcutaneous implantation experiments further demonstrated that the low scaffolds could efficiently improve the cell infiltration, deposition of collagen fibers, and positive osteocalcin and osteopontin expression of endogenous cells as well as angiogenesis. Finally, rabbit femoral condylar defect experiments proved that the low scaffolds could significantly promote the bone repair and integration and stromal cell derived factor-1α/CXC chemokine receptor signal pathway was essential for the stiffness-mediated bone repair. These investigations provided a novel method for fabricating 3D bone grafts with different stiffness, which is also of great significance for studying the effect of stiffness on the biological behavior of MSCs in three dimensions.

Matrix elasticity-modified scaffold loaded with SDF-1α improves the in situ regeneration of segmental bone defect in rabbit radius

The effectiveness of stem-cell based therapy has been hampered by the limited availability of stem cell sources, immune rejection, and difficulties in clinical adoption and regulatory approval. These obstacles can be partially circumvented by using in situ tissue engineering that recruits the endogenous stem/progenitor cells and provides cues to direct stem cell phenotype. Here, decellularized bone scaffold is mechanically modified by coating of collagen (Col)/hydroxyapatite (HA) mixture with optimal ratio and loaded with chemokine stromal cell-derived factor-1α (SDF-1α), in which endogenous stem cell recruitment can be improved by chemokine and stem cell fate can be regulated by matrix elasticity of the scaffold. This study shows that mesenchymal stem cells (MSCs) osteogenesis in vitro was enhanced by matrix elasticity and SDF-1α, and endogenous MSCs recruitment in subcutaneous implantation of rat was increased by the release of SDF-1α from the scaffold, and bone regeneration in rabbit large bone defect model was significantly improved by matrix elasticity and SDF-1α. In short, this study provides a new insight for developing novel engineered cell-free bone substitutes by mechanical modification for tissue engineering and regenerative medicine.

Engineering a Cell Home for Stem Cell Homing and Accommodation

Distilling complexity to advance regenerative medicine from laboratory animals to humans, in situ regeneration will continue to evolve using biomaterial strategies to drive endogenous cells within the human body for therapeutic purposes; this approach avoids the need for delivering ex vivo-expanded cellular materials. Ensuring the recruitment of a significant number of reparative cells from an endogenous source to the site of interest is the first step toward achieving success. Subsequently, making the "cell home" cell-friendly by recapitulating the natural extracellular matrix (ECM) in terms of its chemistry, structure, dynamics, and function, and targeting specific aspects of the native stem cell niche (e.g., cell-ECM and cell-cell interactions) to program and steer the fates of those recruited stem cells play equally crucial roles in yielding a therapeutically regenerative solution. This review addresses the key aspects of material-guided cell homing and the engineering of novel biomaterials with desirable ECM composition, surface topography, biochemistry, and mechanical properties that can present both biochemical and physical cues required for in situ tissue regeneration. This growing body of knowledge will likely become a design basis for the development of regenerative biomaterials for, but not limited to, future in situ tissue engineering and regeneration.

Responses of MSCs to 3D Scaffold Matrix Mechanical Properties under Oscillatory Perfusion Culture

Both fluid shear stress and matrix stiffness are implicated in bone metabolism and functional adaptation, but the synergistic action of these mechanical cues on the biological behaviors of mesenchymal stem cells (MSCs) is still not well-known. In the present work, a homemade oscillatory flow device was applied to investigate the effects of matrix stiffness on MSCs survival, distribution, and osteogenic differentiation in three-dimensional (3D) conditions. Furthermore, the flow field and cell growth in this bioreactor were theoretically simulated. The results demonstrated that oscillatory shear stress significantly increased the viability and distribution uniformity of MSCs throughout the scaffold after culture for 3 weeks. Compared to static culture, oscillatory shear stress could promote the collagen secretion, mineral deposits, and osteogenic differentiation of MSCs. The findings obtained from this work indicate that the oscillatory perfusion not only provides a higher survival rate and a more uniform distribution of cells but also facilitates osteogenic differentiation of MSCs. Oscillating perfusion bioreactor culture of MSCs in 3D scaffold with optimal matrix stiffness could offer an easy-to-use but efficient bioreactor for bone tissue engineering.

Decellularized Bone Matrix Scaffold for Bone Regeneration

Decellularized bone matrix is gaining a lot of attention as implantable biomaterials and/or biological scaffolds for bone tissue repair, and shows good clinical performance. This chapter describes the processing techniques and characterization protocols of decellularized bone. For the applications of the decellularized bone scaffold in promoting bone repair and regeneration, we discuss some of the current advances, and highlight the advantages and disadvantages of these scaffolds. Fabrication and application of the hydrogel derived from decellularized bone for bone tissue engineering are also presented.

Application of Collagen Scaffold in Tissue Engineering: Recent Advances and New Perspectives

Collagen is the main structural protein of most hard and soft tissues in animals and the human body, which plays an important role in maintaining the biological and structural integrity of the extracellular matrix (ECM) and provides physical support to tissues. Collagen can be extracted and purified from a variety of sources and offers low immunogenicity, a porous structure, good permeability, biocompatibility and biodegradability. Collagen scaffolds have been widely used in tissue engineering due to these excellent properties. However, the poor mechanical property of collagen scaffolds limits their applications to some extent. To overcome this shortcoming, collagen scaffolds can be cross-linked by chemical or physical methods or modified with natural/synthetic polymers or inorganic materials. Biochemical factors can also be introduced to the scaffold to further improve its biological activity. This review will summarize the structure and biological characteristics of collagen and introduce the preparation methods and modification strategies of collagen scaffolds. The typical application of a collagen scaffold in tissue engineering (including nerve, bone, cartilage, tendon, ligament, blood vessel and skin) will be further provided. The prospects and challenges about their future research and application will also be pointed out.

Room-temperature fabrication of a three-dimensional reduced-graphene oxide/polypyrrole/hydroxyapatite composite scaffold for bone tissue engineering

The development of tissue engineering (TE) provides a promising alternative strategy for bone healing and regeneration.