Comparative Osteogenesis of Three Clinical Bone Graft Materials: An In Vivo Study

PURPOSE

To investigate bone regeneration among three different bone graft materials in a rat calvarum model.

MATERIALS AND METHODS

A total of 24 rats had two 5-mm defects placed per calvarial. Rats were divided into four groups: bovine xenograft (XG), demineralized bone matrix (DBM), mineralized bone graft (MBG), and collagen membrane control (CC). Within each group, samples were collected at two time points: 4 weeks (T4) and 8 weeks (T8). Bone regeneration was assessed by microcomputed tomography (micro-CT) imaging and was analyzed using MATLAB software. Additionally, the fixed samples were subsequently demineralized for immunohistochemistry and histomorphometry. Slides were mounted and stained with hematoxylin and eosin (H&E) stain as well as bone morphogenetic protein 2 (BMP-2) and runt-related transcription factor 2 (RUNX2) markers. The numbers of positive cells/area were calculated for each group and analyzed.

RESULTS

At 4 weeks, DBM showed low mineral density (7.7%) compared to the control (25.2%), but increased dramatically at 8 weeks (DBM, T8 = 27.6%; CC, T8 = 27.2%). Xenograft material showed an increase in mineral desnity between T4 and T8 (XG, T4 = 25.0%; XG, T8 = 32.3%). MBG remained consistent over the 8-week trial period (MBG, T4 = 30.4%; MBG, T8 = 30.4%). BMP-2 expression was present in cells adherent to all graft materials. RUNX2 expression was also observed in cells adherent to all graft materials, indicating that during the 4- to 8-week healing period, all materials supported osteogenesis.

CONCLUSIONS

Compared to other materials, the DBM had high osteoinductive properties during the 4- to 8-week time period based on increased mineral content. All materials were associated with immunohistologic evidence of osteogenesis in the rat calvarial defect model.

Characterization of an advanced viable bone allograft with preserved native bone-forming cells

Bone grafts are widely used to successfully restore structure and function to patients with a broad range of musculoskeletal ailments and bone defects. Autogenous bone grafts are historically preferred because they theoretically contain the three essential components of bone healing (ie, osteoconductivity, osteoinductivity, and osteogenicity), but they have inherent limitations. Allograft bone derived from deceased human donors is one alternative that is also capable of providing both an osteoconductive scaffold and osteoinductive potential but, until recently, lacked the osteogenic component of bone healing. Relatively new, cellular bone allografts (CBAs) were designed to address this need by preserving viable cells. Although most commercially-available CBAs feature mesenchymal stem cells (MSCs), osteogenic differentiation is time-consuming and complex. A more advanced graft, a viable bone allograft (VBA), was thus developed to preserve lineage-committed bone-forming cells, which may be more suitable than MSCs to promote bone fusion. The purpose of this paper was to present the results of preclinical research characterizing VBA. Through a comprehensive series of in vitro and in vivo assays, the present results demonstrate that VBA in its final form is capable of providing all three essential bone remodeling properties and contains viable lineage-committed bone-forming cells, which do not elicit an immune response. The results are discussed in the context of clinical evidence published to date that further supports VBA as a potential alternative to autograft without the associated drawbacks.

Effects of demineralization mode and particle size of allogeneic bone powder on its physical and chemical properties

At present, the commonly used allogeneic bone powder in the clinic can be divided into nondemineralized bone matrix and demineralized bone matrix (DBM). Commonly used demineralizers include acids and ethylene diamine tetraacetic acid (EDTA). There may be some diversities between them. Also, the size of the bone particle can affects its cell compatibility and osteogenic ability. We produced different particle sizes i.e., < 75, 75-100, 100-315, 315-450, 450-650, and 650-1000 μm, and treated in three ways (nondemineralized, demineralized by EDTA, and demineralized by HCl). Scanning electron microscopy showed that the surface of the samples in each group was relatively smooth without obvious differences. The results of specific surface area and porosity analysis showed that they were significantly higher in demineralized bone powder than in nondemineralized bone powder, however, there was no significant difference between the two decalcification methods. The content of hydroxyproline in nondemineralized bone powder and EDTA-demineralized bone powder had no statistical difference, while HCl-demineralization had statistical significance compared with the former two, and the content increased with the decrease of particle size. The protein and BMP-2 extracted from HCl demineralized bone powder were significantly higher than that from nondemineralized bone powder and EDTA demineralized bone powder, and there were differences among different particle sizes. These results suggested the importance of demineralization mode and particle size of the allogenic bone powder and provided guidance for the choice of the most appropriate particle size and demineralization mode to be used in tissue bioengineering.

Biohybrid Bovine Bone Matrix for Controlled Release of Mesenchymal Stem/Stromal Cell Lyosecretome: A Device for Bone Regeneration

SmartBone® (SB) is a biohybrid bone substitute advantageously proposed as a class III medical device for bone regeneration in reconstructive surgeries (oral, maxillofacial, orthopedic, and oncology). In the present study, a new strategy to improve SB osteoinductivity was developed. SB scaffolds were loaded with lyosecretome, a freeze-dried formulation of mesenchymal stem cell (MSC)-secretome, containing proteins and extracellular vesicles (EVs). Lyosecretome-loaded SB scaffolds (SBlyo) were prepared using an absorption method. A burst release of proteins and EVs (38% and 50% after 30 min, respectively) was observed, and then proteins were released more slowly with respect to EVs, most likely because they more strongly adsorbed onto the SB surface. In vitro tests were conducted using adipose tissue-derived stromal vascular fraction (SVF) plated on SB or SBlyo. After 14 days, significant cell proliferation improvement was observed on SBlyo with respect to SB, where cells filled the cavities between the native trabeculae. On SB, on the other hand, the process was still present, but tissue formation was less organized at 60 days. On both scaffolds, cells differentiated into osteoblasts and were able to mineralize after 60 days. Nonetheless, SBlyo showed a higher expression of osteoblast markers and a higher quantity of newly formed trabeculae than SB alone. The quantification analysis of the newly formed mineralized tissue and the immunohistochemical studies demonstrated that SBlyo induces bone formation more effectively. This osteoinductive effect is likely due to the osteogenic factors present in the lyosecretome, such as fibronectin, alpha-2-macroglobulin, apolipoprotein A, and TGF-β.

In Vivo Biological Behavior of Polymer Scaffolds of Natural Origin in the Bone Repair Process

Autologous bone grafts, used mainly in extensive bone loss, are considered the gold standard treatment in regenerative medicine, but still have limitations mainly in relation to the amount of bone available, donor area, morbidity and creation of additional surgical area. This fact encourages tissue engineering in relation to the need to develop new biomaterials, from sources other than the individual himself. Therefore, the present study aimed to investigate the effects of an elastin and collagen matrix on the bone repair process in critical size defects in rat calvaria. The animals (Wistar rats, n = 30) were submitted to a surgical procedure to create the bone defect and were divided into three groups: Control Group (CG, n = 10), defects filled with blood clot; E24/37 Group (E24/37, n = 10), defects filled with bovine elastin matrix hydrolyzed for 24 h at 37 °C and C24/25 Group (C24/25, n = 10), defects filled with porcine collagen matrix hydrolyzed for 24 h at 25 °C. Macroscopic and radiographic analyses demonstrated the absence of inflammatory signs and infection. Microtomographical 2D and 3D images showed centripetal bone growth and restricted margins of the bone defect. Histologically, the images confirmed the pattern of bone deposition at the margins of the remaining bone and without complete closure by bone tissue. In the morphometric analysis, the groups E24/37 and C24/25 (13.68 ± 1.44; 53.20 ± 4.47, respectively) showed statistically significant differences in relation to the CG (5.86 ± 2.87). It was concluded that the matrices used as scaffolds are biocompatible and increase the formation of new bone in a critical size defect, with greater formation in the polymer derived from the intestinal serous layer of porcine origin (C24/25).

Probing short and long-range interactions in native collagen inside the bone matrix by BioSolids CryoProbe

Solid-state nuclear magnetic resonance is a promising technique to probe bone mineralization and interaction of collagen protein in the native state. However, many of the developments are hampered due to the low sensitivity of the technique. In this article, we report solid-state nuclear magnetic resonance (NMR) experiments using the newly developed BioSolids CryoProbe™ to access its applicability for elucidating the atomic-level structural details of collagen protein in native state inside the bone. We report here approximately a fourfold sensitivity enhancement in the natural abundance ¹³ C spectrum compared with the room temperature conventional solid-state NMR probe. With the advantage of sensitivity enhancement, we have been able to perform natural abundance ¹⁵ N cross-polarization magic angle spinning (CPMAS) and two-dimensional (2D) ¹ H-¹³ C heteronuclear correlation (HETCOR) experiments of native collagen within a reasonable timeframe. Due to high sensitivity, 2D ¹ H/¹³ C HETCOR experiments have helped in detecting several short and long-range interactions of native collagen assembly, thus significantly expanding the scope of the method to such challenging biomaterials.

Photobiomodulation Therapy Associated with Heterologous Fibrin Biopolymer and Bovine Bone Matrix Helps to Reconstruct Long Bones

Bone defects cause aesthetic and functional changes that affect the social, economic and especially the emotional life of human beings. This complication stimulates the scientific community to investigate strategies aimed at improving bone reconstruction processes using complementary therapies. Photobiomodulation therapy (PBMT) and the use of new biomaterials, including heterologous fibrin biopolymer (HFB), are included in this challenge. The objective of the present study was to evaluate the influence of photobiomodulation therapy on bone tibial reconstruction of rats with biomaterial consisting of lyophilized bovine bone matrix (BM) associated or not with heterologous fibrin biopolymer. Thirty male rats were randomly separated into three groups of 10 animals. In all animals, after the anesthetic procedure, a noncritical tibial defect of 2 mm was performed. The groups received the following treatments: Group 1: BM + PBMT, Group 2: BM + HFB and Group 3: BM + HFB + PBMT. The animals from Groups 1 and 3 were submitted to PBMT in the immediate postoperative period and every 48 h until the day of euthanasia that occurred at 14 and 42 days. Analyses by computed microtomography (µCT) and histomorphometry showed statistical difference in the percentage of bone formation between Groups 3 (BM + HB + PBMT) and 2 (BM + HFB) (26.4% ± 1.03% and 20.0% ± 1.87%, respectively) at 14 days and at 42 days (38.2% ± 1.59% and 31.6% ± 1.33%, respectively), and at 42 days there was presence of bone with mature characteristics and organized connective tissue. The µCT demonstrated BM particles filling the defect and the deposition of new bone in the superficial region, especially in the ruptured cortical. It was concluded that the association of PBMT with HFB and BM has the potential to assist in the process of reconstructing bone defects in the tibia of rats.

A Statistical Model to Allow the Phasing Out of the Animal Testing of Demineralised Bone Matrix Products

Demineralised bone matrix (DBM) products are complex mixtures of proteins known to influence bone growth, turnover, and repair. They are used extensively in orthopaedic surgery, and are bioassayed in vivo prior to being used in clinical applications. Many factors contribute to the osteogenic potency of DBM, but the relative contributions of these factors, as well as the possibility of interactive effects, are not completely defined. The “gold standard” measure of the therapeutic value of DBM, the in vivo assay for ectopic bone formation, is costly, time-consuming, and involves the use of numerous animal subjects. We have measured the levels of five growth factors released by the collagenase digestion of DBM, and statistically related these levels with osteogenic potency as determined by a standard in vivo model, in order to determine which value or combination of values of growth factors best predict osteogenic activity. We conclude that the level of BMP-2 is the best single predictor of osteogenic potency, and that adding the values of other growth factors only minimally increases the predictive power of the BMP-2 measurement. A small, but significant, interactive effect between BMP-2 and BMP-7 was demonstrated. We present a statistical model based on growth factor (e.g. BMP-2) analysis that best predicts the in vivo assay score for DBM. This model allows the investigator to predict which lots of DBM are likely to exhibit in vivo bioactivity and which are not, thus reducing the need to conduct in vivo testing of insufficiently active lots of DBM. This model uses cut-point analysis to allow the user to assign an estimate of acceptable uncertainty with respect to the “gold standard” test. This procedure will significantly reduce the number of animal subjects used to test DBM products.

Modulating macrophage responses to promote tissue regeneration by changing the formulation of bone extracellular matrix from filler particles to gel bioscaffolds

Extracellular matrices (ECMs) derived from native tissues/organs have been used as biomaterials for tissue engineering and regenerative medicine in a wide range of preclinical and clinical settings. The success or failure of these applications is largely contingent on the host responses to the matrices in vivo. Despite retaining their native structural and functional proteins, bone ECM-based transplants have been reported to evoke adverse immune responses in many cases; thus, optimizing the immunomodulatory properties of bone ECMs is critical for ensuring downstream regenerative outcomes. Using a simple digestion-neutralization protocol, we transformed the commonly used bone-derived filler particles into gel bioscaffolds. Instead of inducing macrophages toward proinflammatory (M1) polarization, as reported in the literature and confirmed in the present study for ECM particles, the ECM gels were found to be more likely to polarize macrophages toward regulatory/anti-inflammatory (M2) phenotypes, leading to enhanced tissue regeneration in a rat periodontal defect model. The present work demonstrates a simple, practical and economical strategy to modify the immunomodulatory properties of bone ECMs before their in vivo transplantation and hence has important implications that may facilitate the use of ECM-based bioscaffolds derived from diverse sources of tissues for regenerative purposes.

Dynamic structure and composition of bone investigated by nanoscale infrared spectroscopy

Bone is a highly organized tissue in which each structural level influences the macroscopic and microscopic mechanical behavior. In particular, the quantity, quality, and distribution of the different bone components, i.e. collagen matrix and hydroxyapatite crystals, are associated with bone strength or fragility. Common spectroscopic techniques used to assess bone composition have resolutions limited to the micrometer range. In this study, our aims were two-fold: i) to develop and validate the AFM-IR methodology for skeletal tissues and ii) to apply the methodology to sheep cancellous bone with the objective to obtain novel findings on the composition and structure of trabecular packets.To develop the methodology, we assessed spatial and temporal reproducibility using a known homogeneous material (polymethylmethacrylate, PMMA). We verified that the major peak positions were similar and not shifted when compared to traditional Fourier Transform Infrared imaging (FTIRI). When AFM-IR was applied to sheep cancellous bone, the mineral-to-matrix ratio increased and the acid phosphate substitution ratio decreased as a function of tissue maturity. The resolution of the technique enabled visualization of different stages of the bone maturation process, particularly newly-formed osteoid prior to mineralization. We also observed alternating patterns of IR parameters in line and imaging measurements, suggesting the apposition of layers of alternating structure and / or composition that were not visible with traditional spectroscopic methods. In conclusion, nanoscale IR spectroscopy demonstrates novel compositional and structural changes within trabecular packets in cancellous bone. Based on these results, AFM-IR is a valuable tool to investigate cancellous bone at the nanoscale and, more generally, to analyze small dynamic areas that are invisible to traditional spectroscopic methods.

The Role of Matrix Composition in the Mechanical Behavior of Bone

PURPOSE OF REVIEW

While thinning of the cortices or trabeculae weakens bone, age-related changes in matrix composition also lower fracture resistance. This review summarizes how the organic matrix, mineral phase, and water compartments influence the mechanical behavior of bone, thereby identifying characteristics important to fracture risk.

RECENT FINDINGS

In the synthesis of the organic matrix, tropocollagen experiences various post-translational modifications that facilitate a highly organized fibril of collagen I with a preferred orientation giving bone extensibility and several toughening mechanisms. Being a ceramic, mineral is brittle but increases the strength of bone as its content within the organic matrix increases. With time, hydroxyapatite-like crystals experience carbonate substitutions, the consequence of which remains to be understood. Water participates in hydrogen bonding with organic matrix and in electrostatic attractions with mineral phase, thereby providing stability to collagen-mineral interface and ductility to bone. Clinical tools sensitive to age- and disease-related changes in matrix composition that the affect mechanical behavior of bone could potentially improve fracture risk assessment.

Decellularized Bone Matrix Scaffold for Bone Regeneration

Decellularized bone matrix is gaining a lot of attention as implantable biomaterials and/or biological scaffolds for bone tissue repair, and shows good clinical performance. This chapter describes the processing techniques and characterization protocols of decellularized bone. For the applications of the decellularized bone scaffold in promoting bone repair and regeneration, we discuss some of the current advances, and highlight the advantages and disadvantages of these scaffolds. Fabrication and application of the hydrogel derived from decellularized bone for bone tissue engineering are also presented.

[Study on the acid hydrolysis, fiber remodeling and bionics mineralization of rat tail tendon collagen type Ⅰ]

Objective: To produce bionic bone material that is consistent with human bone in chemical composition and molecular structure using rat tail tendon collagen type Ⅰ. Methods: The type Ⅰcollagen derived from rat tail was extracted by acetic acid to form collagen fibers. The reconstructed collagen fibers were placed in the mineralized solution to mimic bone mineralization for 2-6 days. Bone mineralization was observed by transmission electron microscopy and electron diffraction.Results: Collagen fibers with characteristic D-Band structure were reconstructed by using rat tail tendon collagen type Ⅰ extracted with acid hydrolysis method. Transmission electron microscopy and electron diffraction showed that calcium hydroxyapatite precursor infiltrated into the collagen fibers, and the collagen fibers were partially mineralized after 2 days of mineralization; the collagen fibers were completely mineralized and bionic bone material of typeⅠ collagen/calcium hydroxyapatite was formed after 6 days of mineralization.Conclusion: The collagen type Ⅰ can be extracted from rat tail tendon by acid hydrolysis method, and can be reformed and mineralized to form the bionic bone material which mimics human bone in chemical composition and the molecular structure.

[BIOCOMPATIBILITY OF POROUS POLY LACTIC ACID/BONE MATRIX GELATIN COMPOSITE BIOMATERIALS FOR BONE REPAIR]

OBJECTIVE

To evaluate the biocompatibility of poiy lactic acid/bone matrix gelatin (PLA/BMG) composite biomaterial so as to lay a foundation for bone defect repair.

METHODS

Rats' MC3T3-E1 cells were cultured with leaching solution of PIJA/BMG and PLA material respectively for 7 days. The cell proliferation rate was tested by MTT and cell toxicity grading was carried out everyday. The PLA/BMG and MG3T3-E1 cells were co-cultured, the cell shape and proliferation were observed by inverted phase contrast microscope at 1, 3, and 5 days and cell adhesion by scanning electron microscope at 5 days. The PLA and PLA/BMG were implanted subcutaneously ilS Wistar rats. The histological observation was done, and the thickness of fibrous membrane, the number of inflammatory cells, and the vascularization area were measured at postoperative 2nd, 4th, and 8th week.

RESULTS

The tests for cytotoxicity in vitro showed that the cell proliferation rates were over 100% and the cell cytotoxic grades were grade 0 at 1-7 days in PLA/BMG group. While in PLA group, the cell proliferation rates were less than 100% and the cell cytotoxic grades were grade 1 at 2, 4, and 7 days. After co-culture of PLA/BMG and MC3T3-E1 cells, cells grew on the surface and in the pores of PLA! BMG, and the cellular morphology was triangle or polygon with abundant microvillus on the surface. After subcutaneous implantation, the rats survived to the end of experiment, and incision healed well. PLA was wrapped by connective tissue where there were a lot of lymphocytes and neutrophiic granulocytes. The cells and tissue grew slowly in PLA. The PLA! BMG materials were wrapped by utile connective tissue where there were a few inflammatory cells. The connective tissue growth was observed in the center of PLA/BMG. There was no significant difference in the thickness of fibrous membrane between 2 groups at each time point (P>0.05). The number of inflammatory cells of PLA/BMG group were significantly less than those in PLA group at 2, 4, and 8 weeks (P<0.05); the vascularization area was significantly larger than that in PLA group (P<0.05).

CONCLUSION

PLA/BMG composite biomaterials prepared by super critical-CO2 technique are good in cell and tissue biocompatibilty.

Ultra fast magic angle spinning solid - state NMR spectroscopy of intact bone

Ultra fast magic angle spinning (MAS) has been a potent method to significantly average out homogeneous/inhomogeneous line broadening in solid-state nuclear magnetic resonance (ssNMR) spectroscopy. It has given a new direction to ssNMR spectroscopy with its different applications. We present here the first and foremost application of ultra fast MAS (~60 kHz) for ssNMR spectroscopy of intact bone. This methodology helps to comprehend and elucidate the organic content in the intact bone matrix with resolution and sensitivity enhancement. At this MAS speed, amino protons from organic part of intact bone start to appear in (1) H NMR spectra. The experimental protocol of ultra-high speed MAS for intact bone has been entailed with an additional insight achieved at 60 kHz.

3D printed nanocomposite matrix for the study of breast cancer bone metastasis

Bone is one of the most common metastatic sites of breast cancer, but the underlying mechanisms remain unclear, in part due to an absence of advanced platforms for cancer culture and study that mimic the bone microenvironment. In the present study, we integrated a novel stereolithography-based 3D printer and a unique 3D printed nano-ink consisting of hydroxyapatite nanoparticles suspended in hydrogel to create a biomimetic bone-specific environment for evaluating breast cancer bone invasion. Breast cancer cells cultured in a geometrically optimized matrix exhibited spheroid morphology and migratory characteristics. Co-culture of tumor cells with bone marrow mesenchymal stem cells increased the formation of spheroid clusters. The 3D matrix also allowed for higher drug resistance of breast cancer cells than 2D culture. These results validate that our 3D bone matrix can mimic tumor bone microenvironments, suggesting that it can serve as a tool for studying metastasis and assessing drug sensitivity. From the Clinical Editor: Cancer remains a major cause of mortality for patients in the clinical setting. For breast cancer, bone is one of the most common metastatic sites. In this intriguing article, the authors developed a bone-like environment using 3D printing technology to investigate the underlying biology of bone metastasis. Their results would also allow a new model for other researchers who work on cancer to use.

Ratio between mature and immature enzymatic cross-links correlates with post-yield cortical bone behavior: An insight into greenstick fractures of the child fibula

As a determinant of skeletal fragility, the organic matrix is responsible for the post-yield and creep behavior of bone and for its toughness, while the mineral apatite acts on stiffness. Specific to the fibula and ulna in children, greenstick fractures show a plastic in vivo mechanical behavior before bone fracture. During growth, the immature form of collagen enzymatic cross-links gradually decreases, to be replaced by the mature form until adolescence, subsequently remaining constant throughout adult life. However, the link between the cortical bone organic matrix and greenstick fractures in children remains to be explored. Here, we sought to determine: 1) whether plastic bending fractures can occur in vitro, by testing cortical bone samples from children's fibula and 2) whether the post-yield behavior (ωp plastic energy) of cortical bone before fracture is related to total quantity of the collagen matrix, or to the quantity of mature and immature enzymatic cross-links and the quantity of non-enzymatic cross-links. We used a two-step approach; first, a 3-point microbending device tested 22 fibula machined bone samples from 7 children and 3 elderly adults until fracture. Second, biochemical analysis by HPLC was performed on the sample fragments. When pooling two groups of donors, children and elderly adults, results show a rank correlation between total energy dissipated before fracture and age and a linear correlation between plastic energy dissipated before fracture and ratio of immature/mature cross-links. A collagen matrix with more immature cross-links (i.e. a higher immature/mature cross-link ratio) is more likely to plastically deform before fracture. We conclude that this ratio in the sub-nanostructure of the organic matrix in cortical bone from the fibula may go some way towards explaining the variance in post-yield behavior. From a clinical point of view, therefore, our results provide a potential explanation of the presence of greenstick fractures in children.

Evaluation of the effect of a gamma irradiated DBM-pluronic F127 composite on bone regeneration in Wistar rat

Demineralized bone matrix (DBM) is widely used for bone regeneration. Since DBM is prepared in powder form its handling properties are not optimal and limit the clinical use of this material. Various synthetic and biological carriers have been used to enhance the DBM handling. In this study we evaluated the effect of gamma irradiation on the physical-chemical properties of Pluronic and on bone morphogenetic proteins (BMPs) amount in DBM samples. In vivo studies were carried out to investigate the effect on bone regeneration of a gamma irradiated DBM-Pluronic F127 (DBM-PF127) composite implanted in the femur of rats. Gamma irradiation effects (25 kGy) on physical-chemical properties of Pluronic F127 were investigated by rheological and infrared analysis. The BMP-2/BMP-7 amount after DBM irradiation was evaluated by ELISA. Bone regeneration capacity of DBM-PF127 containing 40% (w/w) of DBM was investigated in transcortical holes created in the femoral diaphysis of Wistar rat. Bone porosity, repaired bone volume and tissue organization were evaluated at 15, 30 and 90 days by Micro-CT and histological analysis. The results showed that gamma irradiation did not induce significant modification on physical-chemical properties of Pluronic, while a decrease in BMP-2/BMP-7 amount was evidenced in sterilized DBM. Micro-CT and histological evaluation at day 15 post-implantation revealed an interconnected trabeculae network in medullar cavity and cellular infiltration and vascularization of DBM-PF127 residue. In contrast a large rate of not connected trabeculae was observed in Pluronic filled and unfilled defects. At 30 and 90 days the DBM-PF127 samples shown comparable results in term of density and thickness of the new formed tissue respect to unfilled defect. In conclusion a gamma irradiated DBM-PF127 composite, although it may have undergone a significant decrease in the concentration of BMPs, was able to maintains bone regeneration capability.

Development of an improved bone washing and demineralisation process to produce large demineralised human cancellous bone sponges

Shaped demineralised bone matrices (DBM) made from cancellous bone have important uses in orthopaedic and dental procedures, where the properties of the material allow its insertion into confined defects, therefore acting as a void filler and scaffold onto which new bone can form. The sponges are often small in size, <1.0 cm(3). In this study, we report on an improved bone washing and demineralisation process that allows production of larger DBM sponges (3.375 or 8.0 cm(3)) from deceased donor bone. These sponges were taken through a series of warm water washes, some with sonication, centrifugation, 100 % ethanol and two decontamination chemical washes and optimally demineralised using 0.5 N hydrochloric acid under vacuum. Demineralisation was confirmed by quantitative measurement of calcium and qualitatively by compression. Protein and DNA removal was also determined. The DBM sponges were freeze dried before terminal sterilisation with a target dose of 25 kGy gamma irradiation whilst frozen. Samples of the sponges were examined histologically for calcium, collagen and the presence of cells. The data indicated lack of cells, absence of bone marrow and a maximum of 1.5 % residual calcium.

Comparing three different three-dimensional scaffolds for bone tissue engineering: an in vivo study

INTRODUCTION

Three-dimensional Scaffold structure of synthetic biomaterials with their interconnected spaces seem to be a safe and effective option in supporting bone regeneration. The aim of this animal study was to compare the effectiveness of three different biocompatible scaffolds: bioglass (BG), demineralized bone matrix (DBM) and forstrite (FR).

MATERIALS AND METHODS

Four healthy dogs were anesthetized and the first to fourth premolars were extracted atraumatically in each quadrant. After healing, linear incision was prepared from molar to anterior segment and 4 defects in each quadrant (16 defects in each dog) were prepared. Scaffold blocks of BG, DBM and FR were resized according to size of defects and placed in the 12 defects randomly, 4 defects remained as control group. The dogs were sacrificed in 4 time intervals (15, 30, 45 and 60 days after) and the percentage of different types of regenerated bones (lamellar and woven) and connective tissue were recorded in histological process. The data were analyzed by one-way ANOVA and post hoc using SPSS software Ver. 15 at significant level of 0.05.

RESULTS

In day 30th, although the amount of regenerated lamellar bone in control, DBM and BG Scaffold (22.37±3.44; 21.46±1.96; 21.21±0.96) were near to each, the FR Scaffold provided the highest amount of lamellar (29.71±7. 94) and woven bone (18.28±2.35). Also, FRS caffold showed significant difference with BG (p=0.026) and DBM Scaffolds (p=0.032) in regenerated lamellar bone.

CONCLUSION

We recommend paying more attention to FR Scaffold as a biomaterial, but it is better to be compared with other nano biomaterials in future studies.

Demineralized bone matrix combined bone marrow mesenchymal stem cells, bone morphogenetic protein-2 and transforming growth factor-β3 gene promoted pig cartilage defect repair

Objectives

To investigate whether a combination of demineralized bone matrix (DBM) and bone marrow mesenchymal stem cells (BMSCs) infected with adenovirus-mediated- bone morphogenetic protein (Ad-BMP-2) and transforming growth factor-β3 (Ad-TGF-β3) promotes the repair of the full-thickness cartilage lesions in pig model.

Methods

BMSCs isolated from pig were cultured and infected with Ad-BMP-2(B group), Ad-TGF-β3 (T group), Ad-BMP-2 + Ad-TGF-β3(BT group), cells infected with empty Ad served as a negative group(N group), the expression of the BMP-2 and TGF-β3 were confirmed by immunofluorescence, PCR, and ELISA, the expression of SOX-9, type II collagen(COL-2A), aggrecan (ACAN) in each group were evaluated by real-time PCR at 1w, 2w, 3w, respectively. The chondrogenic differentiation of BMSCs was evaluated by type II collagen at 21d with immunohistochemical staining. The third-passage BMSCs infected with Ad-BMP-2 and Ad-TGF-β3 were suspended and cultured with DBM for 6 days to construct a new type of tissue engineering scaffold to repair full-thickness cartilage lesions in the femur condyles of pig knee, the regenerated tissue was evaluated at 1,2 and 3 months after surgery by gross appearance, H&E, safranin O staining and O'driscoll score.

Results

Ad-BMP-2 and Ad-TGF-β3 (BT group) infected cells acquired strong type II collagen staining compared with Ad-BMP-2 (B group) and Ad-TGF-β3 (T group) along. The Ad-BMP-2 and Ad-TGF-β3 infected BMSCs adhered and propagated well in DBM and the new type of tissue engineering scaffold produced hyaline cartilage morphology containing a stronger type II collagen and safranin O staining, the O'driscoll score was higher than other groups.

Conclusions

The DBM compound with Ad-BMP-2 and Ad-TGF-β3 infected BMSCs scaffold has a good biocompatibility and could well induce cartilage regeneration to repair the defects of joint cartilage. This technology may be efficiently employed for cartilage lesions repair in vivo.

Vibrational spectroscopic imaging for the evaluation of matrix and mineral chemistry

Metabolic bone diseases manifesting fragility fractures (such as osteoporosis) are routinely diagnosed based on bone mineral density (BMD) measurements, and the effect of various therapies also evaluated based on the same outcome. Although useful, it is well recognized that this metric does not fully account for either fracture incidence or the effect of various therapies on fracture incidence, thus, the emergence of bone quality as a contributing factor in the determination of bone strength. Infrared and Raman vibrational spectroscopic techniques are particularly well-suited for the determination of bone quality as they provide quantitative and qualitative information of the mineral and organic matrix bone components, simultaneously. Through the use of microspectroscopic techniques, this information is available in a spatially resolved manner, thus, the outcomes may be easily correlated with outcomes from techniques such as histology, histomorphometry, and nanoindentation, linking metabolic status with material properties.

Characterization of the bone matrix and its contribution to tooth loss in human cadaveric mandibles

OBJECTIVE

It is uncertain as to what extent the major bone matrix constituents, mineral and collagen, show inter-individual variation and dependence on age and sex in jawbones. The purpose of this study was to clarify this uncertainty using cadaveric mandibles and investigate the association of bone matrix with the number of existing teeth.

MATERIALS AND METHODS

Cortical bone samples (1 × 1 cm) collected from the mental of 48 cadaveric mandibles (27 men and 21 women; age range = 56-93 years and 63-103 years, respectively) were used to quantify three bone matrix indices: mineral content, collagen content and extent of lysine hydroxylation of collagen. Associations with age and comparisons by sex were evaluated based on bone matrix indices and the numbers of existing teeth. The numbers of existing teeth were compared between the groups showing low and high bone matrix index values.

RESULTS

A great amount of inter-individual variation was seen in all bone matrix indices. No bone matrix indices were associated with age, while the number of existing teeth was negatively associated with age. The bone matrix indices and number of existing teeth did not differ by sex. The number of existing teeth was nearly twice as high in the group showing high collagen content as in the low collagen group; however, an analysis of covariance showed a significant inter-group difference not from bone matrix indices, but rather from age. Interestingly, in comparison to femoral collagen, mandibular collagen showed lower lysine hydroxylation, which can represent an aspect of bone quality.

CONCLUSIONS

Mandibular bone matrix shows great inter-individual variation and is independent of age and sex, but did not show as strong a relationship with tooth loss as age. Even so, mandibular collagen may represent a unique characteristic of bone matrix and deserves to be further investigated.

Nanostructured biomaterials from electrospun demineralized bone matrix: a survey of processing and crosslinking strategies

In the design of scaffolds for tissue engineering biochemical function and nanoscale features are of particular interest. Natural polymers provide a wealth of biochemical function, but do not have the processability of synthetic polymers, limiting their ability to mimic the hierarchy of structures in the natural extracellular matrix. Thus, they are often combined with synthetic carrier polymers to enable processing. Demineralized bone matrix (DBM), a natural polymer, is allograft bone with inorganic material removed. DBM contains the protein components of bone, which includes adhesion ligands and osteoinductive signals, such as important growth factors. Herein we describe a novel method for tuning the nanostructure of DBM through electrospinning without the use of a carrier polymer. This work surveys solvents and solvent blends for electrospinning DBM. Blends of hexafluoroisopropanol and trifluoroacetic acid are studied in detail. The effects of DBM concentration and dissolution time on solution viscosity are also reported and correlated to observed differences in electrospun fiber morphology. We also present a survey of techniques to stabilize the resultant fibers with respect to aqueous environments. Glutaraldehyde vapor treatment is successful at maintaining both macroscopic and microscopic structure of the electrospun DBM fibers. Finally, we report results from tensile testing of stabilized DBM nanofiber mats, and preliminary evaluation of their cytocompatibility. The DBM nanofiber mats exhibit good cytocompatibility toward human dermal fibroblasts (HDF) in a 4-day culture; neither the electrospun solvents nor the cross-linking results in any measurable residual cytotoxicity toward HDF.

Diversity of bone matrix adhesion proteins modulates osteoblast attachment and organization of actin cytoskeleton

Interaction of cells with extracellular matrix is an essential event for differentiation, proliferation and activity of osteoblasts. In bone, binding of osteoblasts to bone matrix is required to determine specific activities of the cells and to synthesize matrix bone proteins. Integrins are the major cell receptors involved in the cell linkage to matrix proteins such as fibronectin, type I collagen and vitronectin, via the RGD-sequences. In this study, cultures of osteoblast-like cells (Saos-2) were done on coated glass coverslips in various culture conditions: DMEM alone or DMEM supplemented with poly-L-lysine (PL), fetal calf serum (FCS), fibronectin (FN), vitronectin (VN) and type I collagen (Col-I). The aim of the study was to determine the specific effect of these bone matrix proteins on cell adherence and morphology and on the cytoskeleton status. Morphological characteristics of cultured cells were studied using scanning electron microscopy and image analysis. The heterogeneity of cytoskeleton was studied using fractal analysis (skyscrapers and blanket algorithms) after specific preparation of cells to expose the cytoskeleton. FAK and MAPK signaling pathways were studied by western blotting in these various culture conditions. Results demonstrated that cell adhesion was reduced with PL and VN after 240 min. After 60 min of adhesion, cytoskeleton organization was enhanced with FN, VN and Col-I. No difference in FAK phosphorylation was observed but MAPK phosphorylation was modulated by specific adhesion on extracellular proteins. These results indicate that culture conditions modulate cell adhesion, cytoskeleton organization and intracellular protein pathways according to extracellular proteins present for adhesion.

Heparinization of a biomimetic bone matrix: integration of heparin during matrix synthesis versus adsorptive post surface modification

This study intended to evaluate a contemporary concept of scaffolding in bone tissue engineering in order to mimic functions of the extracellular matrix. The investigated approach considered the effect of the glycosaminoglycan heparin on structural and biological properties of a synthetic biomimetic bone graft material consisting of mineralized collagen. Two strategies for heparin functionalization were explored in order to receive a three-component bone substitute material. Heparin was either incorporated during matrix synthesis by mixing with collagen prior to simultaneous fibril reassembly and mineralization (in situ) or added to the matrix after fabrication (a posteriori). Both methods resulted in an incorporation of comparable amounts of heparin, though its distribution in the matrix varied as indicated by TOF-SIMS analyses, and a similar modulation of their protein binding properties. Differential scanning calorimetry revealed that the thermal stability and thereby the degree of crosslinking of the heparinized matrices was increased. However, in contrast to the a posteriori modification, the in situ integration of heparin led to considerable changes of morphology and composition of the matrix: a more open network of collagen fibers yielding a more porous surface and a reduced mineral content were observed. Cell culture experiments with human mesenchymal stem cells (hMSC) revealed a strong influence of the mode of heparin functionalization on cellular processes, as demonstrated for proliferation and osteogenic differentiation of hMSC. Our results indicate that not only heparin per se but also the way of its incorporation into a collagenous matrix determines the cell response. In conclusion, the a posteriori modification was beneficial to support adhesion, proliferation and differentiation of hMSC.

Preparation and characterization of an advanced medical device for bone regeneration

Tridimensional scaffolds can promote bone regeneration as a framework supporting the migration of cells from the surrounding tissue into the damaged tissue and as delivery systems for the controlled or prolonged release of cells, genes, and growth factors. The goal of the work was to obtain an advanced medical device for bone regeneration through coating a decellularized and deproteinized bone matrix of bovine origin with a biodegradable, biocompatible polymer, to improve the cell engraftment on the bone graft. The coating protocol was studied and set up to obtain a continuous and homogeneous polylactide-co-glycolide (PLGA) coating on the deproteinized bone matrix Orthoss® block without occluding pores and decreasing the scaffold porosity. The PLGA-coated scaffolds were characterized for their morphology and porosity. The effects of PLGA polymer coating on cell viability were assessed with the 3-(4,5-dimethyl-2-thiazolyl)-2,5 diphenyl-2H-tetrazolium assay. The polymer solution concentration and the number of polymeric layers were the main variables affecting coating efficiency and porosity of the original decellularized bone matrix. The designed polymer coating protocol did not affect the trabecular structure of the original decellularized bone matrix. The PLGA-coated decellularized bone matrix maintained the structural features, and it improved the ability in stimulating fibroblasts attachment and proliferation.

[Tensile mechanical characteristics of decalcified cortical bone matrix]

OBJECTIVE

To evaluate the tensile mechanical characteristics of decalcified cortical bone matrix with different thicknesses so as to provide an experimental basis for the scaffold of tissue engineering.

METHODS

Decalcified cortical bone matrix was prepared from fresh bovine tibia with rapid decalcification techniques. Its physical characteristics including colour, texture, and so on, were observed. Then the decalcified rate was calculated. Decalcified cortical bone matrices were radially cut into slices with different thicknesses along longitudinal axis and divided into 4 groups: group A (100-300 microm), group B (300-500 microm), group C (500-700 microm), and group D (700-1000 microm). Then the slice specimens of each group were characterized with tensile test and histological examination.

RESULTS

General observation showed that decalcified cortical bone matrix with hydrogen peroxide treatment was ivory white with good elasticity and flexibility. The decalcified rate was 97.6%. The tensile strength and elastic modulus of groups B, C, and D were significantly higher than those of group A (P < 0.05); there was no significant difference among groups B, C, and D (P > 0.05). The stiffness in 4 groups increased gradually with the increasing thickness, it was significantly lower in group A than those in groups B, C, and D (P < 0.05), and in groups B and C than that in group D (P < 0.05). While there was no significant difference in ultimate strain within 4 groups (P > 0.05). Histologically, intact osteon was observed in every group, with an average maximum diameter of 182 microm (range, 102-325 microm).

CONCLUSION

The mechanical properties of decalcified cortical bone matrix might depend on the integrity of the osteons. Slices with thickness of 300 microm or more could maintain similar mechanical properties when decalcified cortical bone matrix is used as a scaffold for tissue engineering.

Osteoconductivity and osteoinductivity of NanoFUSE(®) DBM

Bone graft substitutes have become an essential component in a number of orthopedic applications. Autologous bone has long been the gold standard for bone void fillers. However, the limited supply and morbidity associated with using autologous graft material has led to the development of many different bone graft substitutes. Allogeneic demineralized bone matrix (DBM) has been used extensively to supplement autograft bone because of its inherent osteoconductive and osteoinductive properties. Synthetic and natural bone graft substitutes that do not contain growth factors are considered to be osteoconductive only. Bioactive glass has been shown to facilitate graft containment at the operative site as well as activate cellular osteogenesis. In the present study, we present the results of a comprehensive in vitro and in vivo characterization of a combination of allogeneic human bone and bioactive glass bone void filler, NanoFUSE(®) DBM. NanoFUSE(®) DBM is shown to be biocompatible in a number of different assays and has been cleared by the FDA for use in bone filling indications. Data are presented showing the ability of the material to support cell attachment and proliferation on the material thereby demonstrating the osteoconductive nature of the material. NanoFUSE(®) DBM was also shown to be osteoinductive in the mouse thigh muscle model. These data demonstrate that the DBM and bioactive glass combination, NanoFUSE(®) DBM, could be an effective bone graft substitute.

Delivery of demineralized bone matrix powder using a thermogelling chitosan carrier

Demineralized bone matrix (DBM) powder is widely used for bone regeneration due to its osteoinductivity and osteoconductivity. However, difficulties with handling, its tendency to migrate from graft sites, and lack of stability after surgery can sometimes limit the clinical utility of this material. In this work, the possibility of using a thermogelling chitosan carrier to deliver DBM powder was assessed. The DBM-thermogelling putty improved handling and formed a gel-like composite in situ at body temperature within a clinically relevant time period. The properties of the formed composite, including morphology, porosity, mechanical properties, equilibrium swelling as well as degradability, are significantly influenced by the ratio of DBM to thermogelling chitosan. The in vitro study showed that the alkaline phosphatase activity of C2C12 cells encapsulated in the composite was steadily increased with culture time. The in vivo study showed that increased DBM content in the DBM-thermogelling chitosan induced ectopic bone formation in a nude rat model. The diffusion of growth factor from the DBM-thermogelling chitosan as well as the host-implant interactions are discussed.

Ultrastructure of regenerated bone mineral surrounding hydroxyapatite-alginate composite and sintered hydroxyapatite

We report the ultrastructure of regenerated bone surrounding two types of biomaterials: hydroxyapatite-alginate composite and sintered hydroxyapatite. Critical defects in the calvaria of Wistar rats were filled with micrometer-sized spherical biomaterials and analyzed after 90 and 120 days of implantation by high-resolution transmission electron microscopy and Fourier transform infrared attenuated total reflectance microscopy, respectively. Infrared spectroscopy showed that hydroxyapatite of both biomaterials became more disordered after implantation in the rat calvaria, indicating that the biological environment induced modifications in biomaterials structure. We observed that the regenerated bone surrounding both biomaterials had a lamellar structure with type I collagen fibers alternating in adjacent lamella with angles of approximately 90°. In each lamella, plate-like apatite crystals were aligned in the c-axis direction, although a rotation around the c-axis could be present. Bone plate-like crystal dimensions were similar in regenerated bone around biomaterials and pre-existing bone in the rat calvaria. No epitaxial growth was observed around any of the biomaterials. A distinct mineralized layer was observed between new bone and hydroxyapatite-alginate biomaterial. This region presented a particular ultrastructure with crystallites smaller than those of the bulk of the biomaterial, and was possibly formed during the synthesis of alginate-containing composite or in the biological environment after implantation. Round nanoparticles were observed in regions of newly formed bone. The findings of this work contribute to a better understanding of the role of hydroxyapatite based biomaterials in bone regeneration processes at the nanoscale.

The enhanced modulation of key bone matrix components by modified Titanium implant surfaces

Modifications to Titanium (Ti) implant surfaces enhance osseointegration by promoting bone-implant contact and peri-implant bone accrual; which in vitro analyses of osteoblastic cells suggest is due to an enhancement in cellular phenotypic maturation and function. To evaluate these effects on uncommitted cells, this study examined the osteogenic mineralisation and phenotypic marker expression of human marrow derived stromal cells (hBMSCs) from three unrelated donors cultured on tissue culture plastic (TCP), polished (P), rough-hydrophobic (SLA) and rough-hydrophilic (modSLA) Ti surfaces over the course of 21 days. Transcriptional analyses indicated a significant early up-regulation of both Runx2 (p<0.05) and Osteopontin (OP) (p<0.05) but not Bone Sialoprotein 2 (BSP2) (p<0.05) by rough surfaces 1 day post seeding. The phenotypic analyses showed that whilst cellular proliferation was relatively restricted and slower on the rough substrates; osteogenic mineralisation, assessed by quantifying extracellular matrix calcium deposition, collagen formation and the ratio of collagen to mineral deposited were significantly higher (p<0.05); as was alkaline phosphatase (ALP) activity (p<0.05). The rough surfaces caused an increase of secreted osteoblastic markers Osteoprotegrin (OPG) (p<0.05), growth differentiation factor 15 (GDF-15) (p<0.05) and Osteocalcin (OC) (p<0.05). These findings suggest that modified Ti surfaces induce an enhancement in osteogenic commitment and differentiation, which likely underlie the deposition of more stable bone matrix early in the healing process in vivo.

Fourier transform infrared imaging of bone

Fourier transform infrared imaging (FTIRI) is a technique that can be used to analyze the material properties of bone using tissue sections. In this chapter I describe the basic principles of FTIR and the methods for capturing and analyzing FTIR images in bone sections.

Raman microscopy of bone

Raman microscopy is a non-destructive technique requiring minimal sample preparation that can be used to measure the chemical properties of the mineral and collagen parts of bone simultaneously. Modern Raman instruments contain the necessary components and software to acquire the standard information required in most bone studies. The spatial resolution of the technique is about a micron. As it is non-destructive and small samples can be used, it forms a useful part of a bone characterisation toolbox.

Ultrastructural and mineral phase characterization of the bone-like matrix assembled in F-OST osteoblast cultures

Cell cultures are often used to study bone mineralization; however, not all systems achieve a bone-like matrix formation. In this study, the mineralized matrix assembled in F-OST osteoblast cultures was analyzed, with the aim of establishing a novel model for bone mineralization. The ultrastructure of the cultures was investigated using scanning electron microscopy, atomic force microscopy, and transmission electron microscopy (TEM). The mineral phase was characterized using conventional and high-resolution TEM, energy-dispersive X-ray spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, and solid-state (31)P and (1)H nuclear magnetic resonance. F-OST osteoblast cultures presented a clear nodular mineralization pattern. The chief features of the mineralizing nodules were globular accretions ranging from about 100 nm to 1.5 μm in diameter, loaded with needle-shaped crystallites. Accretions seemed to bud from the cell membrane, increase in size, and coalesce into larger ones. Arrays of loosely packed, randomly oriented collagen fibrils were seen along with the accretions. Mineralized fibrils were often observed, sometimes in close association with accretions. The mineral phase was characterized as a poorly crystalline hydroxyapatite. The Ca/P atomic ratio was 1.49 ± 0.06. The presence of OH was evident. The lattice parameters were a = 9.435 Å and c = 6.860 Å. The average crystallite size was 20 nm long and 10 nm wide. Carbonate substitutions were seen in phosphate and OH sites. Water was also found within the apatitic core. In conclusion, F-OST osteoblast cultures produce a bone-like matrix and may provide a good model for bone mineralization studies.

A prospective, randomised, controlled trial using a Mg-hydroxyapatite - demineralized bone matrix nanocomposite in tibial osteotomy

We in vivo investigated the bone healing ability of a nanocomposite (DBSint®), constituted by biomimetic nano-structured Mg-hydroxyapatite (SINTlife®) and human demineralized bone matrix. Thirty-one subjects undergoing high tibial osteotomy for genu varus were randomly assigned to three groups: during surgery, DBSint® was inserted into nine patients, SINTlife® in thirteen patients and lyophilised bone chips, that is the routine surgery, in nine subjects. As outcome measures, clinical, radiographic and histomorphometry scores were calculated. The osseointegration was evaluated by imaging six weeks, three, six and twelve months after surgery. At six-week follow-up, DBSint® showed a significantly higher osseointegration rate in comparison with lyophilised bone chips (p = 0.008). At the same follow-up, CT-guided bone biopsies were obtained and analysed by histomorphometry: a good osteogenetic potential was demonstrated with DBSint®, as well as with SINTlife® and controls. Unresorbed material was evident with DBSint® and SINTlife®, with a significantly higher percentage in SINTlife® group. At 1-year follow-up, DBSint® was demonstrated as effective and safe as SINTlife® and lyophilized bone chips. More significant results could be obtained by continuing the clinical trial, by increasing the patient number and the study power. Eventually, the role of non-resorbed graft remnants is still unclear and requires further investigation.

Biochemical characterization of major bone-matrix proteins using nanoscale-size bone samples and proteomics methodology

There is growing evidence supporting the need for a broad scale investigation of the proteins and protein modifications in the organic matrix of bone and the use of these measures to predict fragility fractures. However, limitations in sample availability and high heterogeneity of bone tissue cause unique experimental and/or diagnostic problems. We addressed these by an innovative combination of laser capture microscopy with our newly developed liquid chromatography separation methods, followed by gel electrophoresis and mass spectrometry analysis. Our strategy allows in-depth analysis of very limited amounts of bone material, and thus, can be important to medical sciences, biology, forensic, anthropology, and archaeology. The developed strategy permitted unprecedented biochemical analyses of bone-matrix proteins, including collagen modifications, using nearly nanoscale amounts of exceptionally homogenous bone tissue. Dissection of fully mineralized bone-tissue at such degree of homogeneity has not been achieved before. Application of our strategy established that: (1) collagen in older interstitial bone contains higher levels of an advanced glycation end product pentosidine then younger osteonal tissue, an observation contrary to the published data; (2) the levels of two enzymatic crosslinks (pyridinoline and deoxypiridinoline) were higher in osteonal than interstitial tissue and agreed with data reported by others; (3) younger osteonal bone has higher amount of osteopontin and osteocalcin then older interstitial bone and this has not been shown before. Taken together, these data show that the level of fluorescent crosslinks in collagen and the amount of two major noncollagenous bone matrix proteins differ at the level of osteonal and interstitial tissue. We propose that this may have important implications for bone remodeling processes and bone microdamage formation.

Microspectroscopic evidence of cretaceous bone proteins

Low concentrations of the structural protein collagen have recently been reported in dinosaur fossils based primarily on mass spectrometric analyses of whole bone extracts. However, direct spectroscopic characterization of isolated fibrous bone tissues, a crucial test of hypotheses of biomolecular preservation over deep time, has not been performed. Here, we demonstrate that endogenous proteinaceous molecules are retained in a humerus from a Late Cretaceous mosasaur (an extinct giant marine lizard). In situ immunofluorescence of demineralized bone extracts shows reactivity to antibodies raised against type I collagen, and amino acid analyses of soluble proteins extracted from the bone exhibit a composition indicative of structural proteins or their breakdown products. These data are corroborated by synchrotron radiation-based infrared microspectroscopic studies demonstrating that amino acid containing matter is located in bone matrix fibrils that express imprints of the characteristic 67 nm D-periodicity typical of collagen. Moreover, the fibrils differ significantly in spectral signature from those of potential modern bacterial contaminants, such as biofilms and collagen-like proteins. Thus, the preservation of primary soft tissues and biomolecules is not limited to large-sized bones buried in fluvial sandstone environments, but also occurs in relatively small-sized skeletal elements deposited in marine sediments.

Loading of VEGF to the heparin cross-linked demineralized bone matrix improves vascularization of the scaffold

Deficient vascularization is one of the prominent shortcomings of porous tissue-engineering scaffolds, which results in insufficient oxygen and nutrients transportation. Here, heparin cross-linked demineralized bone matrices (HC-DBM) pre-loaded with vascular endothelial growth factor (VEGF) were designed to promote cells and new microvessels invasion into the matrices. After being chemical crosslinked with heparin by N-hydroxysuccinimide and N-(3-di-methylaminopropyl)-N'-ethylcarbodiimide, the scaffold could bind more VEGF than the non-crosslinked one and achieve localized and sustained delivery. The biological activity of VEGF binding on heparinized collagen was demonstrated by promoting endothelial cells proliferation. Evaluation of the angiogenic potential of heparinized DBM loaded with VEGF was further investigated by subcutaneous implantation. Improved angiogenesis of heparinized DBM loaded with VEGF was observed from haematoxylin-eosin staining and immunohistochemistry examination. The results demonstrated that heparin cross-linked DBM binding VEGF could be a useful strategy to stimulate cells and blood vessels invasion into the scaffolds.

In vitro and in vivo evaluation of the effects of demineralized bone matrix or calcium sulfate addition to polycaprolactone-bioglass composites

The objective of this study was to improve the efficacy of polycaprolactone/bioglass (PCL/BG) bone substitute using demineralized bone matrix (DBM) or calcium sulfate (CS) as a third component. Composite discs involving either DBM or CS were prepared by compression moulding. Bioactivity of discs was evaluated by energy dispersive X-ray spectroscopy (ESCA) and scanning electron microscopy (SEM) following simulated body fluid incubation. The closest Calcium/Phosphate ratio to that of hydroxyl carbonate apatite crystals was observed for PCL/ BG/DBM group (1.53) after 15 day incubation. Addition of fillers increased microhardness and compressive modulus of discs. However, after 4 and 6-week PBS incubations, PCL/BG/DBM discs showed significant decrease in modulus (from 266.23 to 54.04 and 33.45 MPa, respectively) in parallel with its highest water uptakes (36.3 and 34.7%). Discs preserved their integrity with only considerable weight loss (7.5-14.5%) in PCL/BG/DBM group. In vitro cytotoxicity tests showed that all discs were biocompatible.

[Construction of tissue-engineered cartilage by seeding chondrocytes on allogeneic cancellous bone matrix gelatin]

OBJECTIVE

To evaluate the use of cancellous bone matrix gelatin (BMG) combined with chondrocytes in constructing tissue-engineered cartilage by observing the growth, proliferation and differentiation of chondrocytes on allogeneic cancellous BMG.

METHODS

The articular chondrocytes isolated from a 1-month-old rabbit were multiplied to a monolayer and seeded onto cancellous BMG to construct tissue-engineered cartilage in vitro during a period of 6 weeks. Samples were taken from the construct after 1, 2, 4, and 6 weeks of culture and evaluated by histology, immunohistochemistry and transmission electron microscopy (TEM).

RESULTS

The chondrocytes excreted matrix proteoglycan and collagen on cancellous BMG. With the prolongation of the culture time, the cells proliferated in the construct and the cells in the lacunae increased. Numerous chondrocytes were present the central region of the cancellous BMG and surrounded by extracellular matrix. By 6 weeks of culture, the BMG was covered with 15-20 layers of chondrocytes and cartilaginous tissue occurred in the pores throughout the cancellous BMG. Immunohistochemical staining showed rich and evenly distributed type II collagen around the chondrocytes, and TEM revealed an ultrastructure of the chondrocyte similar to that of native chondroctyes, with abundant extracellular matrix produced around the cells.

CONCLUSION

Tissue-engineered cartilage can be constructed in vitro using allogeneic cancellous BMG combined with chondrocytes. Allogeneic cancellous BMG serves as a good scaffold material for tissue-engineered cartilage to promote the growth and proliferation of the seeded chondrocytes and allows maintenance of the differentiation phenotype of the cells.

Preserved microstructure and mineral distribution in tooth and periodontal tissues in early fossil hominin material from Koobi Fora, Kenya

The aim of this study was to explore further the preservation of tissues and the mineral distribution in 1.6 million-year-old fossil hominin material from Koobi Fora, Kenya attributed to Paranthropus boisei (KNM-ER 1817). Bone, dentine and cementum microstructure were well preserved. Electron microprobe analysis of dentine and bone revealed an F-bearing apatite. Calcite now filled the original soft tissue spaces. The average Ca/P atomic ratio was 1.93, as compared to 1.67 in biological hydroxyapatite, indicating that the Ca-content had increased during fossilization. Analytical sums for mineral content were approximately 90 wt%. Some of the remaining 10 wt% may be preserved organic material. Demineralized dentine fragments showed irregularly distributed tubules encircled with a fibrous-like electron-dense material. A similar material was observed in demineralized dentine. Within this, structures resembling bacteria were seen. In demineralized bone an electron-dense material with a fibrous appearance and a banding pattern that repeated every 64 nm, similar to that of collagen, was noted. SEM of an enamel fragment (KNM-ER 6081) showed signs of demineralization/remineralization. Retzius lines, Hunter-Schreger bands and prism cross-striations spaced 3.7-7.1.microm apart were noted. Prisms were arranged in a pattern 3 configuration and deeper areas containing aprismatic enamel were occasionally observed. We conclude that a great deal of informative microstructure and ultrastructure remains preserved in this fossil material. We also hypothesize that the high mineral content of the tissues may 'protect' parts of the organic matrix from degradation, since our findings indicate that some organic matrix may still be present.

Is bone quality associated with collagen age?

The World Health Organization defines osteoporosis as a systemic disease characterized by decreased bone tissue mass and microarchitectural deterioration, resulting in increased fracture risk. Since this statement, a significant amount of data has been generated showing that these two factors do not cover all risks for fracture. Other independent clinical factors, such as age, as well as aspects related to qualitative changes in bone tissue, are believed to play an important role. The term "bone quality" encompasses a variety of parameters, including the extent of mineralization, the number and distribution of microfractures, the extent of osteocyte apoptosis, and changes in collagen properties. The major mechanism controlling these qualitative factors is bone remodeling, which is tightly regulated by the osteoclast/osteoblast activity. We focus on the relationship between bone remodeling and changes in collagen properties, especially the extent of one posttranslational modification. In vivo, measurements of the ratio between native and isomerized C-telopeptides of type I collagen provides an index of bone matrix age. Current preclinical and clinical studies suggests that this urinary ratio provides information about bone strength and fracture risk independent of bone mineral density and that it responds differently according to the type of therapy regulating bone turnover.

Evaluation of bone matrix and demineralized bone matrix incorporated PLGA matrices for bone repair

The aim of this study was to evaluate the composite matrices prepared using Poly(lactic-co-glycolic acid)- PLGA (85:15) by incorporating human bone matrix (BM) powder or demineralized bone matrix (DBM) powder with the weight ratio of polymer: BM or DBM (75:25) to apply for bone repair. Murine Bone Marrow Stromal Cell (BMSC) attachment was studied with different time points at 30 min, 1 h, 2 h, 4 h, and 6 h for BM/PLGA, DBM/PLGA and PLGA control matrices. All types of matrices were linearly increased the BMSC attachment with the increase of time. Significantly higher number of BMSCs was attached to the both BM/PLGA and DBM/PLGA matrices after 2 h compared to the controls. If BM or DBM is incorporated into biodegradable PLGA matrices and cultured with BMSCs, those composite matrices could be potentially used for bone tissue engineering applications. In addition, particle migration and handling difficulties in DBM powder in clinical applications eliminate using a PLGA matrix. Furthermore, we have observed that DBM/PLGA matrices were structurally stronger compared to the BM/PLGA or control PLGA matrices when they exposed to physiological environment for 72 days.

Effects of masticatory movement on cranial bone mass and micromorphology of osteocytes and osteoblasts in developing rats

In order to evaluate the influence of masticatory movement on cranial bone mineral density (BMD) and osteocyte and osteoblast micromorphology, we conducted a study in rats fed with solid feed (n=10) and powdered feed (n=10). Cranial BMD was measured by dual X-ray absorptiometry (DXA). Osteocyte morphology was evaluated by light microscopy. In addition, some of the tissue was treated with EDTA-KOH to digest the bone matrix and prepare osteocyte samples. Micromorphology of the osteocytes was examined by scanning electron microscopy (SEM). Bone mineral content (BMC) was significantly higher in the solid feed group (1.86 +/- 0.11 g) than in the powdered feed group (1.63 +/- 0.09 g) (p < 0.05). In the solid feed group, the maximum masseter muscle tension when crushing solid feed was 305 +/- 46.0 N. Immunohistochemical staining with DMP-1 showed greater positive localization of DMP-1 in bone lacunae in the solid feed group than in the powdered feed group. On examination of cranial bone sections by SEM, the lacunar area was significantly larger in the solid feed group (0.64 +/- 0.08 microm2) than in the powdered feed group (0.43 +/- 0.10 microm2) (p < 0.01). In the solid feed group, adjacent osteocytes were connected through cytoplasmic branches and reticular cell processes to form a 3-dimensional structure. In the powdered feed group, connecting osteocyte processes were sparser. Results suggest that masticatory movement stimulates mediator substances involved in dynamic interactions between osteocytes, increases cranial bone mass during the developmental period and influences osteoblast, osteocyte, and lacunar micromorphology.

Surface nanofeature effects on titanium-adherent human mesenchymal stem cells

PURPOSE

Hydrofluoric acid treatment of moderately rough commercially pure titanium produced by titanium oxide (TiO2) grit blasting (OsseoSpeed) results in a surface with nanofeatures. The aim of this project was to better understand the effect of surface nanotopography on adherent osteoblastic differentiation.

MATERIALS AND METHODS

Human mesenchymal stem cells were grown on TiO2 grit-blasted and hydrofluoric acid-treated/TiO2 grit-blasted titanium coins for 1 to 28 days. The nature of the surfaces was evaluated using scanning electron microscopy, optical interferometry, and x-ray photoelectron spectrometry. Osteoblastic differentiation was measured using real-time polymerase chain reaction measurement of more than 80 mineralized tissue-associated, protein-encoding mRNAs.

RESULTS

Hydrofluoric acid-treated surfaces displayed nanofeatures of 100 nm in diameter and maintenance of micron-level topography. Adherent cell osteoblastic differentiation occurred on both surfaces but took place more rapidly and to a greater extent on hydrofluoric acid-treated surfaces. This was revealed by earlier, higher, and sustained levels of osteoinductive transcription factors (RUNX-2, SMADs), growth factors (insulin-like growth factor 2, bone morphogenetic proteins), and bone matrix proteins.

CONCLUSIONS

The superimposition of nanofeatures on a moderately rough commercially pure titanium surface is associated with marked osteoinduction and osteogenesis of adherent mesenchymal stem cells. The role of nanotopography in directing adherent cell behavior should be fully investigated.

Fourier transform infrared imaging microspectroscopy and tissue-level mechanical testing reveal intraspecies variation in mouse bone mineral and matrix composition

Fracture susceptibility is heritable and dependent upon bone morphology and quality. However, studies of bone quality are typically overshadowed by emphasis on bone geometry and bone mineral density. Given that differences in mineral and matrix composition exist in a variety of species, we hypothesized that genetic variation in bone quality and tissue-level mechanical properties would also exist within species. Sixteen-week-old female A/J, C57BL/6J (B6), and C3H/HeJ (C3H) inbred mouse femora were analyzed using Fourier transform infrared imaging and tissue-level mechanical testing for variation in mineral composition, mineral maturity, collagen cross-link ratio, and tissue-level mechanical properties. A/J femora had an increased mineral-to-matrix ratio compared to B6. The C3H mineral-to-matrix ratio was intermediate of A/J and B6. C3H femora had reduced acid phosphate and carbonate levels and an increased collagen cross-link ratio compared to A/J and B6. Modulus values paralleled mineral-to-matrix values, with A/J femora being the most stiff, B6 being the least stiff, and C3H having intermediate stiffness. In addition, work-to-failure varied among the strains, with the highly mineralized and brittle A/J femora performing the least amount of work-to-failure. Inbred mice are therefore able to differentially modulate the composition of their bone mineral and the maturity of their bone matrix in conjunction with tissue-level mechanical properties. These results suggest that specific combinations of bone quality and morphological traits are genetically regulated such that mechanically functional bones can be constructed in different ways.

Analysis of bovine-derived demineralized bone extracts

Demineralized bone factors are capable of stimulating bone regeneration through an osteoinductive mechanism and thus it has been recognized as a good bone graft. In this study, a kind of demineralized bone extracts (DBX) derived from bovine tibia by a chemical route. The extracts thus obtained were analyzed for their bio-chemical and physical properties using various techniques and results provided quite interesting insights into the demineralization process. There is no significant evidence of mineral phase associated with the connective tissue detected during chemical as well as physical testing, indicating the formation of DBX. This kind of bone extracts may used as a bone graft material and as a substrate for the growth of biomimetic apatites.

Identification of full-length dentin matrix protein 1 in dentin and bone

Dentin matrix protein 1 (DMP1) has been identified in the extracellular matrix (ECM) of dentin and bone as the processed NH(2)-terminal and COOH-terminal fragment. However, the full-length form of DMP1 has not been identified in these tissues. The focus of this investigation was to search for the intact full-length DMP1 in dentin and bone. We used two types of anti-DMP1 antibodies to identify DMP1: one type specifically recognizes the NH(2)-terminal region and the other type is only reactive to the COOH-terminal region of the DMP1 amino acid sequence. An approximately 105-kDa protein, extracted from the ECM of rat dentin and bone, was recognized by both types of antibodies; and the migration rate of this protein was identical to the recombinant mouse full-length DMP1 made in eukaryotic cells. We concluded that this approximately 105-kDa protein is the full-length form of DMP1, which is considerably less abundant than its processed fragments in the ECM of dentin and bone. We also detected the full-length form of DMP1 and its processed fragments in the extract of dental pulp/odontoblast complex dissected from rat teeth. In addition, immunofluorescence analysis showed that in MC3T3-E1 cells the NH(2)-terminal and COOH-terminal fragments of DMP1 are distributed differently. Our findings indicate that the majority of DMP1 must be cleaved within the cells that synthesize it and that minor amounts of uncleaved DMP1 molecules are secreted into the ECM of dentin and bone.